RequiredCertificate (Requested in ATC)
RequiredOEM Authorization Certificate
RequiredOEM Annual Turnover Bid to RA enabled No Note: 1. OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product during the last three years
Requiredending on 31st March of the previous financial year
Requiredshould be as indicated in the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant/Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the date of constitution/incorporation of the OEM is less than 3 year old
Requiredthe average turnover in respect of the completed financial years after the date of constitution shall be taken into account for this criteria. Three Wheeler Passenger ( 100 pieces ) Technical Specifications * As per GeM Category Specification 1/4 Specification Specification Name Values Bid Requirement (Allowed Values) Certification Certification ARAI/VRDE/ICAT Yes * Vehicle Certification ARAI/VRDE/ICAT No - * Generic Parameters Seating Capacity other than driver 3 * Vehicle kerb weight 348 * Gross Vehicle Weight 658 * Gradebility (Degree) 19 * Location of engine Rear of the vehicle * Maximum speed of vehicle (Kmph) 65 * Max Engine BHP 7.6 More than 7.6 Or higher Rated RPM at max engine HP 5000 * Max Torque (N-m) 17 More than 17.0 Or higher Rated RPM at max torque 3500 * Vehicle Emission Compliance BS-IV * Vehicle Mileage (Kmpl/kg) 25 More than 25.0 Or higher Type of Fuel Petrol Petrol Fuel Tank Capacity (Ltrs) (Kg in case of LPG/CNG) 8 * Engine Aspiration - * Cooling system Air Air Anti-air pollution measures adopted Yes Yes Electronic Control Unit (ECU) No No Battery Volt 12 * Type of Exhaust Gas Re- circulating System Other * If other
Requiredmention the type - * Lambda Sensor No * Type of Transmission Mechanical Mechanical 2/4 Type of Clutch - * Gearbox Manual * No of forward/speed gears 4 * Gear Ratio - * Type of suspension system - * Speedometer Yes * Designation of Front Wheel - * Designation of Rear Wheels - * Type of wheel rims Sheet metal Sheet metal Type of steering control Handle bar * Location of Steering Centre * Type of Front Brakes Drum * Type of Rear Brakes Drum * Head Lamp High beam Yes * Head Lamp dipped beam Yes * Front position light Yes * Tail/stop light Yes * Number plate illumination light Yes * Direction indicator lights
Requiredfront and rear Yes * Parking lights Yes * Reversing light(s) Yes * Reflex reflector rear Yes * Reflex reflector side(if provided) Yes * Hazard warning lamp (wherever applicable) Yes * Rear-view mirrors Yes * Constructional Parameters Length of chassis 2635 * Width of chassis 1300 * Wheelbase 2000 * Intended seat-back inclination No * Performance Parameters Warranty Time 12 More than 12.0 Or higher 3/4 Warranty Distance 40000 More than 40000.0 Or higher Battery Warranty 12 More than 12.0 Or higher No Of Free Service 1 * * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
