Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.4 LAdmitted-Finance | ₹39.4 L | L1 | Admitted-Finance |
| 2 | L2₹49.1 LAdmitted-Finance | ₹49.1 L | L2 | Admitted-Finance |
| 3 | Rejected-Technical | - | - | Rejected-Technical Having partial category. However affidavit as sought in NIT not uploaded. Hence rejeced. |
| Sl No | Description | Qty | Unit | NAGALAND AGENCIES CO L2 | M/S PIJUSH BHATTACHARJEE L1 |
|---|---|---|---|---|---|
| 1.00 | Design, engineering, supply, installation, testing and commissioning of 33 KV XLPE medium voltage covered cable having AAAC conductor, conforming IEC 61232 of size 1 corex99 sqmmx3run consisting of all accessories such as HT polymer insulators with provision of appropriate earthing system, suspension clamp, anchor clamp (Dead end), cable end cap, suitable tapping arrangement etc complete as per site complete all as specified and directed.
Note: (a) Contractor shall submit the design details alongwith sag calculation etc for approval by Accepting Officer before commencement of work.
(b) Successful commissioning of the entire system shall be respnsibility of the contractor. Cost of all items required for sucessful commissioning shall have deemed to be included in the quoted rate and nothing extra shall be paid on this account.
(c) Permission from NHAI during laying/fixing of cable for road crossing and area cleaning from bushes is the entire responsibility of the contractor and cost of the same shall have demmed to be included in unit quoted rate. | 1,780 | Rm | 1,450 ₹25.8 L | 1,050 ₹18.7 L |
| 2.00 | Supply and fixing HT 33 KV grade heat shrinkable jointing kit straight through type complete with jointing material and accessories suitable for single core XLPE, MVCC AI conductor cable of size 50 to 120 sqmm indoor/outdoor type complete all as specified and as directed. | 12 | Each | 24,000 ₹2.9 L | 11,860 ₹1.4 L |
| 3.00 | Supply and fixing HT 33 KV grade heat shrinkable jointing kit outdoor termination type complete with jointing material and accessories suitable for single core XLPE, MVCC AI conductor cable of size 50 to 120 sqmm indoor/outdoor type complete all as specified and as directed. | 6 | Each | 18,000 ₹1.1 L | 9,240 ₹55,440 |
| 4.00 | Supply and erection of Four Pole Structure with Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified of type 410 SP–64, 12.00m long including Anti Climbing Device, Cross Arms etc. complete all specified and as directed.
Note: Apart from above cost of the following shall also deemed to be included in quoted rate:
(a) Cost of excavation for foundation of each pole of size 0.9mx0.9mx1.8m and and removal of excavated soil to a distance not exceeding 50m and deposited where as indicated.
(b) PCC 1:4:8 type D-2, 40mm graded stone aggregates as in lean concrete laid in trench of size 0.9x0.9x0.15m.
(c) PCC 1:3:6 type C-2, 40mm graded stone aggregates as in foundation concrete laid in trench of size 0.9x0.9x1.65m.
(d) PCC 1:2:4 type B-2, 20mm graded stone aggregates as in coping concrete laid around pole of size 0.9x0.9x0.45m and finish the surface even and fair.
(e) Applying two coats of aluminium paint over a coat of red oxide primer and poles embedded in concrete shall be treated with tarring and sanding. | 1 | Each | 1,65,000 ₹1.6 L | 2,00,000 ₹2 L |
| 5.00 | Supply and fixing triple pole mechanically operated air break isolator (GOD), vertical mounting, rotating type, mounted on insulators and steel frame with operating mechanism worked from ground level complete in all respect such as gun metal moving contacts and spring loaded gun metal fixed jaws, knife copper jumper strip etc, suitable for 33000 Volts grade, with 3 insulators of rating upto 200 Amps complete all as specified and as directed. | 3 | Each | 72,000 ₹2.2 L | 26,500 ₹79,500 |
| 6.00 | Supply and fixing steel tubular swaged pole, type 410 SP 64 (Overall length 12.00 meter) conforming to IS-2713 (Part 1 to 3) 1980 complete with cast iron base plate, finial taper plug, bolts, nuts and washers, screws. Pole shall be painted with two coat of black bituminous throughout internally and externally upto planting depth and the remaining external portion shall be painted with two coats of aluminum paints over a coat of red oxide primer including painting from bottom to 1.2m height alternative with 30cm red and white strip and writing pole no with black paint on yellow background complete all as specified and as directed.
Note: Apart from above cost of the following shall also deemed to be included in quoted rate:
(a) Cost of excavation for foundation of pole of size 0.9mx0.9mx2.0m and and removal of excavated soil to a distance not exceeding 50m and deposited where as indicated.
(b) PCC 1:4:8 type D-2, 40mm graded stone aggregates as in lean concrete laid in trench of size 0.9x0.9x0.20m.
(c) PCC 1:3:6 type C-2, 40mm graded stone aggregates as in foundation concrete laid in trench of size 0.9x0.9x1.8m.
(d) PCC 1:2:4 type B-2, 20mm graded stone aggregates as in coping concrete laid around pole of size 0.9x0.9x0.45m and finish the surface even and fair. | 32 | Each | 42,000 ₹13.4 L | 43,200 ₹13.8 L |
| 7.00 | Material and labour for cross arm bracing, support, clamps and back plate fabrication from structural steel section including nuts., bolts, washers welding bending cold or hot drilling holes in any shape or size as indicated or directed by Engr-in-Charge and incl two coats of aluminium paint over a coat of zinc chrome primer complete all as specified and directed. | 2 | Qtl | 18,000 ₹36,000 | 15,650 ₹31,300 |
| 8.00 | Supply and fixing stay assembly with using 16 mm diameter of stay rod complete with accessories as shown in electrical plate No. 1 all as specified and directed. (Note: loop type insulator, stay clamps, excavation and concrete shall be measured and paid separately) | 8 | Per set | 2,400 ₹19,200 | 3,860 ₹30,880 |
| 9.00 | Material and labour for HT lightening arrestor with mountings accessories complete fixed on cross arms of two pole structure/GI flat strip and connect with same size of ACSR conductor with all fittings connected to earth strip with nut, bolt, washer transmission class having discharge capacity of 65 kilo Amps and suitable for 33000 Volts expulsion type complete all as specified and directed. | 1 | Set of three | 27,000 ₹27,000 | 26,450 ₹26,450 |
| 10.00 | Materials and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised wire of 4mm dia by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe of 15mm bore (light grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (medium grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion set all as specified and as directed.
Notes:-
(i) Main earthing strip from earth plate electrode to rest point upto length of 7.5 meters length shall deemed to be included in the unit rate quoted against this item.
(ii) On testing after completion if the desired resistenance is not obtained the contractor shall redo the earthing without any extra cost to the department. | 13 | Each set | 9,500 ₹1.2 L | 9,500 ₹1.2 L |
Updated dates
Tender Value
₹39.5 L
EMD Value
₹79,000
Closing Date
18 May 2026, 6:00 pmClosed
COL AMIT CHAUBEY
HQ 137 Wks Engr PIN 914137 c/o 99 APO
PROVN OF MEDIUM VOLTAGE COVERED CONDUCTOR (MVCC) CABLE FROM 33 KV APDCL GRID SRIKONA SUB STATION TO 33/11 KV MRS AT MASIMPUR MIL STNUNDER GE SILCHAR
2025_MES_745610_3
8076/E8
Open Tender
Civil Works
180 days
Silchar
As per tender docu
6 documents required · 6 mandatory
₹500
GE Silchar
₹79,000
20 Jun 2026
22 Apr 2026
25 May 2026
22 Apr 2026
18 May 2026
29 Apr 2026
Supply and fixing HT 33 KV grade heat shrinkable jointing kit straight through type complete with jointing material and accessories suitable for single core XLPE, MVCC AI conductor cable of size 50 to 120 sqmm indoor/outdoor type complete all as specified and as directed.
Supply and fixing HT 33 KV grade heat shrinkable jointing kit outdoor termination type complete with jointing material and accessories suitable for single core XLPE, MVCC AI conductor cable of size 50 to 120 sqmm indoor/outdoor type complete all as specified and as directed.
Supply and fixing triple pole mechanically operated air break isolator (GOD), vertical mounting, rotating type, mounted on insulators and steel frame with operating mechanism worked from ground level complete in all respect such as gun metal moving contacts and spring loaded gun metal fixed jaws, knife copper jumper strip etc, suitable for 33000 Volts grade, with 3 insulators of rating upto 200 Amps complete all as specified and as directed.
Material and labour for cross arm bracing, support, clamps and back plate fabrication from structural steel section including nuts., bolts, washers welding bending cold or hot drilling holes in any shape or size as indicated or directed by Engr-in-Charge and incl two coats of aluminium paint over a coat of zinc chrome primer complete all as specified and directed.
Supply and fixing stay assembly with using 16 mm diameter of stay rod complete with accessories as shown in electrical plate No. 1 all as specified and directed. (Note: loop type insulator, stay clamps, excavation and concrete shall be measured and paid separately)
Material and labour for HT lightening arrestor with mountings accessories complete fixed on cross arms of two pole structure/GI flat strip and connect with same size of ACSR conductor with all fittings connected to earth strip with nut, bolt, washer transmission class having discharge capacity of 65 kilo Amps and suitable for 33000 Volts expulsion type complete all as specified and directed.
Materials and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised wire of 4mm dia by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe of 15mm bore (light grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (medium grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion set all as specified and as directed. Notes:- (i) Main earthing strip from earth plate electrode to rest point upto length of 7.5 meters length shall deemed to be included in the unit rate quoted against this item. (ii) On testing after completion if the desired resistenance is not obtained the contractor shall redo the earthing without any extra cost to the department.
Please Enable Macros to View BoQ information
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.31 MB
BOQ_852810.xls
BOQ • 0.24 MB
RETENDERDOCU.pdf
Tender Documents • 1.57 MB
Download all tender documents and submit your bid