Construction of Science Block Govt. Senior Secondary School at Lagru Distt. Kangra HP

Amount

Excavation in foundation trenches etcetra. in earth work in all kinds of classification of soil such as pick work, jumper work, pick jumper work, blasting work, soft and hard blasting and doing work in saturated soil, including chiseling or wedging out rock where blasting is prohibited, or any other mixed variety of soil including shoring, strutting, de-watering and pumping or bailing out water (surface and sub soil water) upto any depth or any quantum of water including slush which may arise during dewatering, removal of slush and stacking the excavated soil clear from the edge of excavation with in all leads, as directed by Engineer-in-Charge and then returning the stacked soil in 15cm (fifteen centimeters) layers when required into plinths, sides of foundations etcetra. consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as directed by Engineer-in-Charge with in all leads and lifts, disposed earth to be levelled and neatly dressed including carriage of materials within all leads and lifts.

Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete as per HPPWD specification or as directed by Engineer-in-Charge, including carriage of materials with in all leads, lifts and other incidental. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering, strutting and propping etcetra, with wooden battens and ballies, height of propping and centering in all heights. below supporting floor to ceiling upto any height and removal of the same for in – situ reinforced concrete and plain concrete work in foundation footings, basis of columns etcetera and mass concrete or as directed by Engineer-in-Charge including carriage of materials. Within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three decimal one five millimeters)thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etcetra, with wooden battens and ballies, heights of propping and centering in all heights below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors, roofs, landings, shelves, and the like floor, etcetra. up to any thickness, up to all floor level or as directed by Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeters)thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etcetra, with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced concrete and plain concrete work in beams cantilevers, girders and lintels, sides and soffits of beams, beam haunchings, cantilevers, girders, bressumers and lintels upto any depth/thickness up to all floor level or as directed by Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals.The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government

Providing form work with steel plates 3.15mm (Three point one five millimeters)thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etcetra, with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced concrete and plain concrete work in Columns, pillars, posts and struts, (square, rectangular or polygonal in plan) in any height/thickness/depth up to all floor level, including carriage of materials within all leads or as directed by Engineer-in-Charge lifts and other incidentals. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three decimal one five millimeters)thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etcetra, with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced concrete and plain concrete work in stairs cases with slopping or stepped soffits, excluding, landing, up to all floor level or as directed by Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering, strutting and propping etcetra, with wooden battens and ballies, heights of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Vertical surfaces such as walls (any thickness) partition and the like including attached pillasters, buttresses, plinth and string courses and the like, up to all floor level, complete as per HPPWD specification or as directed by Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government..

Providing form work with steel plates 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etcetra, with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors and walls upto any width, up to all floor level or as directed by Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:6:12 (one cement isto six sand isto twelve graded crushed stone aggregate 40mm (forty millimeter) nominal size) and curing complete, excluding the cost of form work in foundation and plinth/under floors in all depths including pumping or bailing out water/dewatering and removal of slush which may arise at the time of laying under water complete as per HPPWD specifications or as directed by the Engineer-in-Charge and carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:4:8 (one cement isto four sand isto eight graded crushed stone aggregate 40mm (forty millimeter) nominal size) and curing complete, in or under water, including pumping or bailing out water/dewatering, removal of slush which may arise at the time of laying under water complete excluding the cost of form work in foundation and plinth in all depths/heights as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts. The rate inclusive of Malkhana, royality, octroi, toll tax or any taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:3:6 (one cement isto three sand isto six graded crushed stone aggregate 40mm (Forty millimeter) nominal size) and curing complete, in or under water, including pumping or bailing out water/dewatering, removal of slush which may arise at the time of laying under water complete excluding the cost of form work in foundation and plinth in all depths/heights as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts. The rate inclusive of Malkhana, royality, octroi, toll tax or any taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:5:10 (one cement isto five sand isto ten graded crushed stone aggregate 40mm (forty millimeter) nominal size) and curing complete in or under water, including pumping or bailing out water/dewatering (surface and sub-soil water) and removal of the slush which may arise at the time of laying under water, for all heights/depths and any quantum of water,excluding cost of form work and curing complete in foundation and plinth in all depths/ heights as per HPPWD specification or as per the direction and the entire satisfaction of Engineer-in-Charge, complete including carriage of materials up to all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, toll tax, sale tax or any other taxes imposed by the Government.

Providing and laying damp proof course 38mm (Thirty eight millimeters) thick with cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 12.5mm (twelve decimal five millimeter) nominal size and curing complete including cost of form work and as required at site and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts or other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Applying a coat of hot bitumen ( mexphalt 80/100 (eighty/hundred) or equivalent) using 1.70 Kgs. (one decimal seven zero Kilogramme) per square meter on damp proof course after cleaning the surface with a piece of cloth lightly soaked in kerosene oil including carriage of materials within all leads, lifts and other incidental and as per the direction of Engineer-in-Charge. The rate inclusive of Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and laying cement concrete work grade M-20 (M-Twenty) mix designed to obtain the minimum compressive strength of 20N/mm2 (Twenty newton per square millimetre) with minimum cement contents not less than 320Kg (Three hundred twenty kilogramme) per cubic metre mechanically mixed and vibrated to give smooth and even surfaces including centering and shuttering etcetera in string courses, coping, bed plates, anchor blocks plain window sills at the like as per drawing and design complete up to all heights up to all floor level as per HPPWD specification or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced concrete work Grade M-20 (Twenty) design mix to obtain the minimum compressive strength of 20 N/mm2 (twenty newton) per square millimeter) with cement contents not less than 320 kg (three hundred Twenty Killogramme) per cubic meter and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in foundation footings, bases of columns etcetera and the like mass concrete complete as per HPPWD specification or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced concrete work Grade M-20 (Twenty) mix designed to obtain the minimum compressive strength of 20 N/mm2 (twenty newton) per square millimeter) with cement contents not less than 320 Kg (three hundred twenty Killogramme) per cubic meter and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landings and shelves and their supports, balconies, beams, girders, bressumers cantilevers and the like shelves and work tops etcetera in all upto all floor level complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government

Providing and laying mechanically mixed and vibrated reinforced concrete work Grade M-20 (M-Twenty) mix designed to obtain the minimum compressive strength of 20 N/mm² (twenty newton per square millimetre) with cement contents not less than 320kg (three hundred twenty kilogramme) per cubic meter and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in columns, pillars, posts and struts in all depths/thickness and upto all floor level as per HPPWD specification or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, octroi, toll tax or any taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced concrete work Grade M-20 (M-Twenty) mix designed to obtain the minimum compressive strength of 20 N/mm² (twenty newton per square millimetre) with cement contents not less than 320kg (three hundred twenty kilogramme) per cubic meter and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in stair cases (except spiral stair cases) excluding landing but including preparing of top surface and finishing of nosing up to all floor level complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, octroi, toll tax or any taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete, grade M-20 (M-twenty) mix designed, so as to give a compressive strength of 20N/mm² (Twenty newton per square millimetre) with cement contents not less than 320Kg (three hundred twenty kilogrammes) per cubic meter including curing complete, excluding the cost of form work and reinforcement for reinforced cement concrete work in walls (any thickness but not less than 0.10 mtr.(Zero point one zero meter) including attached pilasters, buttresses, plinth and string courses etcetera from top of foundation up to all floor level, and curing complete as per HPPWD specification or as directed by Engineer-in Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, octroi, toll tax or any taxes imposed by the Government.

Providing and laying mild/Tor steel reinforcement for Reinforced Cement Concrete work including bending, binding and placing in position complete including cost of binding wire and other incidentals due for its completion up to all floor level complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Applying cement slurry on RCC Reinforced Cement Concrete slab or cement concrete work using 2.75Kg (Two point seven five kilogramme) of cement per square metre of floor area before laying cement concrete flooring including roughing, cleaning of the concrete surface complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing in reinforced cement concrete work smooth finishing of the exposed surfaces with cement mortar 1:3 (one cement isto three sand) upto all floor level complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government.

Autoclaved aerated cellular concrete block masonry 150mm (one hundred fifty millimeter) thick confirming to IS:2185 (iii) 1984 including quoin blocks, jamb blocks closer etcetra with solid concrete block of approved size made of flyash lime, gypsum and cement of magierate solution bonded together with polymer based mortar in super-structure above plinth level upto all floor level complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government.

Autoclaved aerated cellular concrete block masonry 200mm (Two hundred millimeter) thick confirming to IS:2185 (iii) 1984 including quoin blocks, jamb blocks closers etcetra with solid concrete block of approved size made of flyash lime, gypsum and cement of magierate solution bonded together with polymer based mortar in super-structure above plinth level upto all floor level complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government.

Stone filling dry hand packed tightly, under floors complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government.

Providing and fixing cabinet work made of 19mm (nineteen millimeter) thick water proof termite resistant commercial board base including base,shelves and shutters of UNIPLY/Green ply or its equivalent ISI marked IS No.1659 back side of cabinet shall be of 8mm (eight millimeter) thick with water proof ply all cut portion of shelves shall be finished with 6mm (Six millimeter) thick hard wood edging and shutter froom outside shall be finished with 1mm (one millimeter)thick lamination of approved shade complete including nickel plated bright finished piano hinges and frame of 25mm (twenty five millimeter) thick second class deodar wood complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate including Octroi, Toll Tax, Sale Tax or any other taxes imposed by the Government.

Providing 40x3mm (forty into three millimeter) flat iron hold fast 40cm (forty centimeter) long including fixing to frame with 10mm (ten millimeter) diameter bolts and nuts and wooden plugs and embedding in cement concrete block 30x10x15cm (thirty into ten into fifteen centimeter) 1:3:6 (one cement isto three sand isto six graded stone aggregate 20mm (twenty millimeter) nominal size complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government.

Providing and fixing 19mm (nineteen millimeter) thick water proof termite resistant ISI marked commercial board shutters for cup boards/S.D.B. including fixing with nickel plated bright finished piano hinges and screws as per HPPWD specifications or as per the directions of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of octroi, toll tax or any taxes imposed by the Government.

Providing and fixing 35mm (thirty five millimeter) thick factory made flush door shutters phenol bonded termite resistant and water proof interior grade commercial type core of block board construction with frames of first class hard wood and well matched commercial plyveneering with vertical grains or cross bands and face veneers on both faces of shutter including black enamelled M.S. butt hinges complete as per HPPWD specifications or as per the directions of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of octroi, toll tax or any taxes imposed by the Government.

Providing and fixing Aluminium sheet 1mm (one millimeter) thick in expansion joints vertically fixed with screws or nails complete as per HPPWD specifications or as per the directions of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of octroi, toll tax or any taxes imposed by the Government.

Providing and fixing anodized aluminium sliding door bolts, make of PILOT/Sheel or equivalent anodized transparent or dyed to required colour and shade with necessary bolts, nuts and screws etcetera complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of octroi, toll tax or any taxes imposed by the Government. 300x16mm (three hundred into sixteen millimeters).

Providing and fixing 250x16mm (two hundred fifty into sixteen millimeters) anodized aluminium sliding door bolts, make of PILOT/Sheel or equivalent anodized transparent or dyed to required colour and shade with necessary bolts, nuts and screws etcetera complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of octroi, toll tax or any taxes imposed by the Government.

Providing and fixing 200x10mm (two hundred into ten millimeters) aluminium tower bolts (Barrel type) make of pilot/sheel or equivalent anodized transparent or dyed to required colour and shade with screws etcetra complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of octroi, toll tax or any taxes imposed by the Government.

Providing and fixing 150x10mm (one hundred fifty into ten millimeter) aluminium tower bolts (Barrel type) make of pilot/sheel or equivalent anodized transparent or dyed to required colour and shade with screws etcetra complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of octroi, toll tax or any taxes imposed by the Government.

Providing and fixing 125mm (one hundred twenty five millimeters) aluminium handles make of pilot/sheel or equivalent transparent or dyed to required colour and shade with necessary screws etcetra complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, toll tax or any other taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimeters) aluminium handles make of pilot/sheel or equivalent transparent or dyed to required colour and shade with necessary screws etcetra complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, toll tax or any other taxes imposed by the Government.

Providing and fixing 150mm (one hundred fifty millimeters) bright finished hard drawn hooks and eyes complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, toll tax or any other taxes imposed by the Government.

Providing and fixing 150mm (one hundred fifty millimeters) oxidized M.S hasps and stapples (safety type) with necessary screws etc. complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, toll tax or any other taxes imposed by the Government.

Providing and fixing 65x35mm (sixty five into thirty five millimeter) special quality bright finished brass cup board locks or ward robe locks with six levers including necessary screws etcetra complete (Indian make of approved quality) as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, toll tax or any other taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimeter) bright finished brass door stopper with rubber cushion screws etcetra to suit shutter thickness complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, toll tax or any other taxes imposed by the Government.

Providing and fixing 12mm (twelve millimeters) thick and 100mm (one hundred millimeters) wide first class deodar wood pelmet with 25mm (twenty five millimeters) diametre aluminium curtain rods and brackets including fixing with 25x3mm (twenty five into three millimeters) M.S. flat 10cm (ten centimeters) long, plugs and necessary screws etcetera complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, royality, octroi, toll tax or any taxes imposed by the Government.

Providing and fixing 75mmx60mm (seventy five millimeter into sixty millimeter) secoond class deodar wood rounded hand rails in straight length complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, royality, octroi, toll tax or any taxes imposed by the Government.

Providing and laying 25mm (Twenty five millimeter) thick Mirror polished Kota stone slab 55x55cm (fifty five into fifty five centimeter) in flooring laid over 20mm (twenty millimeter) thick base of cement mortar 1:4 (one cement isto four sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete upto all floor level as per HPPWD specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government.

Providing and laying 25mm (Twenty five millimeter) thick mirror polished Kota stone slab in risers of steps, skirting dodo and pillars laid on 12mm ( twelve millimeter ) thick cement mortar 1:3 (one cement isto three sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etcetera up to all floor level, complete as per HPPWD specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Royality, Malkhana, Octroi, toll tax or any taxes imposed by the Government.

Providing and laying 20mm (twenty millimetres) thick white/green/yellow makrana marble work (table rubbed and polished) in flooring 20mm (twenty millimetres) thick base in cement mortar 1:3 (one cement is to three sand) including jointing with cement mortar 1:2 (one white cement is to two marble dust) with an admixture of pigment to match the shade of marble etcetera up to all floor level, complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts, and other incidental. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and laying upto all floor level, 300x300x20mm (three hundred into three hundred into twenty millimeters) thick automatic hydraulically compressed and polished terrazzo tiles ISI marked number IS-1237 of NTC or its equivalent in 50% (fifty percent) white and 50% (fifty percent) grey cement with marble chips of white, green,yellow and maroon shade of sizes O, B, 2 B laid in floors, treads of steps and landing on a bed of 25mm (twenty five millimetre) average thickness of cement mortar 1:6 (one cement isto six sand) and jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required) including rubbing and polising complete with silver grey shade tiles upto all floor level as per HPPWD specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government.

Providing and laying upto all floor level 20mm (twenty millimeter) thick hydraulically compressed and polished terrazzo tiles of 300x300mm (three hundred into three hundred millimeter) size of NTC or equivalent ISI marked No. 1S-1237 with marble chips of white,green,yellow and maroon shade of ,band 2B in skirting,rises of steps and dado upto any height on 10mm (Ten millimeter) thick cement plaster 1:3 (one cement: three sand) in 50% (fifty percent) white and 50% (fifty percent) grey cement jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing complete with tiles of silver grey shade complete as per HPPWD specifications or as per direction by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Royality, Malkhana, Octroi, toll tax or any other taxes imposed by the Government.

Providing and fixing 20mm (Twenty millimeter) thick acid and alkali resistant tiles of 300x300mm (three hundred into three hundred millimeter)size of NITCO/Kajaria, Rak or equivalent of approved shade and colour in flooring, treads of steps and landings laid over 12mm (twelve millimeter) thick cement mortar 1:3 (one cement isto three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required up to all floor level, complete as per HPPWD specifications or as directed by the Engineer,-in-Charge, including carriage of materials within all leads, lifts, and other incidental. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing upto all floors level, 20mm (twenty millimeters) thick acid and alkali resistant tiles of Nitco/ Kajaria or its equivalent of size 300x300mm (Three hundred into three hundred millimeters) approved make and of approved shade,in skirting, risers of steps and dado upto any height on 12mm (twelve millimeters) thick cement mortar 1:3 (one cement isto three sand) jointing with neat cement slurry mixed with pigment to match the shade of the tiles, i complete as per HPPWD specifications or as directed by the Engineer,-in-Charge, including carriage of materials within all leads, lifts, and other incidental. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and laying duro stone vitrified tile 300x300x8mm (Three hundred into three into eight millimetres) of Nitco/KAJARIA/ORIENT/BELL/RAK or its equivalent make in grey/coloured of required shade in skirting risers of steps and dado on 12mm (Twelve millimetres) thick laid in cement mortar 1:3 (One cement isto three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per HPPWD specifications or as directed by the Engineer,-in-Charge, including carriage of materials within all leads, lifts, and other incidental. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Extra for making moulded nosing in terrazo/ kota stone/marble including returned moulded ends and angle to moulding complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts, and other incidental. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and laying heavy duty precast cement concrete 60mm (sixty millimeter) thick inter locking paver blocks vibro compacted upto M-50 (M-fifty) grade including border or Kurb block grey or coloured over sub-base of concrete with 25mm (Twenty five millimeter) thick average thickness of cement mortar 1:4 (One cement isto four sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of block including curing, rubbing and polishing complete (sub base concrete floor to be paid for seperately) as per HPPWD specifications or as per direction by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Royality, Malkhana, Octroi, toll tax or any other taxes imposed by the Government.

Providing and fixing 0.60mm (zero point six zero millimeter) thick prepainted steel sheet TATA/Shakti or equivalant in roofing over steel trusses with hot dip metalic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (TWENTY) microns over 5 (five) microns primer coating to back coat of polyster of 5 (five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm ( six milimeter) diameter with prepainted limpet and rubber washer complete with all accessories as required as per direction of Engineer-In-charge including carriage of material with in all leads and lifts and other incidental . The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing ridges or hips 60cm (Sixty centimeter) overall with 0.60mm (Zero point six zero millimeter) thick prepainted steel sheet Tata/Shakti its equiement in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Twenty) microns over 5 (five) microns of primer coating +back coat of polyster of 5 (five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks and bolts and nuts 6mm (six millimeter) diameter and prepainted G.I limpet and bitumen washers complete with all accesseries as required as per direction of Engineer-in-Charge, including carriage of materials within all leads and lifts. and other incidental . The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing valleys 60cm (sixty centimeters) overall with 0.60mm (Zero point six zero millimeter) thick pre painted steel sheet in roofing (Tata/Shakti or equivalent make) with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 (twenty) microns over 5 (five) microns primer coating+back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks bolts and nuts 6mm (six millimeter) diametre with prepainted G.I limpet and bitumen washer complete with all accessories as required as per direction of Engineer-In-charge and as per HPPWD specifications, including carriage of materials within all leads, lifts, and other incidental. The rate including Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing 0.63mm (zero pint six three millimeters) thick plain GI (galvanized iron) sheet 15cm (fifteen centimeters) wide 45cm (forty five centimeters) deep over all semi-circular plain G-I sheet gutter with iron brackets 40x3mm (forty into three millimeters) size, bolts, nuts and washers etcetra. complete including making necessary connections with rain water pipe complete as per design/drawings complete as per HPPWD specifications or as directed by the Engineer-in-Charge, up to all floor level including carriage of materials within all leads, lifts and other incidentals. The rate inclusive Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing 6mm (six millimeter) thick plain asbestos cement sheet ceiling of approved quality with butt jointing and wood screws (frame work and cover fillets to be measured and paid for separately) complete as per HPPWD specifications or as directed by the Engineer-in-Charge, up to all floor level including carriage of materials within all leads, lifts and other incidentals. The rate inclusive Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing M.S. black plain sheet 1.66mm to 2.00mm (one point six six millimeter to two point zero zero millimeters) thick in facia/eaves boards/soffits /ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per HPPWD specifications or as directed by the Engineer-in-Charge, (base members of steel work shall be measured and paid for separately), including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Steel work welded in built up sections trusses and framed work completed in beams joists channels, angles, tee, flats with connecting plates or angle cleats etcetra as in trussed, purlins,main and cross beams hip and jack rafters,purlins connected to common rafters and the like in building including cutting, lifting, hoisting and placing in position complete and applying a priming coat of red lead paint complete as per HPPWD specifications oras directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Toll Tax Sales tax or any other taxes imposed by the Government:- In trusses and trussed purlins in building.

Steel work welded in built up sections trusses and framed work including cutting, hoisting fixing in position and applying a priming coat of red lead paint in gratings, framed guard bars, ladders, railing brackets and similar works complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Toll Tax Sales tax or any other taxes imposed by the Government.

Steel work welded in built up sections trusses and framed work including cutting, hoising fixing in position and applying a priming coat of red lead paint in beams joists channels, angles, tee, flats with connecting plates or angle cleats as in main and cross beams, hip and jack rafters, purlins connected to common rafters and the like as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing MS round holding down or anchor bolts with nuts and washers plates complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing plain M.S. grills of required patterns in wooden/steel frames of window etcetra. with M.S. flat square or round bars bolts and nuts or screws including welding with frame complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including of Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing on wall face100mm (one hundred millimetre) diameter PVC (polyvinyl chloride) (D-Plast) or its equivalent pipe conforming to IS code no. 13592 for rain water pipe of working pressure not less than 4.5kg (four point five kilogramme) per square meter including filling the joints with adhesive of approved make complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing 100 mm (one hundred millimeter) diameter, mild steel Holder Bat clamps of approved design to CI or SCI/P.V.C. pipes embedded in and including cement concrete blocks 10x10x10cm (ten into ten into ten centimeter) of 1:2:4 Mix (one cement isto two sand isto four graded crushed stone aggregate 20mm (Twenty millimeter) nominal size) mix and cost of cutting holes and making good the walls complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing on wall faces PVC (D-Plast) or its equivalent accessories for rain water pipes including filling the joints with approved adhesives complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government. P.V.C Plain bend 100mm (One hundred millimeter) nominal diameter.

Providing and fixing on wall faces PVC (D-Plast) or its equivalent accessories for rain water pipes including filling the joints with approved adhesives complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government. PVC plain shoes 100mm ( one hundred millimeter) nominal diameter.

Providing and fixing in position collapsible steel shutters with vertical channels 20mmx10mm x 2mm (Twenty millileter into ten millimeter into two millimeter) and braced with flat iron diagonals 20mmx5mm (Twenty millimeter into five millimeter) size with top and bottom rail of T-iron 40x40x6mm (forty into forty into six millimeter) with 38mm (thirty eight millimeter) diameter steel pulley complete with bolts and nuts locking arrangements, stoppers, handles, including applying a priming coat of red lead paint. complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing structural steel /angle iron door frames ( single rebate) manufactured from mild steel angle iron section 35x35x4mm (thirty five into thirty five into four millimeters) flapped with MS flat 50x4mm (fifty into four millimeters) welded together to make one frame including MS flat 50x4mm (fifty into four millimeters) welded at suitable intervals for holding the hold fast including hinges jambs, lock jambs, beed and if required angle thrashold of MS angle 50x25mm (fifty into twenty five millimeters) welded or rigidily fixed by mechanical means lugs with split end tails to each jamb including steel butt hinges 2.5mm (two point five millimeters) thick with a provision for locking arrangement and shock observer complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including applying a primer coat of red lead paint after pretreatment of the surface and carriage of materials within all leads, lifts and other incidentals. The rate inclusive Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing steel glazed doors, windows and ventilators of various type categorized below, fabricated of standard rolled steel sections joints, mitred, and welded with 16x3.15mm (sixteen into three decimal one five millimeters) lugs 10cm (ten centimeters) long embedded in cement concrete block 15x10x10cm ( fifteen into ten into ten centimeters) size of 1:3:6 ( one cement isto three sand isto six graded stone aggregate 20mm ( twenty millimeter) nominal size or with wooden/steel plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required and iron fitting such as handles, tower, bolts etcetra including providing and fixing of glass panes 4mm (four millimeter) thick with glazing clips and special metal sash putty of approved make complete including applying priming coat of red lead paints complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government. Fixed steel windows.

Providing and fixing steel glazed doors, windows and ventilators of various type categorized below, fabricated of standard rolled steel sections joints, mitred, and welded with 16x3.15mm (sixteen into three decimal one five millimeters) lugs 10cm (ten centimeters) long embedded in cement concrete block 15x10x10cm (fifteen into ten into ten centimeters) size of 1:3:6 (one cement isto three sand isto six graded stone aggregate 20mm (twenty millimeter) nominal size or with wooden/steel plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required and iron fitting such as handles, tower bolts etcetra including providing and fixing of glass panes 4mm (four millimeter) thick with glazing clips and special metal sash putty of approved make complete including applying priming coat of red lead paints complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.Top hung ventilator

Providing and fixing factory made double steel window side hung (one glazed other wire gauzed) including frame of channel ISLC-75 (seventy five) flapped with mild steel flat 75x4mm (seventy five into four millimeters) and 50x4mm (fifty into four millimeters) in the opening side of channel to make multi-frame and shutters of rolling steel Z-section and T-section and T hinges, handles with closing device and making provision of windows fixing, where required, with 16x3.15mm (sixteen into three point one five millimeters) lugs, 10cm (ten centimeters) long, embedded in cement concrete block 15x10x10cm (fifteen into ten into ten centimeter) size of 1:3:6 (one cement isto three sand isto six graded crushed stone aggregate 20mm (twenty millimeters) nominal size) or with wooden/steel plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required including providing and fixing of handles and tower bolts etcetra and fixing 4mm (four millimeter) thick plass panes with glazing clips and special metal sash putty of approved make for glazed shutters and metal beading with screws etcetera and including fixing of wire gauze using galvanized MS wire gauze of IS gauge designation 85-G (eighty five-G) with wire of diameter 0.56mm (zero point five six millimeters) and for fixing wire mesh with MS flat 20x3mm (twenty into three millimeters) for metal beading and screws complete for wire gauge shutter including applying a priming coat of approved steel primer after pretreatment of the surface as directed by Engineer-in-Charge including carriage of materials within all leads and lifts. complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing angle iron SDB/cup board frame manufactured from M.S. angle iron section 25mmx25mmx 5mm ( twenty five millimeter into twenty five millimeter into five millimeters) thickness including hinges- jambs, lock jamb , beed and if required angle thrashold of mild steel angle 25mm x 25mm( twenty five millimeter into twenty five millimeters) welded or rigidly fixed by mechanical means, lugs with split ends tails to each jamb including steel butt hinges 2.5mm ( two decimal five millimeters) thick with a provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental.The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government

Providing and fixing moulded hand rail of MS (mild steel) hollow pipe 50mm (fifty millimater) diameter welded in straight length over MS (mild steel) flat at top of vertical balusters including one coat of red oxide priming coat complete (M.S flat and balusters of railings shall be measured and paid separately) upto all floor level, complete as per HPPWD Specification or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, toll tax or any taxes imposed by the Government.

Providing and fixing railing for stair case having baluster of 19x19mm (Nineteen into nineteen millimeter) and 12x12mm (Twelve into twelve millimetre) M.S solid square bar baluster with a clear height of 85cm (Eighty five centimater)The spacing of 19x19mm (Nineteen into nineteen millimeter) baluster at 60cm (Sixty centimater) centre to centre embedded in cement concrete steps and 12X12mm (Twelve into twelve millimetre) baluster at 7.5cm (seven pointfive centimetre) in required pattern and welded with electric welding at top along with handrail of hollow rectangular pipe of 14(fourteen) to 16(sixteen) gauge. Vertical balluster welded/jointed with each other with M.S flat 40x6mm (forty into six millimetre) complete upto all floor level as per drawing and design including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in-Charge. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Painting two or more coats (excluding priming coat) on new steel and other metal surfaces with enamel paint other than white of approved brand and manufacture (Narolac/Asian or equivalent paints) and of approved shade brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts or other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning, oil, grease, dirt other foreign matter and sand papering and knotting with ready mixed paint brushing wood primer pink of approved brand and manufacture (Narolac/Asian paints or its equivalent) complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Painting two or more coats (excluding priming coat) on new wood and wood based surfaces with enamel paint other than white of approved brand and manufacture (Narolac/Asian or equivalent paints) and of approved shade to give an even shade including cleaning the surface of all dirt, dust and other foreign matter complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Polishing two or more coats with french polish of required shade on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

6mm (six millimeter) thick cement plaster to ceiling with cement mortar 1:3 (one cement isto three sand), up to all floor level complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and applying 15mm (fifteen millimeters) thick cement plaster with cement mortar 1:6 (one cement isto six sand) in single coat on rough side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth complete as per HPPWD specifications or as per direction by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and applying 15mm (fifteen millimeters) thick cement plaster with cement mortar 1:6 (one cement isto six sand) in single coat on fair side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth complete as per HPPWD specifications or as per direction by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Applying Birla White/J.K white (two or more coats) wall care putty over plastered surfaces after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final finish to the surface complete upto all floor level as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and applying distempering (two or more coats) with dry distemper of approved brand and manufacture (Nerolac/Asian or equivalent make) and of required shade on un-decorated/wall/ceiling and / or sloped roof to give an even shade over and including primer coat of whiting of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth upto all floor level as per HPPWD specification or as per the direction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate including Sales tax, Toll tax or any other taxes imposed by the Government

Providing and applying distempering (two or more coats) with oil bound washable distemper of approved brand and manufacture (Nerolac/Asian or equivalent make) and of required shade on un-decorated wall surfaces to give an even shade over and including a priming coat with distemper, primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth upto all floor level as per HPPWD specification or as per the direction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate including Sales tax, Toll tax or any other taxes imposed by the Government

Wall painting (two or more coats) with plastic emulsion paint of approved brand and manufacture (Asian/Narolac or equivalent paints) for interior grade on undecorated concrete/stone /plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for making the surface complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Finishing wall with weather proof exterior grade emulsion paint of Apex/Ultima of Asian/Nerolac paints or its equivalent of approved brand and manufacture and of required shade on undecorated wall surfaces (two or more coats) to give an even shade and final finish after throughly brushing the surface to remove all dirt, dust and other foregin matter including sand papered smooth and applying of putty as required for making the surface complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and laying plinth protection 50mm (fifty millimeters) thick cement concrete 1:3:6 (one cement isto three sand isto six graded crushed stone aggregate 20mm (twenty millimeters nominal size) including finishing the top surfaces of concrete smooth as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and laying under layer for plinth protection of 75mm (Seventy five millimeters) thick (unconsolidated) bed of dry brick/stone aggregate 40mm (Forty millimeters) nominal size well rammed and consolidated and grouted with fine sand including preparation of ground complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Constructing course rubble hammer dressed ‘U’-shape open surface drain with side wall 15x22cm (fifteen into twenty two centimeters) in cement mortar 1:6 (one cement is to six sand) and in side plastering with cement mortar 1:3 (one cement is to three sand) including earth work and laying 10cm (ten centimeters) cement concrete in 1:5:10 (one cement isto five sand isto ten graded crushed stone aggregate 40mm (forty millimeters) nominal size) and 7.5cm (seven point five centimeters) cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm (twenty millimeters) nominal size) and finished with a floating coat of neat cement complete as per standard design and drawings and HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing ISI marked, vitreous china 510x430x203mm (Five hundred ten into four hundred thirty into two hundred three millimeters) laboratory sink of CERA or its equivalents with C.I or M.S brackets painted white including cutting holes in walls and making good the same complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing 32mm (thirty two millimeters) nominal diameters C.P. brass waste of Prayag/Hind ware/CERA or its equivalent for wash basin or sink complete including carriage of materials within all leads, lifts and other incidental. The rate including Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing 32mm (thirty two millimeters) nominal diameters PVC waste pipe for wash basin or sink including brass check nut complete and carriage of materials within all leads, lifts and other incidental. The rate including Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing chromium plated brass soap dish of CERA/Hind ware/Prayag or its equivalent with C.P. brass brackets fixed to wooden cleats with C.P. brass screws complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing CERA/HINDWARE/PRAYAG or its equivalent 15mm (Fifteen millimeters) diameters C.P. brass Pillar tap with capstan head complete upto all floor level as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) diameter brass stop cock complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing 20mm (Twenty millimeter) diameter brass stop cock complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) diameter C.P (Chromium plated) stop cock of CERA/HINDWARE/ PRAYAG or its equivalent complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing ISI marked 45cm (forty five centimeters) long and 15mm (fifteen millimeters) nominal bore PVC connection pipe with brass unions complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing brass full way valve with wheel complete upto all floor level as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government 15mm (Fifteen millimeters) nominal bore.

Providing and fixing brass full way valve with wheel complete upto all floor level as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government 20mm (Twenty millimeters) nominal bore.

Providing and fixing brass ball valve (horizontal plunger type) high pressure with polythene plastic float complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax or any other taxes imposed by the Government (15mm (Fifteen millimeters) nominal bore.

Providing and fixing ferrule including boring and taping the main complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax or any other taxes imposed by the Government (15mm (Fifteen millimeters) nominal bore.

Constructing man hole with RCC top slab in cement concrete 1:2:4 (one cement isto two sand isto four graded stone aggregate 20mm (twenty millimeters) nominal size) mix foundation concrete 1:4:8(one cement isto four sand isto eight graded crushed stone aggregate 40mm (forty millimeter) nominal size) inside plastering 15mm (fifteen millimeters) thick with cement mortar 1:3 (one cement isto three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm (twenty millimeter) nominal size) finished smooth complete including curing and testing. Inside size 800x800mm (eight hundred into eight hundred millimeter) and 500mm (five hundred millimeter) deep any depth including C.I. cover with frame (light duty single seal pattern-I) 455mmx610mm (four hundred fifty five millimeters into six hundred ten millimeters) internal dimensions total weight of cover and frame to be not less than 38 kg (thirty eight kilogramme) (weight of cover 23 kg (twenty three kilogramme) and weight of frame 15 kgs (fifteen kilogramme) with 200mm (Two hundred millimeter) thick walls of brick masonry using second class common burnt clay building bricks in cement mortar 1:3 (one cement isto three sand) complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials leads, lifts and other incidentals. The rate including Octroi Sales tax, Toll tax or any other taxes imposed by the Government.

Constructing man hole with RCC top slab in cement concrete 1:2:4 (one cement isto two sand isto four graded stone aggregate 20mm (twenty millimeters) nominal size) mix foundation concrete 1:4:8(one cement isto four sand isto eight graded crushed stone aggregate 40mm (forty millimeter) nominal size) inside plastering 15mm (fifteen millimeters) thick with cement mortar 1:3 (one cement isto three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm (twenty millimeter) nominal size) finished smooth complete including curing and testing. Inside size 800x800mm (eight hundred into eight hundred millimeter) and upto any depth including C.I. cover with frame (light duty single seal pattern-I) 455mmx610mm (four hundred fifty five millimeters into six hundred ten millimeters) internal dimensions total weight of cover and frame to be not less than 38 kg (thirty eight kilogramme) (weight of cover 23 kg (twenty three kilogramme) and weight of frame 15 kgs (fifteen kilogramme) with 200mm (Two hundred millimeter) thick walls of brick masonry using second class common burnt clay building bricks in cement mortar 1:3 (one cement isto three sand) complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials leads, lifts and other incidentals. The rate including Octroi Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing stone ware gully trap grade ‘A’ complete with cast iron grating and brick masonry chamber in cement mortar 1:5 (one cement isto five sand) and water tight C.I. (cast iron) cover with frame of 300mmx300mm (three hundred millimeter into three hundred millimeter) size (inside) the weight of cover to be not less than 4.53kg (four point five three kilogramme) and frame to be not less than 2.72 kg (Two point seven two kilogramme) square mouth trap 100mmx100mm (one hundred millimeter into one hundred millimeter) size P Type. complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials leads, lifts and other incidentals. The rate including Octroi Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing to wall ceiling and floor ISI marked 15mm (Fifteen millimeters) nominal bore galvanized mild steel tubes (medium grade) tube fittings and clamps of approved brand and manufacture including making good the walls, ceiling and floor, up to all floor levels complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing to wall ceiling and floor ISI marked 20mm (Twenty millimeters) nominal bore galvanized mild steel tubes (medium grade) tube fittings and clamps of approved brand and manufacture including making good the walls, ceiling and floor, up to all floor levels complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing to wall, ceiling and floor ploythelene aluminium ploythelene (PE.AL.PE) composite pressure pipe U.V stabilized with carbon black and fittings of kitec confirming to ISI 15450-2004 for water supply including clamps with one metre spacing complete with necessary pipe fitting including cutting, fixing and making good the walls, ceiling and floor complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax, Sales tax or any other taxes imposed by the Government. 1620 (20mm (Twenty millimeter) outer diameter pipe)

Providing and fixing I.S.I marked high pressure PVC spigot and socket soil, waste and ventilating pipes of supreme or confirming to IS No.13592-92 ISI marked or its equivalent including fixing with approved adhessive complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax, Sales tax or any other taxes imposed by the Government. 100mm (One hundred millimeter) diameter

Providing and laying in trenches I.S.I marked high pressure PVC spigot and socket, soil, waste, ventilaing pipe of supreme or its equivalent conforming to IS No. 13592-92 including fixing with approved adhesive complete as per HPPWD specifications or as directed by the Engineer-in-Charge, (earth work in trenches to be measured and paid for separately) including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax, Sales tax or any other taxes imposed by the Government. 150mm (one hundred fifty millimeter) nominal diameter.

Providing and fixing PVC D-Plast or its equivalent door bend with oval access door, insertion rubber washer 3mm (three millimeter) thick bolts and nuts ISI marked complete including fixing with approved adhesive etcetra complete and carriage of materials with in all leads, lifts and other incidentals The rate including Sales tax, Toll tax or any other taxes imposed by the Government. 100mm (One hundred millimeter) nominal diameter.

Providing and fixing PVC D-Plast or its equivalent single equal branch plain ISI marked including fixing with approved adhesive etcetra complete and carriage of materials with in all leads, lifts and other incidentals The rate including Sales tax, Toll tax or any other taxes imposed by the Government. 100mm (One hundred millimeter) nominal diameter.

Providing and fixing P.V.C M.S stay and clamps ISI marked of approved design with screws for PVC/ sand cast iron pipe complete including carriage of materials with in all leads, lifts and other incidentals The rate including Sales tax, Toll tax or any other taxes imposed by the Government. 100mm (One hundred millimeter size) diameter.

Providing and fixing ISI marked 110x75mm (one hundred ten into seventy five millimeters) nominal size P.V.C floor trap of self cleaning design complete including fixing with approved adhesive cost of cutting and making good the walls and floors etcetra complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and placing three layered PVC water storage tank, ISI marked 12701 sintex or its equivalent make and of having capacity 1000ltr. (One thousand liters) complete in all respects, with necessary fittings including G.I inlet and outlet connection over flow pipe 15mm (Fifteen millimetre) nominal bore ball valve, PVC cover with locking arrangement including hosting upto all heights above ground level and providing pads of sizes as required for inlet and outlet complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Octroi Sales tax, Toll tax or any other taxes imposed by the Government.

Excavation in drains and channels etcetera in earth work in all kinds of classification of soil such as pick work, jumper work, blasting work, pick jumper blasting work, hard blasting work including chiseling or wedging out rock where blasting is prohibited and doing work in saturated soil including cost of shoring, strutting and pumping or bailing out water (surface and sub soil water) upto any depth and any quantum of water including clearing of slush which may arise out during dewatering including dressing of sides and bed and disposing of all excavated earth up to any leads and lifts, disposed earth to be levelled and neatly dressed or as per directions of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate including Octroi Sale tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing ISI marked, 100mm (One hundred millimeters) diameter sand cast iron grating for gully, floor or Nahni trap complete upto all floor level as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Octroi Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and laying cement concrete 1:5:10 (one cement isto five sand isto ten graded crushed stone aggregate 40mm (forty millimeter) nominal size, bedding for P.V.C/stone ware pipes of internal diameter 150mm (One hundred fifty millimeters) including necessary form work and curing complete and carriage of materials within all leads , lifts and other incidental. The rate including Octroi Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and laying C.I manhole cover with frame. The weight of cover and frame to be not less than 38 kg (thirty eight kilogramme) (weight of cover 23kg (Twenty three kilogramme) and weight of frame 15kgs (fifteen kilogramme) for internal dimension of manhole cover 455x610mm (Four hundred fifty five into six hundred ten millimeters) complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate including Octroi Sale tax, Toll tax or any other taxes imposed by the Government.

Providing and laying 100mm (One hundred millimeter) diameter polyvinyl chloride (D-Plast or its equivalent) pipe of working pressure not less than 4.5kg (four point five kilogramme) per square meter including filling the joints with adhesive of approved make complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

SANDEEP SHARMA