Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.0 LAccepted-AOC 0 BEECHPARA DANGAURA MAHENDRAGARH MANENDRAGARH CHIRMIRI BHARATPUR CHHATTISGARH 497442 | KOREA | CHHATTISGARH | 497442 | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹46.0 L+₹21,271 (0.46%)Rejected-Finance MARYADA 111 SHIKARGARH KANHAIYA NAGAR JODHPUR 342001 | JODHPUR | RAJASTHAN | 342001 | L2 | Rejected-Finance Rejected being L2 | |
| 3 | L3₹48.4 L+₹2.6 L (5.58%)Rejected-Finance | L3 | Rejected-Finance Rejected being L3 |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
17 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (ARMY) CENTRAL JODHPUR
GE ARMY CENTRAL MULTAN LINES ARMY AREA JODHPUR
SPL REPAIR TO OR MD ACCN BLDG NO P 200 1 TO 6 LANCER LINE II AND BLDG NO 61 07 DINING HALL OF EME BN IN THE AREA OF AGE B R II UNDER GE ARMY CENTRAL JODHPUR
2022_MES_546555_1
GE/J/A OF 2022-23 (9132/E8)
Open Tender
Civil Works
Item Rate
180 days
JODHPUR
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (ARMY) CENTRAL JODHPUR
₹98,000
Yes
29 Sept 2022
20 Aug 2022
22 Sept 2022
20 Aug 2022
17 Sept 2022
3 Sept 2022
Amount
Note:- (i) All items in BOQ are for "Materials and labour / Supply and fix" and to be executed in "Replacement/Renewal" unless otherwise specifically mentioned as "Supply only" or Fixing only" in BOQ Bidders are requested to quote their rates accordingly.
B/R WORK Demolition of Cement concrete in ground floors and pavings not exc 15cm thickness below or above ground level) and removing debris out of MD land, complete all as specified and as directed by Engr-in-Charge.
M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base of flooring, path, sub foundation etc, complete all as specified and as directed by Engr-in-Charge.
M&L 50mm thick PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection finished complete including forming joints in 2 mtr interval including necessary formwork laid in alternate bays and filled with bitumen mastic 1 part bitumen and 1 part of sand, complete all as specified and as directed by Engr-in-Charge.
Supply and laying machine pressed / factory made chamfered edge cement concrete rubberised interlocking paver block, 60mm thick with 6 mm thick top layers of anti abrasive material of M-35 grade with any colour, design & pattern, & size/ shape, as approved by GE as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness made by table vibratory method using PU mould, laid in required colour & pattern over and including 25mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed.
M&L for machine pressed precast cement concrete 1:3:6 type C-1 (using 20mm graded stone agg) as in kerb stone etc (of any section as approved) with plain faces , including chamfers,weathering,throating etc and setting in cement mortar 1:4 complete with joints to match.
M&L for moorum / red bajri filling in floors or pavings, laid in layers not exceeding 15 cm thick, spread, levelled and rammed with power roller with 10-12 tonne capacity, including watering, complete all as specified and directed.
Demolition of brick work/stone masonary built in cement mortar including all quoins, pillars, etc., removal of unserviceable materials, debris, rubbish to outside MD land, complete all as specified and as directed by Engr-in-Charge.
Cutting into old masonry to form toothings for and bonding in new brick or stone work including making good toothing and properly bonding in to old work including facing and pointing [if necessary] to match existing work, complete built in Cement Mortar 1:6 complete all as specified and directed.
M&L for squared rubble walling, Jodhpur type, regular coursed, well bonded ,bedded and solidly hearted built in cement mortar 1:6, complete all as specified and as directed.
All as per item No. 10 here-in-above, but except stone , complete all as specified and as directed.
M&L for precast cement concrete 1:2:4 type B1 (20mm graded stone aggregate) solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) setting in 1:4 cement mortar, complete, in walls all as directed.
Extra over square rubble stone walling, Jodhpur type, regular course for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing, complete all as specified and as directed.
Dismantling, Stone slab, floor, hearth or wall tiling including cement mortar bedding, and rubbish off the premises, complete all as directed.
M&L for 25 mm thick cement concrete 1:2:4, type B-1, (using 20mm graded crushed stone aggregate), finished surface even & to receive floor finishes etc complete all as specified and as directed.
Non skid ceramic coloured tiles, Joint free (premium quality) of size 6 to 7 mm thick (square/rectangular) area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed. Make : Kajaria/ Somany/ Orient as approved by GE.
All as per item No. 16.00 here-in-above, but as in skirting, Dado & other verticle surfaces including & over 10mm thick backing coat in CM 1:4 complete all as specified and as directed. Make : Kajaria/ Somany/ Orient as approved by GE.
Non skid ceramic coloured tiles, Joint free (premium quality) of size 6 to 7 mm thick (square/rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed. Make : Kajaria/ Somany/ Orient as approved by GE.
M&L for glazed colour ceramic tiles (premium quality) of size 300X450X6-7 mm, as in vertical surface such as i.e. dado/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles (Highlighter pattern), over and including 10mm thick backing coat in CM (1:4) complete all as specified and as directed. Make : Kajaria/ Somany/ Orient as approved by GE.
M&L for 18-20 mm thick machine cut kota stone slab, as in flooring, cooking platform & etc. over and including 15mm thick cement screed bed in CM 1:6 laid and jointed with grey cement clurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing ,complete all as specified and as directed by Engr-in-Charge.
M&L for 18-20 mm thick machine cut kota stone slab, as in skirting, dado & etc. over and including 15mm thick cement screed bed in CM 1:4 laid and jointed with grey cement clurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing ,complete all as specified and as directed by Engr-in-Charge.
M&L for 15 mm thick rendering in CM 1:6 finished even and smooth without extra cement on stone wall surface, complete all as specified and as directed.
M&L 18-20 mm thick machine cut Kota stone, as in shelves and other places etc., laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and polishing, complete all as specified and as directed.
M&L for 18-20 mm thick (telephone black shade) granite stone, as in cooking plateform, & similar work, machine cut, mirror polished best quality as per sample, including & over20 mm thick screeding in CM1:3 including rounding of the edges & providing suitable dia hole in the slab for the gas pipe, complete all as specified and as directed.
Taking down cement or cement lime plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc including removing rubbish to out side MD land complete all as specified and as directed.
Rendering 10 mm thick in cement mortar1:4 on stone masonry surfaces finished fair and even with out using extra cement complete all as specified and as directed.
M&L Rendering 10mm thick in CM 1:3 on concrete surfaces on ceiling / facia /RCC Chhaja etc all as directed & finished even & smooth, complete all as specified and as directed by Engr-in-Charge.
M&L Rendering 5mm thick in CM 1:3 on concrete surfaces on ceiling / facia /RCC Chhaja etc all as directed & finished even & smooth, complete all as specified and as directed by Engr-in-Charge.
Racking out joints/ pointing to squared rubble or polygonal rubble un-coursed or brought up to courses masonry built in cement mortar, coursed or un-coursed in walls not less than 12mm deep, washing the joints, removing rubbish off the premises and keeping the surface to pointed or plastered wet for two days prior to re-pointing or plastering complete all as specified & directed by Engineer-in-charge.
M&L for Keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3 all as specified.
M&L for preparing new plastered or unplastered surfaces and applying one coat wall care putty including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of oil bound distemper on walls, complete all as specified and as directed. Note:- OBD shall be in one or more colours/ shades all as approved by GE.
Complete removal of existing treatment of any description on walls and and applying two coat wall care putty including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of oil bound distempe, complete all as specified and as directed. Note:- OBD shall be in one or more colours/ shades all as approved by GE.
M&L for Preparation of newly plastered or unplastered surfaces and applying three coats of white wash on wall complete all as specified and as directed.
M&L for Preparation of newly plastered or unplastered surfaces and applying three coats of white wash on ceiling complete all as specified and as directed.
M&L for Preparation of old white washed surfaces and applying one coat of white wash on wall surfaces complete all as specified and as directed.
M&L for Preparation of old white washed surfaces and applying one coat of white wash on ceiling surfaces complete all as specified and as directed.
M&L for preparation of new plastered or un-plastered surfaces of wall and applying two coats of cement base paint of approved quality & tint, over & including one coat of chalk white, complete all as specified and as directed.
Preparation of old painted surfaces of walls and applying one coat of cement base paint complete all as specified and as directed.
Preparation of new or previously untreated wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed .
M&L preparation of new or previously untreated steel surface of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red- oxide, zinc chrome primer complete all as specified and as directed.
Taking down chowkhats or frames with shutters (without taking of shutters from the frames) area not exceeding 1.5 Sqm each complete all as specified and as directed.
Taking down chowkhats or frame with shutters (without taking of shutters from the frames) area exc 1.5 Sqm but not exceeding 4 Sqm each, complete all as directed.
S&F rolled mild steel sections like framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars barred iron doors; chowkhat, doors with MS sheet, ladders ;framed balusters walk ways railings framed work of water tanks and similar work confirming toFe-290Gde E-165 complete all as specified & directed by Engineer-in-charge
M & L for mild steel framed work as in brackets etc for cooler stands etc framed steps/stairs etc complete using MS angle iron Steel bars gusset plate etc complete all as specified & directed .
S&F mild steel frame work as in stairs ,hand rails half round or other stock section or section or core for wooden hand rail straight portion drilled and countershunk for balusters running bars for doors balusters nosing to steps including embeded in concrete and screwing etc hip ties for roof including securing bolts post and struts in fencing including securing bolts post and struts in fencing including cutting tops to shape as directed drilling holes nothing for wire etc flat iron fillet for necessary drilling bolting or riveting etc and similar work confirming to Fe 410-0 or fe 310-0, complete all as specified and as directed.
M & L for fabrication of pressed steel cupboard shutters using 1.00 mm thick MS plain sheet & with frame 1.25 MM thick bent to shape incl two coats of synthetic enamel paint on internal surfaces & two coats of hammer tone finish on external surfaces alongwith locking arrangement mortice lock handle etc, including taking down old U/s steel shutter complete all specified and directed.
S&F 35mm thick factory made second class hardwood glazed and skelton door shutters, open rebated and prepared to receive glass/gauze etc(without sash bar) edges of framing plain chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge in SSR Pt I-1991 section 8 clause 8.24 (b), including stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with SS wire staples & aluminium grill medium grade mess size 50X50mm fixed at outer edge of door incld pink primer, complete all as specified and as directed.
S&F factory made flush shutters 35 mm thick, solid core construction, with block board and plywood face panels, both faces is covered with salmica with lipping/frame to match with moisture content not less than 12% as per IS. The face panel comprising of ply wood or cross band and face veneers shall be glued by hot pressed process, complete all mortic lock and handel arremgment, complete all as specified and as directed.
S&F 30 mm thick factory made solid panel PVC door shutter (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing., complete all as specified and as directed.
S&F solid PVC door frame of size 50x47mm made out of 5mm thick PVC sheet reinforced with MS square tube, complete all as specified and as directed.
Taking down of steel window and ventilators, carefully, complete all as directed by Engr-in-Charge.
S&F factory made box type windows (steel) (BWM) with side hung shutter as shown in Drg No CEJZ/TD/20 sheet1/3 to 3/3 complete with glazing bars, dovetailed or welded, (with or without cooler opening) complete all as specified and as directed by Engr-in-Charge. Note : Both shutter (wherever applicable) will be jointed internally with flat iron of size 40 x 4mm and quoted rate deemed to include the cost component of the same.
S&F factory made box type windows (steel) (BWM) with side hung shutter as shown in Drg No CEJZ/TD/20 sheet1/3 to 3/3 complete without glazing bars, dovetailed or welded, (with or without cooler opening) complete all as specified and as directed by Engr-in-Charge. Note : Both shutter (wherever applicable) will be jointed internally with flat iron of size 40 x 4mm and quoted rate deemed to include the cost component of the same.
Factory made, box type steel ventilator with glazing bars dovetailed or welded with one shop coat of zinc chromate primer, complete all as specified and as directed.
Factory made, box type steel ventilator without glazing bars dovetailed or welded with one shop coat of zinc chromate primer, complete all as specified and as directed.
S&F of aluminium anodized,tower bolt extruded section of size 200 mm long, complete all as specified and as directed.
S&F aluminum anodised handle extruded section of size 150mm long, complete all as specified and as directed.
S&F of aluminium alloy anodised sliding door bolt with hasp and staple bolt type and fixings clips of sheet cast or extruded sections and fixings bolts and sliding bolts of extruded sections and fixed 16mm dia and 300mm long, complete all as specified and as directed.
S&F of stainless steel butt hinges 100mm size, complete all as specified and as directed.
S &F of mild steel butt hinges 100mm size, complete all as specified and as directed.
S&F 100mm size single action door spring hinge, complete all as specified and as directed.
S&F floor door stopper of aluminium alloy body and toungue anodised with hard drawn steel spring 140mm long, complete all as specified and as directed.
S&F of 4mm thick pinheaded sheet glass panes of size not exc 0.5 Sqm fixed with oil putty, complete all as specified and as directed.
S&F for 3mm thick plain glass ordinary quality & glazing, complete all as specified and as directed.
S&F in replacement GI steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.00 mm with necessary fitting on steel/ wooden surface, complete all as specified and as directed.
M&L for PCC 1:2:4 type B-1 Mix (using 20mm graded crushed stone aggregate) as in hold fast iron fixing including necessary form work, complete all as specified and as directed.
S&F flat iron for hold fast and similar work confirming to Fe-290 Gde-E-165 fixed with welding and necessary item, complete all as specified and as directed.
S&F in replacement MS with PVC coated decorative curtain rods of 25mm dia, including 8 nos PVC rings per running meter of curtain rod, fixing with bracket, knob etc., complete all as specified and directed.
S&F in replacement shelf of PTMT fixed with and including chromium plated brass screws and wooden cleats (Min weight 300 gms), complete all as specified and directed.
S&F in replacement soap dish of PTMT fixed with screws complete all as specified and directed.
S&F in replacement PTMT towel rail 450mm long fiexd to wall with chromium plated brass screws and woodn cleats Min weight 170gms approved make complete all as spcified and directed.
S&F in replacement MS chromium plated peg set of five fixing with wall, complete all as specified and as directed.
S&F in replacement stainless steel sink made of 1mm thick sheet, kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarfwall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm, complete all as specified and as directed. Make : Nirali/ Jayna/ Bluestar as approved by GE.
S&F in replacement Ivory/ superior class vitreous china squatting pan "Orissa pattern" of size 580 mm X 440 mm with integral foot rests andPVC 'P' or 'S' trap, flush pipe of 32mm dia HDPE pipe etc including provision of cement concrete bedding 1:5:10 type E2 connecting to drain pipe and flushing pipe etc., complete all as specified and as directed. Make:- Cera Cat No. COVY S3010104 (Ivory) or equivalent in Hindware / Parryware as approved by GE
S&F in replacement vitreous china ware wash hand basin, white, flat back of size 550 mm X 450 mm including 32 mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 15 mm size 2 nos PVC connection pipe 450 / 600 mm long with PTMT nuts , 32mm bore (low density polythene ) LDPE flexible waste pipe, complete all as specified and as directed. Make:- Cera Cat. No. CALBURT S2020137 or its equivalent model in Hindware / Parryware as approved by GE
Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 110mm bore, complete all as directed.
Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 75mm bore, complete all as directed.
S&F 100mm dia sand cast iron pipe (soil waste and vent) in any length with or without ears with cement joints laid in trenches or in floor, complete all as directed.
S&F 75mm dia sand cast iron pipe (soil waste and vent) in any length with or without ears with cement joints laid in trenches or in floor complete all as specified and directed
S&F 100mm dia sand cast iron pipe (soil waste and vent) in any length with or without ears with cement joints fixed on wall, complete all as specified and as directed.
S&F 75mm dia sand cast iron pipe (soil waste and vent) in any length with or without ears with cement joints fixed on wall, complete all as specified and as directed.
S&F100mm CI branch pieces single socketed 'Y' equal or unequal, complete all as specified and as directed.
S&F 75mm CI branch pieces single socketed 'Y' equal or unequal, complete all as specified and as directed.
S&F100mm CI bends any radius, complete all as specified and as directed.
S&F 75mm dia CI bend with oval acess door fixed to pipe, complete all as specified and as directed.
S&F 100mm dia CI vent cowl fixed to pipe, complete all as specified and as directed.
S&F 75mm dia CI floor trap plain grating including jointing with solvent cement 75mm dia, complete all as specified and as directed.
S & F in replacement over head shower rose 150X150mm square shape single flow ,body and face plate brass with CP ,arm 300mm long joiting to pipe complete all as specified and as directed. Make : Jaquar Cat No. OHS-1757 or equivalent in Kohler/ Cera as approved by GE
S&F in replacement Pillar cock, long neck with aerator chromium plated fancy type, suitable for 15mm bore pipe, complete all as specified and as directed. Make : Jaquar Cat No.CQT-23021 or its equivalent model in Kohler/ Cera as approved by GE
S &F in repair 25 mm dia stop valves, cast copper alloy with screw down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed of 25mm dia all as specified specified. Make : Jaquar / Kohler/ Cera as approved by GE
S&F in replacement angular stop valves cast copper alloy chromium plated (ISI marked) screwed down high pressure fancy type screwed both ends for 15mm bore of iron pipe or union, complete all as specified and as directed by Engr-in-Charge. Make : Jaquar cat No. ALI 85053 or its equivalent model in Kohler/ Cera as approved by GE.
S&F in replacement two way angular stop valves cast copper alloy chromium plated (ISI marked) screwed down high pressure fancy type screwed both ends for 15mm bore of iron pipe or union, complete all as specified and as directed by Engr-in-Charge. Make : Jaquar / Kohler/ Cera as approved by GE.
S & F CP Health faucet with 1200 mm long & 80 mm dia flexible steel tube with wall hook with Non Return Valve [back flow preventer] complete all as specified and as directed. Make: Model No.ALD-573 of JAQUAR make or equivalent model in Cera / Hindware / Johnson
Supply and fix Angle stop valve, fancy type, brass chromium plated, concealed type, screwed down, high pressure with crutch or butterfly handle, screwed both ends for 15mm bore, iron pipe or for unions all as specified and as directed Make : Jaquar cat No. FUS-29083K (exposed part) & ALD-083 (Regular body) / Kohler/ Cera as approved by GE
S&F in replacement chromium plated fancy type quarter turn 15mm bore bib cock with wall flange, complete all as specified and as directed. Make : Jaquar Cat No. OPP-15037 or equivalent in Kohler/ Cera as approved by GE
S&F in replacement 10 ltrs capacity PVC valve less(Super special colors), (ISI Marked) syphonic action type, flushing cistern, low level, with Anti Bacterial Knob, with inlet, ball valve, float and handle including brackets, flush pipe of 32 mm dia and, cistern colour shall be match WC colour, complete all as specified and as directed. Make:- Cera cat. No. B1010102 CIENA PREMIUM or its equivalent model in Parryware / Jhonson as approved by GE
Dismantling water tanks of capacity exc 500 ltrs but not exc 1000 ltrs and removing to store, complete all as specified and as directed.
S&F 1000 ltrs capacity rotational moulded polythene water storage tank three layered white colour (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I including PTMT ball valve high pressure with epoxy coated aluminium rod and high density plastic ball suitable for 20mm bore pipe weight not less than 210gms complete all as specified and as directed. Make:- Sintex / Rotex as approved by GE
S&F stainless steel plate rack of size 750mm X 600mm X 200mm of approved pattern made out of stainless steel sheet 18 gauge with round 8mm dia rods complete all as specified and directed. Make : Nirali/ Jayna/ Bluestar as approved by GE.
Taking out from position framed woodwork as in cupboards/cabinets etc with all fittings ,shutters, shelves, drawers etc in any position fixed in walls or floors & removal of the rubbish outside MD land all as directed at site for overall sizes exc 0.50 sqm but not exc 1.50 sqm & depth not exc 60cm, complete all as directed.
Providing and fixing polyvinyl chloride (PVC) sheet frame of width 150mm & 18mm thickness made out of extruded 18mm PVC sheet and joined with suitable Cement Solvent adhesive and screw.The frame shall be fixed to the wall using 75mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 3 Nos. of screws to be provided for each vertical member & minimum 2 Nos. for horizontal member etc, all as per manufracturers specifications, complete all as specified and as directed by Engr-in-Charge.
M&L for 18 mm thick solid PVC sheet UPVC Coated Celuka printed in one of two different colours( with wood grain printed pattern /ivory colour finish) as in kitchen cabinet shutters & cupboard shutter, all round body of cabinets , shelves ,drawers etc cut to required size jointed with solvent cement & steel screws etc., complete all as specified and as directed.
S & F Auto hinges, stainless steel, complete assembly complete all as specified and directed.
Extra over solid PVC sheet for fixing 18 mm width & 2-3 mm thick PVC coloured lipping of approved design & colour fixed with solvent cement or headless nails, complete all as specified and as directed.
S&F '0' degree clip type self closing hinges for cabinets fixed with cadimum coated screws, complete all as specified and as directed. Make:- Hettich
S&F 100mm size bright finished cromium plated steel handle of approved shape & design fixed with cadmium coated screws on the kitchen cabint shutters, complete all as specified and as directed.
S&F 75mm size bright finished cromium plated steel handle of approved shape & design fixed with cadmium coated screws on the kitchen cabint shutters, complete all as specified and as directed.
S&F magnetic catches for cabinets of size 50 mm complete with striking plate & magnetic stud complete all as per approved smaple. Make:- Hettich
S&F drawer runners folding type with guide channels & sliding channel with approipiate ball bearing/ rollers etc complete to obtain smooth movement of the drawers. Make:- Hettich
M&L for stainless steel tray as per trade pattern of various sizes for drawer to keep the kitchen utensil as directed by Engineer-in-charge. Make:- Hettich
M&L 50mm thick PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) platform for water tank & like other similar work, complete all as specified and as directed
Demolition of reinforced cement concrete of any description for as in staircase, landing, chajjas,roof,colums ,beam of any type /stone putty roof and similar suspended works, & etc complete all as specified and directed.
M&L of Precast reinforced cement concrete 1:2:4 type B-1 (using 20 mm stone crushed aggregate) as in manhole/drain cover including chamfers weathering set in cement motar 1:4 and joints to match with CM 1:3 and all complete all as specified and as directed.
Sand stone slabs, 5 cm thick, Jodhpur pattern/colour in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, etc not exceeding 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar 1:4 complete all as specified and as directed.
Supply only integral water proofing compound ISI Marked all as specified.
Taking up or down 25mm bore steel tubing and connections including cleaning for refixing or credited to contractor complete all as specified and as directed.
-Ditto- All as per Item No. 118 above but 20 mm dia
-Ditto- All as per Item No. 118 above but 15 mm dia
Refixing old GI water tubing of 25 mm bore, medium grade including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including testing complete all as specified and as directed.
All as per item No. 121.00 here-in-above, but size 20 mm bore
All as per item No. 121.00 here-in-above, but size 15 mm bore
S&F GI tubing medium grade, galvanized, with all fittings fixed to wall, ceilings or laid n floors, complete all as specified and as directed. (a) 25 mm dia,
-Ditto- All as per Item No. 123.00 above but 20 mm dia
-Ditto- All as per Item No. 123.00 above but 15 mm dia including cutting chases, pinning in & making good to disturbed portion to match the existing surface etc., complete all as specified and as directed.
Use and waste formwork to side & soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick [horizontal or sloping] including rough finished surfaces complete all as specified and directed.
Use and waste formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide includingrough finished surfaces complete all as specified and directed.
Use and waste of form work to sides and soffits of lintels, floor or roof beams, brackets, shelves and similar works for rough finished surfaces of concrete complete all as specified and as directed.
M & L RCC M-25, design mix, (using 20 mm graded crushed stone aggregate) as in slab supported on wall, roof slab, chijja and in shelve etc complete all as specified and directed.
M & L RCC M-25, design mix, (using 20 mm graded stone aggregat)e as in beam, roof beam, cantilevers, lintel beam, etc. complete.
S & F mild steel TMT bar 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam , slab etc hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed.
S & F mild steel TMT bar 6 to 8 mm dia cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam , slab etc hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed.
S&F TMT steel bars of 5mm to 10mm dia bars as in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed.
M&L for Roof treatment work by applying, neat cement slurry @ 3.00 kg/Sqm and screeding / bedding layer of 10 mm thick in CM 1:3 mixed with water proofing compound as per manufacturer instructions over the RCC roof slab for laying of water proofing treatment including providing the following stage as roof treatment complete all as specified and as directed : - (a) FIRST COURSE: Applying a coat of bituminous primer @ 0.4 litre / Sqm manufactured by the same agency that of APP with a density 0.87 to 0.89 Kg/litre at 25 degree celsius on prepared plastered surfaces. (b) SECOND COURSE: Applying one coat of bonding material using blown type bitumen conforming to IS-702 grade 85/25 @ 1.20 Kg/Sqm (c) THIRD COURSE : Provide a layer of APP modified polymeric membrane centre core of 100mm micron HMHDPE, outer film 20 micron each, thickness 2.00mm having weight not less than 2.25 Kg/Sqm using torch application method with minimum 10cm side lap and 15cm end lap complete . (d) FOURTH COURSE : Applying one coat of bonding material using blown type bitumen confirming to IS- 702 grade 85/25 @ 1.20 Kg/Sqm. (e) Top layer : 40 mm thick PCC 1:2:4 type B-1 using 12.5mm graded crushed stone aggregate in roof padding for maintain slop on roof finished even and smooth with using extra cement NOTE :- 1. A Information Tablet will be put up in the front side wall of the buildings where this work will be done. All building/structure shall be provided with plaque (tablet) furnishing the information as per PS clause No. 21.3, in plaster engraving in and painted as directed by GE 2.WPC shall be measured and paid separately under respective item. 3. Roof treatment work will be carried out by authorize applicator of APP manufracturer company.
E/M WORK Taking down carefully aluminium/copper point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendent, regulators, sockets, bell push, bell, light fittings etc. removing serviceable materials to store for keeping in safe custody for reuse at site or for taking credit (Credit shall be made as per Schedule of credit), removing rubbish from the site and making good all disturbed surfaces of walls, floors etc. to match to the existing surfaces, complete all as directed.
Taking down unserviceable sub main wiring with copper/aluminium conductor,PVC insulated,unsheathed cable of any size drawn through and including rigid PVC or PVC casing caping including earth wire and making good disturbed surfaces of walls,floors, etc, complete all as specified and directed.
M&L point wiring using approved colour coding as per IS code -694 with valid CML No., with multi stranded copper conductor 1.5 sq mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLSH cable 1100 Volts grade, ISI marked, in and including heavy duty non metallic PVC rigid conduit of 25mm dia with accessories surface mounted or concealed in wall/roof/floor etc, ISI marked with1.6mm thick mild steel/ prestressed steel sunken / concealed box (with earth dolly) with 3 mm thick plastic laminated sheet (ISI Marked) cover for fixing of switches, sockets and fan regulators etc, inciuding PVC insulated & unsheathed multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly suitable for One light/fan/bell point controlled by one, one way switch, complete all as specified and as directed.
All as per serial Item No.137.00 above but for one 3 pin socket outlet 5/6 Amps on the same board, complete all as specified and as directed.
All as per serial Item No.137.00 above but for one 3 pin socket outlet 5/6 Amps on the independent board, complete all as specified and as directed.
All as per serial Item No.137.00 above but for 16 Amps 3/6 pin socket point on independent board with 2.50 Sqmm PVC insulated FRLSH multi-stranded copper conductor with 2.50 Sqmm PVC insulated & FRLSH multi-stranded copper conductor as earth wire complete all as specified and directed .
S&F switch piano, flush type, single pole, one way, 5/6 Amps, 230 Volts, ISI Marked, complete all as specified and as directed.
S&F bell ding dong type AC, 230 Volts, ISI Marked, complete all as specified and as directed.
S&F sbell push, single pole, one way, 5/6 Amps, 230 Volts, ISI Marked, complete all as specified and as directed.
S&F switch piano, flush type, single pole, one way, 15/16 Amps, 230 Volts,ISI Marked, complete all as specified and as directed.
S&F socket outlet, flush type, single pole, 2 in 1, 3 Pin, 5/6 Amps, 230 Volts,ISI Marked, complete all as specified and as directed.
S&F socket outlet, flush type, single pole, 2 in 1, 6 Pin, 5/15 Amps, 230 Volts,ISI Marked, complete all as specified and as directed.
S&F lamp holder insulated body polycarbonate type with back plate, complete all as specified and as directed by Engr-in-Charge.
M&L ceiling rose, 3 phase / PVC / Polycarbonate, isolated body, ISI Marked, complete all as specified and as directed. Make : Legrand/ ABB/ Schneider
S&F Electronic fan regulator, 120W, modular type, 2 module and connecting electrically, ISI Marked, complete all as specified and as directed by Engr-in-Charge.
S&F LED lamp 9W complete all as specified and directed by the Engineer-in-Charge.
Taking down and refixing / Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan including filling cavities with filler, one coat after cleaning all dust etc., complete all as directed.
S&F in replacement of Prewired distribution board (sheet metal enclosures) SPN 8 way with suitable rated 200 Amps bus bar for Double door DB's of apporved gauge conforming to IS relevant, IP-43 protection, 240 volt, including taking down old u/s material, complete all as specified and directed by Engr-in-charge. Note -Rate are deemed to be included for flashing in wall concealed complete, making good and matching existing surface Make :-Legrand/ ABB / Schneider.
S&F in replacement of Prewired distribution board (sheet metal enclosures) TPN 4 way with suitable rated 200 Amps bus bar for Double door DB's of apporved gauge conforming to IS relevant, IP-43 protection, 240 volt, including taking down old u/s material, complete all as specified and directed by Engr-in-charge. Note -Rate are deemed to be included for flashing in wall concealed complete, making good and matching existing surface Make :-Legrand/ ABB / Schneider.
S&F MCB single pole 240 volts rating from 6 to 32 Amps, with rupturing capacity 10 KA, 'C' curve type, (ISI marked), with over load and short circuit protection, as in replacement, including taking down old u/s materialcomplete all as specified and as directed by Engg.-in-charge. Make : Legrand/ ABB/ Schneider
S&F MCB SPN 240 volts rating from 40 Amps, with rupturing capacity 10 KA, 'C' curve type, (ISI marked), with over load and short circuit protection, as in replacement, including taking down old u/s materialcomplete all as specified and as directed by Engg.-in-charge. Make : Legrand/ ABB/ Schneider
S&F MCB TPN 415 volts rating from 63 Amps, with rupturing capacity 10 KA, 'C' curve type, (ISI marked), with over load and short circuit protection, as in replacement, including taking down old u/s materialcomplete all as specified and as directed by Engg.-in-charge. Make : Legrand/ ABB/ Schneider
S&F in replacement of LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, including taking down old u/s material complete all as specified and as directed. Make : Bajaj Cat No. BCLSB 20 WH or Equivalent in Philips/ Havells as approved by GE.
S&F Environmental friendly, ultra modern, energy saving, surface mounted, decorative round plastic bulk head LED luminaire comprising of high brightness LEDs, IP54 protection with lamp 10W 6000K with all accessories including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed. Make : Philips/ Bajaj/ Havells
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. Make : Bajaj /Philips / Havells
S&F connecting, and commissioning of street light fitting 35 watt LED , IP-65 protection, single piece pressure dia cast aluminium alloy housing high immpact 4 mm thick heat resistant toughned clear glass cover for lamp and matrix of LEDs in built electronic driver upto 4 KV surge protection device and setting& input power 35 W system lumens 85/W operating voltage 160-260 V contror gear compartment with high voltage, Prewired including 1.20 mtr long 32mm bore light grade GI pipe mounting bracket made to shape with and including MS clamp of FI 40 mmx6mm with bolts , nuts & washers and conductor to fitting with 3 core 1.5 sqmm PVC insulated cable complete all as specified Make : Philips/ Bajaj/ Havells
S&F sub main wiring with two runs of PVC insulated but unsheathed multi stranded copper conductor FRLSH cable 1100 volt grade, as per IS code 694 with valid CML No. & ISI Marked, of size 6.00 Sqmm and one run of 4.00 Sqmm single core PVC insulated but unsheathed multi stranded copper conductor FRLSHH cable (Phase-Red, Neutral-Black, Earth-Green) 1100 volt grade as earth lead drawn through in and including non metallic PVC conduit of size 25 mm dia (external) with wall thickness not less than 1.8 mm, (ISI marked) concealed in wall including accessories like bends, tees junction boxes, etc fixed in wall or ceiling etc., complete all as specified and as directed by Engr-in-Charge. NOTE: Two runs of 6.00 sqmm cable with one run of 4.00 sqmm cable as earth wire and PVC conduit shall be measured & paid for as one length.
M&L for disconnection and taking down & refixing electric meter including connection, complete all as specified and as directed by Engr-in-Charge.
S&F exhaust fan, heavy duty steel body, AC single phase 300 mm sweep, 900 RPM complete with louvers including cutting / making holes in wall fixing/grouting of frame & connecting with & including 3 core PVC insulated copper conductor flexible cable of size 23/0.0076 (or eq. Size in mm) from ceiling rose to fan, complete all as specified and as directed by Engg.-in-charge. Make : Havells/ Bajaj/ USHA
M&L in replacement earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised iron earth lead wire of size 4mm dia by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe 40 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion, complete all as specified and as directed by Engr-in-Charge. Note:- (i) Item includes the cost of 7.5 metre GI pipe for protection of earth lead. (ii) Item includes the cost of 7.5 metre GI earth lead.
Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor, stranded conductor, served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 4 Core 25 Sqmm nominal cross section in service connections, as in replacement, including taking down old u/s cable, complete all as specified and as directed.
NOTE:- (i)- Quantities are clubbed in BOQ for different Jobs. For which ref. Annexure-I on Sl. page. No. 43 (R), 44 (R) & 45 of tender document. (ii)- The contract sum shall be arrived at after duducting amount of schedule of "Credit" from the Total quoted amount
M/S KAUTILYA GARG
Nikhat nirman
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .