Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.4 LAccepted-AOC H NO 107 A RAJENDRA NAGAR DIGARI KALAN JODHPUR 342015 | JODHPUR | JODHPUR | RAJASTHAN | 342015 | L1 | Accepted-AOC Accepting being L1 | |
| 2 | L2₹34.8 L+₹5.2 L (17.4%)Rejected-Finance OPP INCOME TAX OFFICE PAOTA C ROAD JODHPUR 342001 RAJ | JODHPUR | JODHPUR | RAJASTHAN | 342001 | L2 | Rejected-Finance NOT LOWEST | |
| 3 | L3₹38.1 L+₹8.4 L (28.3%)Rejected-Finance C 488 SC PLOT NO 10 EKTA NAGAR NEAR ANANT LEWIS PUBLIC SCHOOL BANAR ROAD NANDRI PO SARAN NAGAR JODHPUR 342015 RAJASTHAN | JODHPUR | JODHPUR | RAJASTHAN | 342015 | L3 | Rejected-Finance NOT LOWEST |
Tender Value
Refer Docs
EMD Value
₹90,000
Closing Date
27 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE ARMY NO. 1 JODHPUR
GE ARMY NO. 1 MULTAN LINES ARMY AREA JODHPUR
SPL REPAIR TO BLDG NO P-14 OF COY ASC IN ARMY AREA JODHPUR AND PROVN OF KITCHEN ACCESSORIES FOR RENOVATION OF KITCHEN AND UPGRADATION OF CENTRAL GENTS TOILETS OF KONARK OFFR MESS (BLDG NO P-1607) UNDER GE (A) NO.1 JODHPUR
2023_MES_624903_1
GE/JODH (A) NO 1- OF 2023-24 (9204/E8)
Open Tender
Civil Works
Item Rate
180 days
JODHPUR
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE ARMY NO. 1
₹90,000
Yes
24 Jan 2024
25 Oct 2023
5 Dec 2023
25 Oct 2023
27 Nov 2023
13 Nov 2023
Amount
Demolition of unreinforced cement concrete in ground floors and pavings not exceeding 15cm thickness ( below or above ground level) of any description and removing rubbish to out side MD land complete all as specified and as directed.
Demolition of reinforced cement concrete (including cutting of reinforcement if any) in any description for roof, beams, columns, slabs, downward fascia, chajja, parapet wall & others and any position not otherwise specifically provided for and removing rubbish to out side MD land complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises
M&L for 25 mm thick cement concrete 1:2:4, type B-0 (using 12.50 mm graded crushed stone aggregate), as in base course, to receive floor finishes, complete all as specified & directed.
M&L Machine cut kota stone slab 20 to 25mm thick(size not less than 580 mm X 580 mm), as in floor, treads of steps (single piece for steps) or similar works laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete over and including 20mm thick screed bed in CM 1:6, complete all as specified and as directed.
M&L Machine cut kota stone slab 20 to 25mm thick, as in riser of steps (single piece for steps), skirting, dado and pillar laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete over and including 10 mm thick backing coat in CM 1:4, complete all as specified and as directed.
M&L for glazed colour ceramic tiles (premium quality) of size 300X450X6-7 mm, as in vertical surface such as i.e. dado/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over & including M&L 10mm thick backing coat in CM (1:3), (including Highlighter pattern), complete all as specified and directed.
M&L for joint free non skid ceramic coloured tiles (premium quality) of size 6 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm (size & shape, shade and pattern as approved by GE), as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including M&L 15mm thick screed bed or bedding layer in CM 1:6, complete all as specified and directed.
M&L for vitrified tiles of dark shade, 10mm thick (minimum) (square/ rectangular) polished area of each tiles equal to or not exceeding 0.36 Sqm (size & shape, shade and pattern as approved by GE), as in flooring, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and including 15 mm thick skrid bed in CM 1:6, complete all as specified and as directed.
All as per Sl. Item No. 9.00 here-in-above, but as in dado/skirting over and including 10 mm thick skrid bed in CM 1:4
Taking down cement plaster any description on brick or stone walls, RCC surfaces, etc including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off the premises and leaving the work clear of any plastering complete all as specified and as directed.
M&L rendering 15mm thick in cement mortar 1:6 internal on stone masonry surfaces , finished even and smooth without using extra cement complete all as specified and as directed.
M&L rendering 10mm thick in cement mortar 1:4 on concrete surfaces of ceiling /chajja/facia, finished even and smooth without using extra cement, complete all as specified and directed.
Racking out joints/ pointing to squared rubble or polygonal rubble un-coursed or brought up to courses masonry built in cement mortar or cement lime mortar, coursed or un-coursed in walls not less than 12mm deep, washing the joints, removing rubbish off the premises and keeping the surface to pointed or plastered wet for two days prior to re-pointing or plastering complete all as specified & directed.
M&L keyed pointing in cement mortar (1:3) to squared rubble masonry regular coursed or un coursed complete all as specified & directed.
M&L Preparing new plastered or unplastered wall surfaces and applying with 1.5-2 mm thick wall care putty including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of oil bound distemper over & including M&L one coat of primer on walls complete all as specified and as directed.
M&L for Preparation of new plastered or unplastered surfaces of wall and applying three coats of white wash on wall surfaces complete all as specified and as directed.
M&L for Preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash on ceiling surfaces complete all as specified and as directed.
M&L for complete removal of existing treatment of any description on walls and applying with wall care putty including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of oil bound distemper over & including M&L single coat of primer on walls complete all as specified and as directed.
M&L for preparation of old decorated ceiling surfaces plastered or unplastered, by brooming down or steel wire brushing, scrapping down moulds, moss and efflorescent salts and trading oil & greasy spots, including cornices etc and applying one coat of white wash on ceiling, complete all as specified and directed.
M&L Preparation of new plastered or un-plastered surfaces of walls and applying two coats of cement base paint over & including M&L single coat of white wash complete all as specified and as directed.
M&L for preparation of old decorated wall surfaces plastered or unplastered, by brooming down or steel wire brushing, scrapping down moulds, moss and efflorescent salts and trading oil & greasy spots, including cornices etc and applying one coat of base paint on wall complete all as specified and directed.
Taking down chowkhats or frame with shutters (without taking of shutters from the frames) area not exc 1.5 Sqm each, complete all as directed.
Taking down chowkhats or frame with shutters (without taking of shutters from the frames) area exc 1.5 Sqm but not exceeding 4 Sqm each, complete all as directed.
M&L for plain cement concrete 1:2:4 type B-1 by using 20 mm graded stone aggregate as in bed block for fixing of hold fast complete all as specified and as directed.
Taking down steel windows and ventilators ( glazed / fly proof) of any description complete all as specified and as directed.
M&L factory made box type steel window side hung shutter, with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and as shown in Drg No CEJZ/TD/20 sheet1/3 to 3/3 complete with glazing bars & with or without cooler opening, dovetailed or welded and with one shop coat of zinc chromate primer (with or without cooler opening), complete all as specified and directed. Note:- (i)-:Both shutter (wherever applicable) will be jointed internally with flat iron of size 40 x 4mm and quoted rate deemed to include the cost component of the same. (ii)-Glass panes, guard bar & wire cloth shall be measured and paid seperately.
All as per item No. 27.00 here-in-above, but without glazing bar
S&F of Box type steel ventilator with top hung shutter including hinges with steel handle, and steel peg stay, complete with glazing bars, all as specified. Note:- (i)-:-Glass panes, guard bar & wire cloth shall be measured and paid seperately.
All as per item No. 29.00 here-in-above, but without glazing bar
M&L for mild steel work as in chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165, complete all as specified and as directed.
S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18 mm complete all as specified and directed.
S&F 100mm size butt hinges stainless steel, with stainless steel hinge pin, anodised type B-21 complete all as specified and as directed.
S&F 100mm size butt hinges, medium weight, cold rolled mild steel, complete all as specified and as directed.
S&F 200mm long, mild steel, barrel tower bolts, stove enameled black with bright bolt complete all as specified and as directed.
S&F 150 mm long, mild steel, pressed handles, oval type, stove enameled black complete all as specified and as directed.
S&F 300mm long mild steel sliding door bolts plate type, stove enameled black, with bright bolt not less than 12mm dia and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed.
S&F for 150mm size aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.
S&F 150mm size double action door spring hinge, brass, with phosphor bronze wire spring, bright polished complete all as specified and directed.
S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engineer-in-charge.
Hacking out old broken glass [any thickness, size, quality or description] from metal frames including punching or drilling out old glazing pins / spring clips complete all as specified and as directed.
S&F for sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq.m in each pane complete all as specified and as directed.
S&F of 4 mm thick pinheaded figured glass panes of size not. exceeding 0.5 Sqm fixed with oil putty complete all as specified and directed.
M&L preparation of steel surfaces of any description otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over & including M&L single coat of red oxide zinc chrome primer complete all as specified & directed
M&L for Preparation of old painted steel surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M & L for preparing new or previously untreated wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over & including M&L single coat of pink primer complete all as specified and as directed.
M&L for Preparation of old painted wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed .
S&F in replacement decorative type curtain rod stainless steel finish of pipe 22 to 25mm dia with best quality knob metal with double fitting type including stainless steel brackets fixed to walls complete with two nos decorative stainless steel knobs at each end, complete all as specified and as directed.
M&L 5 cm thick sand stone slabs in sunshades, chajjas, shelves, cills, landings cover stones templates etc n exc 2m in length punched dressed on face and along exposed edges self faced on other side and set and pointed in cement mortar 1:4, complete all as specified and as directed.
M&L 40mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in floors & fixing of glass dividing strips & finishing the surface even & smooth with using extra cement complete all as specified & directed. Note:- Glass dividing strip shall be measured and paid seperately.
M&L for laying 40-50 mm thick Machine cut sand stone slabs as in Plinth protections laid over 20 mm thick cement sand screed in CM1:4 over and including M&L 50 mm thick PCC (1:3:6) type C-1 using 20 mm graded stone aggregate laid in alternative bays as in plinth protection including finishing the surface even & fair & filling the joints with mastic filling i.e one part of bitumen 85/25 and 3 parts of sand by weight complete all as specified & directed
Complete removal of existing water proofing treatment of any description including bedding up to the true surface of original concrete, in RCC roof slab / stone patty and roughening the old surfaces by picking, sweeping clean and washing down with water to remove dust etc including removing rubbish to out side MD land and provide plastring 10 mm thick in CM (1:4) finished even & smooth over the RCC roof slab / stone patty for laying of water proofing treatment using water proofing compound (WPC) as per manufacturer instructionand including providing the following as roof treatment complete all as specified and as directed : - (a) FIRST COURSE: Applying a coat of bituminous primer @ 0.4 litre / Sqm manufactured by the same agency that of APP with a density 0.87 to 0.89 Kg/litre at 25 degree celsius on prepared plastred surfaces. (b) SECOND COURSE: Applying one coat of bonding material using blown type bitumen conforming to IS-702 grade 85/25 @ 1.20 Kg/Sqm (c) THIRD COURSE : Provide a layer of APP modified polymeric membrane centre core of 100mm micron HMHDPE, outer film 20 micron each, thickness 3.00mm having weight not less than 3.00 Kg/Sqm using butane torch with minimum 10cm side lap and 15cm end lap complete (d) FOURTH COURSE : Applying one coat of bonding material using blown type bitumen confirming to IS- 702 grade 85/25 @ 1.20 Kg/Sqm. (e) FIFTH COURSE : M&L 40mm thick PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate in roof padding , the surface of concrete is to be finished even and fair with out using extra cement NOTE :- WPC shall be measured and paid separately under respective
Supply only integral water proofing compound (ISI marked), complete all as specified and directed.
M&L plain cement concrete, 1:2:4 type B1 using 20mm graded stone aggregate mixed with water proofing compound, as in levelling courses of roof / chajja / kerbs, rounded or chamfered on edges including necessary form work complete all as specified and directed.
Demolition of stone / boulder masonry walling, built in cement mortar including all quoins, arches, pillars etc and removal unserviceable materials, debris, rubbish to out side MD land complete all as specified and directed.
M&L precast cement concrete block masonry using PCC 1:2:4, type B-1 solid blocks, 10 cm in width and setting in cement mortar 1:4, straight or curved on plan exceeding 6 m mean radius complete all as specified and directed.
M&L for 75 mm thick, PCC 1:4:8 type D2 by using 40mm graded crushed stone aggregate as in sub base of floor complete all as specified and as directed.
M&L precast cement concrete (1:2:4) type B-1using 20mm graded crushed stone aggregate as in kerb stone or mud steps, coping, rounded or chamfered on edge, fixing of holdfast etc complete all as specified & directed by Engineer-in-charge.
Supply and laying machine pressed / factory made chamfered edge cement concrete rubberised interlocking paver block, 60mm thick with 6 mm thick top layers of anti abrasive material of M-35 grade with any colour, design & pattern, & size/ shape, as approved by GE as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness made by table vibratory method using PU mould, laid in required colour & pattern over and including M&L 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed.
Taking down carefully cement conc /spalled out concrete from RCC roof projections, ceiling ,sunsheds, beams, etc upto cover depth by chipping out lightly including necessary scafolding etc, complete all as directed.
S&F GI chicken wire mesh of 0.71 mm dia wire & 12 mm mesh size fixed with nails & screws around RCC chajjas/fascias, wall, ceiling etc., complete all as specified and as directed.
M&L preparation of plastered surfaces of walls & writing letters or figures with (Block roman italic or Indian) exc 30cm high of suitable width as required at site with two coats of flourescent paint complete all as specified and directed by Engineer-in-Charge.
M & L Pressed steel frames of size 105X60mm of 1.25mm thick for doors with one or more rebates including necessary fixing lugs. hinges, lock strike plate,etc., complete all as specified and as directed.
M & L Pressed steel frames of size 165X60mm of 1.25mm thick for doors with one or more rebates including necessary fixing lugs. hinges, lock strike plate,etc., complete all as specified and as directed.
M&L factory Made flush shutters, 35 mm thick solid core with block board core construction and plywood face panels, one face is covered with decorative face veneer with lipping/frame to match and other commercial type, as per IS 2202(part-I, 1999) . The stiles & rails shall be with out any joint and made with non- coniferous timber hard wood (Hillock/ Mirantee/ Bosum/ Benteak) with moisture content not less than 12% as per IS. The face panel comprising of ply wood or cross band and face veneers shall be glued by hot pressed process. The over all finished thickness of face panel shall not be less than 40mm while the thickness face veneer shall not be less than 0.6 mm complete all as specified and directed.
M&L 35mm thick factory made 2nd class HW glazed and skelton shutter and open rebated and prepared to receive glass, gauge etc (without sash bars), edges or framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR Part-I Section 8 Clause 8.24 (a) complete all as specified and as directed.
S&F 35 mm thick second class hard wood factory made plain, framed, panelled shutters, with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and Style as per IS:1003 (Part-1), kiln seasoned and chemically pressure treated all as specified & directed by Engineer-in-charge.
S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.
S&F for 200mm size aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.
S&F 300 mm length aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.
S&F 150 mm floor door stopper of aluminium alloy body and tongue, anodised ,with hard drawn steel spring ,fixed in floor, complete all as specified and directed.
S&F 150 mm long double action spring hinges, mild steel with steel wire spring, stove enameled, black complete all as specified & directed by Engineer-in-charge.
M&L for mild steel frame work in trusses purlins, posts etc complete using MS angle iron, MS Hollow Square or rectangular sections,flat irons etc complete incl necessary welding cutting to shape & hoisted & fixed in position complete all as directed & specified .
M&L for mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165
M&L for joint free non skid ceramic coloured tiles (premium quality) of size 6 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm (size & shape, shade and pattern as approved by GE), as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including M&L 15mm thick screed bed or bedding layer in CM 1:6, complete all as specified and directed.
M&L for Granite slab 18 to 20mm thick machine cut, factory polished, Jet Black colour, as in WHB plateform and cooking plateform bedded and jointed with grey cement slurry and pointed with white cement (1:2) with admixture of pigment to match the shade of granite stone over and including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4, complete all as specified and directed.
S&F in replacement bib cock with wall flange, chromium plated brass (BRAND-I), fancy type 15mm dia complete all as specified and as directed.
All as per item No. 77.00 here-in-above, but angular stop cock
S & F in repairs pillar tap, 15 mm bore, chromium plated brass (BRAND-I), fancy type with capstan head, screwed down high pressure with or with out lettered "Hot" or "Cold" with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and as directed.
S & F in repairs chromium plated brass (BRAND-I), fancy type, health faucet with 1m long flexible tube with wall hook complete all as specified and directed.
All as per item No. 77.00 here-in-above, but two way angle/bib cock
S & F in repairs vitreous china ware table top wash hand basin, Ivory (brand-I), flat back of size 575 mm X 430 mm including 32 mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible waste pipe,PVC connection15mm size with PTMT nuts of length 600mm long, complete all as specified and as directed.
S&F in repairs vitreous ware wash down water closet [Pedestal Pattern], Ivory (brand-I), [ETWC] including plastic water closet seat back soft closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and 'P' or 'S' trap connecting to drain pipe and flushing pipe etc., complete all as specified and as directed.
S & F vitreous china urinal with sensor, half stall type, Ivory (brand-I), complete including providing and fixing plugs, bedding urinal against wall in cement mortar [1:2], securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, including 32mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, 32mm bore PVC flexible waste pipe, grating and union for discharge pipe, PVC connection15mm size with PTMT nuts of length 600mm long, Urinal spCP screws, etc complete all as specified and as directed.
S&F stainless steel bottle trap suitable for table top wash hand basin, complete all as specified and as directed.
S&F in repair corner sheet glass of 6mm thick, 300mm size,as in shelf , fancy type, CP triangular farming in shape and one side circular complete all as specified and directed.
S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D Type, 600 mm long between flanges including brackets complete all as specified and as directed.
S&F CP stainless steel round towel ring (Brand-I) FANCY type, complete all as specified and as directed.
S&F in repairs 12 mm thick toughened glass as door/window or partition complete including etching work/solar control film as directed all necessary stainless steel 304 grade fittings, arrangement like hinges, clips, handle etc., complete all as specified & as directed.
M&L for fabrication of powder coated (powder coating min thickness 50 micron) aluminium frame work as in frames for aluminium windows with or without rebate or for sliding windows(two track/three track ), ventilators etc with louvers having suitable mechanism for tilting , U shaped fillets for securing Jallies etc & the likes complete all as per sample kept in GE Office & fixed in position complete all as specified and directed. Note : Glass panes, in louvers, GRILL & stainless steel wire cloth shall be measured & paid for seperately.
M&L for 18 mm thick solid PVC sheet UPVC Coated Pre-laminated (one side decorative & other side balancing lamination sheet) density 600 kg/m3, in one of two different colours (with wood grain printed pattern /ivory colour finish) as in kitchen cabinet shutters ,all round body of cabinets, shelves ,drawers etc cut to required size jointed with solvent cement & steel screws etc., complete all as specified and directed.
S&F '0' degree clip type self closing hinges for cabinets fixed with cadimum coated screws, complete all as specified and as directed.
S&F 100mm size bright finished chromium plated steel handle of approved shape & design fixed with cadmium coated screws on the kitchen cabinet shutters, complete all as specified and as directed.
S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or floor of suitable size complete all as specified and as directed .
S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or floor of suitable size complete all as specified and as directed .
S&F 110 mm bore (SWR) PVC bends any radius with access door complete all as specified and as directed.
S&F 75 mm bore (SWR) PVC bends any radius with access door complete all as specified and as directed.
S & F in repairs 75mm bore PVC floor trap with CP mild steel grating (with or without hole) including jointing to waste pipe, fixed in cement concrete type B1, 1:2:4 complete all as specified and as directed.
S&F stainless steel three burner cooking range of size 72x24x34-40 inches : LPG, heavy duty, pilot with deep clean tray & Nylon bullet height adjustable feet all as per sample approved by Engr-in-charge
S&F stainless steel chapati puffer cooking range of size 48x24x34 inches : LPG heavy duty, pilot MS plate 12 mm with deep clean tray & Nylon bullet height adjustable feet all as per sample approved by Engr-in-charge
S&F stainless steel four burner continental range of size30 x 30 x 34-40 inches : : LPG heavy duty, pilot MS Plate 12 mm with deep clean tray & Nylon bullet heigh adjustale feet all as per sample approved by Engr-in-charge
S&F stainless steel Working table with undershelf 36 x 24 x 34-40 inches 1 with nylon bullet height adjustable feet all as per sample approved by Engr-in-charge
S&F stainless steel Sink with table of size 48x30x34-40 mm : Sink size 18x24x9 inches with sink coupling drain pipe & Nylon bullet height Adjustable feet all as per sample approved by Engr-in-charge
S&F stainless steel chopping tables with undershelf of size 60 x 30 x 34 inches undershelf 2 with nylon bullet height adjustable feet all as per sample approved by Engr-in-charge
S&F stainless steel wall sheet on cooking range of size 246 x 30 inches with installation , necessary supports & framings all as per sample approved by Engr-in-charge
S&F stainless steel wall shelf of size 48 x 12 inches all as per sample approved by Engr-in-charge
S&Fstainless steel wall shelf of size 36 x 12 inches all as per sample approved by Engr-in-charge
S&F steel gas pipe line of dia 10-15 mm for smart kitchen length as per ground all as per sample approved by Engr-in-charge
Taking down carefully alluminium / copper point wiring complete for light, fan, socket or power point etc with fittings fixtures such as ceiling rose, holders, electric fittings, switchs, sockets, aluminium conductor cable with and incl wooden batten or FR PVC conduit and its accessories such as wooden gutties, rawl plugs, GI screws, aluminium clips, nails etc complete and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing, OBD etc as required, complete all as specified and directed.
Taking down carefully UNSV main switch and DB's including MCBs of any size make, type and capacity and depositing at site as directed.
Taking down carefully UNSV submain wiring of any size and all as directed.
M & L for (concealed) point wiring complete with multistranded copper conductor 1.5 Sqmm PVC insulated unsheathed single core FRLSH cable 1100 volt grade, confirming IS 694 & colour code in conduit system of wiring, drawn through in and including non-metalic PVC concealed (including Cutting Chases and make good the distrubed surfaces ) conduit of size 20 mm or med grade as required as site, totally concealed in walls / and surface on floors / ceiling or fixed on surface of walls / columns / beam / tie beam etc by means of saddles and clips etc incl all conduit accessories / fittings / junction boxes / inspection covers etc of heavy grade, ISI marked and sunk terminal boxes of CI or 16 SWG pressed steel housing, totally concealed in walls with 3mm thick industrial laminated sheet top cover, fixed flush with wall surface by means of brass screws and sunk / cup washers, for mounting of switches, sockets fan regulators etc incl 1.5 Sqmm FRLSH PVC insulated, unsheathed flexible multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end, all as specified, directed and shown on drgs for The rates of chase cutting on wall done concealed conduit and steel terminal boxes & Making good disturbed surface are included in the unit rates, suitable for One light / fan point controlled by one, one way switch all as specified and directed by Engr-in-Charge.
All as per serial Item No. 113.00 above but for one 3 pin socket outlet 5/6 Amps on the independent board, complete all as specified and directed.
All as per serial Item No. 113.00 above but for one 3 pin socket outlet 5/6 Amps on the same board, complete all as specified and directed.
All as per serial Item No.113.00 above but with 2.50 Sq mm single core multistanded copper conductor cable for 3 pin 16 Amp socket outlet on independent board .omplete all as specified and directed .
All as per serial Item No.113.00 above but with 4.00 Sq mm single core multistanded copper conductor cable for 3 pin 16 Amp socket outlet on independent board .omplete all as specified and directed .
S&F Switch piano type, single pole, one way, 6 amps, 230 volts, complete all as specified and directed.
S&F Socket, two-in-one, 5 pin, 5 Amp, universal type, 230 volts, shutter provide complete all as specified and directed.
S&F Switch piano type, single pole, one way, 16 amps, 230 volts, complete all as specified and directed.
S&F Socket, 6 pin, 6/16 Amp, multipurpose shutter type, shutter provided 230 volts, complete all as specified and directed.
S&F Lamp holder, metal cased, bakelite body, 230 volts, complete all as specified and directed.
S&F LED lamp 9W complete all as specified and directed by the Engineer-in-Charge.
S&F Ceiling rose, two to three terminals, bakelite body, 230 volts, complete all as specified and directed.
Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including AC decorative box type with driver, holder including,copper conductor cable of suitable size from ceiling rose complete complete, 4 ft long all as specified and directed.
S&F bldg security LED Light Luminaire of 35 Watts having IP 65 protection fiting made out of pressure die cast Aluminium housing, operating Voltage 140-270 Volts with in built surge protectore, toughened glass with and including GI pipe 40 mm bracket of 1.5 m in length including drilling holes, nuts & bolts 2 coats of red oxide primer on GI pipe and fixing with wall security light on building wall connecting cable complete all as directed.
Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.
S&F in replacement LED focus/spot light fitting 8/ 10 watt, 360 degree rotation, decorative ultra slim type, with inegral driver, complete with all accessories and making necessary electric connection from ceiling rose to fitting terminal, complete all as specified and directed.
Taking down and refixing / Hanging only ceiling fan after repairing/rewinding and connecting up including provision of cable from ceiling rose or connector to fan, complere all as specified and directed
S&F MCB, B Curve type, 10 kA, 40 TO 63Amp, 240 volts, SPN with over load and short circuit protection, complete all as directed.
S&F MCB, B Curve type, 10 kA, 6 to 32 Amp, 240 volts, Single Pole with over load and short circuit protection, complete all as directed.
Supply and fixing as MCB DB TPN (double door) 4 Ways, 415 Volts including 200 Amps rated bus bar neutral link, IP-43 Protection, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall incl dismantling of old UNSV DB all as specified and directed by the Engr-in-Charge.
Supply and fixing as MCB DB SPN (double door) 8 Ways, 240 Volts including 200 Amps rated bus bar neutral link, IP-43 Protection, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall incl dismantling of old UNSV DB all as specified and directed by the Engr-in-Charge.
S & F in replacement ceiling fan 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE 5 star rating, with Squirrel cage induction motor, suitable for single Phase 230 volts and connected with twin core twisted flexible copper conductor cable from ceiling rose to fitting complete all as specified and as directed. .
Supply, fixing, testing and commissioning miniature circuit breaker (MCB) TPN/FP 40 to 100 AMP, 415V 10KA 'C' curve and current carrying capacity in the DB complete with connection, complete all as specified and directed.
M&L for sub main wiring with 2 run of 6 Sqmm FRLSH, PVC insulated, unsheathed and stranded copper conductor cable with and incl 6 Sqmm (nominal area) FRLSH, PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB, drawn in to separate concealed medium grade, ISI marked, non metallic PVC conduit 15 mm dia size incl all conduit accessories & fittings / junction boxes / inspection covers etc, with and incl cutting chasing and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as directed. Note:- Two run of 6 Sq.mm. and one run of 6 Sq.mm (earth wire) cable incuding one run of conduit pipe will be measured as one length including making good the disturbed surfaces
M&L for Earthing complete with galvanised steel earth plate electrode 60 x60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in elevtrical plate no. 3 connected to Earthing test point all as specified or indicated including testing on completion Note : (i) Rates are deemed to be included for necessry earth work ,PCC pit , RCC cover etc complete. (ii) Earth lead shall be up to 7.5 Mtr and rates are deemed to be included for GI pipe 15mm Light grade upto 7.5 mtrs for protection of earth wire 4.0 mm dia, complete all as specified and as directed.
Supply, laying, jointing, testing and commissioning 1100 volt grade heavy duty XLPE insulated LT under ground cable, sheathed, as per IS- 7098 (Part I) 1988, galvanized steel strip armoured heavy duty multi stranded aluminum conductor laid in trenches / passed through pipe/duct road crossing, fixed on poles/ wall with clamps made out of mild steel flat iron including fixing accessories like brass cable glands double compression type, lugs, nuts, bolts, washers etc of size 3.5 core 25 sqmm, complete all as specified and directed Note: - (i) Excavation and earthwork, sand cushioning, PCC cable cover, shall be measured and paid separately in relevant item here in after .
Excavation in trenches not exceeding 1.5m wide but not exceeding 1.5m in deep for foundation etc and not exceeding 1.50m deep for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in any type of soil complete all as specified and as directed.
Returning filling in including spreading ,levelling,watering and well ramming in layers not exc 25cm in excavated soil complete all as specified and as directed.
Removing excavated materials to a distance not exceeding 50m depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed .
Supplying and laying un-reinforced precast concrete cable cover, class LV, type 1, flat, size 300x180mm x40 mm, complete all as specified and as directed.
M&L for dry clean fine river sand as in sand cushioning to underground cable including punning down of sand layer, complete all as specified and as directed. Note :- Punned thickness shall only be measured and paid.
M&L for galvanised steel tubing, medium grade, for protection of cable, laid in trenches/road crossing/floor or fixed to pole/wall with all fittings, of size 40 mm bore, complete all as specified and as directed.
Supply and Commissioning of Wet Grinder, of capacity 7 Litres, single phase 230 Volts 1.5 HP with electric connection complete as per sample all as specified and directed by Engr-in-charge.
Supply and Commissioning of Deep Fat Frver, of capacity 6 Litres, single phase 230 Volts with electric connection complete as per sample all as specified and directed by Engr-in-charge.
Supply and Commissioning of Stainless Steel 304 Sandwich Griller Making Machine of size 22.9 x 15.2 x 22.9 cm , of , single phase AC , voltage 230 Volts, 2.5 kilowatts complete as per sample all as specified and directed by Engr-in-charge.
Supply and Commissioning of Dough Kneader of size 15 Kg, of 1 HP Single Phase AC Supply, voltage 230 Volts complete as per sample all as specified and directed by Engr-in-charge.
Supply and fixing of Eahaust Hood with Filtres, Lights & Fresh Air Vent for Three Burner Rangge (size 84x48x21 inch) complete as per sample all as specified and directed by Engr-in-charge.
Supply install and fixing of Eahaust Hood with Filtres, Lights & Fresh Air Vent for Chapati Range (size 60x48x21 inch) and of standard make complete as per sample all as specified and directed by Engr-in-charge.
Supply and install fixing of Eahaust Hood with Filtres, Lights & Fresh Air Vent for Chapati Range (size 42x48x21 inch) complete as per sample all as specified and directed by Engr-in-charge.
Supply, install and fix heavy duty exhaust fan, steel body AC single Phase. 230V of size 450 mm sweep with, blades, and frame and louvers with cutting chases on wall and grounting with nut bolts /fasteners complete all as specified and directed by Engr-in-charge
Supply and install desert cooler electric driven (single phase) three speed having nominal air flow capacity 10500 CFM per hour, with propeller ISI cooler fan motor copper winding single phase 950 RPM 490 Watts, 0.67 HP fitted with / having (fan type axial fan/fan noise - 30 inch/68db),submersible pump, Max power consumption of 325 Watts. Cooler body made out from 16 gauge mild steel galvanized iron sheet & water tank made out of 14 SWG, having capacity 120 Ltr minimum including three louvers with wood wool pad, cooling Pad Size Minimum 1100 mm x 100 mm x 1150 mm , flexible PVC distribution pipes and 3 way junction all as directed by Engr-in-Charge and of standard make as approved by User & GE” NOTE : 1. Three speed switch ISI Marked rotary type for propeller fan and one way switch pump with separate control. The switches shall have marking off- Low - medium and high. 2. float valve on water supply connection shall be deemed to be included in unit rate quoted
NOTE:- (i)- Quantities are clubbed in BOQ for different Jobs. For which ref. Annexure-I on Sl. page. No. 51 to 54 of tender document. (ii)- The contract sum shall be arrived at after duducting amount of schedule of "Credit" from the Total quoted amount
Harsh Enterprises
SNEH CORPORATION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .