BID DOCUMENT FOR PROPOSED DEVELOPMENT OF ARTIFICIAL POND WITH OPERATION AND MAINTENANCE FOR (5 YEARS) AT BEHIND SIDDHRAJ SINGH SAROVAR (CHHAB TALAV) IN DAHOD NAGARPALIKA UNDER 15 TH FINANCE SPECIAL (TIED) GRANT YEAR: 2021-22 2022-23 AND 2025-26 GRANT.

Total Amount Rs.

SBD SECTION-7 BILL OF QUANTITIES-392

Note : 4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.:

PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in

R.C.C. items where there is a change as per actual mix design the cost of difference of cement

consumption have been deducted from the rate of original item at the rate of input rate mentioned in

all the tender.

Signature of Contractor President Chief Officer

Dahod Nagarpalika Dahod Nagarpalika

SBD SECTION-7 BILL OF QUANTITIES-393

DHAOD MUNICIPALITY, DAHOD

ESTIMATE FOR STONE PITCHING AND TOE WALL ON ARTIFICAIL POND BOUNDARY AT DAHOD

Item Qty. Description Total Unit Amount

1 528.50 Excavation for foundation upto 1.5 m depth including sorting out

Cmt. and stacking of useful materials and disposing off the

excavated stuff upto 50 Meter lead.(A) Loose or soft soil

2 200.00 Excavation for foundation for depth from 1.5 m to 3.0 m

Cmt. including sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(A)

Loose or soft soil

3 407.50 Filling with available excavated earth in between walls and plinth

Cmt. in layer not exceeding 20cm. In depth including consolidating

ramming, watering in true line and level etc. complete as directed

by Engineer-in-charge.

4 4007.50 Earthwork for embankment including breaking clods, dressing

Cmt. with all lead and lift and including watering rolling and

consolidation of subgrade in layers at O.M.C. to required dry

density including filling the depression which occur during the

process using power roller 8T to 10T.(E) From Borrow area within

5 40.00 Providing and laying rubble for appron (each stone weighting not

Cmt. less than 40Kg.) including and packing and filing in the

interestices with quarry-spalls.

6 162.00 Providing and laying cement concrete 1:3:6 (1- Cement : 3-

Cmt. Coarse sand : 6- crushed stone aggregates 20 mm nominal size)

and curing complete including cost of formwork in (A) Wall Caps /

SBD SECTION-7 BILL OF QUANTITIES-394

7 119.50 Uncoursed Rubble masonary with stone of approved quality in

Cmt. foundation and plinth in Cement mortar 1:5 (1-cement : 5-coarse

sand) etc. complete.

-- do -- for Toe Wall 2580.25 Cmt.

8 212.00 Filling in plinth with sand under floors including watering,

Cmt ramming, consolidating and dressing etc. complete.

9 2390.50 Providing and laying rubble stone pitching 22.50cm thick including

Smt preparing the surface and providing 35cmx35cm panel wall

cement concrete 1:2:4(1 cement : 2 coarse sand : 4 crushed

stone agg 20mm nominal size) @ 3.0mt c/c distance filling

interstices with sand including pointing on pitching in C.M. 1:3

including curing, cost of all materials and labor as directed on site

10 Providing and laying controlled cement concrete M-250 and

curing complete including the cost of formwork but Excluding the

cost of reinforcement for reinforced concrete work in

a. 55.50 Foundation 4538.94 Cmt.

b. 174.50 For Panel Wall And Toe Wall 5827.70 Cmt.

c. 16.50 For Coping 6039.80 Cmt.

d. 50.50 For Curb Beam 5827.70 Cmt.

e. 58.00 For Ovara Stairs 7779.02 Cmt.

f. 52.50 For Rcc Wall 8125.45 Cmt.

11 53370.00 Providing TMT Bar FE 500D reinforcement for R.C.C. work

Kgs. including bending, binding and placing in position complete upto

floor two level 77.29 Kg.

12 7164.00 Providing and fixing M.S. grills of required pattern to wooden

Kgs. frames of windows etc. with M.S. flats at required spacings and

frame alround, square or round bars with round headed bolts and

nuts or by screws (A) Plain Grill.

SBD SECTION-7 BILL OF QUANTITIES-395

13 135.00 Painting two coats (including priming coat) on new steel and other

Smt metal surface with synthetic enamel paint, brushing to give an

even shade including cleaning the surface of all dirt, dust and

other foreign matter. 138.78 Smt.

14 147.00 Providing and laying polished Kota stone slab flooring over 20mm

Smt. (Average) thick base of cement mortar 1:6 (1-cement : 6-coarse

sand) or L.M. 1.1.5 laid over and jointed with grey cement slurry

including rubbing and polishing etc. complete. (B) 30 mm thick

15 4800.00 Providing and laying 1.5 mm thick black HDPE geomembrane

Smt. liner for pond/waterproof lining, including cutting, jointing by heat

welding, overlapping, fixing, testing and all necessary

accessories, complete as directed by Engineer-in-Charge.

16 25.20 Demolition including stacking of serviceable materilas and

Cmt. disposal of unserviceable materials with all lead and lift. (i) R.C.C.

work 1108.12 Cmt.

17 2560.00 Dewatering by pumping set of required capacity including

Hp/Hr temporary platform carting pumping at site and fixing the same in

position including all accessories, and fuel and labour etc.

complete. 21.07 Cmt.

SBD SECTION-7 BILL OF QUANTITIES-396

DAHOD MUNICIPALITY, DAHOD

ESTIMATE FOR COMPOUND WALL FOR ARTIFICIAL POND AT DAHOD

Item Qty. Description Total Unit Amount

1 708.00 Excavation for foundation up to 1:5 mt. Depth including

Cmt. sorting out and stacking of useful materials and

depositing of the excavated stuff up to 50 meter lead.

2 121.00 Excavation for foundation from depth 1:5 mt. to 3.0 mt.

Cmt. Depth including sorting out and stacking of useful

materials and depositing of the excavated stuff up to

meter lead. (a) Loose or soft soil.

3 548.50 Filing available excavated earth (excluding rock) in trenches

Cmt. plinth sides of foundations etc. in layers not exceeding 20cm.

In depth consolidating each deposited layer by remming and

4 89.00 Providing and laying cement concrete 1:3:6 (1- Cement : 3-

Cmt. Coarse sand : 6- crushed stone aggregates 20 mm nominal

size) and curing complete including cost of formwork in (A)

Wall Caps / Coping

5 127.00 Providing and Laying controlled cement concrete M-250 and

Cmt. curing complete, including the cost of formwork but excluding

the cost of reinforcement for reinforced concrete work in

Column footings.

6 23.50 Providing and laying controlled cement concrete M-250 and

Cmt. curing complete including the cost of formwork But Excluding

the cost of reinforcement for reinforced concrete work in

Column upto Plinth Level having any cross section area.

SBD SECTION-7 BILL OF QUANTITIES-397

7 26.50 Providing and Laying controlled cement concrete M-250 and

Cmt. curing complete, including the cost of formwork but excluding

the cost of reinforcement for reinforced concrete work in

Columns having any cross section area upto floor two level.

8 42.50 Providing and laying controlled cement concrete M-250 and

Cmt. curing complete including the cost of formwork but Excluding

the cost of reinforcement for reinforced concrete work in

Ground Beam having any cross section area.

9 11.00 Providing and laying controlled cement concrete M-250 and

Cmt. curing complete including the cost of formwork and excluding

the cost of reinforcement of reinforced concrete work in

-- do -- for Coping 6039.80 Cmt.

22520.00 Providing TMT Bar FE 500D reinforcement for R.C.C.

Kgs. workincluding bending, binding and placing in position

complete uptofloor two level

11 54.00 Brick work using common burnt building bricks having

Cmt. crushing strngth not less than 35 Kg./cm2 in super structure

for Ground Floor in C.M. (1:6) (1 Cement, 6 fine sand)

racking out joints curring etc. complete directed by Engineer-

in-charge. 4114.39 Cmt.

12 1222.00 20 mm thick sand faced cement plaster on walls up to heinht

Smt 10 metres above ground laval cosisting of 12 mm thick

backing coat of C:M 1:3 (1-cement :3-sand) and 8mm thick

finishing coat of C:M 1:1 (1-cement :1-sand) etc complete.

13 1222.00 Finishing wall with water proof exterior emulsion apex paint

Smt of on wall surfaces (two coats) to give an approved brand

and manufacture and of required slope evan shade after

throughly brushing the surface to remove all dirt and remains

of loose powered materials. etc completed.

SBD SECTION-7 BILL OF QUANTITIES-398

Smt. Providing and laying and fixing 50 mm thick expansion joint

by hydro cell semi rigid UV resistance with high performance

laminated closed cell polythene foam joint filler in sheet foam

as directed, etc. complete. 1491.03 Smt.

15 11991.00 Providing and fixing M.S. grills of required pattern to wooden

Kgs. frames of windows etc. with M.S. flats at required spacings

and frame alround, square or round bars with round headed

bolts and nuts or by screws (A) Plain Grill.

16 932.00 Painting two coats (including priming coat) on new steel and

Smt other metal surface with synthetic enamel paint, brushing to

give an even shade including cleaning the surface of all dirt,

dust and other foreign matter.

SBD SECTION-7 BILL OF QUANTITIES-399

DAHOD MUNICIPALITY, DAHOD

ESTIMATE FOR CONSTRUCTION WORK OF PATHWAY FOR ARTICITIAL POND AT DAHOD

Item Qty. Description Totel Per Amount

1 182.00 Box cutting the road surface to proper slope and camber for making

Cmt. a base for road work including removing the excavated stuff and

depositing on the road side slope as directed upto 50Mt.lead.

2 182.00 Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse

Cmt. sand : 6- crushed stone aggregates 20 mm nominal size) and curing

complete including cost of formwork in (A) Wall Caps / Coping

3 1211.50 Providing and fixing pre-cast Rubber Dye / steel Dye inter locking

Smt concrete block 60mm thick with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as per approved design

Confirming to IS 15658 : 2006 including 35 mm Sand layer for

levelling and filling the joint with sand in proper line and level as per

guidlines of IRC : SP 63-2018 etc. Complete

SBD SECTION-7 BILL OF QUANTITIES-400

DAHOD MUNICIPALITY, DAHOD

NAME OF WORK :- ESTIMATE FOR DEVELOPMENT WORK OF ENTRANCE GATE

AT ARTIFICIAL POND AT DAHOD

Item Qty. Description Total Unit Amount

1 11.00 Excavation for base footings upto depth 1.5 m. including sorting

Cmt. out and disposing of the excavated material upto 50 m lead

(loose or soft soil)

2 4.00 Excavation for foundation for depth from 1.5m to 3.0m Including

Cmt. sorting out and stacking of useful materials and disposing of the

excavated stuff up to 50 meter lead(A) Loose or soft soil

3 12.00 Earth filling in foundation trenches with available excavated earth

Cmt. including consolidation leveling etc. complete.

4 1.20 Providing and laying cement concrete 1:3:6 (1 Cement : 3 coarse

Cmt. sand : 6 Crushed stone aggregates 40 mm nominal size) and

curing complete excluding cost of form work in (A) Foundation

5 Providing and laying controlled cement concrete M-250 and

curing complete including the cost of formwork and excluding the

cost of reinforcement of reinforced concrete work in

A. 2.30 -- do -- for R.C.C. Column Footing 4538.94 Cmt.

B. 1.00 -- do -- for R.C.C. Column Upto pl 6431.68 Cmt.

C. 2.00 -- do -- for R.C.C. Column 8377.95 Cmt.

D. 1.00 -- do -- for R.C.C. Ground Beam 5944.86 Cmt.

E. 2.00 -- do -- for R.C.C. Beam 5827.70 Cmt.

F. 2.00 -- do -- for R.C.C. Slab 6414.51 Cmt.

SBD SECTION-7 BILL OF QUANTITIES-401

G. 0.50 -- do -- for R.C.C. Lintel 7789.12 Cmt.

H. 0.50 -- do -- for R.C.C. Pardhi 6448.85 Cmt.

2100.00 Providing T.M.T. Bar Fe 500 / 500-D reinforcement for

Kgs. R.C.C.work including bending, Binding and placing in position

complete upto floor two level.(upto 10 ton)

7 0.30 Providing and Laying Brick work using common burnt clay

Cmt. building bricks (Conventional) having crushing strength not less

than 35 Kg./Sq. Cm. in Super Structure Above Plinth level in

Cement Mortar (1:6) (1 Cement : 6 fine sand) etc. complete for

8 12.00 Providing 10 mm. thick cement plaster in single coat on

Smt. brick/concrete walls for interior plastering up to floor two level and

finished even and smooth in.(I) cement mortar 1 : 3 (1 cement :

9 28.00 Providing 20 mm thick double coat mala cement plaster on

Smt. interior brick/ concrete work for plastering comprising of base

coat of 12 mm thick cement plaster in cement mortar (1 Cement :

4 coarse sand) in rough finishing and 8 mm thick top coat of

cement mortar 1:2 ( 1 Cement : 2 coarse sand) finished with

trovel including scaffolding curing etc. complete.

10 40.00 Finishing wall with weather proof exterior emulsion paint on wall

Smt. surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains of

loose powdered materials.etc complete

11 28.00 Provinding and applying Decorative Texture plaster on

Smt. existing mala plaster with all kinds of material/labour and

scaffolding charges complete as directed site by engg. In

charge or any concern authority.

SBD SECTION-7 BILL OF QUANTITIES-402

12 13.90 Providing and Fixing vertical column cladding and cornice or

Smt G.R.C Or plaster of paris or fiber including or kind of material

labour transportation and scaffolding charges complete as

directed engi. In charge or any concern authority.

SBD SECTION-7 BILL OF QUANTITIES-403

DAHOD MUNICIPALITY, DAHOD

ESTIMATE FOR EXCAVATION WORK AT ARTIFICIAL POND AT DAHOD.

Item Qty. Description Total

No. Rate Per Amount

1 5400.00 Excavation for foundation for depth from 3.0 m to 5.0 m including

Cmt. sorting out and stacking of useful materials and disposing off the

excavated stuff upto 50 Meter lead.(B) Dense or Hard soil

2 5400.00 Extra for additional depth more than 5.0 m for excavation for

Cmt foundation including sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 m lead.(B) Dense or Hard

soil 209.82 Cmt.

SBD SECTION-7 BILL OF QUANTITIES-404

DAHOD MUNICIPALITY, DAHOD

NAME OF WORK :- ESTIMATE FOR SECURITY CABIN AT ARTIFICIAL POND AT DAHOD

Item Qty. Description Total Unit Amount

1 22.00 Excavation for foundation upto 1.5 m depth including sorting out

Cmt. and stacking of useful materials and disposing off the

excavated stuff upto 50 Meter lead.(A) Loose or soft soil 125.86 Cmt.

2 4.00 Excavation for foundation for depth from 1.5 m to 3.0 m including

Cmt. sorting out and stacking of useful materials and disposing off

the excavated stuff upto 50 Meter lead.(A) Loose or soft soil

3 16.28 Filling available excavated earth (excluding rock) in trenches. plinth,

Cmt. sides of foundations etc. in layers not exceeding 20 cm. in depth

consolidating each disposited layer by ramming and watering.

4 4.50 Filling in foundation and plinth with murrum or selected soil in layers

Cmt of 20cm. thickness including watering, ramming and consolidating

5 4.50 Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse

Cmt. sand : 6- hand broken stone aggregates 40 mmnominal size) and

curing complete excluding cost of formwork in (A) Foundation and

Plinth 3005.48 Cmt.

6 9.00 Applying general insecticide pest control treatment to floors,

Smt. cupboards etc including labour materials etc. complete. Using

Imidacloprid 30.5 SCas Per IS 6313 part -II( (0.075% concentration

by mass) is recommended 10.5ml chemical diluted with 5 liters of

water application 0.5 litre chemical /Sqm of surface is recommended

as per I.S. 54.39 Smt.

7 Providing and laying controlled cement concrete M-250 and curing

complete including the cost of formwork and excluding the cost of

reinforcement of reinforced concrete work in

a 4.00 -- do -- for R.C.C. Column Footing 4538.94 Cmt.

SBD SECTION-7 BILL OF QUANTITIES-405

b 1.00 -- do -- for R.C.C. Column Up to PL 6431.68 Cmt.

c 1.50 -- do -- for Ground Beam 5944.86 Cmt.

d 1.50 -- do -- for R.C.C. Column 8377.95 Cmt.

e 0.50 -- do -- for Coping 6039.80 Cmt.

f 0.50 -- do -- for R.C.C.Lintel 7789.12 Cmt.

g 0.50 -- do -- for R.C.C.Chajjah 7789.12 Cmt.

h 1.50 -- do -- for Beam 5827.70 Cmt.

i 4.00 -- do -- for Slab 6414.51 Cmt.

1830.00 Providing T.M.T. Bar Fe 500 / 500-D reinforcement for R.C.C.work

Kgs. including bending, binding and placing in position complete upto floor

two level.(upto 10 ton) 77.29 Kg.

9 1.50 Brick work using common burnt building bricks having crushing

Cmt. strngth not less than 35 Kg./cm2 in super structure for Ground Floor

in C.M. (1:6) (1 Cement, 6 fine sand) racking out joints curring etc.

complete directed by Engineer-in-charge.

10 7.00 Brick work using common burnt building bricks having crushing

Cmt. strngth not less than 35 Kg./cm2 in super structure for Ground Floor

in C.M. (1:6) (1 Cement, 6 fine sand) racking out joints curring etc.

complete directed by Engineer-in-charge. 4141.66 Cmt.

11 12.00 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm

Smt (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on

new surface or fixing on existing flooring by adhesive material

including dismentaling of existing flooring and jointed with color

cement slurry including finised with flush pointing & cleaning the

surface etc. complete for light shade

12 32.88 Providing 15 mm. thick cement plaster in single coat on Rough

Smt. (similar) side of single or half brick walls for interior plastering upto

floor two level and finished even and smooth in. (II) cement mortar

: 4 (1 cement : 4 sand) Extra over item 58 to 64 for finishing with a

floating coat of neat cement slurry. (upto 10 ton) 231.38 Smt.

SBD SECTION-7 BILL OF QUANTITIES-406

13 29.50 Providing 10mm thick cement plaster in single coat on ceilings and

Smt. soffits of stairs for interior plastering and finished even and smooth

in. Cement Mortar 1:4 ( 1 Cement : 4 Sand) and finishing with a

floating coat of neat cement slurry for all floors. 213.93 Smt.

14 75.00 20mm thick sand faced cement plaster on walls upto height

Smt. metres above ground level consisting of 12mm thick backing coat of

C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M.

1:1 (1-cement : 1-sand) etc. complete. 353.98 Smt.

15 62.38 Applying two coats of Birla or Asian acrylic lappy (putty) and two

Smt. coats of primer of approved brand and manufacture on new wall

surface to give an even shade including thoroughly brushing the

surface free from mortar dropping and other foreign matter and sand

Papered smooth. 40.59 Smt.

16 32.88 Distempering (Three Coat) with oil bound washable distemper of

Smt. approved brand and manufacture and of required shade on wall

surfaces to give and even shade over and including a primer coat

with alkali resistance primer of approved brand after throughly

brushing the surface to give and even shade free from foreign

matter and also including preparing the surface even and smooth.

17 29.50 Distempering (Three Coat) with oil bound washable distemper of

Smt. approved brand and manufacture and of required shade on Ceiling &

Sloping Roof surfaces to give and even shade over and including a

primer coat with alkali resistance primer of approved brand after

throughly brushing the surface to give and free from other foreign

matter and also including preparing the surface even and sand

papered smooth.

18 75.00 Finishing wall with weather proof exterior emulsion paint on wall

Smt. surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains of

loose powdered materials.etc complete 122.14 Smt.

19 2.00 Provoding and fixing flush door shutters, solid core construction with

Smt. frame of first class hardwood with cross board and face veneer or

plywood face panels, including anodised alluminium butt hinges with

necessary screws. (B) Non-decorative type and block board core

anodised alluminium butt hinges in flush door shutters (2) 35 mm

SBD SECTION-7 BILL OF QUANTITIES-407

20 4.00 Providing and fixing window having extruded aluminum Colour

Smt. anodized section frame main outer size 95mm x 24mm x 1.17mm @

wt.of 0.738 Kg/mt , horizontal Three track member size 92mm x

31.75mm x 1.30mm,@ Wt.1.07 Kg/mt , vertical member of size

92mm x 31.75mm x 1.50mm @ Wt. 1.06 Kg/mt with sliding shutters

of horizontal member size 40 mmx18mm x1.29mm @ wt.of

Kg/mt, vertical member of size 40mm x 18mm x 1.29 mm @ wt.of

0.456Kg/mt/ with 5 mm thick transparent bronze colour tinted float

glass with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details etc

21 147.00 Providing and fixing M. S. grills of requried pattern to wooden frames

Kgs. of window etc. with M. S. flats at requried spacings and frame

alround square or round bars with round headed bolts and nuts or by

screws. (A) plain grill 110.31 Kgs.

22 12.00 Painting two coats including priming coat and including preparing the

Smt. surface by throughtly cleaning, oil grease, dirt and scoured with

brushes fine steel wood, scrapers and sand papers with ready mixed

priming paint brushing red lead and Painting on new steel surfaces

with synthetic enamel paint brushing to give an even shade

including cleaning the surface of all dirt, dust and other foreign

matter. 138.78 Smt.

23 25.00 Providing and laying broken chine mosaic flooring for terrace using

Smt 12 mm to 20 mm broken pieces of glazed tiles to be laid over

cement mortar 1:3 to plain or slope and to be tempered to bring

mortar creme out upto surface using white cement including

rounding off junctions and extending them upto 15 cm along the

wall,clearing with water and oxalic acid etc. as directed

24 10.00 Providing and supplying in standard length ISI mark rigid

Rmt unplasticised PVC pipes suitable for potable water with ring fit joint

including cost of rings, as per IS Specification no. 4985/1988

including all local and central taxes, transportation, freight charges,

octroi, inspection charges, loading, unloading, conveyance to the

departmental stores and including cost of jointing material etc.

SBD SECTION-7 BILL OF QUANTITIES-408

25 7.50 Providing and laying polished Granite tiles 18 mm thick in risers of

Smt. steps, skirting Dedo and pillars laid on 10 mm thick cement mortar

: 3 (1 cement : 3 course sand) and jointed with gray cement slurry

mixed with pigment to match the shade of slab including rubbing,

polishing, Moulding etc. complete. For Flooring, Doors & Windows

As PER Sub Estimate Rs.

SBD SECTION-7 BILL OF QUANTITIES-409

DAHOD MUNICIPALITY, DAHOD

ESTIMATE FOR PROVINDING, SUPPLYING & ERECTING LED STREET LIGHT AT ARTIFICIAL POND AT DAHOD

Sr. Quantit Uni Discription Total Uni Amount

1 Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper

cable 1.1 KV grade to be erected as directed of following size.

156.00 Rmt (E) 3 Core 2.5 sq. mm 171.70 Rmt

2 Supplying & erecting following spare parts for panel mounting Switch

Disconnector Fuse Units. Operational Handle Assembly Complete for

3 Supplying and erecting triple pole & neutral 440V / 500V panel

mounting Copper Busbars with four equal Nos. of electrolyte bus

having current density not more than 1.6 Amp. / sq.mm (Rated current

/ cross section area) duly wrapped with colour insulating tape for

phase sequence of following current carrying capacity, erected with

necessary bus bar supports /insulators, main cable socket to each bar,

erected in existing cubical panel with necessary connections. (A)

3.00 Rmt Suitable for 100 Amp. Capacity. 1961.42 Rmt

4 Supplying & erecting following spare parts for panel mounting Switch

Disconnector Fuse Units. Neutral Link for (i) 32/63/125 Amps.

5 Supplying and erecting approved make 415V bakelite fuse fittings for

front connection / busbar type, to accommodate HRC fuse link, with

spin - riveted brass contact, having thermo plastic inflammable

material & single piece extruded brass box contact to lock with

adequate cable hole to accommodate aluminium conductors suitable

for (without HRC fuse). For 63 Amp.

6 Supplying and erecting Ammeter / Voltmeter selector switch for

phase AC Supply 500 V on existing panel board with necessary

3.00 No. connections. 317.14 Ea.

7 Supplying and erecting approved make set of indicator lamps of LED

type lamp, lens cover, Bakelite holder complete erected with

necessary connections.

SBD SECTION-7 BILL OF QUANTITIES-410

8 Providing & erecting Spares For Air Circuit Breakers as follows: (B)

Auxiliary Contact Block for CN-CS 800 to 2500 & 6 NO + 6 NC

9 Mains with ISI marked, 1.5KV grade electrolyte multi stranded,

annealed copper conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing pipe of following size

(Specifically for control panel, relays, power switchgears, motor

starters & control wiring) with required size of copper lugs, nuts and

bolts if required.

60.00 Mtr. For Control Cable.(c) One wire 2.50 sq. mm 34.34 Mtr.

10 Mains with ISI marked, 1.5KV grade electrolyte multi stranded,

annealed copper conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing pipe of following size

(Specifically for control panel, relays, power switchgears, motor

starters & control wiring) with required size of copper lugs, nuts and

bolts if required.

150.00 Mtr. For Power Cable. (d) One wire 4.00 sq. mm 46.46 Mtr.

11 24.00 No. Approved make Four pole moulded case circuit breaker having

breaking capacity ICU of 25 K.A. at 415 V, having normal current

rating up to 25 A to 100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 cys. with all internal connections &

complete erected in 16 G.M.S. housing on angle frame. with

Housing/Encloser (The Enclousers should be used of same company

of MCCBs to be used) Cat.III

12 Approved make ELCBs / RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit withstand capacity of 6 KA and

suitable for operation on 3 phase and neutral 415V. having

charectorstic of quick action & tripping with all advance feature & do

not incorporate any electronic component for following Max. rating

erected as directed.

3.00 No. (iii) 63 Amps. FP Cat.III 3344.11 Ea.

13 Providing & erecting 240 V MCB Double pole switch for lighting Load

(B Curve) having 10 KA breaking capacity & confirms to IS : 8828 in

existing box having following capacity.

24.00 No. (A) 6 to 32 Amp. Cat-III. 307.04 Ea.

14 130.00 Kgs. Providing and erecting Annealed bare Copper wire 8 to 16 S.W.G.

15 24.00 No. Pipe type earthing having 150 cms. long and 2.5 cms. dia. galvanised

iron pipe with coupling and buch burried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

SBD SECTION-7 BILL OF QUANTITIES-411

16 Supplying & erecting funnel type earthing having earth plate of

following size burrid in specifically prepared earth pit 3 mtr. below

ground with 40 kg. charcol and salt with alternate layers of charcol &

salt, 20mm.dia. G.I. pipe with Funnel with a wire mesh for watering &

bricks masonry block, C.I. Cover complete as per para 7.3 of IS

with necessary length of double G.1 / copper earth wire No 6 SWG

bolted with lug to the plate and covered in 12 mm dia. G.I. pipe 2.5 mtr

long complete connected to the nearest switch gear with end socket as

per direction & duly tested by earth tester confirming to ISS (As per

drawing)with following specification.

3.00 No. (C) with 60 x 60 x 0.315 cms. Copper earth plate 7874.97 Ea.

17 24.00 No. For using salt and charcoal/coke as required for pipe type earthing. 171.70 Ea.

18 Providing and erecting XLPE (IS:7098)(I)-88 ISI marked armoured

cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing cable trench / pipe at road

crossing or floor of following size of cables.

396.00 Mtr. (C) 4 core 10 Sq. mm 168.67 Mtr.

19 396.00 Mtr. Providing & laying approved make Double Walled Corugated pipe

(DWC) of polythylene (Confirming to IS-14930-II) with necessary

connecting accessories of same materials at required depth for laying

of cable. Below ground / road surface for enclosing cable and back

filling the same to make ground as per original. (C) 50 mm Dia

20 Supplying following size of Light duty “A” Class G.I. Pipe & erecting

as directed by Engineer-in-charge.

396.00 Mtr. (B) 50 mm dia 300.98 Mtr.

21 Providing and, fixing heavy duty flange type brass cable gland with

rubber ring for PVC insulated armoured cable complete with out going

tails, insulating tape etc for following size of cables.

24.00 No. (c) 2 to 4 core 10 Sq. mm 38.38 Ea.

22 Providing and, fixing heavy duty flange type brass cable gland with

rubber ring for PVC insulated armoured cable complete with out going

tails, insulating tape etc for following size of cables.

24.00 No. (d) 2 to 4 core 16 Sq. mm 47.47 Ea.

23 Providing and, fixing heavy duty flange type brass cable gland with

rubber ring for PVC insulated armoured cable complete with out going

tails, insulating tape etc for following size of cables.

4.00 No. (e) 2 to 4 core 25 Sq. mm 51.51 Ea.

SBD SECTION-7 BILL OF QUANTITIES-412

24 24.00 No. Supplying and erecting approved make Octagonal pole made from HR

sheet steel. The pole should be made as per IS. and shall be coated

with hot dip galvanizing as per IS 2629/2633/4759, suitable suspend

local wind speed with integral Junction box consist of terminal plate of

min 6mm Hylam sheet, standard profile 35mmX7.5mm Din-Rail for

MCB Mounting, stud type terminal and arrangement for cable

termination to be erected on suitable foundation (included).

(C) 5 Mtr. Long 70 mm Top X 130 mm bottom dia, 3 mm thickness

with 200mmX200mmX12mm base plate, 4-M16 Bolts and 600mm

long with necessary G.I. J Bolts .Approx Pole weight 46 kg

25 Providing Decorative street light pole bracket consisting of Light Class

M.S. pipe of 4.2 cms. outside dia. complete with suitable M.S. sleeve

tubing of approximate 45 cms. and length suitable for 76.5 mm/

80mm./ require size pole top having sufficient fastners for fixing the

brackets and having spread of 1 mtr. length with suitble rise as per site

condition & suitable welded stiffner reducer and nipple with check nut

complete painted with one coat of Red oxide/PU base primer and two

coats of Aluminium/PU paint.with following nos. of arms. [A] Single

Arm Bracket 1.5 Mtr

26 Supplying and erecting LED street light / Flood light fittings with High

power White LEDs wattage of 3 Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High

pressure die cast aluminum housing with smooth finish powder coated

and heat sink extruded aluminium with diffuser and Polycarbonate

optics/ lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than 0.95,

THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges

shown.)(A) Street Light (IP-65), Surge protection -4KV integral and

,Light must have 440VAC line supply with over-voltage protection.(i)

36 - 47 watts Cat-III

27 3.00 No. Supplying & erecting approved make Digital time switch having lithium

cell 6 years operative and operate battery backup 1 channel day clock

with 14 memory programme, suitable to operate on 240V + 5%, 16A

with, floating contacts Minimum switching setup time 1 minimum &

LCD display. Also comporised permanent ON/OFF switching.

Programming switches & housed in fire proof thermoplastic enclosure

& transperent cover erected as required with necessary connection.

SBD SECTION-7 BILL OF QUANTITIES-413

28 3.00 No. Providing and erecting Sheet Steel powder coated MCB distribution

board - flush / surface mounted fitted with busbar, neutral link, earth

bar and DIN rail, confirming to IS 13032 and BS 5486-1986 without

MCB to house appropriate nos. of MCBs.(The DBs should be used of

same company of MCB to be used). (B) Three phase 4 way SS Double

door for single phase outgoing horizontal box. 2339.16 Ea.

29 3.00 Ea Supplying & erecting power contactor for time switch complete erected

as per direction Cat III 1883.65 Ea

(B)2 pole 250V 32 Amp

30 3.00 No. Supplying & erecting MINI SECTION PILLAR 75 x 60 x 45 cms

fabricated from 16 Gauge thick joint legs M.S. Sheet with angle iron

legs 45 cms long made from 35x35x5 mm thick.Jointless M.S. Angle

with cable clamps to be buried in ground to have appropriate erectionb

to work Uniform Until erected with cement concrete foundation and

45cms high bricks work finishing with plaster ect. hinged double door

with 3" * 4" vision panel covered with Mesh & V. panel overlapping with

flap for meter reading inernally supported on both side, with itnternal

and outside looking arrangement with look and keys in duplicate

35*35*5 mm M.S. Angle of Two Nos. one is welded and other with nut

and bolt for erecting bakelite sheet. Painting the Section pillar inside

and out side with Seven tank powder coated paint.. Section pillar roof

shoud be without joint with water leakage proof & tested as per IP

test & followed by IS 2147 of

For GEB Connection Charges Rs.

SBD SECTION-7 BILL OF QUANTITIES-414

DAHOD MUNICIPALITY, DAHOD SCHEDULE B-8

Name of Work :- Proposed HSCF Pumping Machinery at Proposed Artificial Pond at Dahod. 40 HP, 7600 LPM & 15 Mt. Head. 1 Sets (1 Working). At Dahod

Item Description of Items Qty. Unit Rate (Rs.) Amount (Rs.)

1 Supply, installation, testing & commissioning of horizontal split casing centrifugal pump motor set of specified duty parameters

& guaranteed efficiency of following MOC with specified capacity, horizontal foot mounted TEFC squirrel cage induction motor

(with minimum IE-3 efficiency class), working on three phase AC supply with 50 Hz ± 3%, 415 V ± 10%, rated speed 1450 RPM

along with fabricated MS base frame, coupling, coupling guard, foundation bolts etc. as per relevant IS. M.O.C.: Impeller &

Wearing Rings: CF8M, Casing: Cast Steel WCB , Shaft: SS 410, Shaft Sleeve: SS 410, Mechanical Seal (Above 30 kW), Base

Frame: MS. 40 HP 7600 LPM & 15 Mt Head. 1 sets 279790.00

2 Supply and install heavy duty through the weave polyurethane(PU) covered fire hose with coupling made from 100% high

tenacity synthetic yarn circular woven and completely embedded in the PU compound,

protected against mechanical damage, forming a single homogenous construction without the use of any glue or adhesive of

any type, resistance to abrasion, heat, oil, fuel, a wide range of chemicals, weathering and ozone, working pressure 8 kg/cm2

and burst pressure 20 kg/cm2. (C) Hose 300 mm dia. 25 RMT. 5821.88

3 Manufacture, Supply & Delivery of Ductile Iron Flange socket spigot bends, tees, reducers or any other specials as per BS-EN-

545/1995 Class-A series K12 suitable for use with D.I. Pipes manufactured as per IS:8329/1994 delivery of specials is to be

made to GWSSB store or site of works any where in Gujarat including all taxes, loading, unloading, carting, stacking,

insurance, inspection charges, octroi etc. complete. With external bitumen & zinc coating & internal cement mortar lining.

Flanged ended. Up to 300. 250 Kg 151.00

4 Providing and cast in situ C.C. in grade M-20 (approx. corresp. to prop. 1:1.5:3) (proportions as per mix design or as per table9

of IS456 2000 in masses by weigh batching ) using quartzite trap metal of size 12 mm to 20 mm and or 6 mm to 12 mm

including scaffolding centering form work, needle vibrated consolidation, curing and hydraulic testing etc. complete (excluding

cost of reinforcement) with centering and shuttering/deshuttering etc. complete up to 6 meter height/depth from Av. G.L. for all

structures with water proofing compound. For Foundation and Thrust Block. 2 Cu. mtr 8399.60

5 Supplying and erecting approved make3 phase motor control panel (ATS) made from 16 G. CRCA sheet duly painted with

epoxy power paint inside and outside with hinged doors and locking arrangement, consisting, of suitable switch of AC 23 duty

with HRC fuses (Cat.III), starting and running contactors, overload relay, Automatic water level controller, Electronic timer with

master timer CT operated Ammeter with selector switch, Voltmeter with selector switch, phase indicating lamps, single phasing

preventer , water level guard, over load, start, run and stop push buttons, air cooled auto transformer with 60%, 70%, 80%

tapping, Panel to be erected on angle iron frame grouted on wall as directed., contactors relays, timer etc. shall be of L & T

Siemens / Cutler Hammer make. (D) Suitable for 40 H.P. 1 No 45476.26

6 Supply, laying, testing & commissioning 1.1 kV grade, XLPE insulated, stranded Copper conductor, galvanised steel flat strip /

round wire armoured, extruded PVC type ST2 sheathed, heavy duty cable (to be laid on wall surface with necessary clamps / in

existing cable trench / cable trays / conduit / pipe sleeves at road crossing or floor as per site requirement) conforming to

IS:7098 (Part-1) & IEC:60502 (Part-1), of following sizes: Size 1 x 3 x 25 sq. mm. 100 Mtr. 534.00

Size 1 x 3 x 16 sq. mm. 50 Mtr. 324.00

SBD SECTION-7 BILL OF QUANTITIES-415

Item Description of Items Qty. Unit Rate (Rs.) Amount (Rs.)

7 Supplying & erecting in earthpit of minimum bore dia. 225mm size approved make Safe Earthing Electrode consisting Pipe-in-

Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 80 mm having 80-

200 Micron galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising, connection terminal dia of 14 mm with

constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of

applications with chamber and heavy duty cover (A)(approved make OEM has to submit test certificate including value of earth

resistance of installation duly stamped and signed by agency and officer Incharge has to ensure the value of earthing resistane

mentioned in test Certificate) & having back filling compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm /

meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%. [B] For Electrical

installation up to 11 kV located in other than normal soil i.e. Soft Rock, Marshy Soil etc.

-Length of Pipe : 2 mtr

-Back filling Compound :1 no. Bag of 25 Kg.

8 Supplying 4mm rubber matting of following thickness as per IS : 15652/IEC 61111. 5 Sq.mtr 1200.00

Say, Amount Rs.

SBD SECTION-7 BILL OF QUANTITIES-416

DAHOD MUNICIPALITY, DAHOD

NAME OF WORK :- ESTIMATE FOR PUMP ROOM AT ARTIFICIAL POND AT DAHOD

Item Qty. Description Total Unit Amount

1 24.00 Excavation for foundation upto 1.5 m depth including sorting

Cmt. out and stacking of useful materials and disposing off the

excavated stuff upto 50 Meter lead.(A) Loose or soft soil

2 4.50 Excavation for foundation for depth from 1.5 m to 3.0 m

Cmt. including sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(A)

Loose or soft soil 139.54 Cmt.

3 16.10 Filling available excavated earth (excluding rock) in trenches.

Cmt. plinth, sides of foundations etc. in layers not exceeding 20 cm. in

depth consolidating each disposited layer by ramming and

watering. 137.47 Cmt.

4 5.50 Filling in foundation and plinth with murrum or selected soil in

Cmt layers of 20cm. thickness including watering, ramming and

consolidating etc. complete

5 5.00 Providing and laying cement concrete 1:3:6 (1-Cement : 3-

Cmt. coarse sand : 6- hand broken stone aggregates 40 mmnominal

size) and curing complete excluding cost of formwork in (A)

Foundation and Plinth

6 12.00 Applying general insecticide pest control treatment to floors,

Smt. cupboards etc including labour materials etc. complete. Using

Imidacloprid 30.5 SCas Per IS 6313 part -II( (0.075%

concentration by mass) is recommended 10.5ml chemical diluted

with 5 liters of water application 0.5 litre chemical /Sqm of surface

is recommended as per I.S. 54.39 Smt.

7 Providing and laying controlled cement concrete M-250 and

curing complete including the cost of formwork and excluding the

cost of reinforcement of reinforced concrete work in

SBD SECTION-7 BILL OF QUANTITIES-417

a 5.00 -- do -- for R.C.C. Column Footing 4538.94 Cmt.

b 1.50 -- do -- for R.C.C. Column Up to PL 6431.68 Cmt.

c 2.00 -- do -- for Ground Beam 5944.86 Cmt.

d 2.50 -- do -- for R.C.C. Column 8377.95 Cmt.

e 2.50 -- do -- for Floor Slab 4640.95 Cmt.

f 0.50 -- do -- for R.C.C.Lintel 7789.12 Cmt.

g 0.50 -- do -- for R.C.C.Chajjah 7789.12 Cmt.

h 2.00 -- do -- for Beam 5827.70 Cmt.

i 2.50 -- do -- for Slab 6414.51 Cmt.

2500.00 Providing T.M.T. Bar Fe 500 / 500-D reinforcement for

Kgs. R.C.C.work including bending, binding and placing in position

complete upto floor two level.(upto 10 ton)

9 1.50 Brick work using common burnt building bricks having crushing

Cmt. strngth not less than 35 Kg./cm2 in super structure for Ground

Floor in C.M. (1:6) (1 Cement, 6 fine sand) racking out joints

curring etc. complete directed by Engineer-in-charge. 3853.23 Cmt.

10 10.50 Brick work using common burnt building bricks having crushing

Cmt. strngth not less than 35 Kg./cm2 in super structure for Ground

Floor in C.M. (1:6) (1 Cement, 6 fine sand) racking out joints

curring etc. complete directed by Engineer-in-charge.

11 15.00 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm

Smt (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand)

on new surface or fixing on existing flooring by adhesive material

including dismentaling of existing flooring and jointed with color

cement slurry including finised with flush pointing & cleaning the

surface etc. complete for light shade

SBD SECTION-7 BILL OF QUANTITIES-418

12 40.58 Providing 15 mm. thick cement plaster in single coat on Rough

Smt. (similar) side of single or half brick walls for interior plastering

upto floor two level and finished even and smooth in. (II) cement

mortar 1 : 4 (1 cement : 4 sand) Extra over item 58 to 64 for

finishing with a floating coat of neat cement slurry. (upto 10 ton)

13 16.50 Providing 10mm thick cement plaster in single coat on ceilings

Smt. and soffits of stairs for interior plastering and finished even and

smooth in. Cement Mortar 1:4 ( 1 Cement : 4 Sand) and finishing

with a floating coat of neat cement slurry for all floors.

14 50.00 20mm thick sand faced cement plaster on walls upto height

Smt. metres above ground level consisting of 12mm thick backing coat

of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of

C.M. 1:1 (1-cement : 1-sand) etc. complete. 353.98 Smt.

15 57.08 Applying two coats of Birla or Asian acrylic lappy (putty) and two

Smt. coats of primer of approved brand and manufacture on new wall

surface to give an even shade including thoroughly brushing the

surface free from mortar dropping and other foreign matter and

sand Papered smooth. 40.59 Smt.

16 40.58 Distempering (Three Coat) with oil bound washable distemper of

Smt. approved brand and manufacture and of required shade on wall

surfaces to give and even shade over and including a primer coat

with alkali resistance primer of approved brand after throughly

brushing the surface to give and even shade free from foreign

matter and also including preparing the surface even and smooth.

17 16.50 Distempering (Three Coat) with oil bound washable distemper of

Smt. approved brand and manufacture and of required shade on

Ceiling & Sloping Roof surfaces to give and even shade over and

including a primer coat with alkali resistance primer of approved

brand after throughly brushing the surface to give and free from

other foreign matter and also including preparing the surface

even and sand papered smooth.

18 50.00 Finishing wall with weather proof exterior emulsion paint on wall

Smt. surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains of

loose powdered materials.etc complete

SBD SECTION-7 BILL OF QUANTITIES-419

19 2.00 Provoding and fixing flush door shutters, solid core construction

Smt. with frame of first class hardwood with cross board and face

veneer or plywood face panels, including anodised alluminium

butt hinges with necessary screws. (B) Non-decorative type and

block board core anodised alluminium butt hinges in flush door

shutters (2) 35 mm thick.

20 4.00 Providing and fixing window having extruded aluminum Colour

Smt. anodized section frame main outer size 95mm x 24mm x 1.17mm

@ wt.of 0.738 Kg/mt , horizontal Three track member size 92mm

x 31.75mm x 1.30mm,@ Wt.1.07 Kg/mt , vertical member of size

92mm x 31.75mm x 1.50mm @ Wt. 1.06 Kg/mt with sliding

shutters of horizontal member size 40 mmx18mm x1.29mm @

wt.of 0.456 Kg/mt, vertical member of size 40mm x 18mm x

mm @ wt.of 0.456Kg/mt/ with 5 mm thick transparent bronze

colour tinted float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to frame as

per details etc

21 147.00 Providing and fixing M. S. grills of requried pattern to wooden

Kgs. frames of window etc. with M. S. flats at requried spacings and

frame alround square or round bars with round headed bolts and

nuts or by screws. (A) plain grill 110.31 Kgs.

22 12.00 Painting two coats including priming coat and including preparing

Smt. the surface by throughtly cleaning, oil grease, dirt and scoured

with brushes fine steel wood, scrapers and sand papers with

ready mixed priming paint brushing red lead and Painting on new

steel surfaces with synthetic enamel paint brushing to give an

even shade including cleaning the surface of all dirt, dust and

other foreign matter. 138.78 Smt.

23 15.50 Providing and laying broken chine mosaic flooring for terrace

Smt using 12 mm to 20 mm broken pieces of glazed tiles to be laid

over cement mortar 1:3 to plain or slope and to be tempered to

bring mortar creme out upto surface using white cement including

rounding off junctions and extending them upto 15 cm along the

wall,clearing with water and oxalic acid etc. as directed

24 10.00 Providing and supplying in standard length ISI mark rigid

Rmt unplasticised PVC pipes suitable for potable water with ring fit

joint including cost of rings, as per IS Specification no. 4985/1988

including all local and central taxes, transportation, freight

charges, octroi, inspection charges, loading, unloading,

conveyance to the departmental stores and including cost of

jointing material etc. complete. 110.41 Rmt.

SBD SECTION-7 BILL OF QUANTITIES-420

25 7.50 Providing and laying polished Granite tiles 18 mm thick in risers

Smt. of steps, skirting Dedo and pillars laid on 10 mm thick cement

mortar 1 : 3 (1 cement : 3 course sand) and jointed with gray

cement slurry mixed with pigment to match the shade of slab

including rubbing, polishing, Moulding etc. complete. For Flooring,

Doors & Windows Edges.

As PER Sub Estimate Rs.

SBD SECTION-7 BILL OF QUANTITIES-421

DAHOD MUNICIPALITY, DAHOD

ELECTRICAL INSTALLATION WORK FORPUMP ROOM AT ARTIFICIAL POND AT DAHOD

SUB ESTIMATE ELECTRICAL

SR REF. NO. DESCRIPTION QTY UNIT RATE RATE AMOUNT

1 1-2-1. Point wiring for Light / Bell with 2-1.5

sq.mm & earthwire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multistrand

copper wires, in following type of pipe to

be erected concealed in/ on surface on

wall/ceiling complete with 6A Modular

type switch / bell push & accessories and

earth continuity of following type, erected

on PVC / Metallic box, single mounting

base frame covered with

textured/metallic front plate modules

erected on / in wall / ceiling as per pipe

erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as

(a) with medium class Rigid PVC pipe

and accessories Cat. III 4.00 Pt. 534.00 539.34

2 1-2-2. Point wiring for FAN with 2-1.5 sq.mm &

earthwire of 1.5 sq.mm (Green) both are

of .ISI marked 1.1 KV Grade FRLS PVC

insulated multistrand copper wires, in

following type of pipe to be erected

concealed in / flushed on wall/ceiling

complete with 6A Modular type switch

and hum free EME four or more step

type electronic fan regulator with

separately mounted and accessories

with earth continuity of following type

erected on PVC / Metallic box, single

mounting base frame covered with

textured/metallic front plate modules

erected on / in wall / ceiling as per pipe

erected. with necessary ceiling rose /

H.D.Connector as directed.

(a) with medium class Rigid PVC pipe

and accessories Cat. III

3 1-2-3. Point wiring for Individual Plug with &

earthwire of 1.5 sq.mm (Green) both are

of ISI marked 1.1 KV grade FRLS PVC

insulated multistrand copper wires, in

following type of to be erected concealed

in / on surface of wall / ceiling complete

with Modular type switch & 5 pin Plug

erected on PVC / Metallic box covered

with appropriate front plate modules

erected on / in wall / ceiling as per pipe

erected with following type of

[I] For 6A Plug with 2-1.5 sq.mm Cu.

(a) with medium class Rigid PVC pipe

and accessoriesCat. III 1.00 Pt. 565.00 570.65

4 1-2-3. [II] For 16A Plug with 2-2.5 sq.mm Cu.

(a) with medium class Rigid PVC pipe

and accessories Cat. III 1.00 Pt. 845.00 853.45

5 1-2-4. Point wiring for Looped Plug with 6A

Modular type switch & 5 pin socket

erected on PVC / Metallic box, single

mounting base frame covered with

textured / metallic front plate modules

erected on / in wall / ceiling with

following type accessories Cat. III 1.00 Pt. 306.00 309.06

6 1-4-1. Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper

conductor wire in following type of pipe

to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded

wire of green colour for earth continuity

of following size (a) with medium class

Rigid PVC pipe and accessories (b)

7 1-4-2. Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper

conductor wire in following type of pipe to

be erected in / on wall / ceiling with

sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour

for earth continuity of following size (a)

with medium class Rigid PVC pipe and

accessories (a) 2 wire 4 sq. mm

8 1-6-2. Providing & erecting Switch board for

Computer or electric apparatus

consisting of following items in single

board erected on PVC / Metal board

with 3 mm thick PC (Polycarbonate) /

Acrylic sheet erected as directed

1 no. 6A/16A universal plug-switch

4 nos. 6A Switch

4 nos. 6A 5 pin Plug

[B] For Modular Type Accessories Cat. III

9 3-2-2. Providing Approved make Triple Pole

Metal Clad Switch Fuse Unit 415/500 V.

with HRC fuse of suitable load and

neutral link confirming to IS (a)200 A

10 3-2-5. Erection & connection Charges for 200A/

250A/ 300 A /325 A HRC TPN as

(b)Erection on New angle iron frame duly

painted with red oxide . 1.00 Ea. 196.00 197.96

11 3-11-5. Providing and erecting Sheet Steel

powder coated MCB distribution board -

flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN

rail, confirming to IS 13032 and BS 5486-

1986 without MCB to house appropriate

nos. of MCBs.(The DBs should be used

of same company of MCB to be used)

(N) Three phase 8 way SS Double door

for horizontal single phase outgoing

12 3-10-1. Miniature circuit breaker single pole 6A to

32A suitable to operate on 240 V A.C.

system and having breaking capacity

KA to be erected in existing box.

confirming to IS 8828/1996 with ISI Mark

13 3-4-1. Approved make Four pole moulded case

circuit breaker having breaking capacity

ICU of 25 KA. at 415 V,having normal

current rating up to 25 A to 100A. with

Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s.

with all internal connections & complete

erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

14 9-2-9 Supplying and erecting approved make

set of indicator lamps of LED type lamp,

lens cover, Bakelite holder complete

erected with necessary connections.

15 3-14-12 Supplying & erecting funnel type earthing

having earth plate of following size

burred in specifically prepared earth pit

3 mtr. below ground with 40 kg. charcoal

and salt with alternate layers of charcoal

& salt, 20mm.dia. G.I. pipe with Funnel

with a wire mesh for watering & bricks

masonry block, C.I. Cover complete as

per para 7.3 of IS 3043 with necessary

length of double Galvanised Iron / copper

earth wire No 6 SWG bolted with lug to

the plate and covered in 12 mm dia. G.I.

pipe 2.5 mtr long complete connected to

the nearest switch gear with end socket

as per direction & duly tested by earth

tester confirming to IS (As per drawing)

with following specification

(A) With 30 x 30 x 0.35 cms: C.I. earth

16 5-1-1. Providing and erecting Approved make

Ceiling fan with double ball bearing ISI

mark with condenser A.C. 23OV.50

c/s.1200 mm. sweep complete, canopy

and 30 cms. down rod erected on

existing hook or clamp with 24/0.2 ,

core flexible wire with earthing. [Make

shall be approved by Engineer in charge]

17 5-2-5. Providing 2.5mm.thick laminated acrylic

sheet to cover the fan hook or Fan box.

18 5-2-4. Providing Fan clamp of 30 x 5 mm flat of

required length & 10 mm M.S. Bolt &

Nuts erected with necessary hook of

mm M.S. Round Bar. 1.00 Ea. 98.00 98.98

19 14-01 (A) Tube Light with integral/ non-integral

driver (d) 20-22 Watts, Surge - 4KV,IP-

20 5-3-3. Supplying & erecting approved make low

noise decorative exhaust fan having size

200mm with 1350 RPM with square

frame ABS body with inbuilt lowers &

square frame. 2.00 Ea. 1353.00 1366.53