Delhi

Active

Works

Electrical Works

Maintenance of Street Lights, High Masts on Delhi PWD Roads under PWD M-South Division during 2026-27

Public Works Department

New Delhi | South East Delhi, Delhi

Amount: ₹5.9 LCloses: 19 Oct 20262d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published12 Oct 2026
Closes19 Oct 2026
Bid Opening19 Oct 2026

Tender Value

₹5.9 L

EMD Value

₹11,834

Closing Date

19 Oct 2026, 3:00 pm2d left

Tender Inviting Organisation

Name

Assistant Engineer (E) SD-III

Address

O/o The Assistant Engineer (E), PWD EMSD-3 (M-South), Ishwar Nagar near Kalka More, New Delhi-110065

Work Description

Replacement of Wornout/Out of Warranty with upgraded LED street light fittings at Various Road Under M-South Division

Tender Information

Tender ID

2026_PWD_299850_1

Reference Number

81/EE(E)/South /Elect. Divn.,/PWD/ 2026-27

Tender Type

Open Tender

Product Category

Electrical Works

Form of Contract

Works

Period of Work

30 days

Location

New Delhi

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

11 documents required · 11 mandatory

Fee/PreQual/Technical

RequiredEarnest Money as per NIT (.pdf)

RequiredScan copy of Certificate of registration with CPWD OR Work experience certificate of similar nature (.pdf)

Requirediii) Certificate of Registration for GST and acknowledgement of upto date filed return. (.pdf)

Requirediv) Copy of receipt for deposition of original EMD issued from division office of any Executive En (.pdf)

Requiredv) Scan copy of Valid Electrical Contractor License issued by competent authority OR Undertaking (.pdf)

Requiredvi) Certificate of Financial Turnover and loss/profit from CA as specified in PQ criteria. (For Non (.pdf)

Requiredvii) Scan copy of Bankers Certificate as per Form B or Net Worth as per Form B1 (for Non CPWD con (.pdf)

Requiredviii) Affidavit on Non Judicial Stamp Paper of Rs. 100 as per Form-E (Required from both (.pdf)

Requiredix) Affidavit on Non Judicial Stamp Paper of Rs. 100 Back as per Form-F (Required Non Registered Con (.pdf)

Requiredx) Affidavit on Non Judicial Stamp Paper of Rs. 200/- as per Form-G (Required from both CPWD and non (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹11,834

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

12 Oct 2026

Published

12 Oct 2026

Bid Opening

19 Oct 2026

Download Starts

12 Oct 2026

Download Ends

19 Oct 2026

Submission Starts

12 Oct 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (4 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Supplying, installation, Testing & Commissioning of Street light LED fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).
1.1	150 watt	50	Nos.	5,090	₹2,54,500
1.2	200 watt	50	Nos.	6,142	₹3,07,100
2	Providing and Fixing of suitable size reducer & nipple on the existing pole bracket etc complete as reqd.	100	Nos.	601	₹60,100
3Credit for the below mentioned accidental/distorted items i/c dismentling and shifting from site:-
3.1	Assorted size Old wornout/Out of Warranty fittings	100	Nos.	300	₹30,000

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 2.29 MB

Work Item Documents

BOQ_400172.xls

BOQ • 0.29 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Supplying, installation, Testing & Commissioning of Street light LED fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).
1.1	150 watt	50	Nos.	5,090	₹2,54,500
1.2	200 watt	50	Nos.	6,142	₹3,07,100
2	Providing and Fixing of suitable size reducer & nipple on the existing pole bracket etc complete as reqd.	100	Nos.	601	₹60,100
3Credit for the below mentioned accidental/distorted items i/c dismentling and shifting from site:-
3.1	Assorted size Old wornout/Out of Warranty fittings	100	Nos.	300	₹30,000

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Supplying, installation, Testing & Commissioning of Street light LED fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).

1.1

150 watt

Nos.

5,090

₹2,54,500

1.2

200 watt

Nos.

6,142

₹3,07,100

Providing and Fixing of suitable size reducer & nipple on the existing pole bracket etc complete as reqd.

100

Nos.

601

₹60,100

3Credit for the below mentioned accidental/distorted items i/c dismentling and shifting from site:-

3.1

Assorted size Old wornout/Out of Warranty fittings

100

Nos.

300

₹30,000