SPECIAL REPAIRS FOR REPLACEMENT OF INCINERATOR CHIMNEY AT INHS SANJIVANI , SPECIAL REPAIRS/ REPLACEMENT OF BER DECLARED CEILING FAN AT NAD ALWAYE AND PROVISION OF DEFICIENT STREET LIGHTS AND GARDEN LIGHTS AT INHS SANJIVANI.

Amount

Supply and fix ceiling fan 1200 mm sweep, 230 volts, BEE 5 Star rated (BLDC) of 26 watt ISI Marked with canopy and hanging rod with all accessories such as nuts, bolts, clamps etc complete including dismantling and depositing the old one in MES Store at AGE B/R Alwaye complete all as specified and as directed

Supply and fix ceiling fan 1400 mm sweep, 230 volts, BEE 5 Star rated (BLDC) of 35 watt ISI Marked with canopy and hanging rod with all accessories such as nuts, bolts, clamps etc complete including dismantling and depositing the old one in MES Store at AGE B/R Alwaye complete all as specified and as directed

Supply and fix stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd complete all as specified and as directed

Material and labour for down rod (hanging rod) made of GI Tubing 20 mm bore medium grade for length 0.90 suitable for Ceiling fan of size 1200mm/1400mm sweep including provision of holes at both ends for fixing nut and bolts complete all as specified and as directed

Material and labour for down rod (hanging rod) made of GI Tubing 20 mm bore medium grade for length 2 mtr suitable for Ceiling fan of size 1200mm/1400mm sweep including provision of holes at both ends for fixing nut and bolts complete all as specified and as directed

Supply, installation, Testing and Commissioning of 7M hot dip galvanized Octagonal pole with IS 2062/BS EN 10025 or equivalent HR steel sheet for shaft IS 2062 or equivalent for base plate with hinged door opening arrangements,including suitable boards,bakelite sheet and MCBs as per IS specifications suitable to withstand the wind speed as per IS 875 (part - III) 7 Mtrs pole in single section and single joint welded as per IS 9595/IS 10178AWS having dimensions bottom 130 mm A/F,top 70 mm A/F with sheet thickness 3 mm,suitable base plate of 200x200x12 mm and 04 Nos of 20 x 600 mm long J bolts alongwith common template and with double arm and the pole shall be hot dip galvanized as per BS EN ISO 1461 average coating should be 55 microns,pole model type: BOP 7030. The total height of the pole above the finished Ground level including PCC foundation, J Bolt, nuts and washers shall be as per the drawing of Manufacturer complete all as specified and as directed

Supply, fixing, testing and commissioning of LED 70W Street Light with Diecast Aluminium housing and IP lense with IK08, Tough-ened glass with secondary lens with IP-66 Protection. The Surge Protection should be 10KV with more than 110 lm/W complete all as specified and as directed

Supply and laying UG cable in trenches/passing through pipes/fixed on walls or poles cable XLPE insulated, screened, PVC bedded, steel strip or wire armoured electric power cables (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 4 core 10 sqmm with suitable cable gland complete all as specified and as directed

Supply and laying UG cable in trenches/passing through pipes/fixed on walls or poles cable XLPE insulated, screened, PVC bedded, steel strip or wire armoured electric power cables (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 3.5 core 25 sqmm with suitable cable gland complete all as specified and as directed

Cutting existing concrete/metal/ bituminous road/PCC hard standing / interlock tile or tile walk way any type n.exc 45 cm width and n.exc 30 cm in depth in hard strata and making good disturbed surfaces,as per the existing with cold mix bituminous material/ PCC(1:4:8) type D2 using 40mm graded stone aggregate 150 mm thick over returning filling, watering ,ramming in layers ,disposal of surplus material to a distance n.exc 50 m, complete all as specified and as directed

Supply and fix of TETRIS 9W LED bollard in rectangular shaped victorian design with opal acrylic diffuser and IP 65 protection 9W LED WW 3000K along with wiring accessories including necessry foundation with enamel white paint complete all as specified and as directed

Supply and fix LED post top lantern fitting 40 Watt with aluminium die cast housing cum heat sink with PMMA diffuser with IP 65 protection complete with necessary pcc foundation including taking down existing old pattern unserviceable light fitting complete all as specified and as directed

Supply and fix in street light TIMER control panel, pole/wall mounting made out of CRCA sheet duly powder coated with locking arrangement, incl internal wiring complete with bypass arrangements including anfle iron stand with foundation comprising of following :- (or as manufactures recommendation and design):- (a) Incomer MCB TPN 63 Amps, 240/410V- 01 Nos (b) Digital timer switch - 01 No (c) Contactor AC 3 rating, 3ph, of capacity 63 Amps - 01 No (d) ON/OFF indicating lamp - 01 Set (e) Auxilary change over switch 6 A - 01 No

Supply and fix junction box made of hot press moulded SMC junction boxes of size 140x140x95 mm GSJB-1414 including one MCB SP 6 Amps,cable connector and suitable size clamps fixing for pole/in pcc foundation and including taking down old unservicable fitting complete all as specified and as directed.

Supply and fixing in replacement 50 mm bore light grade GI pipe with all fittings laid in trenches or walls or for passing earth strip etc. complete including taking down old item complete all as specified and as directed

Material and labour in repair earthing complete with galvanized steel earth plate electrode 60cm x 60 cm x 6mm thick buried directly in ground (earth pit not less than 2.25mtr below ground level) with top edge of eath plate not less than 1.5mtr below ground level, connected to galvanized iron strip 32 x 6mm up to 7.5 RM as earthing lead by means of bolts, nuts, washers of GI or steel, including PCC (concrete chamber) shall be PCC 1:3:6 type C 1 using 20mm raided stone aggregate, with fair finish internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire gauge of (0.68mm) 8 mesh per liner inch, 80mm thick RCC pit cover 320mm x 320mm of RCC 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with XPM, JALLI and charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR part -I and specified including provision of earth wire protected by 40mm dia medium grade GI pipe and watering pipe shall be 20mm bore medium grade GI pipe, and including all excavation and earth work & connecting the earthing to an earthing test point/ transformer neutral/body/ LT panel etc. and testing on completion, complete all as specified and as directed

Material and labourfor PVC insulated copper conductor 3 core 1.5 sqmm cable to be drawn inside the pole complete all as specified and as directed

Excavation in tenches not exceeding 1.5M in depth and not exceeding 1.5M wide for laying pipes and getting out in soft/loose soil complete all as specified and as directed

Returning fitting in soil inclduing spreading, leveling , watering and well ramming in layers not exceeding 25 cm complete all as specified and as directed

Removing excavated materials not exceeding 50 Mtr depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed

Supply and laying of DWC (Double wall corrugated) pipes of size 50 mm outer dia,IS:16205(Part-24) laid in trenches for underground cable protection complete all as specified and as directed

M/s.Rejoy Constructions (BID ID -3498059)

Neptune Engineers and Builders (BID ID -3509650)

devan enterprises (BID ID -3509502)

Lucky Enterprises (BID ID -3509276)