REPAIR/ REPLACEMENT OF SEWAGE SYSTEM INCLUDING DIVERSION AND CLEANING OF SEWAGE LINES, OHTS AND DRAINS INCLUDING GENERAL MAINT AT TBRL RANGE RAMGARH

Amount

Attending day to day complaints for desludging and cleaning blockage from existing sewage line (SGSW / CI pipe 100mm/150mm bore) any depth (Work in foul position) by rodding manually,Cleaning blockage of Indian water closet (IWC) or EWC including 'P' or 'S' traps or Cleaning blockage of Floor/Nahani/Gully trap, Manholes any size for WHB, Urinals, bathroom,cook house etc internally including disposal of waste of blockage properly complete all as specified & as directed Engr-in-Charge. Note:- 1. Contractor shall deploy atleast one Safawala/ Sweeper daily. 2. All T&P for above said works and helper as & when required will be arranged by the contarctor and quoted rates shall deem to include this aspect. 3. Unit 'Per Job' includes attendance of complaintand compliance thereof taking into consideration of one building as a whole involving one or mre blockages in hat building for which measurement unit will be considered as one job. 4. Materials/fittings/fixtures requiring replacement shall be measured and paid seperately under relevant items as 'Supply only" here-in-after.

Attending day to day complaints for plumbing work for leaking of taps ,changing of tap or washers, over flow of water tanks,air chock in Gi pipe line, changing nipples , elbow ,tee, sockets (15mm or 20mm ) or any other complaint related to plumber etc complete all as specified & as directed Engr-in-Charge. Note:- Contractor shall deploy atleast one plumber daily. All T&P for above said works and helper as & when required will be arranged by the contarctor. No separate payment/wages will be paid in this regard. However, materials required shall be paid under relevant items as 'Supply only" here-in-after. Note:- 1. Contractor shall deploy atleast one plumber daily. 2. All T&P for above said works and helper as & when required will be arranged by the contarctor and quoted rates shall deem to include this aspect. 3. Unit 'Per Job' includes attendance of complaint and compliance thereof taking into consideration of one building as a whole involving one or more blockages/leakage in that building for which measurement unit will be considered as one job. 4. Materials/fittings/fixtures requiring replacement shall be measured and paid seperately under relevant items as 'Supply only" here-in-after.

Attending day to day complaints for carpenter & joinery related work for repairs of doors, windows & ventilators any type, changing & repair of iron/aluminium mongry (i.e. door closer, door stoper, handle, hinges, tower bolts, locking arrengement etc), repair of wooden cupboard, curtains rod any type & sizes, wire mesh for doors & windows or any other complaint related to carpentor & joinery etc complete all as specified & as directed. (Contractor shall employ at least 01 x Carpentor). No separate payment/wages will be issued in this regard. Note:- 1. Contractor shall deploy atleast one carpenter daily. 2. All T&P for above said works and helper as & when required will be arranged by the contarctor and quoted rates shall deem to include this aspect. 3. Unit 'Per Job' includes attendance of complaint and compliance thereof taking into consideration of one building as a whole involving one or more repairs in that building for which measurement unit will be considered as one job. 4. Materials/fittings/fixtures requiring replacement shall be measured and paid seperately under relevant items as 'Supply only" here-in-after.

Cleaning & clearing of underground sewage line upto 100mm bore pipe (including manholes by taking off manhole covers and re-fixing the same after cleaning) of any description and upto 1.5mtr depth by means of JETTING SUCTION MACHINE:- Mounted on a TATA 1109 or equivelant chasis having central storage tank having two compartment of 4000 liters for suction of sewer sludge and 2000 litres for fresh water required for jetting process all as specified and directed.

Cleaning & clearing of underground sewage line upto 300mm bore pipe (including manholes by taking off manhole covers and re-fixing the same after cleaning) of any description and upto 1.5mtr depth by means of JETTING SUCTION MACHINE:- Mounted on a TATA 1109 or equivelent vehicle chasis having central storage tank having two compartment of 4000 liters for suction of sewer sludge and 2000 litres for fresh water required for jetting process all as specified and directed.

Material & labour for cleaning of PVC water storage tanks capacity exc. 250 litres & n.exc. 500 litre, mechnised dewatering of water including sludge from the tanks, cleaning internal & external tank surfaces with high pessure water spray, vaccum cleaning, anti bactrial spray, UV radiation, spray of bleaching powder including writing date of cleaning (with thick paint in capital bold letter ) on each tank etc complete all as specified and directed by Engr-in-Charge. Note : Qouted rates shall deemed to be inclusive for (i) Opening and closing of tank cover properly before and after execution of cleaning work . (ii) Removal & refixing of float valve of any size & description before and after execution of work. (iii) Removal of sludge where directed by Engr-in-Charge. (iv) The works in respect of this item Nos 3.00 to 5.00 shall be executed within three months from the date of commencement, irrespective of period of completion / date of completion of Contract.

All as per item No. 6.00 but capacity exceeding 500 Ltrs but not exceeding 1000 Ltrs.

All as per item No. 6.00 but capacity exceeding 1000 Ltrs but not exceeding 2000 Ltrs.

Material and labour for taking out sludge from septic tank of capacity 10 users to 100 users and removing the same to a distance n.exc 50 mtr from the starting point and depositing in the pits n.exc 10 sqm on plan & n.exc 1.50 mtr depth and covered with ordinary soil and sprinkling with bleaching powder complete all as specified and directed.

All as per item serial No. 9.00 above but for manhole of any depth.

Material & labour for soakage well, in ordinary soil, foundation in PCC 1:3:6, type C-2, wells of honey combed and solid in M-25 concrete, including intercepting chamber, screen chamber brick work in cement mortar, RCC cover slab in M-25/RR masonry/filling with brick bats, complete of size 1.2m dia and 3m deep complete all as shown in drawing No. GE/RD-8 sheet 1/2 dated 17 Oct 1998 and as specified. (Note : Inlet pipe with bend as embedded in wall is including in the unit rate quoted by the contractor).

Taking out silt, gravel bounders, vegetation grass from complete chocked and blocked and fully filled up Nallah/ Culvert with revoming the silt rubbish to distance exc 150m but n.exc. 300m complete all as specified and as directed.

Dismentling of cast iron pipe jointed in cement mortar and taking out from trenches/floor/wall all as specified and directed.

Supply & fixing 75mm dia Cast iron sand cast soil, waste and vent pipes in any length with or without ears, with lead joints, laid in trenches or in floors complete all as specified and as directed.

All as per item No. 14.00 above but 100 mm dia.

Supply & fixing 100 bore branch pieces single equal or unequal ordinary or inverted (spigot or socket type) or parallel branches fixed in repair, complete all as specified and directed.

All as per item No. 16.00 above but 75 mm bore.

Supply & fixing bend (any radius) with duck's foot or heel rest 100mm bore complete all as specified and directed.

Supply & fixing cast iron floor trap with grating including jointing to waste pipe 75mm dia (out let dia ) fixed in repair.

Supply & fixing PVC tank cover for PVC water tank capacity 500 ltrs with hinges , locking arrangements etc fixing in repairs complete all as specified and as directed.

All as per item No 20.00 above but capacity of tank 1000/2000 litres.

Excavation in trenches in soft/loose soil not exceeding 1.5 metre wide or not exc. 10 Sqm on plan and not exceeding 1.5 metre deep and getting out (for sewage line and manhole etc) complete all as specified & as directed.

Material & labour PCC 1:4:8, type C-2 using 40mm graded crushed stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.

Material & labour for PCC 1:2:4, type B-1 using 20mm graded crushed stone aggregate as in benching for manholes and haunching around manhole frame for setting including use of necessary form work if any & finishing exposed surfaces smooth and even without using extra cement complete all as specified and as directed.

Returning filling including spreading in layers not exc.25 cm thick, watering and well ramming complete all as specified and directed.

Removal of surplus excavated soil to a distance not exc.50 mtr and depositing where directed at a lavel not exc. 1.5 mtr above the starting point complete all as specified and directed.

Material & labour cement concrete 1:3:6, type C2, using 40mm graded crushed stone aggregate as in concrete bed to SGSW pipes 150mm dia including packing under and haunching against the sides of SGSW pipes after they are laid and tested complete all as specified & as directed. (SGSW pipe shall be measured & paid separately). Note :- Width & thickness of PCC bed under SGSW pipe shall be all as specified in MES Schedule Part-I & II.

Material & labour for salt glazed stone ware drain pipes (Grade 'A') laid in trenches and jointed of 150 mm dia bore complete all as specified and as directed.

Material & labour for TMT bars 6 to 8mm dia, cut to length bent to shape required including cranking bending etc and binding with mild steel wire connected not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour for mild steel deformed TMT bars 10 mm dia and over cut to length bent to shape required including cranking bending spirally for hoping for columns hooking ends and binding with and including mild steel wire annealed not less than 0.90 mm dia or securing clips quality confirming to IS

Material & labour precast reinforced cement concrete 1:2:4, type B-1 using 20mm graded crushed stone aggregate as in cover slabs for manholes ,drain slabs & set in cement mortar 1:6 complete all as specified and as directed.

Material & labour for cutting into existing manholes for connecting new drains, making good to pipes and rendering cutting out existing benching or and forming branch channel in cement concrete 1:2:4 smooth finished & reforming benching as required for 150mm internal dia pipes complete all as specified and as directed.

Material & labour for extra cover cast iron pipe and fitting if lead joint is provided in line of cement joint for 100mm dia CI pipe.

All as per item No. 33.00 above but 75mm dia CI pipe.

Demolition of cement concrete(unreinforced) in ground floor and paving nexc 15cm thickness (below or above ground level) etc all as specfiied and as directed.

Dismentling floor/hearth or wall tile including cement mortar bedding (but not backing) and removing the rubbish off the premises complete all as specified and as directed.

Material and labour for 40mm thick PCC (1:2:4) type B0 using 12.5mm graded aggregate as in floor

Material & labour for non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over & including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Material & labour for vitreous china squatting pan of pattern long pan size 580X440mm white with 'P' or 'S' trap front or back intert including integral foot rest fixed in repair, complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specfiied and as directed.

Material & labour for brick work in cement mortar 1:4, using sub class 'B' bricks, straight or curved on plan, exc 6m mean radius and pointed flush as the work proceeds on external face of the wall below ground level complete all as specified.

All as per item No. 41.00 above but except bricks.

Taking down cement plaster from brick or concrete surface including hacking for key scrabbing down with water complete all as specified and as directed.

Material & labour for rendering 15mm thick in cement plaster 1:6 on fair faces of brick or concrete, finished even and smooth without using extra cement complete all as specified.

Material & labour for preparation of new plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed.

Supply only cast copper alloy chromium plated angle cock 15mm bore complete all as specified and as directed. .

Supply only cast copper alloy chromium plated stop cock 15mm bore complete all as specified and as directed.

Supply only ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed, (Minimum weight 15mm-142gms), 15mm bore, complete all as specified and as directed.

All as per item No. 48.00 above but 20mm bore (Minimum weight 20mm-210gms).

Supply only 10 Litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and as directed.

Supply only cast copper alloy chromium plated Bib taps long body fancy type 15mm bore, with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and as directed.

All as per item No. 51.00 above but short body.

All as per item No. 51.00 above but PTMT Tap (Minimum weight 15mm-90gms).

All as per item No. 51.00 above but PTMT stop cock (Minimum weight 15mm-90gms).

Supply only bib tap washers, etc.

Supply only brass chromium plated waste cupling 32/40mm bore for kitchen ,WHB ,urinals and sinks complete all as specified and as directed.

Supply only rubber PVC jumper washers for stop cock (surface of concealed) /pillar cock for 15/20mm bore complete all as specified and as directed.

Supply only rubber washer for vitreous china low level flushing cistern complete all as specified and as directed.

Supply only for sink with drainage board made out of stainless steel sheet 1.0mm thick with plug, washers and wastes, overall size 915 x 460mm, bowl size 410x330x160mm complete all as specified and as directed.

Supply only GI sockets 15mm.

Supply only GI elbow 15mm

Supply only GI tee 15mm.

Supply only GI reducer 15mm/20mm.

Supply only GI union 15mm/20mm.

Supply only GI Nipple 15mm dia 75mm long.

Supply only GI Nipple 15mm dia 100mm long.

Supply only GI Nipple 15mm dia 150mm long.

Supply only GI Nipple 20mm dia 50mm long.

Supply only GI Nipple 20mm dia 100mm long.

Supply only GI Nipple 20mm dia 150mm long.

Supply only GI elbow 20mm

Supply only GI sockets 20mm.

Supply only GI tee 20mm.

Supply only GI Hook for GI Pipe.

Supply only GI dead plug 15mm.

Supply only cement ordinary portland 43 Grade.

Supply only CP Brass chromium plated shower rose with CP arm, 15mm bore.

Supply only 200mm long Aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

All as per item No. 78.00 above but 150mm long.

Supply only 125mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

All as per item No. 80.00 above but 150mm long.

Supply only mortice lock, vertical type, size 100 mm, 4 levers brass chromium plated complete all as specified and as directed.

Supply only 15mm bore long body fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

All as per item No. 83.00 above but PTMT pillar cock fancy type (Minimum weight 15mm-120gms)

Supply only Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

Supply only Vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and as directed

Supply only PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed

Supply only PVC waste pipe 32mm/ 40mm dia complete

Supply only white cement in 01 Kg pack.

Supply only mild steel chromium plated grating 100mm dia complete all as specified and as directed

Supply only 900mm x 750mm size plate rack stainless steel with steel shelves and hanging arrangement for utensil, made out of 1mm thick stainless steel sheet complete all as specified and as directed.

Supply only wash hand basin mixer, fancy type chromium plated, 15mm bore and including all connected accessories complete all as specified and as directed.

Supply only bathing mixer, fancy type, chromium plated, 15mm bore and including connected accessories complete all as specified and as directed.

Supply only sink mixer, fancy type, chromium plated, 15mm bore and including connected accessories complete all as specified and as directed.

Supply only cast copper alloy chromium plated jet for EWC alongwith flexible pipe (minimum length 1Mtr) complete all as specified and as directed.

Supply only mild steel chromium plated soap dish complete all as specified and as directed.

Supply only brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.

Supply only harrison rails, anodised aluminium alloy with fixing brackets, stops, rollers etc.

Supply only brackets for curtain for brackets

Supply only mild steel ,300mm, ordinary rat tail rod pattern springs including roller and roller plate complete

Supply only Aluminium (extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

Supply only brass knobs 35 - 40 mm dia

Supply only hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws

Supply only 2nd class softwood moulding Sectional area exc 6 Sqmcm but n exc 13 Sqcm

Supply only 100mm butt hinges, medium weight, cold rolled mild steel

Supply only rubber beading for aluminium doors and windows

Supply only aluminium beading for aluminium doors, windows & partition work

Supply only Gypsum board 12mm thick

Supply only 140mm floor door stoppers of aluminium alloy body and tounge, anodised with hard drawn steel springs

Supply only Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm

Supply only 4mm thick Sheet glass, ordinary quality, in squares n exc 0.5 sq. m each pane.

All as per item No 112.00 above but wired glass 6.4mm thick exc 0.50 Sqm but nexc 0.75 Sqm.

Supply only glass putty.

Supply only Pre-laminated particle board 18/ 19mm thick interior grade both sides laminated

Supply only 6mm thick Veneered decorative ply wood, grade I (with BWR resin) decorative veneers on both faces

Supply only Plain head, lost head, lath, mild steel wire nails, bright finished of length 1.0 inch

All as per item No 117.00 above but length 1.5 inches

All as per item No 117.00 above but length 2.0 inches

All as per item No 117.00 above but length 3.0 inches

Supply only Mild steel wood screws, bright finished, with slotted countersunk head of size 8 X 19 mm of 100 Nos in a packet

All as per item No 121.00 above but size 8 x 35mm

All as per item No 121.00 above but size 7 x 20mm

All as per item No 121.00 above but size 5 x 20mm

Supply only PVC Rawl Plug 6mm dia (Packet of 50 Nos)

Supply only thread for plumbing work (100mtr per Roll)

Supply 250mm aluminium alloy anodized sliding door bolt with hasp, staple ( bolt type)

Supply & fixing in repairs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) capacity 500 litres, hoisted and fixed in position complete all as specified.

Supply & fixing in repairs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) capacity 1000 litres, hoisted and fixed in position complete all as specified.

Taking up or down steel tubing 15mm bore and connections, including cleaning for refixing or removal to store complete all as specified.

Taking up or down steel tubing 20mm bore and connections, including cleaning for refixing or removal to store complete all as specified.

Supply and fixing 15mm bore tubes, medium grade, galvanised, with all fittings & fixed complete to walls & ceilings or laid in floors complete all as specified.

Supply and fixing 20mm bore tubes, medium grade, galvanised, with all fittings & fixed complete to walls & ceilings or laid in floors complete all as specified.

Demoliltion of RCC in ground floor and paving n exc 15cm thickness (below or above ground level)

chaudharyconstructions1958

KUKREJA ENGINEERS

M/s Krishan Aggarwal