SPL REPAIR TO CERTAIN ROAD AND ROAD FURNITURE AT RIMC DEHRADUN

Amount

M&L for repair to pot holes any depth, not exc 1.00 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths etc, cutting around edges to at least 25 mm thick in depth, making good by applying tack coat with paving bitumen @ 5kg per 10 Sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings) depth of potholes exc 30 mm complete all as specified and directed.

M&L for preparing of black top surface by brushing with mechanical boomer for removing caked mud etc. and sweeping with mechanical boomer and finally with air compressor to remove all loose dirt etc and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer at 5 kg per 10 sqm using viscosity grade Bitumen VG-10 over black top surface complete all as specified and directed.

M&L for premix bituminous macadam consolidated thickness (75mm or less) thick with 4% binder content by weight of total mix using viscosity grade Bitumen VG-10 any penetration laid/rolled to required gradient and camber using power road roller complete all as specified and directed. Note:- Preparing surface and priming coat on bituminous macadem shall be measured and paid separately.

M&L for providing bituminous premix semi dense asphaltic concrete 30 mm consolidated thickness with 5.5% binder content by weight of total mix, using viscosity grade Bitumen VG-30 rolled with 8 to 10 tonne power roller and compacted to required camber and gradient complete all as specified and directed.

M&L for preparation of road surfaces and applying thermoplastic reflective paint in marking of minimum 2.5mm thick single coat as in centre line and edge line road marking of 150/100 mm width using 'HOT MARK' thermoplastic paint (hot application) white/ yellow by indigenous modern propelled road marking machine as directed including all ingredients such as blinder, glass beads Titanium dioxide calcium carbonate inter fillers, thermoplastic requirement for glass beads shall be the table No 800.4 of MORTH specification including spraying of glass beads etc all as per manufacture instructions complete all as specified and directed.

Supply and fixing in repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed.

S&F in repair PVC speed breaker of size 500 x 300 x 50mm/500x 400x 50 mm etc in black and yellow colour for high visibility with a load capacity of 40 to 45 tonnes complete all as specified and directed.

Supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed.

PAWAN KUMAR

Sharda Enterprises

M/S BRIJPAL SINGH MALIK

M/s MAA SHAKTI CONSTRUCTIONS AND SUPPLIERS