ADDL/ALTN TO CERTAIN OFFRS/JCOs/ORs MD ACCN AT BAREILLY

Amount

DEMOLITION AND DISMANTLING

Taking down cement plaster of any description, thickness on brick, stone, concrete surfaces including racking out joints, hacking for key, scrubbing down with water, removal of rubbish and cleaning, etc complete as directed and specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete as directed and specified.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc.Laid, bedded and pointed in any mortar complete as directed and specified.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.complete as directed and specified.

Demolition of cement concrete (un reinforced) in ground floor and paving n. exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Demolition of brick work in cement mortar including all quoins, arches, pillars etc, but excluding ashler facings, dressed stonework and precast concrete articles complete all as specified and as directed.

Taking down Chowkats or frames with shutters (without taking off shutters from the frame) exc 1.50 sqm but n.exc 4.0 sqm each and removing from site including making good disturbed portions of wall with new or old bricks, lintel, cills etc in CM 1:4 complete all as specified and directed.

Taking down Chowkats or frames with shutters (without taking off shutters from the frame) n.exc 1.50 sqm each and removing from site including making good disturbed portions of wall with new or old bricks, lintel, cills etc in CM 1:4 complete all as specified and directed.

Taking down shutter of any description exc. 1.0 Sqm but n.exc 2.0 Sqm each and removing from site complete all as specified and directed.

Taking down shutter of any description exc. 1.0 Sqm but n.exc 2.0 Sqm each and refixing in same opening with easing and adjusting complete all as specified and directed.

Dismantling of cast iron/ PVC /AC /SGSW pipes alongwith fittings and accessories 100 mm dia jointed in cement mortar and taking out of walls, floors or trenches, if required complete all as specified and directed.

Dismantling of cast iron/ PVC /AC /SGSW pipes alongwith fittings and accessories 75 mm dia jointed in cement mortar and taking out of walls, floors or trenches, if required complete all as specified and directed.

Taking up or down 15 mm steel tubing and connections complete all as specified and directed.

Taking up or down 20 mm steel tubing and connections complete all as specified and directed.

Dismantling of water tanks capacity exc 250 ltrs and n.exc 500 ltrs complete all as specified and directed.

Dismantling of water tanks capacity exc 500 ltrs and n.exc 1000 ltrs complete all as specified and directed.

Disconnecting existing 1000 ltrs capacity water tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and directed.

Disconnecting existing 500 ltrs capacity water tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and directed.

Dismantling of old barbed wire fencing complete all as specified and directed.

Dismantling of posts or struts (wood steel or RCC) any section including taking out embedded portion and making good disturbed natural ground complete all as specified and directed.

Taking down of rolling shutters of any description and any size including fittings complete all as specified and directed.

SITE CLEARANCE AND EARTH WORK

Rough excavation n.exc 1.5 m deep and getting out in hard dense soil complete all as specified and directed.

Excavating in trenches, n.exc 1.5m wide and n.exc 1.5m in depth; for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc. nexc10 sq m on plan and n exc 1.5 m in depth and getting out in hard dense soil complete all as specified and directed.

Excavating in trenches, n.exc 1.5m wide and n.exc 1.5m in depth; for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc. nexc10 sq m on plan and n exc 1.5 m in depth and getting out soft/loose soil complete all as specified and directed.

Surface dressing n exc 15 cm deep in soft/loose soil complete all as specified and directed.

Excavation in post holes (or similar holes) each not exc. 0.50 Cum, getting out, returning, filling and ramming earth or broken rubble mixed with earth around in layers not exc. 25 cm watering and removing surplus soil to a distance not exc. 50 m and making good surface as in hard / dense soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, wateringand well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated material n exc. 50m in soil and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

BLDG WORK

M&L for rendering 15mm thick on other than fair face of brick work surfaces in CM 1:4, finished fair and even without using extra cement for fixing of tile on vetical surface complete all as specified and directed.

M & L for 25 mm thick PCC 1:2:4 type B-0, using 12.5 mm graded stone aggregate as in floors, to receive surface of tile complete all as specified and directed.

M&L for screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:6, for laying floor finishes/ tiles complete all as specified and directed.

M&L for screed bed or bedding layer of mortar, 20 mm thick, in cement mortar 1:6, for laying floor finishes/ tiles complete all as specified and directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, on vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for glazed coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, on vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for virified ceramic dark shade/double charged/Ultra charged coloured tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for virified ceramic dark shade/double charged/Ultra charged coloured tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, on vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M & L for 20 - 22 mm thick machine cut pre polished kota stone slab as in flooring over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary grinding, rubbing and polishing incl full round bull nosing complete all as specified and directed.

M & L for 20-22 mm thick machine cut pre polished kota stone slab as in riser of steps, skirting in full length in single peice without joint, with groove cutting in double line of stair width laid cement screed and jointed with grey cement slurry mixed with pigment to match the shade including necessary grinding, rubbing and polishing (mirror finish) and bullnosing complete all as specified and directed.

M&L for 20-22 mm thick Granite of black colour (table rubbed and polished) as in windows cill & cooking platforms and like in cement mortar (1:4) including form work , pointing in white cment (1:2) using marble dust with admixture of pigment to match with shade of granite with full round bull nosing edging complete all as spd as directed.

M&L for 75 mm thick cement concrete 1:3:6, type C2, with using 40 mm graded stone aggregate in floor/plinth protection, finish the surface even and smooth without using extra cement including forming necessary joints 12 mm wide to the full depth of PCC at every 3 mtr and every change of direction and filling the same with bitumen filler/filler boards 1:3 by weight complete all as specified and directed.

M& L for 100 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base floor / pavings complete all as specified and directed.

M&L for sand cushioning/filling under floors or in foundation including watering and consolidation complete all as specified and directed.

M&L for cement Concrete coloured interlocking paver blocks shall be factory made with casting in rubber/pvc moulds & compacting on a vibro table assembly and shall be cured in curing tank for atleast 14 days and then air dried before use. The paver block shall be confirming to IS 15658 -2006 of 60mm thickness, M-35 Grade. Approved design, shape, size and colour of top layer complete all as specified and directed. (Make :- Nitco, Mumbai Redsun tiles, M/s Mehatab tiles)

M&L for precast machine pressesd glazed rubber moulded PCC (1:2:4) type B0 using 12.5 mm graded aggregrate cement concrete kerb stone any suitable size including weathering, slightly rounded or chemferred angles and throating , as directed edges including excavavtion for kerb stone complete all as specified and directed. (Make :- Nitco, Mumbai Redsun tiles, M/s Mehatab tiles)

M&L for reinforced cement concrete 1:1.5:3 type A-1 (using 20mm graded stone aggregate) (nominal mix) as in slabs supported on wall, landing, balconies, canopies, deck slabs and in shelves and like including bonding agent, complete all as specified and directed. Note:- Reinforcement to be measured & paid under respective items.

M&L for form work to chullah hoods, chajjas, troughs and similar items including edges for rough finished surfaces of concrete flat, complete all as specified and directed.

M & L for form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for rough finished surfaces of concrete complete all as specified and directed.

M&L for TMT Bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L for PCC (1:2:4) type B-0 using 10/12.5 mm graded stone aggregrate laid over roof slab after applying cement slurry for filling undulationations finished even and smooth without using extra cement complete all as spd and directed.

M & L for applying cement slurry over existing roof surface @ 3 Kg/Sqm incl mix with water proofing liquid @ 0.15 ltr per 50 kg cement bags as per manufactures instructions complete all as specified and directed.

M&L for screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:4, over RCC roof slabs for laying water proofing treatment mixed with using water proofing liquid @ 150 ml per bag of cement complete all as specified and directed. Note:- Water proofing liquid shall be measured and paid separately.

M & L for cool roof antislip tiles 300x300x10 mm with high SRI value not less than 90 laid over existing treatment on accessible roof and including 15mm thick screed bed in CM 1:4 complete all as specified and directed. (Make: Johnson, Nitco, Orient bell, Kajaria)

Supply only liquid water proofing compounding complete all as specified and directed.

M&L for PCC 1:5:10 type E-2 (40 mm broken brick aggregates) as in sunken sub base of floor fillings complete all as specified and directed.

S&F for 32mm dia GI pipe, medium grade as in spout pipe in sunken floor complete all as specified and directed.

M&L for brick work with old size fly ash bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar 1:6 to on brick masonary wall surfaces or on other than fair faces of brick masonary finished even and fair without using extra cement complete all as specified and directed.

M & L for 15 mm thick rendering in two layers on fair faces of brick work or concrete surfaces first layers 10 mm thick with cement mortar 1:6 on fair faces of brick work or concrete surfaces and second layers 5 mm thick with cement mortar 1:4 with mixing of water proofing compound as per manufacturer’s instructions complete all as specified and directed. Note:- Water Proofing compound shall be measured and paid seprately.

Supply only Integral water proofing compound complete all as specified and direcetd.

M&L for rendering 5 mm thick in CM 1:3 as on concerete surface on ceilings finished even and smooth without using extra cement complete all as specified and directed.

torching overlaps with a propane or a butane gas torch, with a overlap of 100 mm and sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer’s instructions complete incl removal of existing treatment all as specified and as directed. Note: (i) Coved fillets in PCC(1:2:4) type B-0 using 12.5mm graded stone aggregate with using Dr fixit pidilite LW(+) , of radius 75mm shall be provided at the junction of roof and parapet wall/mumty/chimney/other vertical surfaces and thereafter surface painted with hot paving bitumen of Grade 85/25 confirming to IS-73, [email protected] Kg/Sqm over a coat of bituminous primer confirming to IS-3384 applied @ 0.30 Kg/Sqm

(ii) Polymeric membrane shall be taken to a height of 45cm (minimum) and then inserted inside the groove of parapet wall of brick masonry and shall be finished by a membrane flushing. (iii) The waterproofing treatment shall be got carried out by the manufacturer or their authorized applicators. (iv) In case of stone masonry parapet wall etc a groove of size 25mmx25mm(minimuim) shall be made in coved fillet at the junction of roof and parapet wall/mumty Chimny/other vertical surfaces and polimeric membrane insterted in groove and sealed with paving bitumen (v) Exposed surfaces of APP membrane shall be applied with two coat of bituminous aluminium paint @ 150 ml/Sqm. (vi) Above aspects are deemed to be included in quoted rate.

All as per item No 67,67.01 & 67.02 above -ditto- but except aluminium paint complete all as specified and as directed.

black finish reinforced with non-woven polyester matt, with a thermo fusable finish laid over compatible bitumen primer (Bitumen primer shall be TANK MASTIC of M/S STP Ltd or ‘EMW FLATE’ of M/S Texas India Ltd/ Dr fixit/ M/S IWL ltd} at the rate of 0.40 Kg/Sqm torching overlaps with a propane or a butane gas torch, with a overlap of 75mm at the sides and 100mm at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer's instructions including preparation of surface by removing the existing treatment, complete all as specified an as directed

Note :- (i) Polymeric membrane shall be laid in sunken floor and on sides up to finished floor level. (ii) The waterproofing treatment shall be got carried out by the manufacturer or their authorised applicators. (iii) Above aspects are deemed to be included in quoted rate. (iv) Supply only water proofing liquid shall be measured and paid seperately

S & F in repair for 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints,complete all as spd as directed.

S&F for 40 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed .

S&F for 35mm thick factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles(Hollock), prepared to receive glass/gauge etc without sash bars, edges of framing plain cham-fered or rounded, mitred and rebated sash bars, any numbers The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed. Note :- Glass/gauge shall be measured and paid for separately.

S&F for 18 mm thick termite resistant and water proof, both side prelaminated wooden plywood one side with decorative choice lamination, and other side plain white lamination total thickness not more than 22 mm thick, as in cup board shutters, with wardrobe/ finch lock & PVC lipping on all exposed edges of same texture and shade, with complete all as specified as directed. Note: 1) Design & layout of wardrobe and pattern / colour of lamination to be approved by GE. 2) thickness of laminated not less than 1mm for inside plain white type & 1.5 mm for outer decorative type. The laminate shall be fixed to base with approved adhesive as per manufacturer's instructions and machine pressed to ensure proper bonding with base ply and avoid air pockets. 3) Frame to be fixed to walls, soffits & base of cupboard with fasterners.

S&F for 12 mm thick termite resistant and water proof , both side prelaminated wooden plywood both side plain white lamination , total thickness not more than 15 mm , as in cupboard shelves & partitions including powder coated aluminium cleat (colour of powder coated to match colour / shade of laminate) and as in fixing to sides of cupboard, soffits & base of cupboard with SS fastner also including PVC lipping on all exposed edges of same texture & shade to match the laminate complete all as specified as directed. Note: 1) Design & layout of wardrobe and pattern / colour of lamination to be approved by GE. 2) Thickness of laminated not less than 1mm for inside plain white type. The laminate shall be fixed to base with approved adhesive as per manufacturer's instructions and machine pressed to ensure proper bonding with base ply and avoid air pockets .

S&F for 9 mm thick termite resistant one side prelaminated wooden plywood with plain white lamination, fixed on back side of wall of cup board with SS fastners complete all as specified as directed.

S&F for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, in opening as per specification & drawing complete all as specfied and directed. Note:- Colour of PVC sheet to match that of shutters.

S&F 30 mm thick factory made both side Prelaminated PVC sheet (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, in the frame at site as per specification & drawing complete all as specfied and directed.

S&F for mild steel window grills box type framed work as in window guard bars, grills or forged into spikes, framed balusters, walkway railing and similar work including welding, FE-290 grade E-165 complete all as specfied and directed.

S&F for steel windows, ventelators confirming to IS-1038 with side hung shutters including box type hinges with steel handle, 2 Nos 100mm MS tower bolt over MS flats iron on each openable leaf and Z section handle and steel peg stay complete without glazing bars, dovetailed or welded including a shop coat of red oxide zinc chrome primer complete all as specified and directed.

S&F for steel windows, ventelators confirming to IS-1038 with side hung shutters including box type hinges with steel handle, 2 Nos 100mm MS tower bolt over MS flats iron on each openable leaf and Z section handle and steel peg stay complete with glazing bars, dovetailed or welded including a shop coat of red oxide zinc chrome primer complete all as specified and directed.

S&F for steel ventilator fixed type with glazing bars complete welded including a shop coat of red oxide zinc chrome primer complete all as specified and as directed. Note: Glass shall be measured and paid seperately.

M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exc. 0.5 Sqm in each pane complete all specified and as directed.

M&L for 3mm thick sheet glass frosted quality and glazing with oil putty or wooden beads in squares not exc. 0.5 Sqm in each pane complete all specified and as directed.

S&F powder coated aluminium sliding windows frame with movable shutter ( sliding on minimum two PVC roller of best quality) for each shutter on three tracks with stainless steel mosquito proofing and glazing shutter and incl 5.50 mm thick glass & stainless steel wire mesh fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below- (i) Window frame :68.4x38mm X 1.15 mm thick for three tracks. (ii) Top/bottom rail and style / rail of shutter : 15x37.5x1.15 mm thick and over

(iii) Aluminium beading - 0.7mm thick (iv) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium wire staples complete. (v) Aluminium fittings such aluminium suitable handle with auto interlock cap with suitable size . (vi) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed.

S&F powder coated aluminium sliding windows and frame with movable shutter ( sliding on minimum two PVC roller of best quality) on two tracks Aluminium composite panel shutter fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below- (i) Window frame :45.2x35mm X 1.15 mm thick for two tracks. (ii) Top/bottom rail and style / rail of shutter : 15x37.5x1.15 mm thick and over.

(iii) Aluminium beading - 0.7mm thick (iv) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium wire staples complete. (v) Aluminium fittings such aluminium suitable handle with auto interlock cap with suitable size . (vi) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed.

S&F Powder coated aluminium ventilators box type with louvers & wire mesh fixed with neoprene rubber gasket, aluminium beading, clips. Frame made with powder coated aluminium section of size as appended below (i) frame :45.2mm x35mm X 1.15 mm (ii) Aluminium beading - 0.7mm thick (iii) Glass louvers depth 6 inch. Blade Angle: 38 degrees and thickness of blade 2.02 mm with 106.25 mm spacing. (iv) Aluminium neccessary fittings complete as required. (v) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed.

S & F for aluminium powder coated frame hollow sections members of size 63.50 mm x38mmx 1.48 mm thick fixed with 3 mm thick aluminium composite panel into the wall for kithen cabinet/ cupboard shelf with aluminium clip/strips/beadings with rubber gasket, design as per site requirements basis, complete all neccessary fitting complete all as specified and directed

S&F for Stainless Steel (AISI 304 grade ) non magnetic multilayer nickel chrome plated for multipurpose utensils container including frame work , telescopic channels , handles etc as reqd & complete all as specified and as directed, utensils sample , design & pattern of each basket to be approved by GE of following size in each kitchen :- (a) plain basket of size 510x470x100mm or 520x485x100 mm or 486X500X100mm -01Nos Make:-Sleek Elnora(Asian Paint) code 600, size 530x505x150mm/ Godrej Code 6126 baan code LKY2PB214/Evershine size 520x485x90mm (b) multi size plate basket of size 510x470x150mm or 520x485x150 mm or 436 x 500 x200 mm (clear depth 500 mm) -01 Nos. Make:- Sleek Elnora (Asian Paint) code 600, size 530x505x100)mm/ Godrej product code 6159, baan code LKY3CS214/Evershine size 520x485x90mm

(c) cutlery basket,with perforated bottom & side of compacted /slots for holding cutlery of size 510x470x100mm or 520x485x100 mm or 144x 468 x50mm ( clear depth 500 mm) -01Nos Make:- Sleek Elnora ( Asian Paint) Code 600, size 530x505x100 mm/ Godrej product code 6134 baan code LKY2PC214/Evershine size 520x485x95mm (d) Plain basket of size 510x470x200mm or 520x485x200 mm or 486x500x200 mm -02 Nos, Make:-Sleek Elnora(Asian paint) Code 600, size 530x505x200 mm/Godrej product code 6128, baan code LKY2PB218 /Evershine size 520x485x180 mm (e) Pull out with 02 baskets each of size 150x485x80mm or 100x485x80 mm -01 Nos Make:- Sleek Elnora (Asian paint) code 250 size 180x500x590mm/Godrej product code No 6141,Baan code LKYNS2SP6/ Evershine size 610x485x90 mm (f) Dust bin as required -01 Nos Make:- 200 series of Hettich order No 9210444)/Sleek Elnora (Asian Paint) elnora grade SS 304/Evershine size 250x 145 mm (g) Telescopic channels, handels etc as required complete all as specified and as directed. Make:- Hettich cat No KA 4620 /Kaff code No SKU BTP 20/Godrej soft closing drawn channel 500(20'' product code-7087, Ban code LKYGTSC20/Evershine telescopic channel 20'zinc Code- HICH1359 as reqd incl frame work handles etc as reqd & all as spd, sample & design as approved by GE. Note:- Sample and design to be approved by GE.

S & F 150 mm long floor door stopper of brass body and tongue, with hard drawn steel spring fixed on door complete all specified and as directed.

S & F magnet catch with striking plate including letting in complete all specified and as directed.

S&F 200 mm long Stainless Steel glossy finish handles with SS screw, complete all as specified and as directed.

S & F 300 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all specified and as directed.

S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all specified and as directed.

S&F 150mm size aluminium handles, cast type anodised completed all as specified and directed.

S&F stainless steel butt hinges 100mm size cold rolled medium weight and fixed complete all as specified and directed.

S&F 300mm size ordinary mild steel , rat tailed rod pattern spring including roller and roller plate welded to mild steel frame.fixed in repair completed all as specified and directed.

S&F 300 mm long aluminium sliding door bolts plate type with bright bolt not less than 16 mm dia with and including a minimum of 6 bolts and nuts, 04 Nos on bolt plate and 02 Nos on staple plate and fix complete all as specified and directed.

S&F 18 mm thick imported pine wooden medium density fibre board fixed with frame including hold fast (as in shutter incl knob in each shutter) etc including magnet catcher built in cup board with all necessary fittings complete all as specified and directed.

S & F hydraulic concealed hinge with clip on installation and integrated Silent System, opening angle not less than 100º, For shutter thickness 15 - 24 mm full overlay type shutters, hinge cup dia 35 mm including necessary fixing arrangement with SS screw complete all as specified & directed. Make: Hettich cat No Onsys 4447i product code 928143200 /Kaff nickel plated SC hinge 100°code No KHSC-0/Godrej product code :6933, Baan code LKYAHCHR4

S & F glossy finished SS 125 mm hasp and staple including bolt to hinge plate and fixed with S S screws complete all as specified and directed.

S & F for stainless steel glossy finish hat peg set of five tier with necessary fitting complete all as specified and directed.

S&F stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

S&F 1000 litre ISI marked rotational moulded tripple layer polyethlene water storage tanks white colour (cylindrical vertical with closed top) and suitable size of MS tasla with locking system hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S&F 500 litre ISI marked rotational moulded tripple layer polyethlene water storage tanks white colour (cylindrical vertical with closed top) and suitable size of MS tasla with locking system hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F GI tubing of 15 mm dia, medium grade with all fittings and fixed to walls or ceiling (concealed) or laid in floors complete all as specified and directed.

S&F GI tubing of 20 mm dia, medium grade with all fittings and fixed to walls or ceiling (concealed) or laid in floors complete all as specified and directed.

S&F vitreous China corner wash hand basin, size as per manufacturer any design approved by GE including 15mm dia pillar tap, CP brass waste coupling, 450 mm long HDPE PVC connection, 750 mm long 32mm bore HDPE waste down pipe including CI brackets complete all as specified and directed. Model : Cat No 10035 of Hindware , Parryware Cat No C 0408 , Cera Cat No S 2020139

S&F in repairs vitreous chinaware coloured wash hand basin with pedestal of size 55X45X82cm complete including fancy CP pillar tap, CP brass waste coupling ,waste pipe including fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed. Model : WHB - Cat No 10072, Pedestal- Cat No. Ped 11029 Neptune of Hindware ,Parryware Cat No C0480 (SP) 181/CTH ,C 0375 pedestral, Cera Cat No 2090107Ped , Cat No S 2040112 WHB

S&F in Vitreous China table top wash basin of suitable size including SS bottle trap, HDPE waste pipe including fixing on counter with SS waste coupling complete all as specified and as directed. Model : Cat No 91072 Orchid of Hindware , Parryware Cat No C0483, Cera Cat No FLS-WHT-0575

S&F in repairs brass chromium plated wall mixer 3 in 1, 15mm for mixing hot & cold water screwd down three joints to steel pipes or unions and plugging and screwed to walls complete all as specified and as directed. Model : Cat No FUS-29281 Fusion of Jaquar ,model of Hindware Cat No F390022, Parryware Cat No G0217A1

S&F in repairs Brass chromium plated wall mixer 2 in 1 , 15mm for mixing hot & cold water screwed down three joints to steel pipes or unions and plugging and screwed to walls complete all as specified and directed. Model : Cat No FUS - 29273 UPR of Jaquar , Hindware Cat No F390020 , Parryware Cat No G0216A1

S&F in repair fancy type 15mm dia chromium plated fancy type wall mixer hot & cold with long swan for kitchen sink fixing and connection to pipes complete all as specified and as directed.

S&F in repair fancy type brass chromium plated toilet paper holder, complete all as specified and as directed. Model No :- ACN-1153N Jaquar, Hindware model No F 880003, Parryware model No T6514A1

S & F in repair fancy type 150mm size square brass CP shower rose with or without swivel joints complete all as specified and as directed. Model No: F 7010305 of Cera , Hindware Model No F160006 , Parryware Model No T9985 A1

S&F in repair 15 mm dia bib tap fancy type chromium plated with flange quarter turn complete all as specified and directed. Model : FUS 29037 Fusion of Jaquar, Parryware model No G2304A1, Cera model No F1014151

S&F in repair 15 mm dia bib tap cast copper alloy with crutch or butterfly handle, screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F in repair fancy type 15 mm bore brass chromium plated mixer for mixing hot and cold water screwed down for iron pipe and fixed to WHB including taking out existing mixer from old WHB complete all as specified and directed. Model :ARI 39001B Aria of Jaquar ,Hindware Model No F280010 SCP, Cera Model No F2013451

S&F in repair 15 mm dia two way bib cock with wall flange fancy type chromium plated complete all as specified and directed. Model: FUS 29041 Fusion of Jaquar ,Parryware model No G2381A1, Cera model No F1014161

S&F stainless steel of AE- SI 316 grade tubular towel ring including a pair of CP brass bracket complete all as specified and directed. Model No ACN 1121N Jaquar, Parryware Model No T/6002A1, Cera Model No F5002105

S&F in repair 15 mm dia bore PVC connection with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repair fancy type brass chromium plated soap dish of 160x160x90 mm complete all as specified and directed.

S&F in repair fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified and directed. Model : ARI -39053 of Jaquar,Hindware Model No F320006, Parryware Model No G4907A1

S&F in repair fancy type stainless steel towel rack size 600mm long including a pair of brass bracket complete all as specified and directed. Model No :- ACN -1181N of Jaguar ,Parryware Model No T6008A1, Cera Model No F5003102

S&F chromium plated brass tubular towel rail 20 mm dia, D type 60cm long between flanges complete all as specified and directed.

S & F in repair fancy type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP bracket gaurd and railling 60 cm long complete all as specified and directed. Model: ACN - 1171N of Jaquar, model No F-5005301 of CERA, Parryware model No T6009A1

S&F in repair fancy type glass corner 300mm radius of 10mm thick toughned glass with CP railing fixed with fancy type screws complete all as specified and directed. Model: ACN - 1173 of Jaquar , Parryware Model No T6010A1, Cera Model No F505101

S & F in repair of 20 mm bore gunmetal globe or gate valve, with iron wheel head, screwed both ends for iron pipe omplete all as specified and directed.

S&F in repair vitreous china squatting pan of orrissa pattern long pan size 580 x 440 mm white with "P"or "S" trap size 100 mm dia front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete bedding (1:2:5), minimum 150mm all round and finish just below level of rim of pan complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) with 'P' or 'S' trap white, including connection to drain or out going pipe and flush pipe anti symphonize pipes etc complete all as specified and directed. Model :- CNS-WHT-WH-10(seat), CNS-WHT-WCN1 (seat cover) Jaquar , Parryware Model C 0297(seat) & E-8071 (seat cover), Cera Model NO S1050101(seat) & B-1510119( seat cover)

S&F in repair PVC low level flushing cistern 10 litres, valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flushing pipe complete all as specified and directed. Model :- Sleek fresh dual flush of Hindware Model No Pastel size 47.6x15.5x32 , Parryware Cat No 8177*, Cera Cat No B1810110 fittings snow white

S & F 15mm dia brass chromium plated health faucet with 1.00 mtr long flexible tube and wall hook screwed for iron pipe fancy type long body and hanging arrangement complete all as specified and directed. Model :- ALD 573 of Jaquar ,Hindware Model No F160002, Parryware Model No T9961A1

S & F Brass CP Hand Shower with 15mm Dia 1.2 Meter long flexible tube and wall hook screwecd for iron pipe fancy type long body complete all as specified and directed. Model No :- HSH-1931 of Jaquar , Hindware Model No F160053, Parryware Model No T9982A1

S&F in repair PVC (SWR) multi floor trap with grating including jointing with solvent cement floor trap 75 mm dia outlet plain including jointing to waste pipe fixed in cement concrete (1:2:4), type B-1 complete all as specified and as directed.

S&F in repair PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fitting complete all as specified and as directed.

S&F in repair PVC (SWR) 110 mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fitting complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F PVC (SWR) 75 mm bore junction single (Single 'T') equal or unequal with access door complete all as specified and as directed.

S&F PVC (SWR) 110 mm bore junction single (Single 'T') equal or unequal with access door complete all as specified and as directed.

S & F PTMT alloy toilet cabinet with mirror of overall size 350 x 450mm and fixed to wall complete all as specified and as directed. (Cat Part No. 551 of Make Prayag or equivalent model)

S&F in repair stainless steel plate rack of size 90 cm x 80 cm x 25 cm made with 1 mm thick sheet including taking out existing wooden plate rack complete all as specified and as direcetd.

S&F for 0.8 mm thick stainless steel kitchen sink size 590x460x230mm undermount, single bowl (bowl size 540x410x230 mm) , incl waste pipe & SS coupling, washers etc complete all as specified and as directed . Model :- Cera Cat No B 4711501- satin finish series alma , Parryware Cat No C857281, Kaff Cat No KS610SB (R10) Marco series.

S & F for 0.8 mm thick stainless steel in graceful glory range ,anti scratch, satin finish of popular range kitchen sink over all size 990x459mm , double bowl size 400x340xx200 mm incl waste pipe & SS coupling, washers etc. complete all necessary fittings all as specified and as directed. Model :- Parryware Cat No C 857081, Cera Cat No B 4513201,Kaff Cat No KS610 SB (R10)

S&F in repair 20 mm dia SS 1.0 mm thick fancy type droppery rod with decorative design matching brackets as approved and knobs (lattu) or end bracket as required incl fitting with 80 mm long SS screw with 75 mm long wooden gitty of appropriate size in each end & intermediate support complete all as specified and directed.

M&L for Powder coated M S letter boxes with flinch/key lock size of size 250 x112.5x 325 (LxHxD) mm made out of 20 guage MS sheet premium quality material, designed in adherence with defined industry standards including necessary fixing arrangements complete approved by GE complete all as specified and directed.

M&L for providing & injecting chemical for post construction ATT along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in a portion with cement mortar (1:2) to match the existing apron complete all as specified and as directed.

M & L for post construction anti-termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and as directed.

M & L for post construction anti-termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor soil complete all as specified and as directed.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade Fe-410 gde st- 240 complete all as specified and directed.

M&L for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M & L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, Chajja ( up to IInd floor) etc making good, cutting exc 10cm and not exc 20cm girth in brick walls complete all as specified and as directed.

Dismantling of concrete by chiseling from RCC members like column , beam, parapet facia, chajja, ceiling,etc exposing the reinforcement without disturbing the reinforcement free from rust by sand blasting/ using chemical, apply a coat of rustolin to remove rust and acralic polymer on old rusted reinforcement and providing at places additional reinforcement welding with existing reinforcement as directed wherever required binding RCC 50 mmx50 mm (10 mm gauge welded mesh ) & tack, securing with clips / blinding wire, welding and contd...

Provision guniting pressure 2.2 to 2.5 kg /sqm with admixer 1 cement 3.5 of sand of thickness 25 to 40 mm including stripping floating with wooden strippers for proper dimension control neccssary form work & scaffolding up to three storey and including height of head room complete surface of guniting to be finished fair with 10 mm thick plaster in cement mortar 1:4 with water proofing compound @3% by weight of cement and recron 3 S as per manufacturer instruction cleaning & removing of waste meterial etc as dirply two coat of Dr fixit /pidilite new coat ezee at interval of 8 hours cure for the surfaces complete all as spd as directed.

M&L for preparation of newly or previously untreated steel surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new or previously untreated wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old steel surfaces of any description over 10cm width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying three coats of white wash on walls complete all as specified and directed.

M&L for complete removal of existing treatment and applying of two coat OBD on wall with airless electric sprayers over a coat of primer applied using airless electric sprayers over two coats of wall care putty (Asian product code - 0079 or JK wall care putty / Birla white wall care putty) of 1-1.5 mm thickness prepared and sanded with electrically operated sanding machine. Application to be done through the authorised applicator of manufacturer complete all as specified and directed. Make : Royale luxary emulsion shyne distemper of Asian paint, Nerolac beauty acrylic distemper, Berger bison acrylic distemper

M&L for two coat OBD on newly plastered wall surface with airless electric sprayers over a coat of primer applied using airless electric sprayers over over two coats of wall care putty (Asian product code - 0079 or JK wall care putty / Birla white wall care putty) of 1-1.5 mm thickness prepared and sanded with electrically operated sanding machine. Application to be done through the authorised applicator of manufacturer complete all as specified and directed . Make : Royale luxary emulsion shyne distemper of Asian paint, Nerolac beauty acrylic distemper, Berger bison acrylic distemper

M&L for preparation of newly plastered walls surfaces and applying two coats of cement base paint over a coat of 1mm thick wall care putty complete all as specified and directed.

M&L for complete removal of existing treatment on walls, etc including cleaning of any mortar drops, fungus efflorescent salts etc and preparation of old plastered surfaces and applying two coats of cement base paint over a coat of 1 mm thick wall care putty complete all as specified and directed.

M&L for two coats of black bituminous paint on surfaces of any description wood, concrete and brick etc complete all as specified and directed .

M&L for preparing newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.

M&L for complete removal of existing treatment on ceiling, etc including cleaning of any mortar drops, fungus efflorescent salts etc and preparation of old plastered surfaces and applying two coats of white wash complete all as specified and directed.

M&L for complete removal of existing treatment and applying of two coat OBD on ceiling with airless electric sprayers over a coat of primer applied using airless electric sprayers over a coat of wall care putty (Asian product code - 0079 or JK wall care putty / Birla white wall care putty) of 1 mm thickness prepared and sanded with electrically operated sanding machine. Application to be done through the authorised applicator of manufacturer complete all as specified and directed. Make : Royale luxary emulsion shyne distemper of Asian paint, Nerolac beauty acrylic distemper, Berger bison acrylic distemper

S&F 0.71 mm thick aluminium plain sheeting alloy 31000 H4, STUCCO embossed finish with fixed with coach screw and aluminium washer in roof and wall etc with end laps stitched with 25x6 mm GI bolts at 20 cm apart gap to be with thermocol sheet including dismantled also complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

S&F 1.25 mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete including cutting out of existing sheet if required complete all as specified and directed.

Supply & fixing factory made WPC double door frame 100% Solid (wood polymer composite) Size 125mm x 65 mm double Rebated ,made from wpc material comparising of virign PVC polymer of K value 58-60 (suspension grade ) calcium corbonate and natural fibers ( wood powder/rice husk /wheat husk) minimum compressive strength of 58 N/mm2, moduus of elasticity 900N/mm2 and resistance to spread of flame of class 'A' category with property of being termite / borer proof, water / moisture proof & fire retardant & fixed in postion with SS dash fasterns / hold fast of required dia and length,colour of door frame to match that of shutter all as per specifications drawings complete all as specified and directed. Make : M/S Kumar tech , M/s Raj shree & M/s syntex

Supply & fixing 30mm thick prelaminated WPC factory made moulded door shutter consisting of solid core single leaf flush door of 25mm thickness, lipped with 15mm (5mmx3) thick x 30mm width on one stiles and top rails & 10mm (5mm x 2) thick x 30mm width on the other stiles & bottom rails, The inner panel laminated with 2mm thick termite proof, water proof and fire resistant moulded PVC sheet with 2,4,6 raised panel design in different plain and / or prelam colour on one side after routing the moulded design on flush door & 2mm plain and / prelam PVC sheet on other side using rubber based adhesive on flush door & solvent cement adhesive on the lipping etc. colour / pattern of laminate to be approved by GE complete all as specified and as directed. Make : M/S Kumar tech , M/s Raj shree & M/s syntex

Supply & fixing 30mm thick factory made wire mesh PVC door shutter consisting of frame made out of 19 guage thickness and size of 19mm x 19mm for stiles and 15mm x 15mm for top, lock & bottom rail. MS Frame shall have a coat of metal M.S tube manufacture 19mm x 19mm MS Square tubes shall be covered with heat moulded plain sheet 'C' channel made from 5mm thick PVC sheet of density 600 kg manufactured by and ISO-9001 2015 certified company f size 30mm thickness, 90mm width of which 75mm shall be flat and 15mm shall be bent in 90* angle on either side forming stles, Contd....

one of the 90* bend dge is cut from stiles as rails to nail from inner side of door to hide wiremash fixing steel screws 5mm thick 115mm wide PVC sheet out of which 100mm shall be bent in 90* on the inner side to form top and bottom rails and 130mm wide PVC sheet out of which 100mm shall be flat and 15mm be bent in 90* on both to form lock rail. An additional 5mm thick PVC strip of 20 mm width is to be stuck on the interior side of the channel using PVC solvent cement adhesive. Panel will be of GI/SS wire mesh of 24 guage to tbe fitted inside area of stiles & rails. Contd....

Panel will be of stainless steel wire cloth, 0.56 mm nominal dia of wire and average with of aperture 1.18 mm incl powder coated aluminum grills fixing grills with opening 69.4mm X 78.2mm grills thickness shall be of 6.4mm X 5.8mm having weight not less than 2.306 Kg/per sqm shape as ordered with frame channel of 34 X 11mm X1.7mm thick fixed with screw inside of the PVC shutter to be fitted inside area of stiles & rails.. The wire mesh in top, bottom & lock rail is sealed with 15mm x 15mm tube with steel screw of size 13/6mm 10mm (5mm x 2nos) thick PVC of 25mm width is to be stuck & nail on both side of G.I wire mesh interor at the top, bottom & lock rail. 10mm thick (5mm x 2nos) thick 20mm wide cross PVC sheet as gap insert for top rails & bottom rail door to be fixed to frame with 3 nos. MS power coated butt hinges size 100mm x 25mm x 2mm and 32mm long steel screw drilled suitable to pass through both the walls of the M.S tube other harwares should be fixed with 19*6mm size steel screws etc. colour / pattern of laminate to be approved by GE complete all as specified and directed. Make: M/S Kumar tech/ M/s Raj shree/ M/s syntex

SEWAGE DISPOSAL

M & L for providing plain cement concrete type D-2, 1:4:8, (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L for concrete (1:3:6 type C2) bed to drain pipes for 150 mm including packing under, and haunching against the sides of pipes after they are laid and tested including all necessary shuttering and supports to concrete and for laying beds to falls.complete all as specified and directed.

M&L PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in coping, bed blocks and like including necessary form work complete all as specified and directed.

S&F 150mm bore reinforced concrete pipes,class NP-2,laid in trenches and jointed with collars in cement and sand mortar 1:1 (Note:-Excavation & earth work shall be measured separately) complete all as specified and directed.

M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work n.exc. 200 mm thick (Horizontal or sloping) complete all as specified and directed.

M & L formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizintal or sloping and similar work exc 10cm but n exc 20cm wide with fair finished surfaces complete all as specified and directed.

M&L for re-inforced cement concrete (nominal mix) type B1 (1:2:4) using (20mm graded stone aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs andd in shelves and the like complete all as specified and directed.

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces (inside of manhole) in CM 1:4 mixed with WPC @ 3% by weight of cement including finishing the surface even and smooth without using extra cement complete all as specified and directed. Note- WPC shall be measured and paid separately as supply only.

M&L rendering 10 mm thick fair faces of brick work or concrete surfaces of external (outside of manhole, upto 150 mm below GL ) in CM 1:4 including finishing the surface even and fair complete all as specified and directed.

FENCING AND GATE

S&F M S Posts and struts in fencing (angle of size 65x65x6) mm including cutting tops to shapes as directed including driling holes for bolting of MS flat iron in horizontal, vertical & diagnal faces of each pannel to be intertwined with Chainlink fencing, and fixed to posts with MS nut bolts and washers including all necessary drilling bolting etc, and similar work confirming to Fe 290 Gde E-165 complete all as specified and directed.

M & L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation,filling in and mass concrete complete all as specified and directed.

M&L for PCC 1:2:4 type B-2 (using 40 mm graded stone aggregrate) mass concrete as in embadded 15 cm below , below up to 200 mm from above GL ( from work paid seperately ) for fixing chain link fencing complete all as specified and directed.

Supply only Chain link MS galvanisd fencing, (IS-272) 75x75 mm mesh GI wire (Minimum dia 4mm and weight of mesh n.exc 4.0 kg/sqm) made up into mattresses or cages etc complete all as specified and directed.

Fixing only chain link fencing weight n.exc 4.0 kg/sqm including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

M & L form work to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter rough finished surface complete all as specified and directed.

M & L mild steel bolts. purpose made.with hexagonal orsquare head one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut. exc 10 cm but not exc 15 cm and 15mm dia complete all as specified and directed.

INTERNAL ELECTRIFICATION

Taking down carefully copper/aluminium point wiring light, fan, socket or power point complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings, bell push, bell buzzer etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

Taking down sub main wiring of any size/capacity complete all as specified and making good disturbed sufaces to match with the existing surfaces complete all as specified and directed.

Taking down unserviceable main switch, DBs with MCBs any size and capacity including making good disturbed surface of wall complete all as specified and directed.

Taking down and disconnecting electric meter and depositing to MES store yard for keeping in safe custody complete all as specified and directed.

Taking down and disconnecting water heater storage type (Geyser) and depositing to MES store yard for keeping in safe custody complete all as specified and directed.

Taking down and disconnecting ceiling/ exhaust fan and depositing to MES store yard for keeping in safe custody complete all as specified and directed.

Taking down and disconnecting light fittings and depositing to MES store yard for keeping in safe custody complete all as specified and directed.

M & L for point wiring using 1.50 sqmm size, PVC insulated, unsheathed 1100 volts grade single core multi-stranded (FRLS) copper conductor cable in proper colour coding drawn into and including non metallic rigid PVC conduit medium grade (not less than 20 mm dia) with and including its all necessary fittings and accessories fixed concealed, sunk cast iron or 1.6 mm thick pressed steel terminal box for mounting fittings i.e, normal piano switch / sockets incl cover plate with frame and covered with 3 mm thick white bakelite / laminated hard glossy surface sheet top cover fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.50 sqmm size stranded FRLS copper conductor cable as in earth wire and connecting all metal parts to common earth dolly incl cutting and chases pinning in for concealed conduit wiring and making good of disturbed surface complete all as specified and directed for the following: -

One light point / bell point/exhaust fan point / fan point controlled by one, one way switch 5/6 Amperes single pole.

one light point controlled by two, two way switche 5 Amps single pole.

One 3 pin 5 amp socket out let point controlled by one switch on the same board

One 3 pin 5 amps socket out let point on independent board

M & L power point wiring of copper cable FRLS grade,multi stranded 2.5 Sqmm size for 15 Amps socket outlet on independent board with 2.5 Sqmm size of copper cable FRLS grade,multi stranded earth conductor cable in proper colour coding drawn into and including non metallic rigid PVC conduit medium grade (not less than 20 mm dia) with and including its all necessary fittings and accessories fixed concealed, sunk cast iron or 1.6 mm thick pressed steel terminal box for mounting fittings i.e, normal piano switch / sockets incl cover plate with frame and covered with 3 mm thick white bakelite / laminated hard glossy surface sheet top cover fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 2.50 sqmm size stranded FRLS copper conductor cable as in earth wire and connecting all metal parts to common earth dolly incl cutting and chases pinning in for concealed conduit wiring and making good of disturbed surface complete all as specified and directed.

Note for item No 200 & 201 :- Switch, Socket out-let etc will be measured and paid separately.

M & L for point wiring for modular fittings using 1.50 sqmm size, PVC insulated, unsheathed 1100 volts grade single core multi-stranded (FRLS) copper conductor cable in proper colour coding drawn into and including non metallic rigid PVC conduit medium grade (not less than 20 mm dia) with metal flush box for mounting of modular fitting and cover plate ( metal box, inner and outer plates with cover etc shall be measured and paid seperately under respective items) including one continuous run of PVC insulated (green colour) 1.50 sqmm size stranded FRLS copper conductor cable as in earth wire and connecting all metal parts to common earth dolly incl cutting and chases pinning in for concealed conduit wiring and making good of disturbed surface complete all as specified and directed for the following: -

One light point / fan point / bell push point controlled by one modular switch 6 Amp.

One 3 pin 6 amp modular socket out let point controlled by one switch on the same board.

One 3 pin 6 amps modular socket out let point on independent board

M & L power point wiring for modular fittings of copper cable FRLS grade,multi stranded 2.5 Sqmm size for one 5 pin modular socket outlet 15 Amps on independent board with 2.5 Sqmm size of copper cable FRLS grade,multi stranded earth conductor cable in proper colour coding drawn into and including non metallic rigid PVC conduit medium grade (not less than 20 mm dia) with metal flush box for mounting of modular fitting and cover plate ( metal box, inner and outer plates with cover etc shall be measured and paid seperately under respective items) including one continuous run of PVC insulated (green colour) 2.50 sqmm size stranded FRLS copper conductor cable as in earth wire and connecting all metal parts to common earth dolly incl cutting and chases pinning in for concealed conduit wiring and making good of disturbed surface complete all as specified and directed.

S&F modular switch, one way 6 Amps, one module of suitable colour complete all as specified and directed.

S&F modular bell push, single pole , one way 6 Amps, one module complete all as specified and directed.

S&F modular fan regulator 120 watt, 250 Volts, 2 module of suitable colour complete all as specified and directed.

S&F modular switch, one way 16 Amps, one module of suitable colour complete all as specified and directed.

S&F modular socket , 6 Amps, 2/3 pin combined, 2 module complete all as specified and directed.

S & F modular socket , 6 Amps/ 16 Amps, 2/3 pin combined, 2 module of suitable colour complete all as specified and directed.

S&F modular cover plate with frame, 1 module complete all as specified and directed.

S&F modular cover plate with frame, 3 module complete all as specified and directed.

S&F modular cover plate with frame, 6 module complete all as specified and directed.

S&F modular cover plate with frame, 8 module complete all as specified and directed.

S&F modular cover plate with frame, 12 module complete all as specified and directed.

S&F modular metal flush box 1/2 module complete all as specified and directed.

S&F modular metal flush box 3 module complete all as specified and directed.

S&F modular metal flush box 6 module complete all as specified and directed.

S&F modular metal flush box 8 module complete all as specified and directed.

S&F modular metal flush box 12 module complete all as specified and directed.

S & F Switch piano, flush type, ivory finish 5/6 Amps single pole, one way complete all as specified and directed.

S & F of switch piano, flush type, ivory finish 5/6 Amps single pole, two ways complete all as specified and directed.

S&F of fan regulator electronic type suitable for 180 watt 250 volt step socket type complete all as directed

S & F of switch piano, flush type, ivory finish 15/16 Amps single pole, one way complete all as specified and directed.

S & F of socket out let 2 in 1, 3 Pin suitable for 5 Amps flush type complete all as specified and directed.

S & F of socket out let 2 in 1, 3 Pin suitable for 5 and 15 Amps flush type complete all as specified and directed.

S&F modular lamp holder with metal ring, PVC/ Polycarbonate type with back plate for batten/angle fittings complete all as specified and directed.

S & F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S & F of ceiling rose, 3 terminals PVC/ Polycarbonate, isolated body complete all as specified and directed.

S & F bells AC 230 V single pole multi music type complete all as specified and directed.

S&F Bell push single pole one way 5 Amps flush type complete all as specified and directed

S & F LED Lamp , aluminium heat sink powder coated white with PC diffuser & B22 base caps, 9 watt, 240 volts complete all as specified and directed.

S&F ultra slim LED 1x20 Watt, 230V, T8 batten white powder coated decorative end cap with retrofit polycarbonate glass tube LED 1200mm long with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with 3core 1.5 Sqmm size complete all as specified and directed. Make : Havells Cat part No REGAL BATTENT 8 UPTO 01 X 22 WDSBSWH, C & S cat part No TARA - Ei/20W, Crompton Cat part No LCTL - 18 - CDL incl LED Tube light with G- 13 lamp holder 20 W .

Re-fixing LED tube light fitting complete with retrofit polycarbonate glass tube of any watt received from taking down and after cleaning and suitable repairs etc including connecting up with twin core twisted flexible copper conductor cable with 3core 1.5 Sqmm size complete all as specified and directed.

S & F bed side LED light fitting, 6 watt, with independent switch & G-22 holder and LED lamp complete all as specified and directed.

S&F LED 12 Watt ceiling light round surface mounted die cast aluminium housing with frosted diffuser inclding LED lamp complete all as specified and directed. Make :- Havells Cat part No LHEAABP7IL1W012, C & S Cat part NO CRONA-RND/18W/W, Cromtpon Cat part No -LCDSPLN-R-18 CDL

S & F of wall bracket type, 12 watt LED decorative fixture made up of polycarbonate base B-22 and LED lamp complete all as specified and directed. Make :- Havells cat part No : LHDL06160099, Surya Cat part No - SLEWL 6W-GS200, Compact Cat part No L- 290 - 6W

Re-fixing of any type of decorative light fitting received from taking down and after cleaning and suitable repairs etc including fixing of 1x9 watt LED lamp complete all as specified and directed. Note: LED lamp will be measured and paid separately under respective items.

S&F LED mirror light 10 Watt with surface mounted with cover retrofit polycarbonate glass tube inclding LED tube light 60cm (approx) complete all as specified and directed.

S&F LED Bulkhead light fitting 10 watt with engineering plastic housing and clear prismatic diffuser, heat sink integrated including smd LED 10 watt lamp complete all as specified and directed. Make :- Havells cat part No : HEXAFT 10W LED 857SSYMBOPC, C & S Cat part NO 3 eTATRA/10W, Cromtpon Cat part No - LMHE -10CDL

Supply & Fixing bldg security light fitting, LED type, 25 Watt, pressure die cast housing with prismatic polycarbonate diffuser & including LEDs as light source with integrated electronic driver complete with M&L GI pipe mounting bracket of size 25/32 mm dia and 1.20 m long fixed to wall with and including nut, bolts and GI clamps of size 25 x 4 mm as required including two coats of synthetic enameled paint over a coat of primer and making connection with three core 1 sqmm copper conductor cable complete all as specified and directed. Make :- Havells cat part No- ENDURAPEARLS 25 W LED 757SASYTOPCMP, C&S cat part No INDUS/25 W, Crompton cat part No – LST-25-CDL-M

Re-fixing of geyser (retrieved from item Sl No 197) after minor repair if any with all necessary PVC connection and nuts bolts with electrical connection complete all as specified and directed.

Hanging only ceiling fans of any sweep received from item Sl No 198 after minor repair by replacement of parts such as capacitor, connector, pins, rubber reel, nut bolts with washers and oiling greasing, cleaning and writing MES No with black synthetic enamel paint 2.0 cm high complete all as specified and directed.

Fixing only exhaust fan of any sweep received from item Sl No 198 after minor repair by replacement of parts such as capacitor, connector, nut bolts with washers and oiling greasing, cleaning and writing MES No with black synthetic enamel paint 2.0 cm high complete all as specified and directed.

S&F ventilator fan 250 mm sweep PVC body with louver shutter complete fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 23/0.0076 copper cable, rubber insulated from ceiling rose to exhaust fan motor and writing MES No with black synthetic enamel paint 2.0 cm high for offrs toilets complete all as specified and directed. Make :- Havells Ventilair DX6 blades (250mm)/ Crompton / Usha

S & F of sub main wiring alongwith earthwire for two single core 4.00 sqmm size sub main wiring with one single core 4.00 sqmm size earthwire drawn into and including one run 25 mm or higher dia PVC conduit fixed concealed. PVC insulated PVC unsheathed multi-stranded copper conductor cable FRLS in and including PVC conduit medium grade ISI marked, fixed concealed of size as mentioned below complete with all conduit all accessories / fittings as required at site and connecting of earthwire to common earth dolly complete all as specified and directed. Note :- Three run of 4.00 sqmm copper cable and one run of conduit shall be measured as one unit.

S & F of sub main wiring alongwith earthwire for two single core 6.00 sqmm size sub main wiring with one single core 6.00 sqmm size earthwire drawn into and including one run 25 mm or higher dia PVC conduit fixed concealed. PVC insulated PVC unsheathed multi-stranded copper conductor cable FRLS in and including PVC conduit medium grade ISI marked, fixed concealed of size as mentioned below complete with all conduit all accessories / fittings as required at site and connecting of earthwire to common earth dolly complete all as specified and directed. Note :- Three run of 6.00 sqmm copper cable and one run of conduit shall be measured as one unit.

S & F of sub main wiring alongwith earthwire for two single core 10.00 sqmm size sub main wiring with one single core 10.00 sqmm size earthwire drawn into and including one run 25 mm or higher dia PVC conduit fixed concealed. PVC insulated PVC unsheathed multi-stranded copper conductor cable FRLS in and including PVC conduit medium grade ISI marked, fixed concealed of size as mentioned below complete with all conduit all accessories / fittings as required at site and connecting of earthwire to common earth dolly complete all as specified and directed. Note :- Three run of 10.00 sqmm copper cable and one run of conduit shall be measured as one unit.

Supply & fixing modular type starter with ON & OFF button of Green & Red up to 25 Amp for motor starter / Air conditioner 230 Volts , single Phase AC Suply complete all as specified and directed. Make :- HPL, Havells & Siemens

M&L for sheet metal enclosure for DB's double door 240 V, SPN 4 way with rated 200 Amp bus bar complete all as specified and directed.

M&L for sheet metal enclosure for DB's double door 240 V, SPN 8 way with rated 200 Amp bus bar complete all as specified and directed.

M&L for sheet metal enclosure for DB's double door 240 V, SPN 12 way with rated 200 Amp bus bar complete all as specified and directed.

S&F Minature circuit breaker Single pole and Neutral with thermal over load as well as magnetic short circuit tripping device with quick break trip free mechanism, robust design and terminals having heat resistant moulding suitable for single phase circuit of 240 volts and 32 to 63 Amps current rating, B series, 10 KA complete all as specifed and directed.

S&F Minature circuit breaker single pole with thermal over load as well as magnetic short circuit tripping device with quick break trip free mechanism, robust design and terminals having heat resistant moulding suitable for single phase circuit of 240 volts and 6 to 32 Amps current rating, B Series 10 KA complete all as specifed and directed.

(a) M&L for energy meter AC Single Phase Two Wire, prepaid energy Meter, BIS marked, key pad based digital, display of Accuracy Class 1.0, 240 V, 50 Hz, 10-60 Amp ABC Code, along with parallel in home display unit for remote monitoring at houses with inbuilt load control switch including suitable SMC meter box with atleast 2 Nos sealing arrangement along with 02 Nos polycarbonate meter seal suggested with dual facility of meter reading from meter reading instrument including customer interface unit for data transfer and making connection complete all as specified and directed. (Make: Secure, HPL, L & T)

(b) Lib audit software along with 2 Nos CMRI for meter data analysis having memory of 8 GB complete all as specified and directed. (Make: Secure, HPL, L & T)

(c) Vending computer PC with processor P-4 dual core, 4 GB RAM, hard disk 500 GB 01 CD/DVD combo drive R/W type - 4USB port complete all as specified and directed. (Make:- HP/DELL/HCL with licensec operating system (Window-8) alongwith UPS.)

(d) Report printer for report printing complete as required complete all as specified and directed. (Make: HP cat part: Laser Jet P1008/ Canon cat part: LBP2900B/ Epson cat part: M2140)

(e) Supply of Impact token printer with serial/USB port. (Make: Trucount cat part: T-90/ Epson cat part: TM-P80/ LS cat part: LS-1280A)

(f) Implementation of vending system, data base defining/mapping of consumer & running the vending system, training to system users alongwith user manual for meter = One time per Energy meter complete all as specified and directed.

(g) Vending charges for 'N' Nos of coupons per consumer annually = Five years per energy meter complete all as specified and directed.

(h) Supply, Installation of two pair control cable laying in PVC conduit to connect meter to parallel in home display unit for remote access data operation from home alongwith both side connector punching complete all as specified and directed.

Material and labour for earthing with galvanised steel earth plate electrided 600 X 600 X 6 mm thick buried in ground (earth pit not less than 2.25 mtr depth below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to GI earth lead wire 4.0 mm dia by means of bolts nuts chek nuts and washers of galvanized iron or steel earth lead wire protected by and including 15 mm dia GI pipe medium grade pipe for protection and 20 mm dia GI pipe (light grade) for watering and connected to control switch as directed including necessary earth work as in soft/loose soil, concrete pit in PCC (1:3:6) type c1, pre cast RCC 1:1:5:3) type A1 cover slab duly reinforced with 8mm dia TMT bar @ 100 mm CC both way and 2 No, lifting handle made of 12mm dia TMT bar and set in cement mortor (1:4), funnel wire nesh, char-coal or coke and salt in alternate layer, testing etc complete all as specifide in electrical plate No. 3 of SSR Pt-1 all as specified and directed.

EXTERNAL ELECTRIFICATION

Taking down defective LT services cable/ UG cable PVC insulated armoured XLPE with aluminium conductor 1100 volt grade of any size and capacity from trenches/floors/poles complete all as specified and directed.

Supply and laying in trenches / ducts, passing through GI pipe / fixing on poles 1100 volts grade, 25 Sqmm 4 core, electric power cable (heavy duty), XLPE insulated armoured heavy duty electric cable and PVC sheathed galvanised steel strip or wire armoured with stranded aluminium conductor including commissioning and testing complete all as specified and directed.

Supply and laying in trenches / ducts, passing through pipe / fixing on poles 1100 volts grade, 35 Sqmm 3½ core, electric power cable (heavy duty), XLPE insulated armoured heavy duty electric cable and PVC sheathed galvanised steel strip or wire armoured with stranded aluminium conductor including commissioning and testing complete all as specified and directed.

M&L river washed and screeened dry fine sand filling in trenches below and above / around under ground cable for cable protection including punniing around cable complete all as specified and directed.

M & L for laying brick as in protection covers over cables usingfly ash bricks complete all as specified and directed.

Dismantling corroded unservicable LT panel board with various switches, supply , fixing, testing and commisioning LT panel board of suitable size made out of CRCA sheet 3mm thick outer and 2mm thick for inner, door with legs of angle iron 50 mm X 50mm X 6mm, totally enclosed with front and rear opening door with locking arrangement, free floor standing, vermin and dust proof with siemens grey paint and space for provision to accommodate the following items (which shall be measured separately) including internal wiring with suitable size copper conductor and necessary foundation base in PCC (1 : 2 : 4) mix using 20mm graded stone aggregate, type B-1 complete including preparation and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed including following accesories/ components:- (a) Copper bus bars of capacity 600 amps for 3 phase and half the neutral, including PVC heat shrink sleeves (RYB & N) - 01 set

Dismantling corroded unservicable LT panel board with various switches, supply , fixing, testing and commisioning LT panel board of suitable size made out of CRCA sheet 3mm thick outer and 2mm thick for inner, door with legs of angle iron 50 mm X 50mm X 6mm, totally enclosed with front and rear opening door with locking arrangement, free floor standing, vermin and dust proof with siemens grey paint and space for provision to accommodate the following items (which shall be measured separately) including internal wiring with suitable size copper conductor and necessary foundation base in PCC (1 : 2 : 4) mix using 20mm graded stone aggregate, type B-1 complete including preparation and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed including following accesories/ components:- (a) Copper bus bars of capacity 400 amps for 3 phase and half the neutral, including PVC heat shrink sleeves (RYB & N) - 01 set

Note : Tenderers may note that amount of credit Rs 13,22,812.00 will be deducted from the total amount arrived, at the time of Acceptance of contract.

TEAM ACC INFRABUILD PRIVATE LIMITED

EASTERN CONSTRUCTION COMPANY

Sudhir Sharma Associates

SOOD ASSOCIATES PVT LTD