CPPP

Active

Works

Civil Works

Repair and Maintenance of Gas Agency at 25 Bn BSF Campus Chhawala under DIG (HQ) FHQ BSF New Delhi.

DG,BSF,MHA

25 Bn BSF Chhawla Delhi | South West Delhi, Delhi | New Delhi, Delhi

Amount: ₹4.4 LCloses: 30 Sept 20262d left

Timeline

Published22 Sept 2026
Closes30 Sept 2026
Bid Opening1 Oct 2026

Tender Value

₹4.4 L

EMD Value

₹8,824

Closing Date

30 Sept 2026, 11:00 am2d left

Tender Inviting Organisation

Name

Assistant Commandant Works

Address

DIG (HQ) FHQ BSF NEW DELHI

Work Description

Repair and Maintenance of Gas Agency at 25 Bn BSF Campus Chhawala under DIG (HQ) FHQ BSF New Delhi.

Tender Information

Tender ID

2026_BSF_927113_1

Reference Number

09 /NIT/CIVIL/MINOR/DIG (HQ)/2026-27

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Works

Location

25 Bn BSF Chhawla Delhi

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

10 documents required · 10 mandatory

Fee/PreQual/Technical

RequiredScanned copy of Enlistment of Contarctor (.pdf)

RequiredScanned copy of Earnest Money as per NIT (.pdf)

RequiredScanned copy receipt for deposition of EMD as per NIT (.pdf)

RequiredScanned copy contractor details in his letter head as per NIT (.pdf)

RequiredScanned copy of Pan Card (.pdf)

RequiredScanned copy of GST registration certificate as per NIT (.pdf)

RequiredScanned copy of EPF,ESIC registration certificate (.pdf)

RequiredScanned copy work experience (.pdf)

RequiredScanned copy of an affidavit (Rs.100) as per NIT (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹8,824

Important Dates

Last Activity

22 Sept 2026

Published

22 Sept 2026

Bid Opening

1 Oct 2026

Download Starts

22 Sept 2026

Download Ends

30 Sept 2026

Submission Starts

22 Sept 2026

Bill of Quantities

PercentageBoQ_Ver4.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (20 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources).	10.3	cum	6,812	₹70,163.6
2	Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation leveling & dressing & finishing the top smooth.	37.8	sqm	749.3	₹28,323.54
3	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand)	3.04	cum	9,105.95	₹27,682.09
4	Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)	37.8	sqm	1,123.8	₹42,479.64
5	Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With second class teak wood beading 62X19 mm	10	sqm	1,308.35	₹13,083.5
6	Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /seIf tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	105.3	sqm	738.65	₹77,779.85
7	Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :Ridges plain (500 - 600mm)	13.5	metre	532.35	₹7,186.73
8	15 mm cement plaster on the rough side of single or half brick wall of mix : :1:6 (1 cement: 6 fine sand)	13.5	metre	1,313.7	₹17,734.95
9	12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)	26.4	sqm	333.35	₹8,800.44
10	15 mm cement plaster on the rough side of single or half brick wall of mix : :1:6 (1 cement: 6 fine sand)	40	sqm	383	₹15,320

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 1.08 MB

Work Item Documents

BOQ_974282.xls

BOQ • 0.40 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources).

10.3

cum

6,812

₹70,163.6

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation leveling & dressing & finishing the top smooth.

37.8

sqm

749.3

₹28,323.54

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand)

3.04

cum

9,105.95

₹27,682.09

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)

37.8

sqm

1,123.8

₹42,479.64

Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With second class teak wood beading 62X19 mm

sqm

1,308.35

₹13,083.5

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /seIf tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

105.3

sqm

738.65

₹77,779.85

Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :Ridges plain (500 - 600mm)

13.5

metre

532.35

₹7,186.73

15 mm cement plaster on the rough side of single or half brick wall of mix : :1:6 (1 cement: 6 fine sand)

13.5

metre

1,313.7

₹17,734.95

12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)

26.4

sqm

333.35

₹8,800.44

15 mm cement plaster on the rough side of single or half brick wall of mix : :1:6 (1 cement: 6 fine sand)

sqm

383

₹15,320