RETROFITTING WORK OF VAN BHAVAN OFFICE BUILDING AT ADAJAN IN SURAT (BUILDING GALLARY)

Bill of Quantities

Qty. May Tender Rate

Sr. No. Description of Item Unit Total Amount

Sr. No. Description of Item Unit Total Amount

More Or Less Rate In FIghure

Dismentaling tiled of stone floors laid in mortar including

stacking of serviceable materilas and disposal of

1 unserviceable materials with all lead and lift. Smt 18.84 50.11

Demolition of Brickwork and stone masonary including

stacking of serviceable materials and disposal of

unserviceable materials with all lead and lift. (ii)In cement

Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and disposing

off the excavated stuff upto 50 Meter lead.(C) Hard

Murrum/or any surface

Filling in plinth and foundation with sand under floors

4 including watering ramming, consolidating and dressing Cmt 5.00 481.80

Filling in foundation and plinth with murrum or selected soil

in layers of 20cm. thickness including watering, ramming

and consolidating etc. complete. (more than 10 ton)

Filling available excavated earth (excluding rock) in

trenches. plinth, sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidating each

disposited layer by ramming and watering.

Carring out plinth treatment to post construction / existing

structure by spraying chemical solution for termite control

treatment including labour and material consistent with I.S.I

specification. Using Chlordane and Chiorpurfiles 20 EC. As

7 Per 6131_paret-II Concentration Weight one percent is Smt. 32.00 87.03

recommended i.e one liter 20 EC chemical emulsion with

liter give 1 % concentration inclusive of one liter chemical

emulsion application at the rate of 5 Liter chemical/ Sqm of

surface is recommended as per I.S.

Providing and laying cement concrete 1:2:4 (1- Cement : 2-

Coarse sand : 4- graded stone aggregates 20 mm nominal

size) and curing complete excluding cost of formwork in (A)

Foundation and Plinth

Brick work using common burnt clay building bricks having

9 crushing strength not less than 35 Kg./Sq.,Cm. in Super Cmt 0.00 4,503.04

Structure in C.M. 1:6 (B) conventional

Qty. May Tender Rate

Sr. No. Description of Item Unit Total Amount

Sr. No. Description of Item Unit Total Amount

More Or Less Rate In FIghure

Providing and laying in position Ready Mixed M-300 grade

concrete for reinforced cement conctere work , using

cement content as per approved Design Mix manufactured

in fully automatic batching plant and transported to site of

work in transit mixer for a lead up to 10 kms having

continuous agitated mixer, manufactured as per mix design

of specified grade for reinforced cement concrete work

including pumping of R.M.C. from transit mixer to site of

laying, including the cost of centering shuttering finishing

and excluding reinforcement including cost of admixtures in

recommended proportions as per IS: 9103 to accelerate/

retard setting of concrete, improve workability without

impairing strength and durability as per direction of the

Engineer - in - charge. Without Fly Ash (Min cement level as

per latest IS 456 shall be maintained) (Cement level 475 kg )

Providing and fixing temporary steel props/support system

to take the load of the surrounding structure during the

repair process, including necessary staging and removal

11 after completion. complete with all the required tools, Sqm 131.00 404.00

tackles, labourers as required and as directed by the

engineer in charge. Unit will be in sqm and For

measurement, column Height and Length will be measured.

Chipping of existing concrete surface using mechanical

tools to remove loose/damaged concrete and expose coarse

aggregates, including cleaning the surface with wire brush,

removal of dust, debris and laitance. P/A ANTI CORROSIVE

RUST REMOVER ON REIN Providing and applying anti

corrosive rust remover "Rusticide" of M/S Sunanda

speciality coating pvt Ltd or equivalent approved including Smt. 110.00 585.80

cleaning the reinforcement bars with wire brush or air

blowing including removing of all loose particle with

applying rust remover thoroughly on reinforcement bars by

using cotton waste swab etc. complete with all the required

tools, tackles, labourers as required and as directed by the

engineer in charge.

Drilling holes in existing column using rotary hammer drill

and fixing 12 mm dia L-shaped TMT bars as shear

connectors in zig-zag pattern at 600 mm c/c on all faces,

13 including cleaning of holes, filling with approved Nos 260.00 196.95

epoxy/chemical grout and proper anchorage. complete with

all the required tools, tackles, labourers as required and as

directed by the engineer in charge.

Providing and applying polymer modified mortar treatment

in proportion (Cement : White Sand : SBR = 1 : 1 : 0.14) in

layers up to 22 mm thickness each by hand pressing method

over prepared concrete surface, including surface cleaning

14 and roughening, application of bonding coat, placing and Smt. 110.00 858.50

compacting mortar, finishing to a rough texture to ensure

proper bond with subsequent RCC jacketing, including

curing, all materials, labour, tools and equipment complete

as per specification and directed by EIC.

Qty. May Tender Rate

Sr. No. Description of Item Unit Total Amount

Sr. No. Description of Item Unit Total Amount

More Or Less Rate In FIghure

Providing formwork of ordinary timber planking so as to

give a rough finish including centering shuttering strutting

and propping etc. Height of propping and centering below

15 supporting floor to ceiling not exceeding 4M. and removal Smt. 131.00 320.70

of the same for insitu reinforced concrete and plain concrete

work in. (G) Columns Pillars Posts and struts

Providing and laying minimum 100 mm thick RCC jacketing

around existing column using design mix M30 micro

concrete, including addition of approved admixtures

(superplasticizer) and fiber reinforcement 3s 12mm fibers

(Recron or equivalent),

16 including: Cmt 16.00 46,460.00

-Pouring/pumping of micro concrete

-Compaction using vibrator

-Finishing to line and level

The work shall be carried out from foundation level up to

required height

Providing TMT Bar FE 500D reinforcement for R.C.C. work

17 including bending, binding and placing in position complete Kg 2246.00 77.29

upto floor two level

Providing 15mm thick Water proof Cement Plaster in single

coat on brick/concrete wall for interior/exterior plastering at

18 all floor Lvl. & finished even and smooth in(i) Cement mortar Smt 145.00 199.02

1:4 (1-cement :4-sand) For all floor, etc. Complete, as per

detailed and directed by EIC

20mm thick sand faced cement plaster on walls upto height

10 metres above ground level consisting of 12mm thick

19 backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm Smt 0.00 347.42

thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc.

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x

24'' in flooring treads of steps and landing laid on a bed of

20 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) Smt 16.90 1,092.37

finishing with flush pointing in white cement.

Applying two coats of Birla or Asian acrylic lappy ( putty) &

two coats of primer at Wall painting (two coats) with plastic

emulsion paint of approved brand & manufacture on

21 undecorated wall surfaces to give an even shade including Smt 145.00 123.95

thoroughly brushing the surface free from mortar droppings

& other foreign matter & sand papered smooth, as per

detailed & directed by EIC.

I/We am/are willing to carry out the work @............ % above/below percent ( should be

written in figures & Words) of the estimated rates mentoined above . Amount of my/our

tender work out as under .

Estimated amount put to tender Estimated amount put to tender

Qty. May Tender Rate

Sr. No. Description of Item Unit Total Amount

Sr. No. Description of Item Unit Total Amount

More Or Less Rate In FIghure

Deduct:……………………...….% below Add……………………..……..% above

IN words IN words

(Please strike out whichever is not applicable.)

The Contractor shall exhibit a board with detailed specification and details of work as

1 directed by the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.:

PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C.

items where there is a change as per actual mix design the cost of difference of cement consumption

have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Signature of Contractor with Seal Signature of Contracting Authority with Seal