PROVN OF FACADE LIGHTS AT NAVAL OFFICERS INSTITUTE UNDER AGE E/M NO-I OF GE (U-I) VISAKHAPATNAM

Amount

Supply, installation and commissioning of exterior BIS registered LED RGBW flood lighting luminaire for facade lighting with Die-cast aluminium housing, powder-coated finish, Clear toughened glass cover of 4mm thickness, total System wattage not exceeding 70W with system lumen output > 2600 lm with all LEDs on with all LEDs on complete all as specified and as directed. Make : Havells / Signify Innovations India Ltd (Formerly Phillips) / Crompton / Jaquar Co Pvt Ltd (Contd...)

Note - Unit rate quoted against this item shall be considered to include following:- (i) Luminaire shall be capable of producing dynamic color changing light with 16 million colors as the light fixture should be programmable using 8 bit control DMX512 protocol / Ethernet based control. (ii) Luminaire should be complete with dedicated Lens made up of UL/VDE approved PC for each LED, offering beam angle of different types such as narrow, medium, wide or elliptical as per site requirement. (iii) Fixture should have Height 364 mm ± 5% including surface mount base width 188 mm ± 5%, length 390 mm ±5% with constant locking hinges for simple position control from various angles without special tools. (iv) Fixture shall be suitable to operate at an ambient temperature range of -30°C to 50°C and complete luminaire shall be IP66 and IK07 rated. LED Life time shall be at least L70B50 @ 70000 burning hours at 50°C. (v) LED should be with ceramic package of make Nichia / Osram / Cree / Lumiled only. DMX enabler circuit should be inside the Luminaire only. (vi) Luminaire shall be complete with integrated BIS IP 66/67 potted driver and capable of operating at line voltage from 90-305 Vac, 50Hz with power factor > 0.9 (vii) The product should be BIS approved with R number mentioned on product label. To be supported with Product test reports - LM79, BIS Report and LEDs Test Reports. (viii) Luminaire shall be conforming to BIS i.e. IS 10322 (Part 5/Sec 5) and shall be complete with all necessary accessories required for proper working of fixture etc. as required.

Supply, installation and commissioning of exterior BIS registered RGBW Linear LED Wall Washer luminaire for facade lighting with extruded aluminium housing, powder-coated finish, Clear toughened glass cover of 4mm thickness and die casted end caps, Total System wattage not exceeding 24W with system lumen output >1350 lm with all LEDs on complete all as specified and as directed. Make : Havells / Signify Innovations India Ltd (Formerly Phillips) / Crompton / Jaquar Co Pvt Ltd (Contd...)

Note - Unit rate quoted against this item shall be considered to include following:- (i) Luminaire shall be capable of producing dynamic color changing light with 16 million colors as the light fixture should be programmable using 8 bit control DMX512 protocol / Ethernet based control. (ii) Luminaire should be complete with dedicated Lens made up of UL/VDE approved PC for each LED, offering beam angle of different types such as narrow, medium, wide or elliptical as per site requirement. (iii) Fixture should have Height 81 mm ± 5% including surface mount base width 42.8 mm ± 5% , length 1000 mm ± 5% with constant locking hinges for simple position control from various angles without special tools. (iv) Fixture shall be suitable to operate at an ambient temperature range of -30°C to 50°C and complete luminaire shall be IP66 and IK07 rated. LED Life time shall be at least L70B50 @ 70000 burning hours at 50°C. (v) LED should be with ceramic package of make Nichia, Osram, Cree, Lumiled only. DMX enabler circuit should be inside the Luminaire only. (vi) The rated voltage of the Luminaire should be 24VDC, Luminaire shall be offered with a BIS Approved Potted Driver of IP 66/67 rating made of extruded aluminium to make it more thermal efficient, LED Driver should have Operating input voltage range: 90-305Vac, PF > 0.90 and must have safety operation range form 90V - 176Vac. (vii) The luminaire should be BIS approved with R number mentioned on product label. To be supported with Product test reports - LM79, BIS Report and LEDs Test Reports. (viii) Luminaire shall be conforming to BIS i.e. IS 10322 (Part 5/Sec 5) and shall be complete with all necessary accessories required for proper working of fixture etc. as required. (ix) Life time of LED driver should be > 80,000 hours and MTBF of LED driver should be ≥ 2,00,000 hrs, Led driver must have SELV output and Case temperature i.e. Tc > 90°C.

Supply, installation and commissioning of exterior BIS registered RGBW Linear LED Wall Washer luminaire for facade lighting with extruded aluminium housing, powder-coated finish, Clear toughened glass cover of 4mm thickness and die casted end caps, Total System wattage not exceeding 12W with system lumen output >950 lm with all LEDs on complete all as specified and as directed. Make : Havells / Signify Innovations India Ltd (Formerly Phillips) / Crompton / Jaquar Co Pvt Ltd (Contd...)

Note - Unit rate quoted against this item shall be considered to include following:- (i) Luminaire shall be capable of producing dynamic color changing light with 16 million colors as the light fixture should be programmable using 8 bit control DMX512 protocol / Ethernet based control. (ii) Luminaire should be complete with dedicated Lens made up of UL/VDE approved PC for each LED, offering beam angle of different types such as narrow, medium, wide or elliptical as per site requirement. (iii) Fixture should have Height 81 mm ± 5% including surface mount base width 42.8 mm ± 5% , length 500 mm ± 5% with constant locking hinges for simple position control from various angles without special tools. (iv) Fixture shall be suitable to operate at an ambient temperature range of -30°C to 50°C and complete luminaire shall be IP66 and IK07 rated. LED Life time shall be at least L70B50 @ 70000 burning hours at 50°C. (v) LED should be with ceramic package of make Nichia, Osram, Cree, Lumiled only. DMX enabler circuit should be inside the Luminaire only. (vi) The rated voltage of the Luminaire should be 24VDC, Luminaire shall be offered with a BIS Approved Potted Driver of IP 66/67 rating made of extruded aluminium to make it more thermal efficient, LED Driver should have Operating input voltage range: 90-305Vac, PF > 0.90 and must have safety operation range form 90V - 176Vac. (vii) The luminaire should be BIS approved with R number mentioned on product label. To be supported with Product test reports - LM79, BIS Report and LEDs Test Reports. (viii) Luminaire shall be conforming to BIS i.e. IS 10322 (Part 5/Sec 5) and shall be complete with all necessary accessories required for proper working of fixture etc. as required. (ix) Life time of LED driver should be > 80,000 hours and MTBF of LED driver should be ≥ 2,00,000 hrs, Led driver must have SELV output and Case temperature i.e. Tc > 90°C.

S&F female supply cable M15, 3 Pin of length 1 metre suitable for RGBW Façade lighting system complete all as specified and as directed.

S&F extension cable M15, 3 PIN of length 1 metre suitable for RGBW Façade lighting system and of make as recommended by OEM of Façade light complete all as specified and as directed.

S&F extension cable M15, 3 PIN of length 3 metre suitable for RGBW Façade lighting system and of make as recommended by OEM of complete all as specified and as directed.

S&F CS junction box 3 way made out of powder coated aluminium and of size not less than 100mm x 100mm x 50mm, IP66 suitable for RGBW Façade lighting system and of make as recommended by OEM of complete all as specified and as directed.

S&F female supply cable M16C, 4 Pin of length 1 metre suitable for RGBW Façade lighting system and of make as recommended by OEM of complete all as specified and as directed.

S&F extension cable M16C, 4 PIN of length 1 metre suitable for RGBW Façade lighting system and of make as recommended by OEM of complete all as specified and as directed.

S&F extension cable M16C, 4 PIN of length 3 metre suitable for RGBW Façade lighting system and of make as recommended by OEM of complete all as specified and as directed.

S&F LED driver 150W, 24V, 6.3A suitable for RGBW Façade lighting system and of make as recommended by OEM of complete all as specified and as directed.

Supply, fixing, programming & commissioning DMX Controller suitable for RGBW Façade lighting system and of make as recommended by OEM of complete all as specified and as directed.

Supply & fixing Address writer suitable for RGBW Façade lighting system and of make as recommended by OEM of complete all as specified and as directed.

Supply & fixing instruction forwarder ranger / compass (AC) dedicated to amplify, forward and insulate the signal that comes from the DMX controller suitable for RGBW Façade lighting system and of make as recommended by OEM of complete all as specified and as directed.

Supply & fixing signal amplifier L11 For max 30 light suitable for RGBW Façade lighting system and of make as recommended by OEM of complete all as specified and as directed.

Supply & fixing DMX splitter (INK), 190 - 240 V nominal, 50/60 Hz suitable for RGBW Façade lighting system and of make as recommended by OEM of complete all as specified and as directed.

M&L earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground in vertical position (earth pit not less than 2.25 m deep below the normal ground level) with top edge of the earth plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire of 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel, all as shown in electrical plate No. 3 of SSR Part-I connected to earthing test point complete all as specified and directed. Note:- The unit rate shall also include for earth work in any type of soil, PCC 1:3:6 type C1 chamber, RCC 1:1.5:3, type A1 cover slab, 50 mm thick reinforced with 8 mm dia TMT bar @ 140 mm C/C both ways, 10 mm dia plain bar lifting handle embedded in cover slab, 20 mm bore medium grade GI watering pipe, 15 mm bore GI light grade earth lead protection pipe, funnel, wire mesh, copper lugs, charcoal and common salt in alternate layer etc.

Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, laying cables etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out all excavated material in soft / loose soil complete all as specified and directed.

Returning, filling in and including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed.

Removing of excavated surplus soil to a distance n. exc 50 m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

M&L sand cushioning with clean and dry sand in trenches for protection of UG cable and including punning down complete all as specified and directed. Note:- Punned thickness shall only be measured and paid.

Supply & laying sub class 'B', class designation 75 bricks of old size, laid along alignment of cable as protection to cable in trenches complete all as specified and directed.

Supply & laying LT XLPE insulated, armoured heavy duty electric cable with alumimium conductor, 1100 volts grade, cross sectional area 16 Sqmm x 4 Core, laid in trenches / duct / on pole complete all as specified and directed. Make :- Havells / KEI / Polycab / Gloster / Finolex

S&F 40 mm bore galvanised steel tubing, medium grade with necessary fittings, laid under road crossing, for cable protection / Lamps complete all as specified and directed. Make - Tata / Jindal Steel / Surya Roshni Ltd. / Bhushan Power & Steel Ltd. / M/s APL Apollo Tubes Ltd

S&F three phase, automatic street light control panel with and including astronommical timer switch for automatic switching on / off street light as per set time through programmable switch, 65A, TP power contactor, suitable capacity MCB / MCCB, wall / floor mountable, IP 54 (dust and vermin proof) enclosure made out of CRCA sheet duly powder coated, conforming to IS/IEC 60954-4-1, in-built- short circuit protection, locking arrangement with padlock and panel lock complete all as specified and directed. Make:- Havells / GE / Kakatiya energy system Pvt Ltd / Indo Asian

SRI MAHALAKSHMI CONSTRUCTIONS (BID ID -3095549)

MONITOR ENGINEERING WORKS (BID ID -3090063)