2059 SR to Multi Storey Building-1, Vastrapur, Ahmedabad. (Pro. New Aluminum Partition Section, Door, Window with mosquitos Net and other misc work at- Terrace Floor, Multi Storey Building-1, Vastrapur, Ahmedabad) (3rd attempt)

Name of Work :- 2059 SR to Multi Storey Building-1, Vastrapur, Ahmedabad. (Pro. New

Aluminium Partition Section, Door, Window with mosquitos Net and

other misc work at- Terrace Floor, Multi Storey Building-1, Vastrapur,

Ahmedabad) (3rd attempt)

Item Quantities Item of work Estimated Rates Unit Total Amount

Item Quantities Item of work Estimated Rates Unit Total Amount

No. Estimeted according to

but may be In Figures In Words Estimated

more or quantities

1 20.27 Providing & Fixing Colour anodized 3435.01 Rupees Sq.m.

Alluminium Partition PARTLY Three

PANNELED,PARTLY GLAZED Thousand

using alluminum section of Frame

size 63.50x38.10x1.95 mm (of

jindal Section no.4605 @ Wt.1.094 And Paise

Kg/Rmt) Partly Glazed 5mmt thick One Only

Modi Guard and Partly Fixed with

12mm thick exterior grade both

side prelaminated sheet including

rubber gasket and beading clips for

Glazing/ panneling and cleat

angle,with expansion hold

fasteners including necessary filling

up of gaps at Junction including all

required materials labour and

equipment as per detailed drawing

As Directed by Engineer in

Item Quantities Item of work Estimated Rates Unit Total Amount

Item Quantities Item of work Estimated Rates Unit Total Amount

No. Estimeted according to

but may be In Figures In Words Estimated

more or quantities

2 2.31 Providing and fixing door Single 6576.11 Rupees Six Sq.m.

shutter having factory fabricated Thousand

std. Extruded aluminium colour Five

anodized hollow section19552

weight is not less than 1.1 kg/mtr And Paise

{Section 63.50 x 38 mm x 2.50 mm Eleven Only

thick } for door frame, hollow

portion of door frame shall be filled

with wood to be insert for durable

grip of door hinges, with factory

made 35 mm.thick Single Shutter

flush door both side pre 1mm

laminated with 6 Lever Mortice

lock, SS Aldrop 30cm long, SS

Handle size 30 Cm Long, Tower

Bolt size 20 cm etc. as per detail

colour & pattern apporoved by this

office including necessary anodized

alluminum fixtures and fastenings.

Item Quantities Item of work Estimated Rates Unit Total Amount

Item Quantities Item of work Estimated Rates Unit Total Amount

No. Estimeted according to

but may be In Figures In Words Estimated

more or quantities

3 18.60 THREE TRACKS SLIDING WINDOW 5754.98 Rupees Five Sq.m.

(2 SHUTTERS + 1 MOSQUITO NET Thousand

STANDARD EXTRUDED COLOUR Hundred

ANODIZED ALLUMINIUM SECTION Fifty Four

EQUIVALENT TO JINDAL SERIES E And Paise

(30MM) SECTIONS NUMBERED: Ninety Eight

FRAME-BOTTOM WITH WEEP Only

HOLES- 20928, FRAME TOP & SIDE

- 20837; SHUTTER TOP & BOTTOM-

20993, SHUTTER INTER LOCK -

20550, SHUTTER SIDE (HANDLE) -

20549, WITH 5 MM THICK

TRANSPARENT TINTED FLOAT

GLASS, WITH EPDM RUBBER

GASKET, AIR LOCK STRIP AND

FINISHING JOINTS WITH SILICON

SEALANT, WITH POWDER,

COATED STANDARD ALLUMINIUM

FITTINGS. AS PER DRAWING AND

INSTRUCTION OF ENGINEER

INCHARGE etc. COMPLETE FOR

Item Quantities Item of work Estimated Rates Unit Total Amount

Item Quantities Item of work Estimated Rates Unit Total Amount

No. Estimeted according to

but may be In Figures In Words Estimated

more or quantities

4 1.43 Table - 8792.05 Rupees Sq.m.

Providing and supplying Table Eight

made with 19mm Thk. Plywood Thousand

structure as per architect Seven

drawing finished with 1.0 mm

Thk. decorative laminate on And Paise

outside portion &0.8 mm Thk. Five Only

liner Laminate inside as

specified & approved by

architect with fixed with necessary

fixtures and fastening (Hardware)

as per architect drawing. Provide

Plastic Computer Desk Table

Grommet Cable Wire Outlet

Hole Cover 60mm, Key-board

trey,S.S. legs, Drawers with

telescopic roller channels

Handle and locking arrangements

with all necessary fixtures and

fastening ). Provide Shutters as

per drawing fixed with handle

hinges , magnet , complete with

bidding patties and all required

hardware.Provide footrest as per

drawing. All exposed edges shall

be covered with required Teak

wood beading Patti finished

with approved melamine

polishing work. Complete as per

architect's drawing and as per

instruction of architect & engineer

Item Quantities Item of work Estimated Rates Unit Total Amount

Item Quantities Item of work Estimated Rates Unit Total Amount

No. Estimeted according to

but may be In Figures In Words Estimated

more or quantities

5 31.20 Wall painting three coats of plastic 153.54 Rupees One Sq.m.

emulation paint [In addition to two Hundred

coats of Lappy-Putty + two coats of

primer] of approved Asian Paint, Fifty Four

Indigo Paint, Dulux Paint [Asian Only

Paint Appcolite Category Minimum]

and manufacture on undecorated

wall surface to give an even shade

including thoroughly brushing the

surface free from mortar dropping

and other foregine matter and sand

papered smooth.)

Rs. In words : Rupees Two Lakh(s) Nine Thousand Two Hundred Twenty Four And Paise

I / We am / willing to carry out the work at __________ above / below __________ percentage

(should be written in figures and words) above / below the estimated amount mentioned above.

Amount of my/our tender works out as under.

Estimated Amount put to Estimated Amount put to

Deduct _________ % Below. Add _________ % Above.

Item Quantities Item of work Estimated Rates Unit Total Amount

Item Quantities Item of work Estimated Rates Unit Total Amount

No. Estimeted according to

but may be In Figures In Words Estimated

more or quantities

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by

the Engineer-In-Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt.

G.R.: PRC-10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated inS.O.R. therefore in

R.C.C. items where there is a change as per actual mix design the costof difference of cement

consumption have been deducted from the rate of original item at the rate of input rate mentioned

in all the tender.

5. Credit of Dismentalled Material Amount Rs. ______________ will be deducted from 1st R.A. Bill.

Dated Signature of Deputy Executive Engineer

the Contractor Construction (R & B) Sub Dn.-4