Tender for ARC Work for Erection of HT/LT lines , T/C & maintenance of feeders for various scheme under CFC and any other SDn if Required under jurisdiction of Sachin Division Under ALL Scheme.

CAPITAL WORK LABOUR RATES FOR FY 2024-25 (WITHOUT GST)

Item Code Item Unit FY 2024-25

HT TAPPING FROM THE EXISTING POLE INCLUDING FIXING OF

CROSS ARMS, CLAMPS ANTI-CLIMBING DEVICES, DANGER

BOARD, INSULATORS ETC. COMPLETE AND PAINTING OF

FABRICATED MATERIALS AND NUMBERING COMPLETE WITH

COST OF PAINTS AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SET AND EARTHING.

ERECTION OF PSC POLES OF 8 *200 KG INCLUDING EXCAVATION

OF PIT AND REFILLING OF EARTH, FIXING OFCROSS ARMS, TOP

FITTING CLAMPS ANTI-CLIMBING DEVICES, INSULATORS ETC.

2 9926000002 COMPLETE AND PAINTING OF FABRICATED MATERIALS USED No.

ON THE POLES AND NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY

SET AND EARTHING.

ERECTION OF STEEL POLES OF 9 TO 11 METERS INCLUDING

EXCAVATION OF PIT AND REFILLING OF EARTH, FIXING

OFCROSS ARMS, TOP FITTING CLAMPS ANTI-CLIMBING DEVICES,

DANGER BOARD, INSULATORS ETC. COMPLETE AND PAINTING

OF STEEL POLE, FABRICATED MATERIALS USED ON THE

POLEAND NUMBERING WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND

ERECTION OF STEEL POLE OF 13 METERS FOR RAILWAY

CROSSING ON BG/MG/NG LINE FOR 0.400/11/22KV OVERHEAD

LINES I.E INCLUDING EXCAVATION OF PIT & REFILLING OF

EARTH, FIXING CROSS ARMS, TOP FITTING CLAMPS,ANTI-

4 9926000004 CLIMBING DEVICES DANGER BOARD, INSULATORS ETC. No.

COMPLETE AND PAINTING OF STEEL POLES, FABRICATED

MATERIALS USED ON THE POLES AND NUMBERING WITH

COSTOF PAINT AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SETS AND EARTHING.

ERECTION OF DOUBLE POLE STRUCTURE OF 8 METERS 200 KG

PSC POLES INCLUDING EXCAVATION OF PITS & REFILLING OF

EARTHING, FIXING OF CHANNELS, SUPPORTING

ANGLES,CLAMPS, ANTI-CLIMBING DEVICES DANGER

5 9926000005 BOARDS,INSULATORS ETC.COMPLETE AND PAINTING OF No.

FABRICATED MATERIALS USED ON THE POLES AND NUMBERING

WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SETS AND EARTHING.(WITHOUT

ERECTION OF DOUBLE POLE STRUCTURE OF 9 TO

METERS.STEEL POLE INCLUDING EXCAVATION OF PITS &

REFILLING OFEARTH, FIXING OF CHANNELS, SUPPORTING

ANGLES, CLAMPS,ANTI-CLIMBING DEVICES DANGER BOARDS,

6 9926000006 INSULATORS ETC.COMPLETE & PAINTING OF No.

POLES,FABRICATED MATERIALSUSED ON THE POLES AND

NUMBERING WITH COST OF PAINTSAS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND

EARTHING.(WITHOUT AB SWITCH)

File No: DGVCLSDUR/MSC/e-file/4523/2026/0736/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTU

Letter No: DGVCLSDUR/0251/06/2026 Approved Date: 10-06-2026

ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF

AB SWITCH, HG FUSES OF 8 MTRS 200 KG PSC POLES

INCLUDING EXCAVATION OF PITS AND REFILLING OF

EARTH,FIXING OF CHANNELS SUPPORTING ANGLES, CLAMPS,

7 9926000007 ANTI-CLIMBING DEVICES, DANGER BOARDS, No.

INSULATORS,DOFUSES ETC. COMPLETE AND PAINTING OF

FABRICATED MATERIALS USED ON THE POLES AND NUMBERING

WITH COSTOF PAINT AS PER STANDARD SPECIFICATION BUT

EXCLUDINGOF ERECTION OF GUY SET AND EARTHING.(WITH AB

ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF

AB SWITCH,HG FUSES, 9 TO 11 METERS STEEL POLES

INCLUDING EXCAVATION OF PITS AND REFILLING OF EARTH,

FIXING OFCHANNEL, SUPPORTING ANGLES, CLAMPS, ANTI-

8 9926000008 CLIMBING DEVICES , DANGER BOARDS, INSULATORS, ETC. No.

COMPLETE AND PAINTING OF POLES FABRICATED MATERIALS

USED ON THE POLES AND NUMBERING WITH COST OF PAINT AS

PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF

GUY SET AND EARTHING.(WITH AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURES WITH MOUNTING

OFAB SWITCH, HG FUSES, TRANSFORMERS, LIGHTENING

ARRESTORS, DISTRIBUTION BOX. OF 8 METERS 200 KG PSC

POLES INCLUDING EXCAVATION OF PITS AND REFILLING OF

EARTH, CARTING OF TRANSFORMERS FROMSTORES TO SITE,

FIXING OF CHANNELS, SUPPORTING ANGLES,BRACINGS CROSS

ARMS CLAMPS, ANTICLIMBING DEVICES DANGER BOARDS,

CONDUCTOR AND CABLE WIRING ETC.COMPLETE AND PAINTING

OF FABRICATED MATERIALS USEDON THE POLES AND

NUMBERING WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND

ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF

AB SWITCH,HG FUSES TRANSFORMERS, LIGHTENING

ARRESTORS, DISTRIBUTION BOX 9 TO 11 METERS STEEL POLES

INCLUDING EXCAVATION OF PITS & REFILLING OF EARTH

CARTING OF TRANSFORMERS FROM STORE TO SITE, FIXINGOF

10 9926000010 CHANNELS SUPPORTING ANGLES, BRACING, CROSS No.

ARMS,CLAMPS, ANTICLIMBING DEVICES, DANGER

BOARDS,CONDUCTOR AND CABLE WIRING ETC. COMPLETE AND

PAINTING OF POLES FABRICATED MATERIALS USED ON THE

POLES AND NUMBERING AS PER STANDARD SPECIFICATION

BUT EXCLUDING ERECTIONS OF GUY SETS AND EARTHING.

ERECTION OF GUY SET INCLUDING EXCAVATION OF PITS &

REFILLING OF EARTH AS PER STANDARD SPECIFICATION WITH

11 9926000011 STAY CLAMPS, STAY WIRE, ANCHOR ROD, TURN BUCKLE, No.

EYEBOLT, GUY INSULATOR, CEMENT CONCRETE BLOCK ETC.

BUT EXCLUDING CONCRETING.

CONCRETING OF POLES, GUYS, ETC. INCLUDING COST OF

12 9926000012 CEMENT SAND METAL (1:2:4) AND WATER ETC. AS PER CMT

STANDARD SPECIFICATION.

ERECTION OF COIL TYPE EARTHING INCLUDING COST OF

13 9926000013 COAL,SALT ETC. BUT WITHOUT COST OF GI WIRE AS PER No.

STANDARD SPECIFICATION(20kg solt+20kg coal)

ERECTION OF GI PIPE/CI PLATE TYPE EARTHING

INCLUDINGCOST OF COAL SALT ETC. BUT WITHOUT COST OF

PIPE/GIPLATE GI WIRE AS PER STANDARD SPECIFICATION.(20kg

solt+20kg coal)

ERECTION OF STREET LIGHT FIXTURE COMPLETE WITH

CLAMPS, BRASS NIPPLE, BRASS HOLDER TECK WOOD

15 9926000015 BUSH,REFLECTORS FUSE, WIRING ETC. AS PER STANDARD No.

SPECIFICATION BUT EXCLUDING COST OF MATERIALS.

File No: DGVCLSDUR/MSC/e-file/4523/2026/0736/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTU

Letter No: DGVCLSDUR/0251/06/2026 Approved Date: 10-06-2026

STRINGING OF ALL TYPE OF CONDUCTOR (EXCEPT DOG

16 9926000016 CONDUCTOR) FOR 11/22KV & LT LINES INCLUDING FIXING OF

INSULATORS, BINDING JUMPERING ETC.

STRINGING OF GI WIRE 8 SWG INCLUDING BINDING JUMPERING

PROVIDING SINGLE PHASE SERVICE CONNECTION WITH PVC

4MM TWIN CORE CABLE FROM TERMINAL POLE TO METERING

18 9926000018 POINT INCLUDING FIXING OF METER WITH METER EARTHING No.

COMPLETE WORK AS PER STANDARD SPECIFICATION BUT

EXCLUDING COST OF MATERIALS.

PROVIDING THREE PHASE 4 WIRE SERVICE CONNECTION WITH

PVC 4MM2/10MM2 FOUR CORE CABLE FROM TERMINAL POLE TO

19 9926000019 METERING POINT INCLUDING FIXING OF METER WITH METER No.

EARTHING COMPLETE WORK AS PER STANDARD

SPECIFICATION BUT EXCLUDING COST OF MATERIALS.

ADDITIONAL COST FOR EXCAVATION OF PIT IN HARD ROCK

AREA FOR ERECTION OF POLE/ GUY ETC. AS PER STANDARD

SPECIFICATION OVER & ABOVE NORMAL COST COVERED

AGAINST EXCAVATION OF PIT UNDER NORMAL SOIL FOR

ERECTION OF POLE,GUY, DOUBLE POLE STRUCTURE EARTHING

WITH THE APPROVAL OF SUPDT.ENGINEER.

21 9926000021 PROVIDING GUARDING TO HT LINE ON ROAD/ RAIL CROSSING. MTR

22 9926000022 PROVIDING GUARDING OF LT LINES ON ROAD/RAIL CROSSING. MTR

23 9926000023 LT LINE TAPPING- SINGLE PHASE No.

24 9926000024 LT LINE TAPPING- THREE PHASE No.

LAYING OF OVER HEAD LT CABLE FOR ROAD CROSSING,HT LINE

25 9926000025 CROSSING AND TELEPHONE LINE CROSSING ETC.(PER SPAN) No.

ERECTION OF SINGLE POLE STRUCTURES WITH , HG

FUSES,TRANSFORMERS, LIGHTENING ARRESTOR,

DISTRIBUTION BOX. ON 8 METERS 200 KGAND PSC POLE

INCLUDING EXCAVATION OF PITS AND REFILLING OF EARTH,

CARTING OF TRANSFORMERS FROM STORES TO SITE, FIXING

OF CHANNELS, SUPPORTING ANGLES,BRACINGS CROSS ARMS

CLAMPS, ANTICLIMBING DEVICES DANGER BOARDS,

CONDUCTOR AND CABLE WIRING ETC.COMPLETE AND PAINTING

OF FABRICATED MATERIALS USED ON THE POLE AND

NUMBERING WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OFGUY SETS AND

ERECTION OF SINGLE POLE STRUCTURES WITH , HG

FUSES,TRANSFORMERS, LIGHTENINGARRESTOR, DISTRIBUTION

BOX. ON 9 to 11 METERS RSJ POLE INCLUDING EXCAVATION OF

PITS AND REFILLING OF EARTH, CARTING OF TRANSFORMERS

FROM STORES TO SITE, FIXING OF CHANNELS, SUPPORTING

27 9926000027 ANGLES,BRACINGS CROSS ARMS CLAMPS, ANTICLIMBING No.

DEVICES DANGER BOARDS, CONDUCTOR AND CABLE WIRING

ETC.COMPLETE AND PAINTING OF FABRICATED MATERIALS

USED ON THE POLE AND NUMBERING WITH COST OF PAINT AS

PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION

OFGUY SETS AND EARTHING.

ERECTION OF PSC POLES OF 10 *270 KG INCLUDING

EXCAVATION OF PIT AND REFILLING OF EARTH, FIXING OF

CROSS ARMS, TOP FITTING CLAMPS ANTI-CLIMBING DEVICES,

28 9926000028 INSULATORS ETC. COMPLETE AND PAINTING OF FABRICATED No.

MATERIALS USED ON THE POLES AND NUMBERING WITH COST

OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SET AND EARTHING.

File No: DGVCLSDUR/MSC/e-file/4523/2026/0736/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTU

Letter No: DGVCLSDUR/0251/06/2026 Approved Date: 10-06-2026

ERECTION OF DOUBLE POLE STRUCTURE OF 10 METERS 270 KG

PSC POLES INCLUDING EXCAVATION OF PITS & REFILLING OF

EARTHING, FIXING OF CHANNELS, SUPPORTING

ANGLES,CLAMPS, ANTI-CLIMBING DEVICES DANGER

29 9926000029 BOARDS,INSULATORS ETC.COMPLETE AND PAINTING OF No.

FABRICATED MATERIALS USED ON THE POLES AND NUMBERING

WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SETS AND EARTHING.(WITHOUT

STRINGING OF 100MM2 ACSR/100MM2 AAAC CONDUCTOR FOR

30 9926000030 LT LINES INCLUDING FIXING OFINSULATORS, BINDING

STRINGING OF DOG CONDUCTOR FOR 11/22KV HT LINES ONE COND

31 9926000031 INCLUDING FIXING OF INSULATORS, BINDING JUMPERING ETC.

ERECTION OF DOUBLE POLE STRUCTURES WITH MOUNTING OF

AB SWITCH, HG FUSES, TRANSFORMERS, LIGHTENING

ARRESTORS, DISTRIBUTION BOX. OF 10 METERS 270 KGAND

PSC POLES INCLUDING EXCAVATION OF PITS AND REFILLING OF

EARTH, CARTING OF TRANSFORMERS FROMSTORES TO SITE,

FIXING OF CHANNELS, SUPPORTING ANGLES,BRACINGS CROSS

ARMS CLAMPS, ANTI-CLIMBING DEVICES,DANGER BOARDS,

CONDUCTOR AND CABLE WIRING ETC.COMPLETE AND PAINTING

OF FABRICATED MATERIALS USED ON THE POLES AND

NUMBERING WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND

DISMENTALLING OF 8 MTR PSC POLE WITH CREDITING OF

33 9926000033 FABRICATION AT STORE & STACKING OF POLE SAFELY ON No.

ROAD SIDE OR CREDITING TO DEPARTMENTAL STORE

DISMENTALLING OF 10 MTR PSC POLE WITH CREDITING OF

34 9926000034 FABRICATION AT STORE & STACKING OF POLE SAFELY ON No.

ROAD SIDE OR CREDITING TO DEPARTMENTAL STORE

DISMENTALLING OF TRANSFORMER CENTRE (8 MTR PSC POLE)

(WITH TRANSFORMER) WITH CREDITING OF FABRICATION &

TRANSFORMER AT STORE & STACKING OF POLE SAFELY ON

ROAD SIDE OR CREDITING TO DEPARTMENTAL STORE

DISMENTALLING OF TRANSFORMER CENTRE (8 MTR PSC POLE)

(WITHOUT TRANSFORMER) WITH CREDITING OF FABRICATION

AT STORE & STACKING OF POLE SAFELY ON ROAD SIDE OR

CREDITING TO DEPARTMENTAL STORE

STRINGING OF LT ABC OF 1*35 SQ MM + 1*25 SQ MM INCLUDING

FITTING OF ALL ACESSARIES I.E. SPECIAL DESIGN SUSPENSION

/ TENSION CLAMP, FIXING OF CROSS ARM, LT SHACKLE

37 9926000037 INSULATOR ETC. FOR FIXING OF MESSENGER WIRE AND TO KM

PROVIDE SERVICE CONNECTION ON AERIAL BUNCH CABLE BY

INSULATED PIERCEING CONNECTORS THROUGH SERVICE

CONNECTION BOX COMPLETE AS REQUIRED & DIRECTED BY

ENGINEER IN CHARGE.

STRINGING OF LT ABC OF 3*50 SQ MM +1*25 SQ MM+1*35 SQ MM

INCLUDING FITTING OF ALL ACESSARIES I.E. SPECIAL DESIGN

SUSPENSION / TENSION CLAMP, FIXING OF CROSS ARM, LT

38 9926000038 SHACKLE INSULATOR ETC. FOR FIXING OF MESSENGER WIRE KM

AND TO PROVIDE SERVICE CONNECTION ON AERIAL BUNCH

CABLE BY INSULATED PIERCEING CONNECTORS THROUGH

SERVICE CONNECTION BOX COMPLETE AS REQUIRED &

DIRECTED BY ENGINEER IN CHARGE.

File No: DGVCLSDUR/MSC/e-file/4523/2026/0736/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTU

Letter No: DGVCLSDUR/0251/06/2026 Approved Date: 10-06-2026

STRINGING OF 11KV ABC OF 3*95 SQ MM +80 SQ MM INCLUDING

FITTING OF ALL ACESSARIES I.E. SPECIAL DESIGN SUSPENSION

39 9926000039 / TENSION CLAMP, FIXING OF CROSS ARM, BINDING TO PIN KM

INSULATOR,PREPARING SHACKLE POINT,JUMPERS ETC. AS

REQUIRED & DIRECTED BY ENGINEER IN CHARGE

STRINGING OF 22 KV ABC OF 3*70 SQ MM +95 SQ MM INCLUDING

FITTING OF ALL ACESSARIES I.E. SPECIAL DESIGN SUSPENSION

40 9926000040 / TENSION CLAMP, FIXING OF CROSS ARM, BINDING TO PIN KM

INSULATOR,PREPARING SHACKLE POINT,JUMPERS ETC. AS

REQUIRED AND DIRECTED BY ENGINEER IN CHARGE

STRINGING OF LT ABC OF 2*50 SQ MM +1*25 SQ MM+ 35 SQ MM

INCLUDING FITTING OF ALL ACESSARIES I.E. SPECIAL DESIGN

SUSPENSION / TENSION CLAMP, FIXING OF CROSS ARM, LT

SHACKLE INSULATOR ETC. FOR FIXING OF MESSENGER WIRE

AND TO PROVIDE SERVICE CONNECTION ON AERIAL BUNCH

CABLE BY INSULATED PIERCEING CONNECTORS THROUGH

SERVICE CONNECTION BOX COMPLETE AS REQUIRED &

DIRECTED BY ENGINEER IN CHARGE.

DISMENTALING OF RSJ (9/11 METER) POLE AND CREDITING THE

42 9926000042 OLD MATERIAL TO STORE No.

DISMENTALING OF TRANSFORMER CENTER ON 10MTR,270KG

PSC POLE(WITHOUT TRANSFORMER) WITH CREDITING OF

FABRICATION AT STORE AND STACKING OF POLE SAFELY ON

ROAD SIDE OR CREDITING TO DEPARTMENTAL STORE

DISMENTALING OF TRANSFORMER CENTER ON 10MTR,270KG

PSC POLE(WITH TRANSFORMER) WITH CREDITING OF

FABRICATION AT STORE AND STACKING OF POLE SAFELY ON

ROAD SIDE OR CREDITING TO DEPARTMENTAL STORE

DISMENTLING OF 11KV ABC OF 3*95 SQ MM +80 SQ MM AND

45 9926000045 CREDITING FITTING OF ALL ACESSARIES AND FABRICATION TO KM

DEPARTMENTAL STORE

DISMENTLING OF 22 KV ABC OF 3*70 SQ MM +95 SQ MM AND

46 9926000046 CREDITING FITTING OF ALL ACESSARIES AND FABRICATION TO KM

DEPARTMENTAL STORE

DISMENTALING OF LT ABC OF 1*35 SQ MM + 1*25 SQ MM AND

47 9926000047 CREDITING FITTING OF ALL ACESSARIES TO DEPARTMENTAL KM

DISMENTALING OF LT ABC OF 3*50 SQ MM +1*25 SQ MM+1*35 SQ

48 9926000048 MM AND CREDITING FITTING OF ALL ACESSARIES TO KM

DEPARTMENTAL STORE.

DISMENTALING OF LT ABC OF 2*50 SQ MM +1*25 SQ MM+ 35 SQ

49 9926000049 MM AND CREDITING FITTING OF ALL ACESSARIES TO KM

DEPARTMENTAL STORE.

RESTRINGING OF ALL TYPE OF CONDUCTOR (EXCEPT DOG

50 9926000050 CONDUCTOR) FOR 11/22KV & LT LINES INCLUDING FIXING OF

INSULATORS, BINDING JUMPERING ETC.

RESTRINGING OF DOG CONDUCTOR FOR 11/22KV HT LINES ONE COND

51 9926000051 INCLUDING , BINDING JUMPERING ETC.

LABOUR CHARGE FOR THE INSTALLATION OF NEW DTR METER.

52 9926000052 (METER WILL BE PROVIDED BY DGVCL) No.

LABOUR CHARGE FOR THE REPLACEMENT OF DTR METER AND

53 9926000053 OLD METER SHOULD BE CREDITED TO SDN STORE. (METER No.

WILL BE PROVIDED BY DGVCL)

LABOUR CHARGE FOR PROVIDING CT COIL FOR DTR METER

54 9926000054 CONNECTION. (CT COIL WILL BE PROVIDED BY DGVCL) PER CT

File No: DGVCLSDUR/MSC/e-file/4523/2026/0736/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTU

Letter No: DGVCLSDUR/0251/06/2026 Approved Date: 10-06-2026

LABOUR CHARGE FOR REPLACEMENT OF CT COIL FOR DTR

55 9926000055 METER CONNECTION AND OLD CT SHOULD BE CREDITED TO PER CT

SDN STORE. (CT COIL WILL BE PROVIDED BY DGVCL)

LABOUR CHARGE FOR FIXING OF MMB FOR DTR METER (MMB

56 9926000056 WILL BE PROVIDED BY DGVCL) No.

LABOUR CHARGE FOR REPLACEMENT OF DTR METER BOX.

57 9926000057 (METER WILL BE PROVIDED BY DGVCL) No.

PROVIDING / REPLACEMENT OF 1.5 SQ MM 10 CORE COPPER

58 9926000058 CABLE 3.5 METER (CABLE TO BE PROVIDED BY AGENCY) No.

LABOUR CHARGE FOR PROVIDING/RECONNECTION OF

59 9926000059 TERMINAL CONNECTION WITH PROPER SIZE OF LUGS. (LUGS

COST IS BORNE BY AGENCY) TERMINATION

LABOUR CHARGE FOR THE SPOT READING OF DTR METER WITH

DETAIL SURVEY OF DEFECT IF ANY. A DULY SIGN COPY BY

SURVEYOR PERSON OF AGENCY IN PRO-FORMA REPORT

60 9926000060 SHOULD BE SUBMITTED TO SDN OFFICE.(* ONLY IF ALL PER DTR

PARAMETER OF VOLTAGE, CURRENT & LOAD AS SHOWN IN

PER-FORMA IS FILLED) AS PER THE INSTRUCTION OF ENGINEER

LABOUR CHARGE FOR THE SPOT READING OF DTR METER WITH

DETAIL SURVEY OF DEFECT IF ANY. A DULY SIGN COPY BY

SURVEYOR PERSON OF AGENCY IN PRO-FORMA REPORT

SHOULD BE SUBMITTED TO SDN OFFICE. (DULY FILL PER-

FORMA IN FAULT CONDITION IN WHICH READING PARAMETER IS

NOT SHOWN IN METER)

INSTALLATION OF DTR METER INCLUDING METER BOX,

PROVIDING & FIXING OF 1.5SQ MM SINGLE STRAND 10 CORE

62 9926000062 ARMOURED COPPER CABLE (3.5METER), TERMINATION IN No.

METER & COIL ETC.(METER, METER BOX, C.T./P.T. COIL WILL BE

PROVIDED BY DGVCL)

INSTALLATION OF DTR METER INCLUDING METER BOX,

TERMINATION IN METER & COIL ETC. (WITHOUT 10CORE

63 9926000063 COPPER CABLE) (METER, METER BOX, C.T./P.T. COIL WILL BE No.

PROVIDED BY DGVCL)

Binding of messanger Conductorat with a distance not more than

64 9926000064 mtr with 6 turns minimum on XLPE Cable with single strand binding wire No

(including cost of binding wire)

Supply and Installation of 11/22 kV Distribution Transformers HT

65 9926000086 Terminal protector (UV Resistance) with using 95/120/150 sq.mm long PER SET

barrel aluminum lug. (1Set = 3 Nos i.e. on R, Y, B)

Supply & Installation of HT EPR Tap on 11/22 kV Distribution

Transformer with replacement of bare conductor by HT ABC conductor

66 9926000087 (DO bottom side to transformer) after removal of semi conductor by HT PER SET

ABC (6 inch both side). HT ABC to be supplied by DGVCL. (1Set =

Nos i.e. on R, Y, B)

Supply, Installation, Testing and Commissioning of Maintenance Free,

Ready Capsule, Pipe-In-Cage (Pic) Type, Earth Electrodes for HT

67 9926000088 Feeder Pole Having 2000 mm Electrode Length as per the Tender No

Specifications and Drawing. (All Materials Will Be Supplied By Agency)

Supply, Installation, Testing and Commissioning of Maintenance Free,

Ready Capsule, Pipe-In-Cage (Pic) Type, Earth Electrodes for HT

68 9926000089 Feeder Pole Having 3000 mm Electrode Length as per the Tender No

Specifications And Drawing. (All Materials Will Be Supplied By Agency)

File No: DGVCLSDUR/MSC/e-file/4523/2026/0736/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTU

Letter No: DGVCLSDUR/0251/06/2026 Approved Date: 10-06-2026

Supply and Installation of 25 X 3 mm GI Strip having hot dip-

galvanized-zinc coating of 80-100 microns without any joints or welding.

Both the end of the GI strip should be connected with GI nut bolts and

required fabrication work for giving separate earthing connections to(1)

Neutral of the transformer(2) MS structures of the transformer center

(Approximately 25 meter GI strip per transformer centre- as per

requirement and instruction of Engineer in- charge) (All Materials will be

supplied by Agency)

Supply and Installation of uPVC standard make Pipe of 1.25" diameter

for covering GI strip with UV protected Cable Ties of 550 X 7.6 mm size

70 9926000092 to bind with pole face(Approximately 25 meter uPVC pipe for GI strip Meter

covering per transformer centre -as per requirement and instruction of

Engineer in-charge.

Supply & fixing of upto 33 kV Conductor sleeve for Busbar to Drop out

71 9926000093 out fuse to Transformer H.T. including Busbar (12 mm sleeve) as per Per TC

specification. (All Materials will be supplied by Agency)

Supply & fixing of upto 33 kV Conductor sleeve for Busbar to Drop out

72 9926000100 out fuse to Transformer H.T. without Busbar (12 mm sleeve) as per Per TC

specification. (All Materials will be supplied by Agency)

Supply & fixing of upto 33 kV Conductor sleeve for Busbar to Drop out

73 9926000094 out fuse to Transformer H.T. including Busbar(15 mm sleeve) as per Per TC

specification. (All Materials will be supplied by Agency)

Supply & fixing of upto 33 kV Conductor sleeve for Busbar to Drop out

74 9926000101 out fuse to Transformer H.T. without Busbar(15 mm sleeve) as per Per TC

specification. (All Materials will be supplied by Agency)

Supply & fixing of Disc type Red Color FRP(Non-flammable) material

75 9926000095 resistant, Non-conductive bird guard OD=300 MM, ID=33 MM, Width No

side cut from ID to OD. (All Materials will be supplied by Agency)

Providing and fixing of LT Terminal protectors i.e. Re-useable boot (LT

76 9926000096 Side 1.1 kV) including LT (1.1 kV) insulating taps. All live part at LT side No

shall be covered with fixing of LT insulating taps.

77 Nylon Net around Transformer Center

77.1 9926000097 Nylon Net (12 * 15 ft) Per Net

77.2 9926000098 Nylon Dori Per TC

Labour charge for fitting Nylon Net (All fabricated material for fitting

77.3 9926000099 nylon net shall be provided by DGVCL) Per TC

1 9924000001 Cutting of Tree branches surounding HT/LT line Per Tree

Replacement of old jumpers & providing new double jumpers with 8"

binding [D Type] & capsuling with PVC pipe etc

3 9924000005 Support pole for Stay PSC/STP/RSJ No.

4 9924000006 Pin binding of conductor 11/22kv Pin insulator No.

Pin binding of conductor 11/22kv Pin insulator per pole in costle area

with cleaning .

6 9924000008 Pin binding of conductor LT shakel insulator No.

7 9924000009 Replacement of one/both disc.insulator at strain pole No.

8 9924000010 Replacement of LT shackle insulator at cut point No.

9 9924000011 Refixing of V cross Arm No.

File No: DGVCLSDUR/MSC/e-file/4523/2026/0736/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTU

Letter No: DGVCLSDUR/0251/06/2026 Approved Date: 10-06-2026

10 9924000012 Replacement of V cross Arm (With Transportation & Painting) No.

11 9924000013 Refixing of Top fitting in proper position No.

12 9924000014 Replacement of Top fitting No.

13 9924000015 Replacement of LT cross Arm No.

14 9924000016 Providing DO fuse on DP with carting & jumpuring(ONE DO FUSE) No.

Numburing of pole with paint by preparing back ground of one colour

and have lettering(height 3" * width 0.5") using stensil

16 9924000018 Fixing of MMB(1PH.) at consumer end No.

17 9924000019 Fixing of MMB(3PH.) at consumer end No.

18 9924000020 Replacement of (1ph.) meter for Urban area No.

19 9924000021 Replacement of (1ph.) meter for Rural area No.

painting consumer no. on MMB (Urban) (with letter size height 40mm*

painting consumer no. on MMB (Rural) (with letter size height 40mm*

22 9924000024 Replacement of deteriorated Single phase Service line No.

Fixing of new dist. Box with complete wiring including clamps,nut bolts

Reparing of guarding involving reshaping of bearer wire cross lacing

25 9924000027 Painting of steel fabricated material of RSJ DO DP structure with paint No.

Painting of steel fabricated material of RSJ pole mounted transformer

double pole structure with paint

27 9924000029 Painting of steel fabricated material of RSJ single pole with paint No.

painting of steel fabricated material of PSC Single pole (HT line) with

painting of steel fabricated material of PSC DO DP double pole with

painting of steel fabricated material of PSC double pole at pole mounted

transformer with paint

31 9924000033 Providing line seperater single phase No.

32 9924000034 Providing line seperater three phase No.

Replacement / Providing of stay insulator along with adjustment of

tension in stay wire

Replacement of deteriorated /providing LT dist. Box with new up to

34 9924000036 100KVA capacity & crediting it to store. No.

Replacement of deteriorated /providing LT dist. Box with new above

100KVA capacity & crediting it to store.

36 9924000038 Adjustment of tension in stay wire No.

37 9924000039 Refitting of LA No.

Converting pin point to Shackle point including dismentaling &

38 9924000040 location

restringing etc.

replacement of 11KV Pin insulator with providing new double pin

replacement of 22KV Pin insulator by new 11kv pin insulator with

spares & providing new double pin binding

41 9924000043 Providing 11kv double disc insulators with binding & restringing No.

Replacement of existing 11kv conductor (all size) with new double pin

43 9924000046 Plumbing of PSC Pole with straightening at pin point No.

44 9924000047 Plumbing of PSC Pole with straightening at tension point No.

Plumbing of tilted DP structure (PSC/RSJ/STP) with refilling of stone

File No: DGVCLSDUR/MSC/e-file/4523/2026/0736/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTU

Letter No: DGVCLSDUR/0251/06/2026 Approved Date: 10-06-2026

Providing new 11kv AB /GO switch with fabrication and insulated colour

code jumper, binding, lugs etc

Replacement of old 11kv AB /GO switch with providing new insulated

jumper, binding, lugs etc

Providing cage type loop guard in verticle LT line with using PVC reel

48 9924000052 insulators etc per pole

Labour charges for replacement /providing of MMB & service with all

accessories for three phase connection

Labour charges for replacement /providing of MMB & service with all

accessories for single phase connection

Dismentalling of existing Dist.X'mer center(RSJ /STP POLE)

51 9924000055 25/63/100/200 KVA with all fabrication & creditig the old material to No.

52 9924000056 Disconnection from LT pole 1 phase No.

Reconnection from LT pole 1 phase

53 9924000057 ( payment after receipt of R/C charges) No.

54 9924000058 Disconnection from LT pole 3 phase No.

Reconnection from LT pole 3 phase

( payment after receipt of R/C charges)

Dismentaling & removing of service line from pole & crediting to S/dn (1

Dismentaling & removing of service line from pole & crediting to S/dn (3

58 9924000062 Reconnection of service line complete with PVC cable (1 Ph) No.

59 9924000063 Reconnection of service line complete with PVC cable (3 Ph) No.

Providing spiral type earthing by G.I. NO 8(weight 2kg -5mtr in length)

with salt and coal 10kg each, including pvc rigid pipe 20mm dia( 1.5mtr

length) to pass exposed part of G.I. wire at consumer end with all

materials, earth resistance should be less than 2 ohms

Providing and fixing of signle core 1.5 sq mm single strand copper

insulated cable with cable nail clip for spiral type earthing at consumer

end. The end of G.I. no 8 is to be connected by connector with copper

61 9924000070 cable of which other end shall be connected to the earth terminal of per meter

meter box. This item shall be used in location where there is more

distance between earth terminal and earthing terminal of meter. (All

materials supplied by contractor)

Stringing of LT ABC of 1*35 SQ MM + 1*25 SQ MM including fitting of

all acessaries i.e. special design suspension / tension clamp, fixing of

cross arm, LT shackle insulator etc. for fixing of messenger wire and

62 9924000065 inclusive of dismantling charge of existing bare conductor and crediting KM

in to store & dismentaling of service line from LT bare conductor and to

provide service connection on Aerial Bunch Cable by insulated pierceing

connectors through service connection box complete as required &

directed by Engineer in Charge.

Stringing of LT ABC of 3*50 SQ MM +1*25 SQ MM+1*35 SQ MM

including fitting of all acessaries i.e. special design suspension / tension

clamp, fixing of cross arm, LT shackle insulator etc. for fixing of

63 9924000066 messenger wire and inclusive of dismantling charge of existing bare KM

conductor and crediting in to store & dismentaling of service line from

LT bare conductor and to provide service connection on Aerial Bunch

Cable by insulated pierceing connectors through service connection box

complete as required & directed by Engineer in Charge.

File No: DGVCLSDUR/MSC/e-file/4523/2026/0736/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTU

Letter No: DGVCLSDUR/0251/06/2026 Approved Date: 10-06-2026

Stringing of 11KV ABC of 3*95 SQ MM +80 SQ MM including fitting of

all acessaries i.e. special design suspension / tension clamp, fixing of

cross arm, binding to pin insulator,preparing shackle point,jumpers etc.

and inclusive of dismantling charge of existing bare conductor and

crediting in to store complete as required & directed by Engineer in

Stringing of 22 KV ABC OF 3*70 SQ MM +95 SQ MM including fitting of

all acessaries i.e. special design suspension / tension clamp, fixing of

cross arm, binding to pin insulator,preparing shackle point,jumpers etc.

and inclusive of dismantling charge of existing bare conductor and

crediting in to store complete as required & directed by Engineer in

Stringing of LT ABC of 2*50 SQ MM +1*25 SQ MM+ 35 SQ MM

including fitting of all acessaries i.e. special design suspension / tension

clamp, fixing of cross arm, LT shackle insulator etc. for fixing of

messenger wire and inclusive of dismantling charge of existing bare

conductor and crediting in to store & dismentaling of service line from

LT bare conductor and to provide service connection on Aerial Bunch

Cable by insulated pierceing connectors through service connection box

complete as required & directed by Engineer in Charge.

1. DGVCL will provide key material like M.S. materials,ABC/Bare

conductors,PSC/RSJ Poles,Insulators,Fabricated materials etc. to the

2.All fabricated items shall be fabricated as per DGVCL approved

drawing and by welding rods confirming to the relevent ISI specification

and as directed by Engineer in charge.

3.Necessary electricity connection for fabrictated items shall be

provided by DGVCL on payment of required charge for connection &

electricity bill of the same shall be paid by the agency.

4.All the rates are inclusive of PF and Exclusive of GST applicable time

5.All steel material are to be painted as below:

(a) Scrubbing of rusted surface properly before applying the paints on to

the RSJ poles & steel fabricated materials of RSJ/PSC poles is must

(b) Two coats of approved ISI mark red oxide (primer) is to be properly

painted for the RSJ poles & steel fabricated materials of RSJ/PSC

(c) Two coats of approved ISI mark silver paint (i.e. triple mangoes or

equivalent quality silver paint) is to be properly painted on to the RSJ

poles & steel fabricated materials of RSJ/PSC poles.

Executive Engineer

Sachin Division, Surat

File No: DGVCLSDUR/MSC/e-file/4523/2026/0736/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTU