Repair and Maintenance of Electrical Installation and street lighting system and improvement of illumination including replacement of damaged fittings by LED fittings at FSD Buniadpur.

Cat (A) -Items to be supply and installation

Dismanling and Refixing of 20 mm steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. 20 mm

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. 20 mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel / PVC conduit as required. 3 x 1.5 sq. mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel / PVC conduit as required. 4 x 1.5 sq. mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel / PVC conduit as required. 5 x 1.5 sq. mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel / PVC conduit as required. 6 x 1.5 sq mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel / PVC conduit as required. 7 x 1.5 sq mm

Supply of following type of XLPE POWER CABLE of 1.1 kv grade armoured Al. cable compulsory ISI mark confirming to IS:7098/ PART –I / 88 with amendment no.1. CABLE SIZE 4 X 16 SQ.MM

Laying and fixing of one No. PVC insulated & PVC sheathed/XLPE al conductor cable of 1.1KV grade of following size on the wall surface as reqd. Upto 35 sq. mm (clamped with 1mm thick saddle)

Laying of one no PVC insulated and PVC sheeted power cable with 7/18 stay wire with sutable clamp as required for cable size of upto 35 sqmm.

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. (a)63 mm dia (OD- 63 mm & ID-51 mm nominal)

Supplying and fixing of light class G.I. pipe of 50 mm dia.(nominal) 3 metres length along the pole for protection of under ground cable as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Upto 35 sq. mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required 4X16 sq mm (28mm)

Supplying and fixing 4 way (4 + 12), Double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator).

Supplying and fixing 6way double door, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator).

Supplying and fixing 5 A to 32 A rating, 240/415 volts, 10 KA "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

Supplying and fixing 5 A to 32 A rating, 240/415 volts, 10 KA "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole and neutral

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

Supplying and fixing 5/6 amps switch make piano type/tumbler switch/ socket on the existing switch box/ cover including connections etc. as required.

Removing of 4 feet industrial LED/ Flourecent fitting with disconnetion from truss/ wall as required as direction of Engineer-in-charge.

Supply, installation,testing commissioning of 40W LED tube light fitting of including all accessories i.e., installation of Led tube on wall/truss with round block, screw etc as required .(As per NABL certified ISO/IEC specification)

Supply, installation,testing commissioning of 80W Integrated LED Well glass luminaries comprises of die cast canopy,control gear, housing with 08 mm MS bar of 1.5mtr length. (As per NABL certified ISO/IEC specification)

Supplying, installation, testing and commissioning of LED flood light fitting 150 watt made up of pressure die cast aluminium housing with toughened glass and high power LEDs and secondary lenses with IP 66 Protection complete with all accessories etc. (As per NABL certified ISO/IEC specification)

Supply of LED street light fitting of 45 watts, Pressure die cast Al. housing with toughened glass and high power LEDs and secondary lenses with IP 66 protection complete with all accessories. (As per NABL certified ISO/IEC specification)

Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required

I/T/C of prewired street light fittings complete with all accessories on the existing G.I. pipe bracket on pole /wall including wiring & connections as required.

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Repairing of Timer panel of Higmast Tower with disnantling of contractors and timer swith and fixing new one number 32 A MNX Contractor and two number 9A MNX contractor and new 24 hours timer switch, auto/manual rotary/ toggle switch including all connection etc. as required.

Lowering of Lantern carriage of 16.00 M high Mast and resting on stay stud of the High mast and disconnection and remove all LED fittings. Unbolting the foundation bolt and dismantling of 16 metre High Mast tower by using hydra/crane. Adjust the rope wires as required, Erection the High Mast Tower to same by using hydra/crane and bolting all foundation bolt. Refixing and reconnection all LED fittings. Hoisting of lantern carriage of 16 M High mast by means of motor driven tools, commissioning the High Mast as per direction of Engineer in-charge.

SITC of weather proof 40 Watt post top lantern having improved horizontal uniformity with reduced glare and improved lighting control(As per NABL certified ISO/IEC specification)

Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.

Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required.

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run)

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run)

Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.

Cat (B) -Buy Back Items

Less credit for dismantaled old damaged Single pole MCB 6 to 32 Amp

Less credit for dismantaled old damaged 5/6Amp piano/round type switch

Less credit for dismantaled old damaged 18/20W LED Batten