SPECIAL REPAIR TO AIRMEN BILLETS AND AIRMEN MESS, CERTAIN REVENUE AND MINOR WORKS AT AF STN WADSAR

Amount

Dismantling of floor hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L for 15 mm thick screed bed or bedding layer of morter for laying floor finishes CM 1:6 complete all as specified and directed

M&L for Non- skid Ceramic coloured joint free tiles 7 to 8mm thick (square/Rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L glazed ceramic coloured digital tiles 450x300mm x 7mm thick in vertical surface etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including backing coat of CM 1:4 10mm thick etc complete all as specified and directed.

Taking down cement or cement lime plaster any description on brick or stone wall/ celling including raking out joint, haking for key scrubing with water etc complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of concrete or block masonary CM 1:6 finished even and smooth (without using extra cement) in internal surface of wall complete all as specified and directed.

All as per item No 6 here in before but 10 mm tnick CM 1:6 and setting coat 5mm thick CM 1:4 mixed with WPC in external surface of wall including scaffolding complete all as specified and directed. Note:- WPC measured and paid in relevant item of this schedule.

All as per item No 6 here in before but 5 mm thick in ceiling surfaces CM 1:4 complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed

M&L for preparation of new plastered surface of wall and applying two coats of distemper oil emulsion over a coat of primer over a sufficent coat of Birla wall putty.

M&L for preparation of new plastered surface of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed.

Taking out existing unserviceable plaster, loose unsound weaken cement concrete of any description and in any position from existing surface of RCC roof slab/ RCC facia/ beams/ columns/ RCC chajja, average depth 25mm (approximate 6.5 mtrs height from natural GL) with power driven pneumatic chiesel and removal of debries upto a distence 500 mtrs out side MD land including saw cutting of all edges, making square shoulders of cavaties and roughening of smooth surface, scraping out and removing corrosion and all loose scales, rust etc. from the visible reinforcement and cleaning the steel reinforecement properly providing NIT zink primer to form a contineous film and preparing the surface to receive concrete of epoxy grouting mortar etc. including providing necessary scaffolding complete all as specified and as directed.

M&L for applying bonding coat of modified styrene butadene emulsion in proportion 1 part (bonding agent) : 1 part (water) : 3 part (OP cement) by volume with the brushes etc. to bind new cement plaster/ polymer modified plaster/ concrete/ screed concrete with oldsurface including removal of loose/ distengrated old concrete/ plaster including preparation of surface etc. complete all as specified and as directed.

M&L for applying 25-35mm average thickness plaster on ceiling slab and chajja projections, facia and beams with polymer modified mortar firtified with SBR in proportion 1 part (cement) : 3 part (sand) by weight of cement with 11 to 15 ltrs water addition, finishing surface to match with existing adjoining surface complete all as specified and as directed.

Taking up or down 15mm dia steel tubing and connection including cleaning for refixing or complete all as specified and as directed.

All as per tem No 16 here in before but 20 mm dia complete all as specified and as directed.

S&F 15 mm dia steel tubing medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed.

All as per tem No 18 here in before but 20 mm dia complete all as specified and as directed.

S&F in repair Fancy type CP Long shunk bib taps 15 mm dia, chromium plated cast copper alloy with half turn type capstan heads, screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair Fancy type CP stop/angular cock 15mm dia cast copper alloy, chromium plated fency type screwed down high pressure with half turn type capstan heads, screwed both end for iron pipe or for unions and fixed complete all as specified and directed.

S&F 32mm CP Brass bottle traps for wash basins with inlet and outlet screwed for pipe or connection including necessary packing, union and cap and fixed complete all as specified and directed.

S&F in repair 75 mm dia outlet CI nahani trap plain with S/S grating including jointing with solvent cement complete all as specified and directed.

S&F in repairs under counter wash basin size 580X430 mm white, excluding taps, waste ,chain and plug and chain porcelain stopper but including brackets cutting for and pinning in ends of brackets or erecting stand in slab complete all as specifeid and directed.

S&F 15 mm dia pillar tapes long shunks, Fancy type of Chromoum Plated brass with half turn type capstan heads screwed down high pressure, with or without lettered hot and cold with long shank, screwed shanks and fly nuts, screwed for iron pipes or for WHB complete all as specified and directed.

S&F in repair 125 mm dia Fancy type CP shawer rose complete all as specified and as directed.

S&F SS shop dish of size 100mm complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) in all respect complete all as specified and as directed.

Supply and fixing PVC valveless, syphonic action type flushing cistern, 10 ltr capacity, low level, white, with inlet, ball valve, float and handle including bracket, complete all as specified and directed.

Supply and fix in repair chromium plated Tubular towel rail, 20mm dia, D type, 60cm long including bracket/flanges complete all as specified and directed.

S&F PVC water connection 600 mm long to wash basin of 15mm dia including PTMT nuts and washers complete all as specified and as directed by Engineer-in-Charge.

S&F PVC water connection 450 mm long to wash basin of 15mm dia including PTMT nuts and washers complete all as specified and as directed by Engineer-in-Charge.

Taking dawn CI pipe 100mm/75mm of any description complete all as specified and as directed by Engineer-in-Charge.

S&F for CI waste and vent pipes in any length with or without ears, fixed to wall dia of pipe 100mm complete all as specified and as directed by Engineer-in-Charge.

All as per item No 34 here in before but 75mm dia in floor complete all as specified and as directed.

S&F 100mm cast iron sanitary connection-short connection pipe of length upto 300-450mm socket to fit WC out-let etc complete all as specified and as directed.

S&F 75mm cast iron sanitary connection-short connection pipe of length upto 300-450mm socket to fit WC out-let etc complete all as specified and as directed.

M&L for bends of any type radius diminishing pieces or tapes ( large bore measured) of 75mm dia bore with oval access doors etc complete all as specified and as directed.

S&F cast iron bend 100mm bore (any radius) dimnishing pieces or tapers with oval access doors etc complete all as specified and as directed.

M&L for branch pices single (equal and unequal) ordenary or incerted (spigot or socket type) or with parallel branch of 75mm dia with oval access door complete all as specified and directed.

S&F 100mm bore Branch piece, single (equal or unequal ) ordinary or inverted (spigot or socket type) with parallel branches with oval access door complete all as specified and directed.

S&F CI cowls of 100mm complete all as specified and as directed.

Taking down chowkats or frame exc 1.5 Sqm and n exc 4Sqm each (without taking off shutter from the frame) complete all as specified and as directed.

Taking down chowkats or frame n exc 1.5 Sqm each (without taking off shutter from the frame) complete all as specified and as directed.

S&F for aluminium ventilator, louvers type, frame top & bottom of size 31x42x1.60mm (section No 20558) rectangular tub of size 40x20x2mm (section No 14019 and middle vertical of size 42x46.20x1.60mm Section (20560) and clip for fixing wire mesh and glass of size 19x17.30x0.90mm (section No 19360) thick including stainless steel wire cloth 0.36mm nomonal dia of wire and 1.40mm average width of aperture and fixed with stainless steel wire staples and supply and fixing 5mm thick forsted/pinheaded glass louvers with blades of 100mm heavy duty with necessary rubber beading, gasket etc complete all as specified and as directed by Engineer-in-Charge.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification and drawing complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F 75mm long SS butt hinges and fixed to frame with scrwewd or welding complete all as specified and as directed.

S&F for 200mm long aluminium anodized barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F aluminium alloy anodized sliding door bolt with haps and staple (bolt type) and fixing clip of sheet cast or extruted section or cast aluminium alloy and fixed length of bolt 300mm complete all as specified and as directed.

S&F for 150mm long aluminium handle cast type anodized complete all as specified and as directed by Engineer-in-Charge.

S&F Framed work such as grills, gratings, purline, rafters, column square/ rectangular, round or angle section etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed by Engineer-in-Charge.

Supply only intergral water proofing compound.

S&F 50mm dia bore pipe low density LDPE fixed to wall, ceiling or in floors etc complete all as specified and as directed.

S&F in repairs vitreous china water closet orissa pattern, size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and as directed.

S&F in repair Health faucet (ABS) with rubit cleaning system 1.05m long PVC flexible tube & ABS wall hook complete all as specified and as directed.

S&F in repair 75 mm dia bore pipe PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 75 mm dia bore PVC (SWR) bends any radius complete all as specified and directed.

Demolition of wall of brick and stone wall built in cement mortor incl all quoins, archs, pillars, etc complete all as specified and as directed.

M&L for brick work sub class B bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

Demolition of reinforced cement concrete (reinforcement cut as requried to facilitate) complete all as specified and directed.

M&L for mild steel TMT bars 6 to 8mm dia and cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire(annealed ) n less than 0.9mm dia or securing with clips and including welded with new reinforcement to existing reinforcement and grouting of beams/ columns/lintels etc complete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) Type B-1 1:2:4 (using 20mm garded stone aggregate) as in as slab suspended slab, chajjas, facia, shalves , plateform and the like complete all as specified and directed

Dismantling plain or corrugated steel sheet, any gauge, thickness roof covering/ fibre sheets etc complete all as specified and directed.

S&F in repair Pre- Painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws/ L type or J type cranked hook bolts where as required in lieu of screw complete all as specified and directed.

S&F in repair Pre- Painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws/ L type or J type cranked hook bolts where as required in lieu of screw complete all as specified and directed.

S&F mild steel steel sections for wind tie for roof including securing bolts including cutting, drilling holes notching for wire flat iron fillets and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid and bedded and pointed in any mortar complete all as specified and as directed.

M&L for Green marble tiles 15-20 mm thick machine cut, beded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of Marble slab including cutting and polishing and nosing and polishing of the free or front edge of the slab in shelves, platform, window cills etc complete all as specified and as directed in Engineer -in -Charge.

M&L for machine cut kota stone slab flooring 20 - 25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including backing coat complete all as specified and directed.

M&L for Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed by Engineer- in - Charge.

S&F for urinal spreader of PTMT any colour for fixing with 15 mm dia pipe complete all as specified and as directed by Engineer -in -Charge.

Dismantling water tanks and exc 500 but not exc 1000 litre capacity complete all as specified and as directed.

S&F rotational moulded water storage tank 1000 ltr capacity double layer (cylindrical vertical with closed top) hoisted with PVC cover thread with suitable lock arrangments and fixed in position complete all as specified and directed.

S&F in repair 20mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

M&L for 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, kiln seasoned and chemically pressed treated and complete all as specified and directed by Engineer- in - Charge.

M&L Aluminium powder coated (powder coated of requried colour) three track sliding windows frame top & sides of size 92x31.75x1.50mm (section No 20831), bottom size 92x31.75x1.50mm (section No 20832) and shutter top & bottom of size 40x18x1.55mm (section No 20736) and sides (handle) of size 40x18x1.55mm (section No 20738) and lock side shutter frame of size 40x18x1.45mm ( section No 20737)" with rubber gasket, beading and locking arrangement and rollers etc including making good to the disturbed portion complete including stainless steel wire mesh 0.36mm nominal dia of wire with 1.40mm average aperture and fixed with stainless steel wire staples and fixing 5mm thick glass with necessary rubber beading gasket etc complete all as specified and as directed.

S&F aluminium powder coated (requried colour to match window colour) grill of 5 mm dia squares rectangular triangular circular shape aperture n.exc 7.00 cm in length or width fixed with H or F channel complete all as specified and directed.

M & L for Aluminium doors, powder coated (of approved colour), with frame of section 100 x 44mm x 2.5mm thick and shutter with bottom rail of section 150 x 44.5 x 2.5mm thick, middle rail of section 85 x 44.5 x 2.5mm thick and top rail of section 80.4 x 44.5 x 2.5mm thick and styles of section 80.4 x 44.5 x 2.5mm thick with 5mm thick glass (plain/tinted/with laminated film) or prelaminated board fixed in position with aluminium beading including necessary rubber gaskets and 2 Nos. aluminium push plate handle of aluminium section 150mm wide and 2.5mm thick including 150mm aluminium tower bolt, brass mortice lock complete all as per Drawing No. CEAA/TD/63 sheet No. 2.2 complete all as specified and directed.

M&L for Non- skid Ceramic coloured tiles 7 to 8mm thick (square /Rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-in- Charge.

S&F Stainless steel grating with or without hole of size 150 mm complete all as specified and directed.

S&F in repair PVC waste pipe of 32mm dia complete all as specified and directed.

Excavation in trenches not exc 1.5 mtr wide and n.exc 1.5 mtr depth for foundation etc or for shafts, wells, cesspits, manhole, pier holes not exc 10 Sqm on plan and not exc 1.5 mtr depth and getting out in soft/loose soil complete all as specified and directed.

M&L Cement concrete in foundations, filling and mass concrete 1:4:8 (40 mm graded stone aggregate) type D-2 complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in foundation of posts and pillars etc complete all as specified and directed.

M&L for pre cast cement concrete (Type C1 1:3:6) block masanory with solid blocks, exc 10cm in width and setting in cement mortar (1:6) complete all as specified and directed.

M&L rendering 15 mm thick in CM 1 : 4 on fair faces of concrete, brick surfaces including finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for Hard core( broken stone or boulders) of guage n exe.63mm deposited, spread and levelled in layers n exe. 15 cm thick watered and rammed to a true surface complete all as specified and directed.

M&L for 75 mm thick PCC type D-2 ( 1:4:8)( by using 40 mm grade aggregate) as in sub base of floor/path complete all as specified and directed.

M&L for 75 mm thick cement concrete type B-1 (1:2:4) (by using 20 mm grade aggregate) complete all as specified and directed.

Returning, filling in soils, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.

Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., n exc. 1.5 m high from base (Earth obtained from site) complete all as specified and directed.

Rough excavation not exceeding 1.5 m deep and getting out in soft/loose soil complete all as specified and directed.

Removing excavated materials (Soil) not exceeding 50 mtrs away and depositing where directed at a level not exceeding 1.5 mtrs above the starting point complete all as specified and directed.

S&F Welded steel wire fabric supplied and fixed complete to steel members of weight not exceeding 4 kg per sqm complete all as specified and directed.

M&L for preparation of new wall surfaces and applying three coats of white wash complete all as specified and directed.

M&L Preparation of new steel surface of any description 10cm width or girth not other wise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer complete all as specified and directed.

M&L for formwork of columns rough finished surfaces of concrete complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out complete all as specified and directed.

M&L sand cushoining laid over sub base for fixing interlocking tiles (25 mm thick sand for interlocking tiles) and clean dry sand for cable cushioning including gently punning down complete all as specified and directed.

M&L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment etc complete all as specified and directed.

M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

S&F aluminium partition made with aluminium anodised section 62.30mm x 44.45mm x 1.50mm fixed in wall including provision for receiving glass pane etc and fixing the same with aluminium anodised beading and rubber gasket including 5.0mm thick glass (black/ tinted/ plain) and all necessary fittings complete as in partition complete all as specified and as directed.

M&L for mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L in repair for point wiring complete with 1.5 Sqmm single core PVC insulated and unsheathed multi stranded copper conductor cable 1100 volt grade, (FRLS) through and including 20X12 mm PVC casing-n- copping and its accessories, cadmium screws and including 1.5 Sqmm single core PVC insulated and unsheathed multi stranded copper conductor cable(FRLS) as earth continuity conductor and MS boxes made of 16 gauge MS sheet concealed type on walls cover 3mm thick for housing complete all as specified and as directed for the following :- (a) One light/fan point controlled by one on way switch

All as per item No 106 here in before but one socket outlet 05 Amps on the same board

All as per item No 106 here in before but one socket outlet 05 Amps on independent board

All as per item No 106 here in before but point wiring with 2.5 Sqmm cable and 2.5 Sqmm earth continuity conductor for 3 pin 15 Amp socket complete all as specified and as directed

S&F in repair Switch piano, single pole one way 5 Amps 240 volt capacity flush type complete all as specified and as directed.

S&F in repair 3 pin 5 Amps Socket outlet, flush type complete all as specified and as directed.

Supply and fix in repair 3 pin 15 Amps switch socket combination, flush type multi purpose 2 in 1 type (3 pin 5 Amps and 15 Amps) complete all as specified and as directed.

S& F in repair ceiling rose, 5 Amps surface type 240 volts bakelite three terminal complete all as specified and as directed.

Supply and fixing in repair LED flood light 70 watt 230 VAC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed.

Supply and fix exhaust fan, steel body AC single Phase 230V of size 450 mm sweep heavy duty with, blades, and frame and louvers complete all as specified and as directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m complete all as specified and as directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete incl all fixing accessories complete all as specified and as directed.

S&F in replacement of miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP 240V, 10 KA 'C' curve, in the DB Complete with connection testing and commissioning complete all as specified and as directed.

All as per item No 118 here in before but SP 40 AMP capacity.

S&F in repair 8 way sheet metal enclosures for flush/surface mounting distribution board double door, 240 volts factory made and tested complete, suitable for mounting MCBs with 200 Amps rated bus bar, cable lugs complete all as specified and as directed.

M&L in repair for sub main wiring of two run with 04 Sqmm single core PVC insulated, FRLS, flexible multi stranded copper conductor cable 1100 volts grade, drawn through and including PVC casing-n-capping of size and one run of same size copper cable as earth continuity conductor in green color complete all as specified and as directed Incl taking down old u/s sub main wiring. Note- Two runs of single core cable with one run of earth continuity cable including PVC casing-n-capping and its accessories will be measured and paid as one unit.

S & F in replacement of LED batten fitting alongwith removable LED Tube 20W, 230 Volt, 6000K, wall /ceiling mounted ,LED batten fixed by means of bolts,ABS rotor suitable for single side connections. LED rod having glass material complete haivng lumen efficacy minimum 100 lm/w,CCT 6500 K, powered by integral constant current driver suitable for 240 V AC with all accessories internallly prewired including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed Incl taking down old u/s one.

Supply and fixing in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed Incl taking down old u/s one.

M&L for Supply, laying & testing cable XLPE insulated, screened ,PVC bendded galvanized steel strip or wire armoured electric power cables (heavy duty) with stranded aluminium conductor 1100 volts grade, of size 25 sqmm 3.5 core complete all as specified and directed.

M&L for Supply, laying & testing cable XLPE insulated, screened ,PVC bendded galvanized steel strip or wire armoured electric power cables (heavy duty) with stranded aluminium conductor 1100 volts grade, of size 16 sqmm 2 core complete all as specified and directed.

M & L for bricks laid in trenches for cable protection, well burnt sub class ‘B’, abutting each other width equal to length complete all as specified and directed.

M & L for boring of holes up to 80 mm dia under road pavement, hard standing, etc by trench- less technology using ultra sound technique complete all as directed by Engineer-in- charge. Note:- Pipe for protection of cable shall be measured and paid separately.

S&F light grade GI tubing of 40mm bore for cable protection in wall/trench complete all as specified and directed.

Supply & fix in repair bus bar chamber of rating 200 Amps TPN factory made dust and vermin proof including bus bar of rectangular cross section of copper strip supported on cast epox insulator at suitable interval heat shrinkable sleeves with powder colour code 01 set of 04 strip of complete with grouting in wall with suitable FI strip bend to shape with PCC work for holding enclouse and complete all as specified and directed. Make: Havells, cat part No IHBB020006, 6 way or equivalent as approved by GE.

S&F in repair looping box (enclosures) of size 280 x 170 x 130 mm made of PVC comprising of 02 Nos aluminium bus bar 100 Amps rating fixed on porcelain insulators, earthing terminal and one MCB SP 6/16 Amp including MS bracket, nut an bolts complete all as specified and directed.

S&F in repair On load change over switch with sheet metal Enclosure 63 amp, 4 pole, including necessary cable connections.

S&F in repair 12 way sheet metal enclosures for flush/surface mounting distribution board double door, 240 volts factory made and tested complete, suitable for mounting MCBs with 200 Amps rated bus bar, cable lugs complete all as specified and directed.

S&F in repair miniature circuit breaker (MCB) of TPN and current carrying capacity 40 to 100 A 415V, 10 KA 'C' curve, in the DB Complete with connection testing and commissioning complete all as specified and directed.

All as per item No 133 here in before but SPN 40 to 63 AMP 10 KA.

S&F LED light fitting 2x16 watt flame proof, CMRI certified recommended for gas/vapor group of IIA and IIIB, zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. complete with all accessories prewired and including coneecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed.

Supply, install,commissioning and testing Invertor type 5 star rated (MIN EER-3.8) air cooled split unit air conditioner electric driven single phase of capacity of 1.5 TR,Eco friendly refrigerant, hi wall split units indoor/outdoor unit complete with cordless remote control unit and auto restart facility, 100 % copper and stabilizer free operation, including excess copper tubing if required beyond the length supplied with AC unit and PVC conduit of 15mm dia not exceeding 2.5 mtr long for water drain and making good to disturbed surface with cement mortar ratio of 1:3 and testing complete all as specified and directed by Engineer-in-charge. Note:- (i) Rate quoted for items includes cost of all civil work like cutting to wall ceiling, floor, filling with PCC, finishing the surfaces with existing to match etc, if required for installation of AC unit as directed. (ii) Required copper pipes for installtion shall be deemed to be included in the quoted rates

M&L for concealed sub main wiring of two run with 4.0 Sqmm single core PVC insulated, FR flexible multi stranded copper conductor cable 1100 volts grade, drawn through and including PVC conduit and accessories of suitable size and fixed on concealed surface of wall/ceiling with cutting chases where required including one run of 4.0Sqmm single core PVC insulated, FR, flexible copper cable as earth continuity conductor in green color complete all as specified and directed.

S & F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed.

Supply, install, commissioning and testing of centrifugal pump set electric driven 3 phase 415 volt 50 Hz capacity 7.5 HP with star delta starter of suitable rating complete including all necessary electrical connection complete all as specified and directed.

TECH SERVE SOLUTIONS

Shree Builders

Sharnamsingh and Co

Priya Construction co.