Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.5 LAccepted-AOC | L1 | Accepted-AOC Work awarded being lowest bidder | |
| 2 | L2₹20.2 L+₹71,921 (3.70%)Rejected-AOC | L2 | Rejected-AOC Rejected being highest bidder | |
| 3 | L3₹21.9 L+₹2.4 L (12.5%)Rejected-AOC 126 RAJ KUMAR SANGAT SINGH NAGAR ADARSH NAGAR JALANDHAR JALANDHAR PUNJAB 144008 | JALANDHAR | PUNJAB | 144008 | L3 | Rejected-AOC Rejected being highest bidder |
Tender Value
Refer Docs
EMD Value
₹28,700
Closing Date
3 Jun 2021, 6:00 pmClosed
Executive Engineer
Dehra Division HPPWD Dehra
Painting, Distempering and Flooring, tile work, Sanitary, Brick work etc.)
2021_PWD_47633_1
EE Dehra letter No. 800-04 dated 13.05.2021
Open Tender
Civil Works
Item Rate
90 days
Dehra
Please refer to tender document
8 documents required · 8 mandatory
₹500
₹28,700
20 Dec 2021
20 May 2021
4 Jun 2021
20 May 2021
3 Jun 2021
20 May 2021
20 May 2021 - 24 May 2021
Amount
Repairs to plaster in patches of 2.50 Sq.M. and under and 10 to 15mm thick including cutting the patch in proper shape and replastering the surface of the wall including disposal of rubbish to the dumping ground within a Lead of 20 metres with:Cement Mortar 1:5 (1 Cement : 5 Sand) complete as per HPPWD specifications and as per direction by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Royality, Malkana, Octroi, Toll Tax ,GST or any other taxes imposed by the Government.
Demolition above G.L.upto floor two level including disposal of unserviceable materials within 20 metres un-reinforced cement concrete upto 15cm. Thickness. lead. and as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, GST, Toll Tax, Sales tax or any other taxes imposed by the Government.
Providing and fixing 200x200mm Two hundred into two hundred millimeter) MDOUBLE CHARGE/ULTRA CHARGE VITRIFIED Tiles Nitco or equivalentas per approved shade and colour in flooring, treads of steps and landings laid over 12mm (twelve millimeter) thick cement mortar 1:3 (one cement : three sand) jointed with cement slurry finishing with flush pointing in white cement mixed with pigment to match the shade of tiles as required up to all floor level, complete as per HPPWD specifications or as directed by the Engineer,-in-Charge, including carriage of materials within all leads, lifts, and other incidental.The rate is inclusive of Royality, Malkana, Octroi, Toll Tax ,GST or any other taxes imposed by the Government.
Providing and laying upto all floor level White glazed tiles of size 300x300mm (three hundred into three hundred millimeters) and 6mm (six millimeters) thick of approved brand and make (Kajaria/Swastik/Somany/bell/Johnson tiles in skirting, treads of steps and dado for all heights, laid on 12mm (twelve millimeters) thick cement mortar 1:3 (one cement is to three sand) and jointed with white cement slurry complete as per HPPWD specification and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Royality, Malkhana, Octroi, toll tax or any taxes imposed by the Government. The rate is inclusive of Royality, Malkana, Octroi, Toll Tax ,GST or any other taxes imposed by the Government.
Providing and fixing 40mm (forty millimeter) thick first class deodar wood panelled glazed or panelled and glazed shutter for doors, window and clerestery windows including bright finished/black enamelled iron butt hinges with necessary screws etcetera complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is inclusive of Royality, Malkana, Octroi, Toll Tax ,GST or any other taxes imposed by the Government.
Providing and fixing 40mm (forty millimeter) thick second class Deodar Wood wire gauze shutters using galvanized MS wire gauze of IS gauge designation 85-G (eighty five-G) with wire of diameter 0.56mm (zero point five six millimeters) for doors, windows and clearstory windows including bright finished black enamelled iron butt hinges, with necessary screws etcetera complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of Royality, Malkana, Octroi, Toll Tax ,GST or any other taxes imposed by the Government.
Providing and fixing prepainted sandwich puff roofing with top skin of 0.60mm (Zero point six zero millimeter) thickness prepainted steel sheet over steel trusses made of cold rolled steel coil, having a puff depth of 50mm (fifty millimeter) and weight of puff 35 to 37Kg. (thirty five to thirty seven kilogramme) per cubic meter and interior skin 0.05mm (zero point zero five millimeter) thick of approved shade including fixing with prepainted iron J or L hooks bolts and nuts 6mm (six millimeter) diameter with prepainted limpet and rubber washers complete with all accesseries as required and steel frames are to be painted as per HPPWD specifications or as per direction of Engineer-in-Charge, including carriage of materials within all leads and lifts.The rate is inclusive of Royality, Malkana, Octroi, Toll Tax ,GST or any other taxes imposed by the Government.
Distempering (two or more coats) with oil bound washable distemper of approved brand and manufacture (Nerolac/Asian or equivalent make) and of required shade on un-decorated wall surfaces to give an even shade over and including a priming coat with distemper, primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth and carriage of material within all leads, lifts and other incidental. The rate is inclusive of Royality, Malkana, Octroi, Toll Tax ,GST or any other taxes imposed by the Government.
Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning, oil, grease, dirt and sand papering and knotting with ready mixed paint brushing wood primer pink of approved brand and manufacture (Narolac/Asian paints or its equivalent) complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Royality, Malkana, Octroi, Toll Tax ,GST or any other taxes imposed by the Government.
Painting two or more coats (excluding priming coat) on new wood and wood based surfaces with enamel paint of approved brand and manufacture (Narolac/Asian paints or its equivalent) and of approved shade to give an even shade including cleaning the surface of all dirt, dust and other foreign matter complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Royality, Malkana, Octroi, Toll Tax ,GST or any other taxes imposed by the Government.
Painting one coat(excluding priming coat)on previously painted wood and wood based urfaces with enamel paint on wooden jalli, Wooden Chhajja to given and even shade including cleaning of all dirt,dust and other foreign matter sand papering and stopping and other foreign matter complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental.The rate is inclusive of Royality, Malkana, Octroi, Toll Tax ,GST or any other taxes imposed by the Government.
Steel work welded in built up sections trusses and framed work, composed of beams, joists, channels, angles, tees, flats and connecting plates or angle cleats etc. as in trusses and trussed purlins, main and cross beams, hip and jack rafters, purlins connected to common rafters and the like in building including cutting, fixing, lifting, hoisting and placing in position complete and applying a priming coat of red lead paint complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental.The rate is inclusive of Royality, Malkana, Octroi, Toll Tax ,GST or any other taxes imposed by the Government. In beams, joists, channels, angles, tees, flats with connecting plates or angle cleats as in mains and cross beam, hip and jack rafters, purlins connecting to common rafters and the like complete.
Providing and fixing in position collapsible steel shutters with vertical channels 20 mm X10 mmX2mm and braced with flat iron diagonals 20 mm X5 mm size with top and bottom rails of T.iron 40 mm X40 mm X6 mm with 38 mm dia steel pulley complete with bolts and nuts locking arrangements,stoppers,handles,including applying a priming coat of red lead paint.complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Royality, Malkana, Octroi, Toll Tax ,GST or any other taxes imposed by the Government. In beams, joists, channels, angles, tees, flats with connecting plates or angle cleats as in mains and cross beam, hip and jack rafters, purlins connecting to common rafters and the like complete.
Painting two or more coats (excluding priming coat) on previously painted steel and other metal surfaces with enamel paint of approved brand and manufacture (Narolac/Asian paints or its equivalent ) other than white and of approved shade brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Royality, Malkana, Octroi, Toll Tax ,GST or any other taxes imposed by the Government.
White washing with lime on undecorated wall surfaces two or more coats to give an even shade including throughly brooming the surface to remove all dirt dust mortar dirt and other foreign matter including preparing the surface even and sand papered smooth and carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Royality, Malkana, Octroi, Toll Tax ,GST or any other taxes imposed by the Government.
Earth work in excavation in foundation for all types of structures such as retaining walls, breast walls, culvers, drains, parapets and other similar structures in all kinds and classification of soil, including saturated soil comprising of ordinary mix soil, ordinary rock, hard rock, chiseling/wedging out rocks (where blasting is prohibited) complete as per drawing and MORD Technical Specification clause 305.1 and as per the direction and the entire satisfaction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Royality, Malkana, Octroi, Toll Tax ,GST or any other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated concrete 1:5:10 (one cement: five sand : ten graded crushed stone aggregate 40mm (forty millimeter) nominal size) for plain cement concrete, in or under water in open foundation for all types of structures, including pumping or bailing out water/ dewatering (surface/sub-soil watering) and including removal of slush which may arise at the time of laying under water for all heights/depth and any quantum of water including cost of form work and curing complete as per drawing and MORD technical specification 802, 803, 1202 & 1203 and as per the direction and the entire satisfaction of Engineer-in-Charge, including carriage of material with in all leads lifts and other incidentals. The rates including Royality, Malkhana, Octroi, toll tax, sale tax,GST or any other taxes imposed by the Government.
Random rubble masonry/polygonal rubble masonry (un coursed/brought to courses) with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement is to six sand is to twelve graded crushed/broken stone aggregate 20mm (twenty millimeter) nominal size) at plinth level in cement mortar 1:6 (one cement isto six sand) and curing complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of Royality, Malkana, Octroi, Toll Tax ,GST or any other taxes imposed by the Government.
Brick work using Second class common burnt clay buildings bricks in foundation and plinth with cement mortar 1:6 (one cement isto six sand) and curing complete including carriage of materials within all leads, lifts and other incidental, and as per directions of Engineer-in-Charge. The rate including Royality, Malkhana, Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government. B26:C27
Second class half brick work using common burnt clay building bricks in super structure above plinth level upto all heights/floor level in cement mortar 1:4 (one cement isto four sand) shall be provided with hoop iron and curing complete including carriage of materials within all leads, lifts and other incidental, or as directed by the Engineer-in-Charge. The rate is inclusive of Royality, Malkana, Octroi, Toll Tax ,GST or any other taxes imposed by the Government.
Providing and applying 15mm (fifteen millimeters) thick cement plaster with cement mortar 1:6 (one cement isto six sand) in single coat on rough side of brick/concrete/ stone walls for interior plastering upto all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth complete as per HPPWD specifications and as per direction by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Royality, Malkana, Octroi, Toll Tax ,GST or any other taxes imposed by the Government.
Providing and applying 15mm (fifteen millimeters) thick cement plaster with cement mortar 1:6 (one cement isto six sand) in single coat on fair side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth complete as per HPPWD specifications and as per direction by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Royality, Malkana, Octroi, Toll Tax ,GST or any other taxes imposed by the Government.
Wall painting (two or more coats) with interior emulsion paint of approved brand and manufacture of (Heritage/ALLTECK/Narolac/Asian paints) of interior grade and of approved shade on undecorated concrete/ stone/ plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other forein matter and sand papered smooth including applying of putty as required for making the surface complete as per HPPWD specifications, approved drawing or as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals.The rate is inclusive of Royality, Malkana, Octroi, Toll Tax ,GST or any other taxes imposed by the Government.
Providing and fixing anodized aluminium sliding door bolts anodized transparent or dyed to required colour and shade with necessary bolts, nuts and screws etcetera complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of octroi, toll tax or any taxes imposed by the Government (250x16mm (two hundred fifty into sixteen millimeters).
Providing and fixing aluminium tower bolts (Barrel type) anodized transparent or dyed to required colour and shade with screws etc. complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of Royality, Malkana, Octroi, Toll Tax ,GST or any other taxes imposed by the Government. a) 200x10mm (two hundred into ten millimeters).
Supplying and fixing glass panes with putty and nails including removal of broken glass panes wherever necessary:-Plain Glass: 4mm thick. complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of Royality, Malkana, Octroi, Toll Tax ,GST or any other taxes imposed by the Government.
Pointing on square rubble,coursed or un-coursed stone masonry with cement mortar 1:3(1 ement:3 Sand (a) Flush pointing complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of Royality, Malkana, Octroi, Toll Tax ,GST or any other taxes imposed by the Government.
SURESH KUMAR GULERIA
RAJ KUMAR
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .