Compound Wall Repairing Around Different AMC Plot In Bodakdev Ward And Other Ward in North West Zone.

Name of Work: Compound Wall Repairing Around Different AMC Plot In Bodakdev Ward

And Other Ward in North West Zone.

Sr. No Qty Items Per

Excavation for foundation up to1.5 m depth

including sorting out and stacking of useful

1 materials and disposing of theexcavated stuff

upto 50 Meter lead.(A) Loose or soft soil (R & B

S.O.R 2023-24 I.no. Item Code 04001A)

5 Upto 1.5 mt Depth 115.92 Cmt

5 1.5 to 3.0 mt.depth 128.52 Cmt

Filling available excavated earth (excluding

rock) in trenches, plinth, sides of foundations etc.

2 8 in layers not exceeding 20 cm. in depth 129.1 Cmt

consolidation each deposited layer by ramming and

Providing and laying cement concrete1:5:10 (1-

Cement: 5- coarses sand and:10-hand broken

3 10 stone aggregates 40mm nominal size) and curing 2492.51 Cmt

complete excluding cost of formworkin (A)

Foundation and Plinth.

Providing and laying cement concrete1:4:8(1-

Cement 4- coarses and:8-hand broken stone

4 2 aggregates 40mm nominal size) and curing 2653.67 Cmt

complete excluding cost of formworkin(A)

Foundation and Plinth

Providing and laying cement concrete1:3:6

(1-Cement: 3- coarses sand and:6-hand broken

5 2 stone aggregates 40mm nominal size) and curing 2976 Cmt

complete excluding cost of formworkin (A)

Foundation and Plinth.

Providing and laying cement concrete 1:3:6 (1-

Cement:3-coarse sand:6-crushed stone aggregates

6 2 20mm nominal size) and curing complete 4006.15 Cmt

including cost of formwork in (A) wall

Providing and laying cement concrete work 1:2:4 ((1-

Cement:2- coarse sand:4-graded aggregates

20mm nominal size) curing complete excluding

cost of formwork and reinforcement.

Foundations, footings, base or columns and

Slabs, landing, shelves, balconies, lintels,

b 2 beams, girders and cantilivers upto floor two 4012.47 Cmt

Independent piers, columns, and pillars, upto floor

Provdg. & laying cement concrete 1:2:4 (1

cement : 2 coarse sand : 4 graded stone

aggregates 20 mm minal size) for reinforced

concrete chhajjas not exceeding 10 cm.

8 2 thickness upto floors two level including finishing 6487.07 Cu.M.

the exposed surfaces with cement mortar 1:3 (1

cement : 3 find sand) to give a smooth and even

surface centering and formwork and curing

complete excluding cost of reinforcement.

Providing and laying controlled cement

concrete / Ready Mix Concrete of M-200 and

9 curing complete, excluding the cost of form

work and reinforcement for reinforced concrete

Foundations, footings, base of columns, and mass

Walls from top of foundations /level up to floor Two

Slabs,landing,shelves,Balconies Lintels, Beams,

Girders and Cantilever upto floor

Columns, pillars, posts, and struts, up to floor two

Staircase up to floor two level. (excluding

(K) 2 Vertical and horizontal fins up to floor two level. 4701.97 Cu.M.

Providing and Laying ordinary cement

concrete 1:2:4 (1-Cement 2-coarsesand: 4-

graded stone aggregates 20 mm nominal size)

10 2 and finishing smooth with curing etc. complete 6241.78 Cum

including the cost of form work but excluding the

cost of reinforsement for R.C.C work in (iv) Slabs

having more than 13 cm and upto 15 cm.thickness

Providing and Laying ordinary cement

concrete 1:2:4 (1-Cement 2-coarsesand: 4-

graded stone aggregates 20 mm nominal size)

11a 2 and finishing smooth with curing etc. complete 7401.59 Cum

including the cost of form work but excluding the

cost of reinforsement for R.C.C work in (iv) Slabs

having more than 8 cm and upto 10 cm.thickness

Brick work using common burnt clay

building bricks having crushing strength not

12 less than 35kg./Sq.Cm.in foundation and plinth in

Cement Mortar1:6 (1-Cement :6 - fine

10 (A) Conventional (upto 10 ton) 3981.21 Cmt

4 B) Modular 4241.7 Cmt

Extra Rate for brickwork in Above Item for

13 super structure above plinth level upto floor two

level (B) Conventional

a 10 (A) Conventional 272.25 Cmt

b 5 B) Modular 262.35 Cmt

C) above floor two level Item No. 2(6.13) (A) Per Floor

c 2 42.66 Per Cum

D) above floor two level Item No. 2(6.13) (B) Per Floor

d 2 40.09 Per Cum

Half brick masonry in common brunt clay

building bricks having crushing strength not less

14 20 than 35 Kg/Sq.Cm. in Cement mortar 1:5 ( 1- 583.49 Smt

Cement : 5 coarse sand ) in foundation

and Plinth conventional brickwork

Extra for half brick masonry in super

15 24.2 structure above plinth level upto floor two 52.8 Smt

level (B) conventional

Providing form work in ordinary timber

planking so as to give a rough finish including

centering, shuttering, strutting and propping etc.

16 height of propping and centering below

supporting floor to celling not exceeding 4 M

& removal of the same for in situ reinforced or

plain concrete work upto floor four level

Foundation, footings, bases of columns etc.

and mass concrete.

(B) Flat surfaces such as soffits of supspened floors

b 2 slabs Landings and the like. (1) Floors etc. upto 200 252 Smt

mm in thickness.

(B) Flat surfaces such as soffits of suspended floor

c 2 roof slabs Landings and the like. (2) Floors etc. 270.9 Smt

above 200mm in thickness.

Vertical surface such as walls (any thickness)

d 2 partitions and the like including attached buttresses 229.95 Smt

& string course & the like.

(ii) Sides And Soffits Of Beam, Haunchings

e 2 Cantilevers, Girders, Bressumers And Lintels 192.15 Smt

Not Exceeding 1 M In Depth.

(G) Columns PillarsPosts and struts. (1) Square

Rectangular Polygonal in plan.

g 2 (2) Circular or curved in plan. 422.1 Smt

(H) (2) Sides and soffits of Beams Beam

h 2 Haunchings canti-levers Girders Bressumers and 259.88 Smt

Lintels exceeding 1M.in Depth.

Providing and fixing 35 mm thick panelled,

glazed or panelled and glazed shutters for Doors

17 windows and clear story windows including

anodised alluminium But hinges with necessary

screws and indian teak wood shutters with.

a 2 (A) Plywood sheet panels. 3459.09 Smt

b 2 (B) Particle board panels 3464.51 Smt

c 2 (C)Hard board panels. 3433.65 Smt

d 2 (D) Asbestos sheet panels. 3406.53 Smt

Providing and fixing 25 mm thick shutters for

cup boards etc. including black enamelled

M.S. butt hinges with necessary screws.(A) Indian

teak wood. (i) Fully Panelled.

Providing and fixing 25 mm thick shutters for

cupboards etc. including anodised alluminiu butt

hinges with necessary screws. (A) Indian teak wood.

(ii) Fully Glazed.

Providing and fixing 25 mm thick shutters for

cupboards etc. including anodised alluminiu butt

hinges with necessary screws. (A) Indian teak wood.

(ii) Partly panelled and partl glazed.

Providing and fixing M.S. grills of required

pattern to wooden frames of windows etc. with

19 2 M.S. flats at required spacings and frame 100.17 kg

alround, square or round bars with round headed

bolts and nuts or by screws (A) Plain Grill.

Providing and fixing glazed louvered glass

windows and ventilators with teak wood frame

10 cm. x 7 cm. size including 3 coats of oil

painting to wood work etc.complete.

Providing and fixing glazed louvered glass

windows and ventilators with teak wood frame

21 2 10 cm.x7 cm. size including 3 coats of oil 4332.47 Smt

painting to wood work etc.complete.with wooden

louvers plank 12mm thick

Providing and fixing 35 mm thick shutters for

Doors, windows and clere story windows

including Indian teak wood frames 10 cm x 7 cm.

22 2 size including anodized alluminium fixtures 4595.06 Smt

and fastenings including primer coat of approved

quality and two coats of oil painting etc, complete.(ii)

Providing and fixing 35 mm thick shutters for

Doors, windows and clere story windows including

Indian teak wood frames 10 cm x 7 cm. size

23 2 including black enamelled iron oxidixed fixtures and 5285.45 Smt

fastenings including primer coat of approved quality

and two coats of oil painting etc, complete.(ii)

Fully Panelled.

Providing and fixing 35 mm thick shutters for Doors,

windows and clerestory windows including Indian

teak wood frames 10 cm x 7 cm. size including

a 2 anodized alluminium fixtures and fastenings 4940.25 Smt

including primer coat of approved quality and two

coats of oil painting etc, complete. (iii) Partly

panelled and partly glazed.

Providing and fixing 30 mm thick FACTORY

MADE SOLID PANEL PVC DOOR SHUTTER

consisting of frame made out of M.S.tubes of

gauge thickness and size of 19 mm x 19 mm for

stiles and 15 mm x 15 mm for top and bottom

rails.M.S. frames hall have a coat of steel

primers of approved make and manufacture, M.S.

frames hall be covered with 5 mm thick heat

moulded PVC ‘C’ channel of size 30 x 50 mm

formings tiles, and 5 mm thick 75 mm wide PVC

sheets for to prail, lock rail and bottom rail on either

side, and 10 mm (5 mm x 2) thick, 20 mm wide

cross PVC sheet as gap insert for top rail and

bottom rail, Panelling of 5 stiles and rails with

mm wide x 5 mm thick PVC sheet beading

on eighter side, and joined together with

solventcement adhesive,. An additional 5 mm thick

PVC strip of 20 mm width is to be stculkon the

interiors side of the ‘c’ channel using

PVC solvent cement adhesive etc. complete

as per direction of Engineer incharge,

manufacture’s specification and drawing.

Providing and fixing in position collapsible

steel shutters with vertical channels 20 x 10 x

2 mm braced with flat iron diagonal 20 x 5 mm size

with top and bottom rails T iron 40 x 40 x 6 mm

with 38 mm dia steel pulleys complete with bolts,

nuts, locking arrangements, stoppers, handles,

including a priming coat of red lead paint &

Providing and fixing 1 mm thick M.S. sheet

sliding shutters with frame and diagonal

braces of 40x40x6 mm angle iron, 3.15 mm

M.S.gusset plates at Junctions and corners

26 2 mm dia. pulley, 40x40x6 mm angle and T- 3652.12 Sqm

iron guide rail at top and bottom

respactively with handles, stoppers and locking

agangement etc, including applying a priming

coat of red lead paint.

Providing & Fixing in position Alluminium doors

with frame using approved quality anodised

extruded alluminium section as approved by

Engg.in charge(Jindal alluminium) (a) Frame

sections 101.6x44.45 mm (b) Shutter bottom

vertical & top section 83.5x44.45 (wt.1.31

kg/mt.)(at 1.31 kg/mt) (c) Shutter bottom

27 2 section at 114.3x44.45 mm at(1.37kg/mt) Shutter

middle section at 100x44.3 wt.(1.37 kg/mt)

incl.providing & installing 5 mm thick approved

color Acrylic sheet of standard quality fixed with

glazing chips on upper pannel & Laminated sheet

on lower pannel (wtt.0.13 kg/Rmt) etc. comp.as

direction of engg.in charge.(N.S.)

Providing and fixing extruded aluminum window

having extruded aluminum Colour r Powder Coated

section frame main outer size 127mm x 38.10mm x

1.35mm ,@ Wt.1.384 Kg/mt,horizontal Four track

member size 122.20mm x 31.75mm x 1.10mm @

Wt. 1.205 Kg/mt,vertical member of size 122.20mm

x 31.75mm x 1.50mm ,@ Wt. 1.398 Kg/mt with

28 2 sliding shutters of horizontal member size 40mm x 2119.14 Sq. M.

18mm x 1.29mm @ wt.of 0.456Kg/mt,vertical

member of size 40mm x 18mm x 1.29mm @ wt.of

0.456Kg/mt,@ with 5 mm thick transparent bronze

colour tinted float glass with powder coated

aluminum fittings and fixtures and transparent

silicon sealant glass fixing to frame as per details

etc complete for window.

Providing & Fixing in position Alluminium vents

with frame using approved anodised extruded

alluminium section as approved by Engg. In

charge.(Jindal alluminium) units equivalent

29 2 Approved Rate)Frame section of 63.50 x

mm. (wt. 0.68Kg/Rmt) incl. Providing & Installing

5 mmthick approved color Acrylic sheet of

standard quality etc. comp.

Providing and fixing standared extruded of

alluminium section of size 63 mmx38.10

mmx1.2 mm (Jindal Section:2434, or equivalent

30 2 @ Wt.0.643 Kg/mt) with colour anodized 1163.92 Sq. M.

alluminium frame for ventilation with 5 mm

thick frosted glass as details etc complete for

Providing and fixing standared extruded of

alluminium section of size 63.50 x 38.10 x

mm,@ Wt 1.094Kg / Rmt with colour Powder

31 2 Coated alluminium frame with 5 mm thick

transparent bronze colour tinted float glass as

details etc complete for Fix Partition

Providing and laying 40 mm thick marble chips

flooring rubbed and polished (I.E.terrazo) to

granolithic finish with under layer 30 mm thick

cement concrete1:2:4 (1-Cement: 2-coarse sand:4-

graded stone aggregate 10 mm and down

gauge) and to player 10 mm thick with white, black

or white and blak marble cihps of required sizes

from 1 mm to 4 mm nominal size laid in cement

marble powder mix 3:1 (3- Cement:1-Marble powder

by weight) in proportion of 4:7 (4- Cement: 7-

marble chips by volume) (C) Medium Shade

pigment with approx 50% white cement and

50% ordinary cement (In top layer only) (upto

Providing and laying marble chips skirting

(Terrazo) or dedo rubbed, and polished to

Granolithic finish to player 6 mm white, black or

white and black marble chips of size from

smallest to 4 mm nominal size laid in cement

marble powder mix 3:1 (3-Cement: 1 marble

powder by weight) in proportion of 4:7 (4-cement

marble powder mix: 7-marble chips by volume) (B)

Light shade pigment with white cement (In top layer

Providing and laying white glazed tiles 6mm thick in

flooring treads of steps and landing laid on a bed of

34 2 12mm thick cement mortar 1:3 (1-cement : 3-coarse

sand ) finishing with flush

Providing and laying Ceramic tiles 6 mm thick in

flooring treads of steps and landing laid on a bed

35 2 of 12 mm thick cement mortar 1:3 (1- cement :3- 960.47 Sq.M.

coarses and) finishing with flush pointing in white

Providing & Fixing 20 mm thick Mirror Polished

Decorative Granite Board with Computerised

Golden Letters Discription as per

36 2 instructions of engg. in charge to M.S. frame

structure for Inaugaration & Public Handover

Function (N.S.)

Providing and laying Vitrified tiles 8 to 10 mm thick,

36''x36'' in flooring treads of steps and landing laid

37 2 on a bed of 12 mm thick cement mortar 1469.91 Sq.M.

1:3 (1-cement:3-coarses and) finishing with flush

pointing inwhite cement.

Providing and laying Vitrified tiles 8 to 10 mm thick,

24''x24'' in skrting risers of steps and dedo on

38 2 mm thick cement plaster 1:3 (1- cement: 1130.15 Sqm

3-coarse sand) and jointed with white

Providing and laying Vitrified tiles 8 to 10 mm thick,

in skrting risers of steps and dedo on 10 mm

thick cement plaster 1:3 (1-cement:3- coarse

sand) and jointed with white cement slurry

Providing and laying Vitrified tiles 8 to 10 mm thick

24'' x 24'' in flooring treads of steps and landing laid

40 2 on a bed of 12mm thick cement mortar 1:3 (1- 1,062.50 Sq. M.

cement : 3-coarse sand ) finishing with flush pointing

in white cement.

P & L 24" x 24" vitrified 8 mm thick tile flooring over

20 mm (average) base of cement mortar 1:6 (

cement: 6 coarse sand) on new surface or fixing on,

existing flooring by adhesive material including

41 2 dismentaling of existing flooring and jointed with

color cement slurry including finised with flush

pointing & cleaning the surface etc. complete for

Providing and laying polished Kota stone slab

flooring over 20 mm (Average) thick base of

cement mortar 1:6 (1-cement:6-coarses and) or

L.M.1.1.5 (1-Lime putty:1.5-coarses and) laid

over and jointed with grey cement slurry mixed with

pigment to match the shade of slab including

rubbing and polishing etc. complete. (A) 25 mm

Providing and laying marble stone slab flooring over

20mm (average)base of cement mortar 1:6 (1-

cement : 6 coarse sand) or L.M. 1:1.5(1- lime putty :

1.5 - coarse sand) laid and jointed with gray cement

slurry including rubbing and polishing complete. (A)

Marble slab 25mm thick

Providing and laying polished Kota stone slab

flooring over 20 mm (Average) thick base of

cement mortar 1:6 (1-cement:6-coarses and) or

L.M.1.1.5 laid over and jointed with grey

cement slurry including rubbing and polishing

etc.complete. (B) 30 mm thick

Providing and laying polished kota stone slab

mm thick in risers of steps, skirting Dedo and pillars

laid on 10 mm thick cement mortar 1:3 (1-Cement

45 2 :3 coarses and) and jointed with gray 1176.03 Sq.M.

cement slury mixed with pigment to match the

shade of slab including rubbing and polishing

Providing and laying cement concrete

flooring 1:2:4 (1-cement: 2-coarses and:4-

46 2 graded stone aggregate 20mm nominal size) laid 297.68 Sq.M.

in one layer and finished with a floating coat of

neat cement. (A) 40mm thick.

Providing and laying cement concrete

flooring 1:2:4 (1-cement: 2-coarse sand:4-

47 2 graded stone aggregate 20mm nominal size) laid 348.08 Sq.M.

in one layer and finished with a floating coat of

neat cement. (B) 50mm thick.

Providing and laying broken china mosaic flooring

for terrace using 12 mm to 20 mm broken pieces

of glazed tiles to be laid over cement mortar 1:3 to

plain or slope and to be tempered to bring mortar

creme out upto surface using white cement

including rounding off junctions and extending

them up to15 cm along the wall, clearing with

water and oxalic acid etc.as directed.

Providing and laying coloured glazed tiles

of the size 300 mmx200 mmx8 mm/300

mmx450 mmx8 mm in skirting, risers of steps

and dedo on 10 mm. thick cement plaster 1:3

(1cement: 3 coarse sand) & jointed with white

Providing ridges or hips 600 mm overall in plain

G.I. sheet class-3 fixed with G.I. J or L Hooks

and nuts 8 mm dia G.I. Limpet and bitumen

washer complete. (1) 0.80 mm thick sheet.

Providing and fixing 150 mm wide 450 mm over all

semi circular plain G.I.sheet class-3 gutter with

Iron brackets 40 mmx3 mm size Bolts, Nuts,

washers etc. including making necessary

connection with rain water pipes. (i) 0.80 mm thick

Providing and fixing five courses water profing

treatment with bitumen felt consisting of

second and fourth course of blown/ bitumen

or/and residual bitumen applied hot at

kg.per Sq.M.of area for each course and first

52 2 course with fibre base bitunen saturated under 466.84 Sqm

lay type land third course with fibre base self

finished felt type 2 grade 1 and fifth and final

course of stone grit 6 mm and down size or pea

sizes gravel spread at 0.008 Cu.Metre/Sq.metre

preparation of surface excluding grading complete.

Providing and fixing on wall face C.I. Rain water

pipe including filling the joints with spun yarn soaked

in neat cement slurry and cement mortar

1:2(1- Cement : 2-fine sand) (A) 75 mm dia.

Providing 15 mm thick cement plaster in

single coat on Rough (Similar) side of single or

54 20 half brick walls for interior plastering up to floor 174.83 Sqm

two level and finished even and smooth in (i)

Cement mortar 1:3 (1-cement :3-sand)

Providing 20mm thick sand faced cement plaster on

walls upto height 10 metres above ground level

55 25 consisting of 12mm thick backing coat of C.M. 1:3 297.68 Sqm

(1-cement : 3-sand) and 8mm thick finishing coat of

C.M. 1:1 (1-cement : 1-sand) etc. complete.

Colour washing with lime on wall surface (two

coats) over and including a primary coat of

56 2 white washing to give an even shade after 12.29 Sqm

through brooming the surface to remove all dirt,

dust, mortar drops and other foreigh matter.

Removing dry or oil bound distemper by

a washing and scraping and sand papering

the wall surface smooth including necessary

repairs to scratches complete.

Distempering with dry distemper of approved brand

and manufacture (two coats) and of required

shade on wall surfaces of given an even shade,

58 2 over and including a priming coat of 46.94 Sqm

whiting after thoroughly brooming the surface

free from mortar dropping and other foreign

Distempeing (Two coats) with oil bound

distemper of approved brand and

manufacture and of required shade on wall

surfaces to give an even shade, over and

including a priming coat with distemper

primer of approved brand and manufacture

after thoroughly brushing the surface free from

mortar dropping and other foreign matter

and also including preparing the surface even

and sand papered smooth.

Extra Coat for Above Item over above for

60 2 every subsequent coat of approved brand and 30.09 Sqm

Wall painting (two coats) with plastic emulsion

paint of approved brand and manufacture on

undecorated wall surface to give an even shade

including throughly brushing the surface free from

mortar droppings and other foreign matter and sand

papered smooth.

Extra over item for every sub sequent coat of

62 2 wall painting with plastic emulsion paint of 33.39 Sqm

Extra over item for painting with plastic emulsion

62 a 2 paint of approved brand on ceilings and sloping 5.36 smt

Applying priming coat over new steel and other

metel surface after and including preparing

the surface by throughly cleaning, oil, grease,

63 2 dirt and other foreign matter and scoured 34.34 Sqm

with brushes fine steel wood, scrapers and sand

paper with ready mixed priming paint brushing

Painting two coats (excluding priming coat)

on new steel and other metal surface with

enamel paint, brushing, interior to give an even

shade including cleaning the surface an even

shade including cleaning the surface of all dirt, dust

and other foreign matter.

Painting one coats (excluding priming coat) on

previously painted steel and other metal surface

65 2 with enamel paint, brushing to give an even 54.35 Sqm

shade including cleaning the surface of all dirt,

dust and other foreign matter.

66 2 Extra over item for every sub sequent coat of paint. 50.4 Sqm

Painting two coats (excluding priming coat)

on new steel and other metal surface with

67 2 synthetic enamel paint, brushing to give an even 64.66 Sqm

shade including cleaning the surfaceofalldirt,dust

and other foreign matter.

Painting one coats (excluding priming coat) on

previously printed steel and other metal surface with

68 2 synthetic enamel paint, brushing to give an even 43.79 Sqm

shade including cleaning the surface of all dirt,

dust and other foreign matter.

Extra over Above item for every sub sequent

Painting two coats (excluding priming coat)

on external surface of new rain water, soil, waste

and vent pipes and fittings with ready mixed

bituminous brushing, black, anti corrosive to

give an even shade including cleaning of all dirt,

dustand other foreign matter.(75 mm dia)

Painting two coats (excluding priming coat)

on external surface of new rain water, soil, waste

and vent pipes and fittings with ready mixed

bituminous brushing, black, anti corrosive to

give an even shade including cleaning of all dirt,

dust and other foreign matter.(100 mm dia)

Painting two coats (excluding priming coat)

on new wood and wood based surface with

enamel paint, interior to give an even shade

72 2 including cleaning the surface of all dirt, dust 26.78 Sqm

and other foreign matter sand papering and

stopping. (a) Ready mixed paint brushing wood

Painting one coats (excluding priming coat) on

previously painted wood and wood based

surface with enamel paint, to give an even shade

73 2 including cleaning the of all dirt, dust and other

foreign matter.(b) Ready mixed paintbrushing

priming for enamel

Extra over Above item for every sub sequent

74 2 coat of paint.

Painting two coats (excluding priming coat) on

new wood and wood based surface with ready

mixed paint, brushing, oil, gloss, semi gloss to

give and even shade including cleaning of all

dust, dirt and other foreign matters and

papering and stopping.

Finishing wall with weather proof exterior

emulsion paint on wall surface (two coats) to

give an required shape even shade after

thoroughly brushing the surface to remove all dirt,

and remains of loose powdered

materials.etc complete

Applying two coats of Birla (white cement

based) or Asian (acryliclapy-putty) or

equivalent & two coats of primer of approved

77 2 brand and manufacture on new wall surface to 40.19 Sqm

give an even shade including thoroughly brushing

the surface free from mortar dropping and other

foreign matter and sand papered smooth.

Painting one coats (excluding priming coat) on

previously painted wood and wood based surface

with enamel paint, to give an even shade including,

cleaning the of all dirt, dust and other foreign matter.

Writing etter or figures on any surface with

black japan paint (stops, comas, hyphens and

79 2 the like not to be measured and paid for 3.15

separately) (i) Block (Letters/Figures) (Per

Letter pet CM.HT)

Demolition including stacking of serviceable

80 2 materilas and disposal of unserviceable materials 1047.38 Cu.M.

with all lead and lift. (i) R.C.C. work

Demolition of Brick work and stone masonry

including stacking of serviceable materil as and

disposalof unserviceable materials with all lead

and lift.(ii) In Cement Mortar.

Dismentaling tiled of stone floors laid in mortar

including stacking of serviceable materil as and

disposal of unserviceable materials with all lead

Dismentaling of sheet roofing including

ridges, Hips, Valleys, Gutters etc. stacking of

83 2 serviceable materil as and disposal of 47.25 Sqm

unserviceable materials with all lead and lift.(i)

G.I.sheet roofing.

Dismentling steel work including distempering

84 2 and stacking the materials with all lead and lift.

Dismentling doors, windows, ventilators etc.

(wood or steel) shutters including

chowkhats architraves, hold fasts and other

attachment etc. complete and stacking the

material within all lead and lift.(i) Not exceeding

Dismentling doors, windows, ventilators etc.

(wood or steel) shutters including

chowkhats architraves,hold fasts and other

attachment etc. complete and stacking the

material with in all lead and lift.(ii) Exceeding

Dismentling barbed wire in fencing including

making rolls and also including dismentling

fencing posts including all earth work concrete in

87 2 base and making good the disturbed ground 66.15 Rmt

stacking useful materials as directed and

disposing as directed and disposing of the

unserviceable materials with all lead and lift.

Dismentling C.Ipipes G.S.W. pipes abd A.C. rain

water pipes with fittings and clamps including

stacking the materials with all lead and lift (for any

Dismantling santtary fittings like wash basin . W.C.

pan Indian and Europe an type, flushing tank etc.

including stacking the materials with all lead and

Scraping oil paint from steel and other metal

90 2 surface and making the surface even (with 48.83 Smt

Hand Scraping.)

Removing and scraping of old deteriorated

plaster of any thickness from wall /

91 2 R.C.C member including stacking of 19.38 Smt

serviceable material and disposal of

unserviceable from site of work with all lead and lift

Providing and fixing M.S. fan clamps of

92 2 shape and size as specified in existing R.C.C. 168.53 Each

slab including cutting chase and making good.

Cutting out cracks of roof terrace to V-section,

93 2 cleaning out, wetting, grouting with cement and 64.58 Rmt

sand slurry 1:3 (1-cement 3-sand )

Cutting out cracks roof terrace to V-Section

cleaning out and filling solidly with a hot

mixture of bitumen and clean dry sand (1:1 by

Providing & Fixing in position Alluminium

doors with frame using approved quality

anodised extruded alluminium section as

approved by Engg.in charge(Jindal alluminium)(a)

Frame sections 101.6x44.45 mm (b)

Shutter bottom vertical & top section

95 2 Shutter bottom section at 114.3x44.45 mm at (1.37 2,900.00 Sq. M.

kg/mt) Shutter middle section at 100x44.3 wt.(1.37

kg/mt) incl.providing & installing 5 mm thick

approved color Acrylic sheet of standard

quality fixed with glazing chips on upper pannel

& Laminated sheet on lower pannel (wtt.0.13

kg/Rmt) etc.comp.as direction of engg.in

Providing & Fixing in position Fully Panelled /

Partly Panelled Partly Glazed / Fully Glazed

Alluminium doors with frame using approved

quality anodised extruded alluminium

section as approved by Engg. In charge.(Jindal

alluminium )(a) Frame sections 101.6x44.45 mm

b) Shutter vertical & top section 83.5x44.45

96 2 (wt. 1.31 kg/mt.)( at 1.31 kg/mt) © Shutter 4,583.00 Sq.M.

bottom section at 114.3 x44.45mm at ( 1.37 kg/mt

) Shutter middle section at 100x44.3 wt. (1.37

kg/mt ) incl. providing & installing 5 mm thick

Glass of standaed quality fixed / 12 mm

thick Laminated sheet with glazing chips (wt.

0.13 kg/ Rmt) in panels etc. comp. as per

Detail Given & direction of engg.in charge.

Providing & Fixing in position Alluminium

window 2/3/4 track sliding / fix type with

frame using approved anodised extruded

97 2 alluminium section as approved by Engg. In 4,518.00 Sq. M.

charge.(Jindal alluminium) units equivalent.

including P/F installing 5 mm thick clear/tinted

Glass of standard quality etc.comp.

Providing & Fixing in position Alluminium vents

with frame using approved anodised extruded

alluminium section as approved by Engg. In

98 2 charge.(Jindal alluminium) units equivalent Frame 4,218.00 Sq. M.

section of 63.50 x 38.50 mm. (wt.0.68 Kg/Rmt)

incl. Providing & Installing 5 mm thick Glass

of standard quality etc. comp.

Providing and fixing of Ridge flashing for

roof panel shall be made out of 0.5 mm

thick pre coated GI sheet. The Pre coatedsheet

shall be of minimum 240 mpa steel grade

confirming to IS 14246:1995 and shall have zinc

coating of minimum 120 gsm as per

IS:277:1992, 5-7 microns epoxy primer on

99 2 both side of the sheet and polyester top coat 15- 510.1 Sqm

18 micron. The PP GI Sheet shall have

plastic protective guard film of minimum

microns to avoid scratches during

transportation. The ridge shall be fixed to the steel

members by poprivetor self drilling/self

stitching fastners @ maximum 450mm c/c along

length of capping/flashing etc complete .

Supplying and fixing vinyl flooring over the

surface having 1-2 mm thickness as per

100 2 directed by engineer incharge etc as

completed (N.S.)

Providing and laying 15mm bamboza

wooden flooring as per architect's drawing

with all necessary details as directed by the

101 2 project consultants. Use underlay for better

result as per Detail specifications and directed by

the project consultants. (N.S.) Approved Rate )

Providing and fixing 1.20 Metre high fencing

with 2.0 Metre long M.S. Angle posts 40 mm x

mm x 6 mm and oil painting 3 coats fixed at

2.5 Mt, C/c. with five Horizontan lines and two

102 2 diagonals of galvanised steel barbed wire 385.4 Rmt

weighting 9.38 Kg. per 100 Metre, strained and

fixed to posts with G.I, staples including fixing

the posts in ground with 0.5 M x 0.5.M x 0.5 M.

block in C.C 1:5:10 etc complete.

Renovation and Repairing work in Chainlink

fencing any size and also refixing work incl.

103 2 febrication work with all materails to be 735 Rmt.

painted one coat of primer and twocoats of

paint as directed inline and level. (N.S.)

Constructing a sink (chowkedi) with C.C. 1:2:4,

12 cm. thick over B.B. masonry in C.M, (1:6) in

104 2 front and dwarf wall 1.0 Mt. high and 23 cm. thick 2235.66 Rmt

cement plaster to masonry / in C.M.1:3) and

cement concrete flooring in 1:2:4: mix

Constructing a cooking platform 60 cm. width and

70 cm high resting on B.B. Masonry walls 23 cm.

thick in C.M. (1:6) with (i) Fixing or precast

105 2 R.C.C. 1:2:4) 8 cm. thick slab with marble chips 933.98 Rmt

set in C.M. (1:6) (6 mm thick terrazo) with

plastering on exposed faces walls in C.M. (1:4)

Extra rate for using Ready Mix Concrete of

any grade for below ground level to vertical

upto any floor with delivery & suction Pipe & Pump

106 2 etc. The rate includes fule, pump operator, skilled

labor, driver etc completed and as per direction of

engineer in charge

P/A Tremix with dewartering machine and

floater machine on constructed CC work for

finishing the surface as per requirement. The

107 2 rate including all machinaries, labor, loading,

unloading, transportaion etc complete as per

direction given by engineer incharge.

Carrying out timber treatment to all wood work

including drilling holes and spraying oil based

chemical solution on surface of timber work for

termite control including labor and material etc.

complete. Using Chlorpyriphos20 EC as per

2013 Part III (1% concentration by mass) is

recommended one litre chemical emulsion diluted

with 19 liters of kerosene. Total diluted

concentration will be 20 liters inclusive of 1 liter

chemical emulsion application in drilled holes and

0.75 / Litre chemical per one Sqmt two coat on

wood surface not protected by paint or varnish.

Applying general insecticide pest control treatment

to floors, cupboards etc including labour materials

etc. complete. Using Imidacloprid 30.5 SCas Per IS

109 2 6313 part -II( (0.075% concentration by mass) is 88.4 Smt

recommended 10.5ml chemical diluted with 5 liters

of water application 0.5 litre chemical /Sqm of,

surface is recommended as per I.S.

Carring out plinth treatment to post construction /

existing structure by spraying chemical solution

for termite control treatment including labour and

material consist ment with I.S.specification. Using

Chlordene and Chior purfiles 20 EC. As Per

110 2 6131_paret-II Consentration Weight on percentis 104.9 Smt

recommended i.e one litre 20 EC chemical

emulsion with 19 liter give 1% concrentration

inclusive of one litre chemical emulsion appication

attherate of 5 Litre chemical /Sqm of surface is

recommended as per I.S

Carrying out wall treatment for termite control

including spraying with chemical solution in oil base

including labour and material Using Chlorpyriphos

20 ECAs per IS 6313 part - II (1% concentration by

111 2 mass) is recommended i.e one litre chemical.. 37.34 Smt

emulsion diluted with 19 liter oil base. Total solution

will be 20 liters inclusive of one liter chemical

emulsion application at the rate of 7.5 litre chemical

/ Sqm of surface is recommended as per I.S.S

Providing erecting and fixing double coated

Syntex or equivalent PVC.(ISI) water tank of

112 2 3.91 Litre

required capacity each with all necessary fittings

and connection etc. complete on terrace.

Providing and fixing to wall, ceiling and floor

galvanised Mild steel tubes (Medium grade)

113 of the following nominal bore, tube fitting and

clamps including making good the wall ceiling and

2 (F) 50mm 779.6 Rmt

Providing and laying in trenches galvanised

mild steel tubes (Midium grade) of the

114 following nominal bore, and tube fitting (Earth

work in trenches to be measured and paid for

Making connection of galvanised Mild steel

distribution branch with galvanised mild steel main

115 2 50 mm to 80 mm nominal bore by 600.08 Each

providing and fixing tee including cutting and

threading the pipes complete.

Providing and fixing to wall ceiling and floor

Kg.F/Cm2 working pressure poluthene pipes of

the following out side Dia. Low densidy, complete

with special falnge compression type fittings,wall

clips etc. including making good the wall ceiling and

Providing and fixing to wall ceiling and floor

Kg.F/Cm2 working pressure polythene pipes of

117 the following out side Dia Low densidy, complete

with special falnge compression type fittings, wall

clips etc. including making good the wall ceiling

2 (C) 32mm 116.4 Rmt

Providing and fixing cast iron (Spun) Nahni

trap of the following nominal diameter of self

118 2 cleaning design with C.I. screaed down or higned 600.08 Each

grating including cost of cutting and making

good the walls and floor 100 mm inlet and 50 mm

Providing and fixing water closet squatting

Pan (Indian type W.C.Pan) size 580 mm

119 2 (Earth work, bed concrete, foot rest and trap to 926.1 Each

be measured and paid for separately) (A)

Vitreous China. (I)Long pattern = White colour

Provdg. & fixing wall mounted White / Color

Vitreous China European water closet with

120 2 integral P trap of "Cera" - Clair Series or 4,250.00 No.

equivalent incl. seat cover , Chair Bracket etc.

complete as per direction of engg. In charge.(N.S.)

Providing and fixing wsh down water closet

(Europe an type, W.C.Pan) with integral P or S

trap including jointing the trap with soil pipe in

121 2 Cement Mortar1:1 (1- Cement:1-fine sand) 1290.8 Each

(Seal and cover to be measured and paid

forseparately) (A) vitreous China Pattern :(i) in

Provdg. & Fixing Flat Back Large Urinal of White/

colour of "Cera" or " Hindware" incl. C.P. Brass

122 2 waste coupline , waste pipe, 1,850.00 No.

pvcconnection etc. Complete.( size

Providing & Fixing Angle cock of " Ess Ess" -

Trend series or equivalent standard make

123 2 as approved by engg. in charge all complete.

Providing and fixing 100 mm size P or S trap

for water closet squatting pan including jointing

124 2 the trap with the pan and soil pipe in cement 311.85 Each

Mortar1:1 (1-Cement : 1-Fine sand)(A) Vitreous

Providing and fixing wash basin with single hole

for pillar tap with C.I.or M.S. brackets painted

white including sutting holes and making good the

same but excluding fittings. (A) Vitreous China:

(ii) Flat Back wash basin 550 mm x v 400 mm

size.(i) In white colour.

Providing and fixing Kitchen sink with C.I. or M.S.

brackets, painted white including cutting holes

126 2 in walls and making good the same but 2257.69 Each

excluding fittings. © Vitreous China Sink. (i)

mm x 450 mmx 150 mm size

Providing and fixing 600 mm x 450 mm bevelled

edge mirrror of superior glass mounted on

127 2 mm thick A.C. sheet or ply wood sheet and fixing 825.48 Each

to wooden pluge with C.P. brass screws and

Providing and fixing chromium plated brass halftrun

128 flush cock of approved quality including fixing in

pipe line etc. complete.

Provdg. & fixing White / Color Vitreous china

Counter wash basin with signle hole for pillar tap

of "Cera " - Concord series of 550 x425 mm size

to be fiited in stone counter with necessary

brackets painted white incl. cutting holes and

129 2 making good the same .Cost Includes P/F C.P.

brass waste coupline, 32 mm dia fisher union

mm dia. Pillar cock & Angle cock of " Ess Ess"-

Trend series ,32 mm dia. Waste pipe etc.

complete as per dir. of engg. in charge.

Providing and fixing washbasin with single holefor

pillar tap with C.I. or M.S. brackets painted white

including sutting holes and making goodthe same

130 2 but excluding fittings.(A) Vitreous China:(ii) Flat

Back washbasin 550 mm x v400mm size. (i) In white

Providing & Fixing S.S.304 Grade Sink of Nirali /

131 2 Krishna or Equivalent Make for Kitchen Platform of 4,650.00 No.

size : 24":x18" as per Direction of engg. In charge

Providing and fixing C.P. brass towel rail

comlete with C.P.brass brackets fixed to

wooden plugs with C.P. brass scews.(B) 600mm

Providing and fixing 600 mmx120 mm glass

shelf with C.P. brass bracket and guard rail

complete mixed to wooden plug with C.P.brass

Providing and fixing toilet paper holder. (A)

Providing and fixing screw down bib taps of

135 following size. (A) Brass screw down bib tap

polished bright.

2 (i) 15mm dia. 184.98 Each

2 (ii) 20mm dia. 212.68 Each

Providing and fixing screw down bib taps of

136 following size. (B) Brass chromium plated screws

2 (i) 15mm dia. 184.98 Each

2 (ii) 20mm dia. 212.68 Each

Providing and fixing screw down bib taps of

following size. © Gun metal screw down bib tap.

2 (i) 15mm dia. 157.29 Each

2 (ii) 20mm dia. 176.09 Each

Providing and fixing pillar tap, capstan head,

138 screw down high pressure with screws, shanks

2 (i) 15mm dia. 305.67 Each

2 (ii) 20mm dia. 351.18 Each

Providing and fixing Gun metal check or non-

return fullway wheel valve.

2 (i) 15mm dia. 184.98 Each

2 (ii) 20mm dia. 201.8 Each

2 (III) 25 MM DIA 416.47 Each

2 (E) 40mm dia 656.86 Each

Providing and fixing chromium plated brass

140 half trun flush cock of approved quality including

fixing in pipe line etc. complete.

2 (i) 20mm dia. 252.26 Each

2 (ii) 25mm dia. 261.16 Each

2 (iii) 32mm dia. 273.03 Each

Providing and fixing Urinal or approved qualit

including conecting the Urinal with waste pipe, tap

141 2 etc.complete. (A) White earthen ware flat back 1026.01 Each

or corner type size 430mm x 260mm x

Providing and fixing Urinal of approved

quality including connection with trap and

142 2 with integral longitudinal flush pipe. (A) Squating 1535.63 Each

plate pattern white earthen ware 550mm x

Providing and fixing chromium plated, bottle

143 2 trap with necessary couplings of approved quality 292.87 Each

for wash basin.

Providing and fixing ball cock ofapproved quality

as directed. (A) Copper Metal (i) 25mm dia.

Providing and fixing ball cock of approved

quality as directed. (B)Abonite (i) 25mm dia.

Filling with good Quality thor as and where

directed by the Architect / Engineer-in-charge,

146 2 in sunk in layers of 15 cm. thickness, including 3,850.00 Cmt

watering, ramming well etc. complete, as

directed by the Architect / Engineer-in-charge .

Providing laying and jointing in true line and level

mm dia. U.P.V.C. Pipe (SCH-40) for cold

water including fittings make PRINCE/

SUPREME/ ASTRAL/ FINOLEX or equivalent as

approved by Engineer In Charge. Pipe shall be

147 2 fixed on the wall with the help of clamp at 71.93 Rmt

every two metre C/C or shall be concelled as

directed including necessary fittings etc.

including testing of pipe and joints and fixing the

same with solvent, including cost of all

materials.adhesive

Providing laying and jointing in true line and level

mm dia. U.P.V.C. Pipe (SCH-40) for cold

water including fittings make PRINCE/

SUPREME/ ASTRAL/ FINOLEX orequivalent as

approved by Engineer In Charge. Pipe shall be

148 2 fixed on the wall with the help of clamp at 90.93 Rmt

every two metre C/C or shall be concelled as

directed including necessary fittings etc.

including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of

Providing laying and jointing in true line and level

mm dia. U.P.V.C. Pipe (SCH-40) for cold

water including fittings make PRINCE/

SUPREME/ ASTRAL/ FINOLEX or equivalent as

approved by Engineer In Charge. Pipe shall be

149 2 fixed on the wall with the help of clamp at 117.97 Rmt

every two metre C/C or shall be concelled as

directed including necessary fittings etc.

including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of

Providing laying and jointing in true line and level

mm dia. U.P.V.C. Pipe (SCH-40) for cold

water including fittings make PRINCE/

SUPREME/ ASTRAL/ FINOLEX or equivalent as

approved by Engineer In Charge. Pipe shall be

150 2 fixed on the wall with the help of clamp at 146.65 Rmt

every two metre C/C or shall be concelled as

directed including necessary fittings etc.

including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of

Providing laying and jointing in true line and level

mm dia. U.P.V.C. Pipe (SCH-40) for cold

water including fittings make PRINCE/

SUPREME/ ASTRAL/ FINOLEX or equivalent as

approved by Engineer In Charge. Pipe shall be

a 2 fixed on the wall with the help of clamp at

every two metre C/C or shall be concelled as

directed including necessary fittings etc.

including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of

Providing in line level plumb, fabricating

and fixing three row horizontal barbed wire

fencing and punched tape concertina coil of

turns per meter of 610 mm dia fixed with clips on

top of the angle iron posts. The punched tape

concertina coil having sharp barbs at every

mm spacing shall be 0.5 mm thick and 19 mm

151 2 width and weighting 13 kg/100 mt. (Average) as per 390 Rmt

manufacture's specification. The rate shall

also include providing and fixing 1.20 mt.total

long MS angle 40 x 40 x 6 mm @3.00 mt.c/c

spacing embaded in RCC column, angle posts

shall be painted with one coats of red oxide and two

coats of enamel paint of approved quality at top

Fixing sun film for protection sunlight in black or any

152 2 colour as as directd by engineer In Charge.(Market 850 Smt

Providing & Fixing 3 mm thick F.R.P.sheet of

Approved Quality & Color / Pattern as per

Consultant's design also includes required

fabrication structure in the grid of 2'-0x2'-0 size

using hollow pipe of16 gauge & size 2"x1" &

153 2 1"x1" ,G.I. & Bitumen Washers, Silicon paste 1,930.00 SqM

application for fixing the sheet . Rate also

includesnecessary bending, cutting, labor charges

, Zinc Primer coat & Two coats of oil painting of

color as approved by consultants & making

good the wall. (N.S.)

Providing 2 mm thick F.R.P. Gutter with necessary

154 2 M.S. Supporting Brackets. (N.S.)

Hiring charges for J.C.B.machine inclduing cost

155 2 of fuel, operator, dirver etc.. ( 12 hours 600 Hrs.

sift day/night) (N.S.)

To provide tractor with hydraulic trolley, driver,

Nos. of Labor with all tools like bucket drum,

showels, trikam, pavadas, etc, to carryout different

156 2 works during monsoon for 12 Hrs. Shift. Work 1,661.02 No.

shall be carried out as per the instrucitons of

Engineer In-Charge.No extra charged shall be paid

for night shift.

Roller Blind Providing and fixing Roller Blind

curtain fixed on window level on wooden batten

and curtain lift with cotton thin rope, make of

157 2 aerolax or equivalent design and colour as per 3,285.00 Smt

instruction by engineer – in – Charge with

necessary hardware fitting, material and labour

Providing & Fixing Door closer - Door closers

158 2 (Heavy type of 765 number) Hardwire or Everite 474.58 No.

Prabhat or Equivalent

Providing and fixiing M.S. Fan clamps type 1 of

mm dia M.S. bar bent to shape with hooked ends of

159 2 R.C.C. slabs during laying incl. painting the exposed 124.74 No.

protion of loops, all as per standard design

Providing cement vata (10cm. x 10 cm. size) quarter

160 2 round in cement mortar 1:1 including neat cement 23.45 Rmt

finishing, watering etc. complete.

Making Water connection from exi.Muni. Water line

Providing and applying fibere reinforced

cementitious micro concrete work in cellings and

beams incl.mixture of CEMSCREED HM (F) fair

mate company material, FBR bonding agent

162 2 material with water in suItable proportion anti 530 Smt

corrosive treatment on exposed beam,celling steel

bars with safeCore R incl.all kind of labour

etc.comp.including three coat of white

wash.(Approved Rate)

Providing and Fixing 1 H.P. Electrical monoblock or

submarcible water pumps withmotor and required

163 2 cable and switch board of approved brand and

make etc.comp.as directed.

.Providing TMT Bar FE 415 reinforcement for R.C.C.

163 a 2 work including bending, binding and placing in 66.59 Kg.

position complete up to floor two level

ProvidingTMTBarFE500/500Dreinforcement for

R.C.C.workincluding bending,binding and placing in

b 10 position complete upto floor two level placing in 75.46 Kg.

position complete upto floor two level placing in

position complete upto floor two level

Providing and fixing 30mm thick solid both side

prelam PVC door shutter (sintex door-equivalent)

164 2 with necessary alluminium fitting with EL-7 section

Conveyance charge of Earth,Lime, Murrum, building

rubbish earch manure or sludge and excavated rock

and fly ash,aggregate of any kind etc.comp.upto

Providing and laying polished granite stone slab

mm thick in risers of steps, dedo and pllars laid on

166 2 10 mm thick cement mortar 1:3 (1 cement:3 coarse 2,690.00 Smt

sand) and jointed with gray cement slurry including

rubbing & polishing etc.complete.

Wall panelling with 12 mm MDF fixed to existing

alluminium framing and making grove as per

167 2 design and finished with royal plastic paint as per

instruction of engineer incharge. (N.S.)

Providing and laying 15mm bamboza

wooden flooring as per architect's drawing

with all necessary details as directed by the

168 2 project consultants. Use underlay for better

result as per Detail specifications and directed by

the project consultants. (N.S.) (Approved Rate )

Applying two coats of Birla (whitecementbased) or

Asian (acryliclapy-putty) or equivalent & two coats

of primer of approved brand and manufacture on

new wall surface to give an even shade including

thoroughly brushing the surface free from mortar

Finishing wall with weather proof exterior emulsion

paint on wall surface (two coats) to give an required

170 2 shape evenshade after thoroughly brushing the 113.4 Sq.M.

surface to remove all dirt, and remains of loose

powdered materials.etc complete

Providing and fixing flush door shutters, solid

core construction with frame of first class

hardwood with cross board and face veneer or

plywood face panels, with both side 1 mm

laminate finishing including anodized aluminum

butt hinges with necessary screws. Decorative

type and pine wood core anodized minimum

no 150 mm long aluminum butt hinges in flush

door shutters with 2 no of brass holdfast

171 2 mm long 1 no brass tower bolt 250 mm long and

two no of 150 mm long brass door handle .

Decorative both side laminated Flush door 35 mm

thick. with frame of 10 cm x 7 cmt Indian teak

wood frame including all necessary fitting

fixtures hardware screw and adhesive etc fixing

up to all lead and lift height up to 45 mtr from GL

etc complete as per direction of engineer in

P/M/F chainlink jali 8'x4' size as per details sketch &

instructionof engineer in charge same as lal darwaja

garden pattern consisting of 3'dia. M.S black pipe 'A'

class 5'4" ht. fixed at 8'9" c/c in C.C 1:2:4 block of

9"x9"x9" size chain link jali of size 2"x2"x10 gauge

172 2 fixed in 35x35x5 mm MS angle frame 8'x4' size with 1,230.00 Rmt

MS flat of size 25x3 mm welded jali etc.comp.The

jali is to be welded to MS pipe with MS flat as

instruction given.The M.S pipe and the M.S angle

frame are to be painted one coat of primer and two

coats of paint as directed in line and level. (N.S)

Providing & Fixing masonary wall with porbandar

lachiya stone with well dressed grooveas per

directed by engg.in charge for foundation, plinth or

super structure level (above plinth level upto floor

173 two level) in cement mortar 1:5 (1-cement : 5-fine

sand) incl.pointing the joint with white cement and

yellow oxide powder in proportion to match stone

colour the joints should be thread grooved as per

exi. lake stone pitching apperance

(A) stone masonary wall/stone dressed single faced

2 (size 15"x8"x9")

2 (B) stone coping (size 15"x8"x4") 510 Rmt

2 (C) stone coping (size 15"x8"x9") 790 Rmt

2 (D) stone column (size 15"x15") 10,710.00 Cmt

2 (E) stone column top (size 20"x20"x9") 685 No.

Supplying and fixing of 300 mm-L x 15 mm-B x

380 mm-H Kerb block for Footpath in M-20

grade using 20 mm nominal size black trap

aggregate of Sevaliya/Timbaor equivalent

quality for pre-cast blocks,

reasonablyexposed finish/ formwork

mould with well equippedwith vibratory system

for kerb stones of approved design including

curing, etc. complete, including thecost of

formwork etc. complete. The rate shall also

174 2 include necessary cutting of asphalt, fixing 393 Rmt

the Kerbstones in line and level on 5 cm thick

sand bedding withnecessary

equipments and materials. The rate shall also

include the flush pointing in CM (1:3) for all joints

of thekerbstones. Filling of zari alone the sides of

the kerbstone fixed with Bituminous

concrete Bituminousconcrete / C.C. mixed in

proper position to flush withthe road surface

as dire Engineer incharge, manufacture’s

specification and

Providing and Laying of Rubber Moulded Paver

Block Grey/Coloured 60 mm thick, M-35 Grade of

any size shape (Usually Uni-Paver Blocks) using

black trap good quality aggragate of 20 mm nominal

size for footpath,parking areas, service lanes and

other areas as mentioned in the drawing / instruction

of engineer in charge. Cost includes formworks

using rubber mould, Rate providing and laying paver

blocks as per required grading and specification.

The paver block shall be mechanically compacted.

175 2 The work of paving blocks shall be executed in line 429 Smt

and level by skill mason of flooring work only. It

should be laid in such a way that the no cutting of

the paver block to be necessary. if cutting of paver

block necessary then it should be cut by machine

only and carting. The finished surface of the paver

block shall have resonably good, plain finished.

Paver blocks shall be compacted and shall be relaid

if necessary. Gravel or such type of materials shall

not be allowed for production. Laying on 5 cms thick

Provoding and fixing flush door shutters, solid core

construction with frame of first class hard wood with

cross board and face veneer or ply wood face

panels, including anodised alluminium butt hinges

with necessary screws. (B) Non- decorative type

and block board core anodised alluminium butt

hinges in flush door shutters (2) 35 mm thick.

Labour work for fixing any kind of paving with

cement pointing in CM 1:2, including watering,

ramming etc comp. as dir.For pavement

I) Laying on Sand bedding as per requirement to fix

177 2 the C.C.Block / Nibhada Stone in Line & Level

Box type metal letters forming composite box made

from 1mm thick stainless steel plate of grade

having brush finish of following font size to be fixed

at Main Gate in english and or Gujrati and including

fixing charges approved before fixing by clent /

A 2 400mm high 1,000.00 Nos.

B 2 300 mm high 750 Nos.

C 2 230 mm high 565 Nos.

Providing and fixing false ceiling at all height

including providing and fixing of frame work made of

special sections, power pressed from M.S. sheets

and galvanized with zinc coating of 120 gms/sqm

(both side inclusive) as per IS : 277 and consisting

of angle cleats of size 25 mm wide x 1.6 mm thick

with flanges of 27 mm and 37mm, at 1200 mm

centre to centre, one flange fixed to the ceiling with

dash fastener 12.5 mm dia x 50mm long with 6mm

dia bolts, other flange of cleat fixed to the angle

hangers of 25x10x0.50 mm of required length with

nuts & bolts of required size and other end of angle

hanger fixed with intermediate G.I. channels

179 2 45x15x0.9 mm running at the spacing of 1200 mm

centre to centre, to which the ceiling section 0.5 mm

thick bottom wedge of 80 mm with tapered flanges

of 26 mm each having lips of 10.5 mm, at 450 mm

centre to centre, shall be fixed in a direction

perpendicular to G.I. intermediate channel with

connecting clips made out of 2.64 mm dia x 230 mm

long G.I. wire at every junction, Engineer

incharge, manufacture’s specification and

Providing & Fixing SPEED BUMP - #2 No (1 black,

1 yellow) 350 x 500 x 50 mm, Size per color End

Cape 350 MM x 175 MM x 50 MM TOP DESIGN -

Lining Top flat ANTI SKID PATTERN FOR GRIP

COLOUR :- YELLOW & BLACK BODY MATERIAL

:- MODIFIED THERMOPLASTICS (Polymer

180 2 Rubberized ) • ECO FRIENDLY RECYCLE

RUBBER Packing :- 4 pcs/ woven Bag Load

Capacity :- 20 MT Fitting ( Fixing on TRAKE) :-4

holes & END CAPE :- 2 HOLE HEX Bolts with

Washer Epoxy for Bolt Fitting etc. complete as

directed by EIC .

Providing and fixing of Roller blind curtain/blackout.

The fabric shall be woven from formulated platisol

extruded over a polyaster yarn.The fabric shouldl be

181 2 weaved to provide subtle view of the side of the 2,610.00 Smt

blind and should offer elimination of glare and

sunlight radiance upto a minimum of 80%.The fabric

shall be flame retardant.

Providing and fixing PVC/Gpsysum plain colour

false ceiling with grid type with aluminium

frame from gypsteel, fastners ,props, Finishing as

per architectural drawing allowing openings

182 2 for A.C. Diffusers, Light/Electrical Points etc

–complete, Prior to fixing on frame.(Brand :

Anutone or equivalent ) (N.S.) or as directd by

engineer In Charge.

Provdg. & laying S.W. Gully trap with brick masonry

chamber & water tight G.T.Stone including fixing of

183 2 covervSquare mouth trap 100 mm x100 mm size P-

Providing cement vata (10cmx10cmsize) quarter

184 2 roundin cement mortar 1:1 including neat cement 23.45 Rmt.

finishing, waterin getc. complete.

Providing and laying (to level or slopes) and jointing

with stiff mixture of Cement Mortar in proportion 1:1

Salt glazed stoneware pipes including testing of

pipes and joints complete.(A) 100mm dia.

Providing and laying (to level or slopes) and jointing

with stiff mixture of Cement Mortar in proportion 1:1

Salt glazed stoneware pipes including testing of

pipes and joints complete.(B) 150mm dia.

Constructing brick masonry chamber for

underground C.I. Inspection chamber and bends

with bricks having crushing strength not less than

35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light

duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame 15Kg. )

187 2 (R.C.C. top slabe with 1:2:4 mix (1-cement :2- 2903.89 Each

coarse sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a

floating coat of neat cement on walls and bed

concrete etc. complete.(i) Inside dimensions

455mmx 610mm and 450mm deep for single pipe

Constructing brick masonry chamber for

underground C.I. Inspection chamber and bends

with bricks having crushing strength not less than

35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light

duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame 15Kg. )

(R.C.C. top slabe with 1:2:4 mix (1-cement :2-

coarse sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a

floating coat of neat cement on walls and bed

concrete etc. complete.(i)Inside dimensions 500mm

x 700 mm and 450mm deep for pipe line with one or

Providing, supplying and fixing precast C.C. blocks

(M-20) edge kerb having size of 75 x 300 x 300 mm

depth and as per design conveying it to the site,

189 2 jointing into C:M 1:3 and racking out the joints incl.

necessary excavation of asphalt, soil

etc..completed.

Constructing a cooking Sandwich platform 60 cm.

width and 70 cm high resting on B.B.Masonry walls

23 cm.thick in C.M.(1:6) with (ii) Fixing black

190 8 Granitee 30mm thick laid on precast R.C.C. (1:2:4)

slab with plastering on exposed faces of wall in C.M.

(1:4) etc complete

Providing and fixing hard drawn steel wire fabric

75mm x 25mm mesh or weight not less than

kg. per Sq.M. to window frames etc. including60 x

20mm beading of teak wood.

Providing & fixing 15 cm wide chicken mesh jali with

nails & then application of 15 mm plaster on

192 8 R.C.C.& masonary joints as per dir.of engg.in

Providing and laying cement concrete flooring 1:2:4

(1-cement : 2-coarse sand : 4-graded stone

193 8 aggregate 20mm nominal size) laid in one layer and 348.08 Smt.

finished with a floating coat of neat cement. (A)

Providing and constructing, Underground (U/G)

water tank of specified capacity, on specified

location, for all depths, in controlled CC of M-200

grade with bottom slab, top slab and RCC walls,

including cost of form work and reinforcement, with

inside and outside plaster in CM 1 :3 and water

194 5 proofing treatment as per IWP specification,

including injection, grouting, etc. complete. The rate

includes for providing and fixing two nos. 0.6m. x

m. size medium duty CI manhole cover/s at top,

including wash out pipe line and inlet and outlet

connections etc. complete.

Providing and fixing PVC Printed pain colour false

ceiling with grid type with alluminium frame

consisting of 600mm x 600mm 3mm thick plain PVC

sheet used as panel insert in a frame work made

using anodized alluminium T section of size 1 x

(235 x 25mm, 19 gauge or 1 mm thick) in square

pattern of grid sizes of 2 x 2 (600 x 600mm) The

195 5 alluminium frame work is supported from the 300.12 Smt

cceiling with the help of G.I. hook and G.I. wire/6mm

M.S. rods of required sizes to maintain proper level

etc. The aluminium frame work is supported on side

wall with the use of alluminium L section of size 1 x1

(25 x 25mm) angles etc. complete as per direction

of Engineer in charge. Manufactures specification

Providing and supplying of labour for necessary

manual excavation, cleaning, Shifting of Material Or

196 5 any other, or for any other work as directed by 551 No

Engineer In charge. The Rate includes Handcart

A 5 Mukadam/supervisior/karigar 425 No

B 5 Fitter/Plumber/Mason 697 No

C 5 WELDER/ Gas cutter at Day /night 689 No

Supplting of welding machine / gas cutter including

D 5 cost of welding rods/gas, Transportation, including 1500 No

carting from site to work place.

E 5 Mazdoor at Day Female 450 No's

E 5 Mazdoor at Day Male 493 No's

Supplying electric breaker machine for RCC slab or

asphalt demolishing work on site by using operator,

fuel, power supply etc.complete as directed. (no

197 5 payment should be allowed for non working 1071.42 Shift

condition of machinery and for pipe line excavation

and M.H. work. Allowed only for break down work)

(Based on Previously approved rate by CE sir )

Providing and fixing concealed center point to wall

ceiling & floor CPVC (SDR 13.5) PIPE having

National Sanitation Foundation (NSF) seal for

198 potable water of following dia. Nominal bore tube

fittings and clamps including making good the wall,

ceiling and floor etc. complete.

A 2 15 MM DIA 165.21 Rmt

B 2 20 MM DIA 202.97 Rmt

C 2 25 MM DIA 247.25 Rmt

D 2 32 MM DIA 330.36 Rmt

E 2 40 MM DIA 437.66 Rmt

199 2 50 MM DIA 647.3 Rmt

Supplying and fixing C.I. cover 300mm x 300mm

200 2 without frame for Gulley trap (Standard pattern) te 491.8 Each

weight of cover to be not less 4.53 Kg.)

Providing and fixing to wall ceiling and floor

10.0Kg.F/Cm2 working pressure polythene pipes of

the following out side Dia Low densidy, complete

201 with special falnge compression type fittings, wall

clips etc. including making good the wall ceiling

Filling available excavated earth(excluding rock) in

trenches. plinth, sides of foundations etc. in layers

202 15 not exceeding 20 cm. in depth consolidating each

disposited layer by ramming and watering.

Filling in plinth with sand under floors including

203 2 watering ramming, consolidating and dressing 455.63 cumt

Filling in foundation and plinth with murrum or

204 3 selected soil in layers of 20cm. thickness including 286.2 cumt

watering, ramming and consolidating etc. complete

Filling in Sunken Portion with good Quality Aerated

light weight concrete block having crushing strength

not less than 35 kg/sqcm and where directed by the

205 2 Architect / Engineer-incharge, in sunk in layer. 4559.61 cumt

including watering, ramming where it is required etc.

complete, as directed by the Architect / Engineer-in-

Providing and applying fibre reinforced elastomeric

liquid water proofing membrane with resilient acrylic

polymers having Sun Reflectivity Index (SRI) of

on top of concrete roof in three coats @10.76 litre/

10 sqm. One coat of self-priming of elastomeric

waterproofing liquid (dilution with water in the ratio of

206 1 3:1) and two coats of undiluted elastomeric 562.4 sq mt

waterproofing liquid (dry film thickness of complete

application/system not less than 500 microns). The

operation shall be carried out after scrapping and

properly cleaning the surface to remove loose

particles with wire brushes, complete in all respect

as per the direction of Engineer-in- Charge.

Providing and laying integral cement based water

proofing treatment including preparation of surface

207 1.392 as required for treatment of roofs, balconies, 1150.48 sq mt

terraces etc consisting of following operations:

(a) Applying a slurry coat of neat cement using

kg/sqm of cement admixed with water proofing

compound conforming to IS. 2645 and approved by

Engineer-in-charge over the RCC slab including

adjoining walls upto 300 mm height including

cleaning the surface before treatment.

(b) Laying brick bats with mortar using broken

bricks/brick bats 25 mm to 115 mm size with 50% of

cement mortar 1:5 (1 cement : 5 coarse sand)

admixed with water proofing compound conforming

to IS : 2645 and approved by Engineer-in-charge

over 20 mm thick layer of cement mortar of mix 1:5

(1 cement :5 coarse sand ) admixed with water

proofing compound conforming to IS : 2645 and

approved by Engineer-in-charge to required slope

and treating similarly the adjoining walls upto

mm height including rounding of junctions of walls

(c) After two days of proper curing applying a

second coat of cement slurry using 2.75 kg/ sqm of

cement admixed with water proofing compound

conforming to IS : 2645 and approved by Engineerin-

(d) Finishing the surface with 20 mm thick jointless

cement mortar of mix 1:4 (1 cement :4 coarse sand)

admixed with water proofing compound conforming

to IS : 2645 and approved by Engineerin- charge

(e) The whole terrace so finished shall be flooded

with water for a minimum period of two weeks for

curing and for final test.“All above operations to be

done in order and as directed and specified by the

Engineer-in-Charge :and shall be guaranteed for

minimum period of 10 years after handing over the

completed building by the main contractor to be

finished as directed. Stamp paper guarantee

years to be furnished before receiving any payment

from the client.

With average thickness of 120 mm and minimum

thickness at khurra as 65 mm.

Rapairing of Auditorium Chair . It Including material

charges and Labour Charges For Erection And

208 20.00 Fixing Spring for smooth and easy pushback 523.00 No

Supply and Fixing of Auditorium seating Fabricate

Auditorium seating with Synchronized Push back

Chair with Ergonomically designed Poly Urethane

foam for seat and back made my DOW chemical

with High Pressure moulding technology to achieve

long life performance, upholstered with stitched

Layer 100% Yarn Dyed fabric Upholsteries. Chair

profile with the seat in Normal position and without a

tablet arm should not be more than 75 cm. Chair

pushback mechanism should consist of 2 nos. x DIA

50 mm ZYTEL Based Rollers which is supported by

AXIAL shaft of DIA 12 mm is Driven by radial

movement of 4 set of Swing Arms of size 25mm x

mm thickness with Orbital Riveted Solid Dia 8 mm

Barrel MS Rivets. The pushback movement is

achieved by synchronised movement of 04 links

209 1.00 mounted on Two Number of triangular Symmetrical 9990.00 No

housing of size 27 cm x 23 cm duly embossed for

extra strength by 1.2 cm made up by 0.12 cm CRCA

compliance to IS 513. The entire mechanism should

be made in India and should have total weight

kg duly including fixing perimeter channels 0.5 mm

thick 27 mm high having flanges of 20 mm and

mm long, the perimeter of ceiling fixed to

wall/partition with the help of rawl plugs at 450 mm

centre, with 25mm long dry wall screws @ 230 mm

interval, including fixing of gypsum board to ceiling

section and perimeter channel with the help of dry

wall screws of size 3.5 x 25 mm at 230 mm c/c,

including jointing