Miscelaneous electrical works for operationalisation of new arrival block

Amount

SITC of recessed stainless steel wash room panel consisting of automatic paper dispenser , high speed hand drier and waste receptacle suitable to working 230V, 50Hz AC supply. The cost shall include cutting and making good the wall, fixing acessories and all other requirements for instalation and commisioning as per the direction of EIC .( Make EURONICS KINOX-KMR3A OR EQUIVALENT)

SITC of fiber body Geyser of 15 ltrs capacity suitable to work on 230V, 50HZ AC supply. (Make:Havells Adonia GHWCAMTWH025 As per list of approved makes)

SITC of auto shoe shining machine made of stainless steel , long type along with one litter good quality shoe polish suitbale for 230V,50Hz AC supply complete as required.

Wiring of group controlled light point from one light to another light with 1.5 sq. mm. FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit including earthing the point with 1.5 sq. mm. FRLS PVC insulated copper conductor single core cable as required. Note:- This item does not include the cost of MCB, modular type 6A switch, GI box etc.

Supply of high bay LED lights of 80W and having luminous efficacy of minimum 100 lm/W,die cast powder coated housing including all accessories such as driver etc. complete as required.(WIPRO LH14-102-XXX-57-SM or equivalent)

Installation, testing and commissioning of prewired, LED/flourescent fittings, of all types complete with all accessories and CFLs etc. directly on ceiling/ wall, including connections with 1.5 sq.mm. PVC insulated,copper conductor, single core cable,supporting with chain/welded rods complete etc. as required.

SITC of submersible dewatering pumps for drainage ,10m head in drainage pit as per requirement including auto level and float, control panel etc. suitable work in 230 V, 1ph, ac supply complete as required .(AMA Porter 503SE or equivalent)

Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Copper conductor power cable conforming to IS 7098 (Part 1) amended upto date.. 2C 10 Sq.mm

Laying and fixing of one number PVC insulated and PVC sheathed /XLPE power cable of 1.1 kV grade of following size on wall surface as required. Upto 35 sqmm(clamped with 1mm thick saddle)

Supplying and fixing 4 way double door prewired horizontal SP&N MCB distribution board of steel sheet, IP 54, for 240 volts on surface / recess complete with loose wire box, terminal connectors for all incoming and outgoing circuits, duly prewired with suitable size FR PVC insulated copper conductor up to terminal blocks, tinned copper bus bar, neutral link, earth bar, din bar, detachable gland plate, interconnections, powder painted including earthing etc. as required. (But without MCB / RCCB/ Isolator).

Supply and fixing of 6 to 32A, 10kA, C-Curve, single pole, 230V miniature circuit breakers in the existing MCB DB complete with connections, testing & commissioning as required.

Supply, installation testing & commissioning of adaptor box for chiller/ motor of 2 mm thick CRCA sheet steel completes as required as per following size-500 mm x 380 mm x300 mm

Supply, installation testing & commissioning of adaptor box for chiller/ motor of 2 mm thick CRCA sheet steel completes as required as per following size-150 mm x150 mm x100 mm

Supply and fixing of connectors suitable for Al termial with single hole of following sizes- 63 A 4 way

Supply, installation testing and commissioning of manual change over switch suitable for rating 415 V, 50 Hz , 250 A, FP. in suitable sheet steel enclosure including operating handle, necessary auxilary contacts etc. complete as required.( make: L&T, model CO32500OSOO or equivalent)

MPC ELECTRICALS AND ENGINEERS