REPAIRS TO BEDS SOFA SETS CHARPOY GI NYLON NEWAR BED HARD STEEL CHARPOY IP HARD TOP BIN LINEN MULTI PURPOSE SIDE BOARD MAP ALMIRAH LARGE STEEL 1 2 H 1 2 S MAP CHAIR WRITING MAP CHAIR COMPUTER MAP CHAIR VERANDAH OFFICERS JCOs MAP TV TROLLY TABLE COMP

Amount

BED PLY WOOD TOP (FD-246/ 247) Removing the existing unserviceable/broken long rail and supply and fix new well seasoned hard wood (teak) long rail complete all as per measurements specified and shown on drawings and as directed by Engr-in-Charge. Ref Drg No.(FD-246/ 247)

Removing the existing unserviceable./broken complete head board with legs and supply & fix new head board with teak wood legs complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge. Ref Drg No.(FD-246/ 247)

Removing the existing unserviceable/broken complete foot board with legs and supply & fix new foot board with teak wood legs complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge.Ref Drg No.(FD-246/ 247)

Removing the existing unserviceable/broken ply wood top and supply and fix new ply wood top of size 1860mmx860mm BWR GRADE duly ISI marked of Make : Green ply/century Ply/ Kit Ply with fixing in position with suitable size screws & cup washers complete all per measurements specified and shown on drawings and as directed by Engr-in-Charge. Ref Drg No.(FD-246/ 247)

Removing the existing unserviceable/worn out/ broken plywood of head board and foot board on both sides and supply & fix new 4mm thick one side teak face plywood for head board and foot board on both sides complete all per measurements specified and shown on drawings and as directed by Engg-in-Charge. Ref Drg No.(FD-246/ 247)

Removing the existing unserviceable/broken teak wood beading for Head board and Foot board and supply and fix new teak wood beading of 12mm dia half round for head and foot board complete all per measurements specified and shown on drawings and as directed by Engg-in-Charge. Ref Drg No.(FD-246/ 247)

M&L for removing old broken / unserviceable MS bracket of Bed Hard and S&F new MS bracket of size150mmx35mmx5mm thick "L"shaped duly treated with black paint of Make: Berger/ Shalimar/ Asian complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref Drg No.(FD-246/ 247)

M & L for preparation of wood surfaces of Bed Hard by complete removal of existing treatment using grinding machine including filling of cavities by putty,filler,sealer and applying two coats of french polish to obtain glossy finish complete all as specified and as directed by Enginner-in-charge.Ref Drg No.(FD-246/ 247)

SOFA SET 5 SEATER (1+3+1) (FD- 258) WITH CUSHION M&L for removing old broken / unserviceable front legs of sofa single seat and S&F new teak wood Front legs of size 480mmx66mmx25mm complete all per measurements specified and shown on drawings and as directed by Engr-in-Charge.

M&L for removing old broken / unserviceable rear legs of sofa single seat and S&F new teak wood rear legs of size 775mmx66mmx25mm complete all per measurements specified and shown on drawings and as directed by Engg-in-Charge. Ref Drg No FD-258

M&L for removing old broken / unserviceable arms of sofa single seat and S&F new teak wood arms of size 785mmx66mmx25mm complete all per measurements specified and shown on drawings and as directed by Engg-in-Charge. Ref Drg No FD-258

M&L for removing old broken / unserviceable short rail of sofa single seat and S&F new teak wood short rail of size 610mmx66mmx25mm complete all per measurements specified and shown on drawings and as directed by Engg-in-Charge.Ref Drg No FD-258

M&L for removing old broken / unserviceable long rail of sofa single seat and S&F new teak wood long rail of size 610mmx66mmx25mm complete all per measurements specified and shown on drawings and as directed by Engr-in-Charge.Ref Drg No FD-258

M&L for removing old broken / unserviceable side rail of sofa single seat and S&F new side rail of size 610mmx66mmx25mm complete all per measurements specified and shown on drawings and as directed by Engg-in-Charge.Ref Drg No FD-258

M&L for removing old broken / unserviceable ply of sofa single seat and S&F new plywood of size 560mmx535mm of 12mm thick Make : Green ply/ kit Ply /century ply complete all per measurements specified and shown on drawings and as directed by Engg-in-Charge.Ref Drg No FD-258

M&L for Removal of old existing unsv foam cusion with tapestry cover of seat of sofa single seater and S&F 100mm thick and 40 density PU foam cushion of Make - Kurl-on/ Sleepwell/ Springwell of size 535mmx560mm covered with best quality cora cloth and tapestry cloth of Make : D'Decor / Vivid Collection/ Bombay Dying of approved shade by Engg-in-Charge/GE duly stitched with nylon zip on one side complete all per measurements specified and shown on drawings and as directed by Engg-in-Charge. Ref Drg No FD-258

M&L for Removal of old existing unsv foam cusion with tapestry cover of back of sofa single seater and S&F new one shall be fixed over to back rest duly upholsted on plywood BWR Grd made up of 100mm thick and 32 density PU foam cushion of Make - Kurl-on/ Sleepwell/ Springwell of size 535mmx560mm covered with best quality cora cloth and tapestry cloth of Make : D'Decor / Vivid Collection/Bombay Dying of approved shade by Engg-in-Charge/GE duly . complete all per measurements specified and shown on drawings and as directed by Engg-in-Charge.Ref Drg No FD-258

ditto all as per item sl No. 2.01 herein before, but for sofa set 3 seater.

ditto all as per item sl No. 2.02 herein before, but for sofa set 3 seater.

ditto all as per item sl No. 2.03 herein before, but for sofa set 3 seater.

ditto all as per item sl No. 2.04 herein before, but complete all per measurements specified and shown on drawings and as directed by Engg-in-Charge for for sofa set 3 seater.

ditto all as per item sl No. 2.05 herein before, but complete all per measurements specified and shown on drawings and as directed by Engg-in-Charge for sofa set 3 seater.

ditto all as per item sl No. 2.06 herein before, but complete all per measurements specified and shown on drawings and as directed by Engg-in-Charge for sofa set 3 seater.

ditto all as per item sl No. 2.07 herein before, but complete all per measurements specified and shown on drawings and as directed by Engg-in-Charge for sofa set 3 seater.

ditto all as per item sl No. 2.08 herein before, but tobe provided set of 3 seats for sofa set 3 seater.

ditto all as per item sl No. 2.09 herein before, but tobe provided set of 3 back for sofa set 3 seater.

Material and labour for polishing to entire sofa set 5 seater duly preparing the old and new surfaces complete all as specified and shown drawing and as directed.Ref Drg No FD-258

M&L for removing old broken / unserviceable PVC shoe of sofa single seat and S&F new PVC buffer of 25mm dia all as shown on drg. and as directed .Ref Drg No FD-258

SOFA SET 5 SEATER (FD 281/373 ) CUSHION M&L for removing old broken / unserviceable front legs of sofa single and S&F new Front legs of size 530mmx70mmx35mm all as shown on drg. and as directed .

M&L for removing old broken / unserviceable rear legs of sofa single and S&F new rear legs of size 530mmx70mmx35mm all as shown on drg. and as directed . Ref Drg No. (FD 281/373 )

M&L for removing old broken / unserviceable arms of sofa single and S&F new arms of size 725mmx35mmx70mm all as shown on drg. and as directed .Ref Drg No. (FD 281/373 )

ditto all as per item sl No. 3.01herein before but for sofa set 3 seater.

ditto all as per item sl No. 3.02herein before but for sofa set 3 seater.

ditto all as per item sl No. 3.03herein before but for sofa set 3 seater.

M&L for removing old broken / unserviceable front rail of sofa single seater and S&F new front rail of size 530mmx35mmx100mm all as shown on drg. and as directed .Ref Drg No. (FD 281/373 )

M&L for removing old broken / unserviceable front rail of sofa three seater and S&F new front rail of size 1590mmx35mmx100mm all as shown on drg. and as directed .Ref Drg No. (FD 281/373 )

M&L for removing old broken / unserviceable wooden frame for back of sofa three seater and S&F new frame of size 35mmx70mm all as shown on drg and as directed. Ref Drg No. (FD 281/373 )

M&L for removing old broken / unserviceable battons of sofa single/three seater and S&F new battons of size 560mmx20mmx50mm all as shown on drg. and as directed. Ref Drg No. (FD 281/373 )

M&L for removing old broken / unserviceable PVC shoe of sofa single/three seater and S&F new PVC shoe of best quality all as shown on drg. and as directed .Ref Drg No. (FD 281/373 )

M&L for removing old broken / unserviceable ply of sofa single seater and S&F new plywood 8mm thick Make : Green ply/ KIT Ply /century ply of size 560mmx530mm all as shown on drg. and as directed . Ref Drg No. (FD 281/373 )

M&L for removing old broken / unserviceable ply of sofa three seater and S&F new plywood 8mm thick Make : Green ply/ KIT Ply /century ply of size 560mmx1590mm all as shown on drg. and as directed . Ref Drg No. (FD 281/373 )

M&L for Removal of old existing unsv seat made up of foam cusion with tapestry cover of sofa set 5 seater and S/F set of 5 seats made up of 100mm thick and 40 density PU foam cushion of Make - Kurl-on/ Sleepwell/ Springwell of size 530mmx560mm covered with best quality cora cloth and tapestry cloth of Make : D'Decor / Vivid Collection/ Bombay Dying of approved shade by Engg-in-Charge/GE duly stitched with nylon zip on one side all as directed shall be provided. Ref Drg No. (FD 281/373 )

M&L for Removal of old existing unsv back made up of foam cusion with tapestry cover of sofa set 5 seater and S/F set of 5 back made up of 100mm thick and 40 density PU foam cushion of Make - Kurl-on/ Sleepwell/ Springwell of size 530mmx560mm covered with best quality cora cloth and tapestry cloth of Make : D'Decor / Vivid Collection/ Bombay Dying of approved shade by Engg-in-Charge/GE duly stitched with nylon zip on one side all as directed shall be provided. Ref Drg No. (FD 281/373 )

Material and labour for polishing to entire sofa set 5 seater duly preparing the old and new surfaces complete all as specified and shown drawing and as directed. Ref Drg No.(FD 281/373)

Sofa set 4 seater (Set of 4 single seats) with cushion, Ref FD-281/373M&L for removing old broken / unserviceable front legs of sofa single seat and S&F new Front legs of size 530mmx70mmx35mm all as shown on drg.

M&L for removing old broken / unserviceable rear legs of sofa single seat and S&F new rear legs of size 530mmx70mmx35mm all as shown on drg. and as directed .Ref FD-281/373

M&L for removing old broken / unserviceable arms of sofa single seat and S&F new arms of size 725mmx35mmx70mm all as shown on drg. and as directed .Ref FD-281/373

M&L for removing old broken / unserviceable front rail of sofa single seat and S&F new front rail of size 530mmx35mmx100mm all as shown on drg. and as directed .Ref FD-281/373

M&L for removing old broken / unserviceable wooden frame for back of sofa single seat and S&F new frame of size 35mmx70mm all as shown on drg. and as directed .Ref FD-281/373

M&L for removing old broken / unserviceable battons of sofa single seat and S&F new battons of size 560mmx20mmx50mm all as shown on drg. and as directed .Ref FD-281/373

M&L for removing old broken / unserviceable PVC shoe of sofa single seat and S&F new PVC shoe of best quality all as shown on drg. and as directed .Ref FD-281/373

M&L for removing old broken / unserviceable ply of sofa single seat and S&F new plywood 8mm thick Make : Green ply/ Archid /century ply of size 560mmx530mm all as shown on drg. and as directed . Ref FD-281/373

M&L for Removal of old existing unsv seat made up of foam cusion with tapestry cover of sofa set 4 seater ( SET OF 4 SINGLE SEATER ) and S/F set of 4 seat made up of 100mm thick and 40 density PU foam cushion of Make - Kurl-on/ Sleepwell/ Springwell of size 530mmx560mm covered with best quality cora cloth and tapestry cloth of Make : D'Decor / Vivid Collection/ Bombay Dying of approved shade by Engg-in-Charge/GE duly stitched with nylon zip on one side all as directed shall be provided. Ref FD-281/373

M&L for Removal of old existing unsv back made up of foam cusion with tapestry cover of sofa set 4 seater ( SET OF 4 SINGLE SEATER ) and S/F set of 4 back made up of 100mm thick and 40 density PU foam cushion of Make - Kurl-on/ Sleepwell/ Springwell of size 530mmx560mm covered with best quality cora cloth and tapestry cloth of Make : D'Decor / Vivid Collection/ Bombay Dying of approved shade by Engg-in-Charge/GE duly stitched with nylon zip on one side all as directed shall be provided. Ref FD-281/373

Material and labour for polishing to entire sofa set duly preparing the old and new surfaces complete all as specified and shown drawing and as directed.Ref FD-281/373

CHARPOY GI NYLON NEWAR / PLY TOP (FD-220): Following nature of work will be executed at diffrent unit locations including at BSO furniture yard under jurisdiction of GE(N) Secunderabad as directed by Engg-in-Charge / GE. M&L for removal of old broken/ unsv plywood of charpoy GI pipe and supply & fix new 12 mm thick BWR grade ply of size 1980mmx900mm as per IS-303 approved specification of Make: KIT PLY/ Century Ply/ Green ply on cleats welded on rails. S&F 02 Nos new Flat iron strip for each charpoy of size 900mmx30mmx5mm thick duly welded to each charpoy on two long rails togather on appropriate position of charpoy with providing new nut & bolts with washer including providing Edges of Ply should be prepared with putty for moisture resistance. New Flat Iron strip shall be painted with synthetic enameled paint in black colour over a coat of red oxided primer. Corners of plywood top should be rounded off properly before fixing on charpoy complete all as specified and shown on drg and directed by Engineer - in -Charge. Ref Drg No. FD-220

S&F 02 Nos cleats of iron angle of size 25mmx25mmx5mm, 50mm long on each long rails and 02 Nos cleats on each short rails duly running welding on approprite position as directed by Engr-in-Charge including drilling hole in each cleats duly painted with synthetic enameled paint black colour over a coat of red oxided primer.Ref Drg No. FD-220

M&L for removal of old broken/ rusted /unsv / partly serviceable long rail from existing frame of charpoy GI pipe and supply and fixing of new long rail 1980mm long made out of GI pipe 32mm nominal bore medium grade ISI marked of Make: TATA/ JINDAL/SAIL duly threaded on both sides all as specified and shown on drg and directed by Engg in Charge. Ref Drg No. FD-220

M&L for removal of old broken/ rusted /unsv /partly serviceable short rail from exiting frame of charpoy GI pipe and fixing of short rail 900mm long made out of partly serviceable part of long rail retrieved from charpoy GI pipe against Ser No. 5.05 above duly cutting, threading on both ends complete all as specified and shown on drawing. Ref Drg No. FD-220

M&L for removal of old broken/ rusted /unsv leg from existing frame of charpoy GI pipe and fixing of legs 440mm long made out of partly serviceable parts of long rail/Short rail retrieved from charpoy GI pipe against item No. 5.05 & 5.06 here-in-before duly cutting, threading complete all as specified and shown on drawing.Ref Drg No. FD-220

M&L for removal of old broken/unsv GI elbow three way from existing frame of Charpoy GI pipe and supply and fix new elbow GI three way 32mm bore medium grade Make: Unik/Jupiter metal complete ISI marked all specified and shown on drawing.Ref Drg No. FD-220

M&L for removal of broken/ unsv check nuts from existing frame of charpoy GI pipe supply and fixing new check nuts GI 32mm bore medium grade ISI marked Make: Unik/Jupiter Metal complete all specified and shown on drawing. Ref Drg No. FD-220

M&L for tightening of charpoy GI frame complete all as per drawing and Preparation of old iron surface of Charpoy GI pipe by scraping/ rubbing and apply spray painting to entire GI frame with 2 coats of synthetic enamel paint of silver shade of make : Berger/Shalimer/nerolac/ Asian complete as directed by Engr-in-chage.Ref Drg No. FD-220

Bed Hard steel w/o MNF Set (FD/E6/MAP/08 R) M&L for removing old broken / unserviceable Prelaminated particle board of head board of Bed Hard and S&F new 18mm thick Prelaminated particle board Make: KIT Ply/ century Ply/ Green Ply of approved shade of size 634mm x196mm screwing through MS Angle Iron cleat with 18mmx4mm thick teak wood beading alround the edges of particle board complete. Rest all as specified and shown on drg and directed by Engineer-in-Charge.

M&L for removing old broken / unserviceable Prelaminated particle board of foot board of Bed Hard and S&F new 18mm thick Prelaminated particle board Make: KIT Ply/ century Ply/ Green Ply of approved shade of size 638mm x314mm screwing through MS Angle Iron cleat with 18mmx4mm thick teak wood beading alround the edges of particle board complete. Rest all as specified and shown on drg and directed by Engineer-in-Charge. Ref Drg No.(FD/E6/MAP/08 R)

M&L for removing old broken / unserviceable Ply top of Bed Hard steel and S&F new ply top of 12 mm thick of size 1974mmx850mm BWR Grade as per IS-303 approved specification of Make: KIT Ply/ Century Ply/ Green Ply with fixing in position all as shown on drg with suitable size screws & cup washers complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref Drg No.(FD/E6/MAP/08 R)

M&L for preparation of old steel surface of bed hard by scraping /rusting /denting and applying 2 coats of synthetic enamel paint of colour black in shade of Make: Berger/ Shalimar/ Nerolac/Asian with spary Gun machine complete as directed by Engr-in-charge. Ref Drg No.(FD/E6/MAP/08 R)

Supply & Fix 3mm thick PVC shoes to the legs of Bed Hard Steel complete all as specified and as directed. Ref Drg No.(FD/E6/MAP/08 R)

Charpoy IP Hard top FD/MAP-II/01 Removal of old broken/ rusted /unsv /partly serviceable long rail and Supply and fix new long tube frame duly welded of size 1980mmx25mmx65mm, 16 Gauge complete all as specified as shown on drawing and as directed.

Material and Labour for preparing the short tube frame of size 65mmx25mmx900mm from broken long tube frame obtained from item No.7.01 above duly cutting and welding / fixing to charpoy complete all as specified as shown on drawing and as directed.Ref Drg No.( FD/MAP-II/01)

Removal of old broken/ rusted /unsv MS Tube leg and Supply and fix new MS tube leg of size 32mmx32mmx440mm, 16 Gauge complete all as specified as shown on drawing and as directed.Ref Drg No.( FD/MAP-II/01)

Removal of old broken/ rusted /unsv MS Tube stiffner and Supply and fix new MS tube stiffeners to support ply of size 25mmx25mm, 16 Gauge complete all as specified as shown on drawing and as directed.Ref Drg No.( FD/MAP-II/01)

Removal of unsv Plywood top and Supply & Fix new plywood top of size 1955x875mm x12mm thick BWR Grade Make: KITPLY/ Century Ply/ Green Ply conforming to IS 303 all edges of plywood top be filled with putty to prevent observation of moisture and fixed with suitable nut & bolt complete as specified and directed.Ref Drg No.( FD/MAP-II/01)

CHAIR VERANDAH (FD/MAP-II/06 ) Removal of unsv seat of chair verandah and Supply and fix new PVC seat 4mm thick with grooves 90x10mm 10 No. on seat of size 455x455mm weight not less than 1.85 KG and providing 20mm wide, 420mm long ,4mm thick mild steel flat iron support to PVC seat with necessary welding complete all as specified, as shown on drawing and as directed.

Removal of unsv back of chair verandah and Supply and fix new PVC back 4mm thick with grooves 90x10mm 10 No. on seat of size 455x455mm weight not less than 1.85 KG and providing 20mm wide, 420mm long ,4mm thick mild steel flat iron support to PVC back with necessary welding complete all as specified, as shown on drawing and as directed. Ref Drg No.(FD/MAP-II/06 )

Material and labour for preparing the old steel surfaces and painting with two coats of white synthetic enamel paint of Make: Berger/ Asian/ Nerolac with machine spray complete all as specified, as shown on drawing and as directed. Ref Drg No.(FD/MAP-II/06 )

Remove unsv PVC shoe and providing new PVC shoes approved by Engr in charge . Ref Drg No.(FD/MAP-II/06 )

ALMIRAH LARGE STEEL 1/2H 1/2S ( FD/E6/MAP/18) Removing the following old unserviceable/damaged part and replace/fix the same with new part to match with the existing item as per Drg: 3 way locking assembly system for almirah large steel suitable for almirah all as shown in drawing as approved by Engg-in-charge. Ref Drg No.( FD/E6/MAP/18)

Lock : New Lock should be of 65mm, 6 lever Make Godrej/Harrison/Mortice . Ref Drg No.( FD/E6/MAP/18)

Cleat : New cleat should be of size 40mm x 25mm x1mm thick steel . Ref Drg No.( FD/E6/MAP/18)

CP handle 100mm long : Make SOMA/S.CEE all as shown in drawing as approved by Engg-in-charge. Ref Drg No.( FD/E6/MAP/18)

Legs : New legs must be made of 1mm thick MS sheet of size 485mm long x 100mm highx 100mm wide and to be joined with continuous gas welding as specified and shown in drg complete. Ref Drg No.( FD/E6/MAP/18)

Shelves :New shelves must be made of 1mm thick MS sheet of size 910mmx 490mm for almirah large steel made to shape and size all as specified and shown on drg. Ref Drg No.( FD/E6/MAP/18)

Door Shutter :New shutter must be made of 1mm thick MS sheet of size 1800mmx 455mm for almirah large steel made to shape and size all as specified and shown on drg. Ref Drg No.( FD/E6/MAP/18)

M&L for Preparation of old painted steel surface inner and outer portion of the Almirah Large Steel including shelves by removing all dents filling with putty and spray painting with 2 coat synthetic enamel paint in dual colour of Make: Berger/ Asian/ Shalimar paints of approved shade/Colour by GE over external & internal surfaces of Almirah large steel complete, all as specified and directed by Engr-in-Charge. Ref Drg No.( FD/E6/MAP/18)

CHAIR WRITING FD/E6/MAP/12 M&L for removing of old unsv complete seat and S&F new complete seat all as per measurement specified in Drg made up of 100mm thick PU foam 32 density of make: sleep well / curl on /sring well covered with tapestry cloth of make: Ddecor/ bombay dyeing/ vivid collection of approved shade upholstered on 120mm thick commercial pltwood with PVC lipping all round completely as showen on drg and directed by Engr in Charge.

ditto all as per item sl No 10.01 herein before but for back of chair writing. Ref Drg No. FD/E6/MAP/12

Removing of old unsv P U handle and S&F new handle all as per measurement specified in Drg and approved by Engg In Charge. Ref Drg No. FD/E6/MAP/12

M&L for Preparation of old painted steel surface of the chair writing and spray painting with 2 coats of black synthetic enamel paint of Make: Berger/ Asian/ Shalimar paints after treatment of powder coating on steel surfaces complete, all as specified and directed by Engr-in-Charge. Ref Drg No. FD/E6/MAP/12

Removing of old unsv rubber stopper and S&F new rubber stopper all as per measurement specified in Drg and approved by Engg In Charge. Ref Drg No. FD/E6/MAP/12

Chair Computer FD/E6/MAP/01 M&L for removal of old unsv seat of Chair Computer and S&F new seat of size 510mmx 470mmx 60mm made up of 12 mm thick ply wood BWR Grd Make: Century Ply / Archid / Green Ply, 60 mm thick, 32 density PU cushion of Make: Curl On, Sleep well/ Spring Well covered with tapestry cloth of Make: D'Decor/ vivid collection of approved shade by GE with PVC lipping all round. Rest all as shown on drg and directed by Engineer-in-Charge. Ref Drg No. FD/E6/MAP/01

All as per item No 11.01 here-in-before but back of Chair computer.

M&L for removing old unserv Gas lifting assembly (fitted with bottom of the seat) and S&F new gas lift having chrome free cylinder tube shall be fixed in MS black powder coated outer central coloumn tube 38 mm dia and 2 mm thick.It shall have 100mm strock length and gas pressure of 300n force.Make : Nilkamal or equivalent as approved by Engg in Charge.Ref Drg No. FD/E6/MAP/01

M&L for removing old unserv castor wheel and S&F new PVC twin wheel castor 50 mm (Load Capacity of 80 Kg to 100 Kg)Make : Nilkamal or equivalent as approved by Engg in Charge. Ref Drg No. FD/E6/MAP/01

M & L for removal of old unserv pedestal assembly and supply & fixing of new pedestal assembly of injection moulded in black 30% glass filled nylon, 10.5mm dia forged bright zink plated MS castor pin is of press fitted into each prong for holding the castor (600mm pitch centre dia)as shown on drawing. Make: MBTC/ Genericor or equivalent as approved by Engg in Charge. Ref Drg No. FD/E6/MAP/01

M & L for removal of Handles and supply & fixing of new scrach proof and wheather resistant handle as shown in drawing and approved/ directed by Engg-in-charge. Ref Drg No. FD/E6/MAP/01

CHAIR SCHOOL WITH HAND BOARD (FD/E6/MAP/05) Removal of unsv / broken Top of the chair with iron streep fix and S&F New top of size 585mmx 300mm made up of 18mm thick Prelaminated particle board of Make :KIT Ply/ Green Ply/ Century ply with 4mm with teak wood bidding with semi round shape all round the top of table.

Removal of unsv / broken seat&back of the chair and S&F New one piece PVC seat & back as shown on drg of make: MBTC or equivalent as approved by Engg in Charge. Ref Drg No. (FD/E6/MAP/05)

Removing existing unserviceble rubber shoes and replace with new 25mm dia hard rubber shoe for legs as approved by Engg-in-Charge.Ref Drg No. (FD/E6/MAP/05)

M&L for Preparation of old painted steel surface of the chair school with hand board by removing all dents filling with putty and spray painting with 2 coats of black synthetic enamel paint of Make: Berger/ Asian/ Shalimar paints complete, all as specified and directed by Engr-in-Charge.Ref Drg No. (FD/E6/MAP/05)

VISHWAS ENTERPRISES (BID ID -3106277)

A.K. MARKETING ASSOCIATES (BID ID -3122720)

sandhya enterprises (BID ID -3112993)

Mavee Syndicate (BID ID -3112213)

Global Enterprises (BID ID -3125004)