Modification of Chemical Storage Room and Electrical Panel Room at Kollam Dairy

Amount

Dismantling exisitng Structural Sections with GI roofing at levells by mechanically/ by manually means carefully without damaging adjacent structures including clearing and stacking materials and removing the debris within a distance of 100 m lead.etc complete as per specification and directed by EIC

Dismantling Brick wall along with cement mortar at all levels by manually/ by mechanically means, carefully without damaging adjacent structres including stacking of servicable materials and disposal of unservicable materials within 50m lead from site all as per specifications and directed by EIC.

Dismantling MS Windows along with steel frames at all levels by manually/ by mechanically means, carefully without damaging adjacent structres including stacking of servicable materials and disposal of unservicable materials within 50m lead from site all as per specifications and directed by EIC.

Dismantling Mandana Floor Tiles along with cement mortar at all levels by manually/ by mechanically means, carefully without damaging adjacent structres including stacking of servicable materials and disposal of unservicable materials within 50m lead from site all as per specifications and directed by EIC.

Providing and laying PCC(1:3:6) thick in foundation and plinth using 20mm nominal size graded hard granite stone aggregate including compaction, finishing top surface to level, inclusive of shuttering rate etc; complete all as per specifications.

Providing and laying in position RCC (1:1.5:3) thick for side wall, platform, base foundation etc. using 20mm nominal size aggregate obtained from approved quarry including mechanical mixing, vibrating, compaction, finishing, curing, etc in water level as per site condition; complete all as per specifications. The rate shall include the cost of shuttering/form work.

Providing and constructing Brick masonry with Solid concrete Block of size 40cmx20cmx20cm in CM 1:6 at all levels as per technical specifications and directed by Engineer in charge including cost and conveyance of all materials to site, labour charges, hire and labour for scaffolding etc.complete

Plastering for walls, beams, ceiling etc in CM 1:5 with 9mm thick using M-sand of approved quality including cost of materials, conveyance, charges for labours, hire charges for scaffolding etc. complete as per directed by EIC

Providing Floor finish with vertified floor tiles of approved quality and size nearest and thickness 8 mm or nearest laying in cement mortar 1:6, 12mm thick with a neat cement flushing coat etc. and closing the joints with epoxy joint filler to correct lines and levels including cost and conveyance of all materials to site, labour charges, charges for cutting and finishing to the required level/slope etc including cleaning the surface with acid etc. complete for all floors.

Providing Epoxy Urethane Flooring of required thickness with approved quality including cost and conveyance of all materials to site, labour charges, etc. complete.

Painting with plastic Emulsion paint of approved colour and quality two coats over two coats of wall putty applied over a priming coat of cement paint for Inside & Outside walls including cost and conveyance of all materials to site, labour charges, hire charges for scaffolding , etc. complete.

Providing and fixing precoated Galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces etc. to the correct size and shape wherever required complete as per specification and directed by EIC.

Supplying and fixing anodised Aluminium Window fully glazed, outer frame made out of 100mm x 45mm with threshold plates and shutter section out of 50mm x 45mm (wall thickness 2mm for all sections), hinges of required number and size and all necessary accessories etc complete.

Steel reinforcement using TMT bars for all R.C.C items including decoiling, cutting, hooking, bending, cranking, fabricating to required shape, placing in position and tying the system with soft drawn annealed binding wire of diameter not less than 1.00mm with 2 strands etc complete

Providing and fixing Structural steel sections of channel, angles, square and circular tubes etc. welded/bolted, including cutting, hoisting, fixing in position and two coat synthetic enamal painting over a base coat of primer etc.complete as per direction of EIC and Technical specification.

Providing and fixing SS Double Door (2100mmX2100mm) using outer frame of 100mmX35MM in 4mm thick and shutter frame 50mmx25mm in 1.5mm thick tube with acrylic sheet at required level and 304SS in required including cost of materials, labour charge, conveyance etc. complete all as directed and technical specification.

Supplying and fixing anodised Aluminium Door (1000mm*2100mm) partly panelled with 4.5mm thick ACP sheets(upto 1200mm height, both sides) and partly glazed(above 1200mm upto 2100mm height) single leaf doors, outer frame made out of 100mm x 45mm with threshold plates and shutter section out of 50mm x 45mm with sill section of 100mm x 45mm (wall thickness 2mm for all sections), door stopper, hinges of required number and size and all necessary accessories etc complete.

RAJENDRAN