Major Repair to Girls Primary School Lethpora under S.No. 1588.

Removing of Damaged plywood ceiling i/c staking by Engagement of Skilled labour as directed by EIC complete.

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead : of area 3 sqm and below.

Removing white or colour wash by scrapping and sand papering the surface smooth including necessary repairs scratches etc. complete

Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): imported wood

Providing wood work in frames of false ceiling partitions etc. sawn and fixed in position KD Wood.

Providing / fixing of 10 mm thick plywood ceiling of approved brand and manufacture (fixed in sq Pannels as directed) i/c all necessary fittings, cornice 2.5"x2.5" complete.

Providing and applying wall putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Drawing 3D paintings (like: Fruits, Animals, Plants, Themes etc) as per requirement and approved by the authority and as per directions of the Engineer inchage complete i/c cost of the material involved etc.

Providing and fixing of popular wood locally (locally seasoned) in trusses including fittings and fixtures with all carriages.

Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing ridges or hips of width 45cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2

Providing and fixing of colour coated CGI sheet for Soffits/eaves boarding 0.40mm thick including all necessary fittings and necessary scaffolding complete job.

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) in fine sand

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.

Providing and fixing of MS Sign board 3ftx2ft including lettering as directed by EIC complete Job.