Recontruction of Head Regulator of Kishanpura Distributary

Amount

Dismantling C.C. 1:4:8.

Dismantling Brick work in cement

Dismantling R.C.C.

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.

Excavation of Soil using Hyraulic Excavator and hydraulic Tractor Trolly I/C cutting and loading in Trolly and transporting to the embankment locations with all lifts and leads Disposal/carraige from 0 upto 450m

Compaction including Extra for laying earth/fly ash as per specifications in 20 cm. Layers and dressing but excluding cost of rolling, Extra for watering the earth/fly ash laid in 20 cm layers as per specifications for compaction, Extra for rolling to specifications.

Earthwork for Lipcutting for Irrigation Channel inclusive of all allowances leads and dressing 0 to 1.5 mtr depth

Dressing of bed and prepration of sub grade for lining complete in all respect as per pwd specification.

Dressing of Side Slopes and prepration of sub grade for lining complete in all respect as per pwd specification.

Laying cement water slurry 1:3 with cement @2.25 kg/sqm as on prepared side slopes before laying concrete on side slopes including supply and carriage & Loading Unloading of all material complete in all respects as per PWD specifications

Cement concrete 1:3:6 with stone ballast or shingle mixing by mechanical means using concrete mixer volumetric type

Cement concrete lining 100mm. thick or less laid manually for irrigation channels, using cement concrete M- 20 mixed in an automatic computerized Batching & Mixing Plant and transported to the site in transit mixers with an average lead of 1 Km

Plain/RCC grade M-25 in sub structure complete as per drawing and technical specifications

Furnishing and placing RCC grade M25 as per drawing and technical specification using Batching plant, transit mixer and concrete pump for T-beam and slab including centering and shuttering

Supplying,Fitting and placing HYSD bar reinforcement in sub structure complete as per drawing and technical specifications

Supplying,Fitting and placing HYSD bar reinforcement in Super structure complete as per drawing and technical specifications

Providing and making of expansion joint filled with joint sealing compound as per drawing and technical specifications with coarse sand and 6% bitumen by weight 10mm depth

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)

Centering and shuttering for faces of walls, partitions, retaining walls and the like (vertical or battering including attached pilasters buttresses etc.

Centering and shuttering for faces of walls, partitions, retaining walls and the like (vertical or battering) including attached pilasters, buttresses etc when curved.

Filling stones or spalls into crates and hand packing i/c supply of boulder stones as per PWD specifications( boulder stones 18-40 kg not less than 90% and wt. of boulder

Weaving wire netting for wire crates including binding sides and partitions to make crate of 15 cm x 15 cm or 25 cm x 7.5 cm mesh.

Providing, fitting and fixing mild steel railing complete as per drawing and Technical Specification

Supply of GI Pipe hollow/pipe of any size.

Repairing of Gates by cutting and strenghening charges i/c allignment of gates complete in all respects and to entire satisafaction of engineer incharge

Supply of multipurpose synthetic Hetiv Grease

Supply of multigrade mobile oil.

Comissioning & testing of Gates at site complete in all respects and to entire satisfaction of engineer in charge

Providing Chequered plate 8mm

Removing, Providing & fixing S.S. Flats, Complete in all respects.

Supply of Skin Plates

Supply of spindal for hoist Mechanism i/c threading and machining complete in all respects to entire satisfaction of engineer incharge.

Provinding installation & fixing in position 250mm dia MS-Hoist assembly/ drum hoist machine at site complete in all respects and to entire satisfaction of engineer incharge.

Supply and fixing of Spindle cover (Pipe of appropriate Dia)

Providing & Fixing of Galvinized nut and bolts of all sizes & length required.

Providing & Fixing of Stailness Steel nut and bolt of all sizes & length required.

Fillet welding with High strength steel rods, complete in all respects and to entire satisfaction of engineer incharge. 6mm

Fillet welding with High strength steel rods, complete in all respects and to entire satisfaction of engineer incharge. 8mm

Fillet welding with High strength steel rods, complete in all respects and to entire satisfaction of engineer incharge. 12mm

Provinding of Hollow bulb seal & fixing in position i/c preparation of surface complete in all respects and to entire satisfaction of engineer incharge 100mm wide 44mm dia

Providing anf fixing in position of flat/wedge seal i/c preparation of surface complete in all respects and to entire satisaftion of engineer incharge

Advance Direction sign board 1200x900mm rectangular per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting as per ASTM D 4956 – 09 and as per IRC 67 – 2012. grade sheeting fixed over 4mm thick Aluminium Composite Material (ACM) sheeting having aluminium skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on two square hollow steel section post 60x60x3.2mm conforming to IS 4923 firmly fixed to ground in foundation concrete M-25 of size 0.60x0.60x0.75m for vertical post complete as per clause 801 of MORT&H specifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting & a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67-2012 . Using high intensity Microprismatic grade retro reflective Sheeting Type IV as per ASTM D 4956 09 and as per IRC 67 2012

Proving and fixing 7watt LED 40watt solar panel 12V-40Ah T-yel battery with 7m pole fixed with 1:2:4 concrete foundation of size 1.2x0.6x0.75 complete in all respects and to entire satisfaction of engineer-in-charge

Crane 35-tonnes charges for lifting for dismantling loading/unloading and fitting of gates at site @ 5hrs per gate

Applying priming coat with metallic primer steel/iron work including preparing of surface.

Paiting two coats with synthetic enamel paints on metalic surface to give even shade

Paiting two coats of anti-corrosive bitumastic paint to give even shade with special quality paint.

Supply of IS Angles, JOISTs, Channels, Flats, Plates, Tees, etc of all sizes and thickness

Drilling/Boring hole complete in all respects and to entire satisfaction of engineer incharge. 0-10mm dia

Supply of Graded Filter

SUKHDEV SINGH CONTRACTOR

JASWINDER SINGH CHAHAL GOVT CONTRACTOR