RENOVATION AND MAINTENANCE WORK OF UTTARAKHAND BHAWAN AT LUCKNOW, UTTARPRADESH

Amount

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:4:8 or leaner mix (including equivalent design mix)

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. to 40 mm

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore

Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge: Up to 150 mm diameter

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Cartage of material by mannual labour inculding loading ,unloading & stacking up to 2km

Excavating trenches of required width for pipes, cables, etc including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Supplying and filling in plinth with gola sand under floors, including watering, ramming, consolidating and dressing complete.

Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor:

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size).

Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:5:10 (1 cement : 5 coarse sand (zone-lll) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)

Providing and laying in position ready mixed or site batched design mix cement concrete (M-25) for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge, for the following grades of concrete.: All works upto plinth level

Providing and laying in position ready mixed or site batched design mix cement concrete (M-25) for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge, for the following grades of concrete.: All works above plinth level.

Providing units of reinforced cement concrte 1:1.5:3(1cement :1.5 coarse sand:3graded stone aggregate 20mm.nomnal size) of strength not less than M-150 in lintels and band over door and windows excluding supply of reinforcement and its bending including

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars

Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete

Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts

Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform

Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers

Centering and shuttering including strutting, propping etc. and removal of form for : Edges of slabs and breaks in floors and walls Under 20 cm wide

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.

Providing and laying 60 mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Sal wood

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Toughened glass 12 mm thickness

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5 mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.Frame size 65 x 150 mm

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel utt hinges and necessary S.S screws shall be paid separately) 35 mm thick

Providing and fixing aluminium sliding door bolts, IS] marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete 300x16 mm

Providing and fixing aluminium sliding door bolts, IS] marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete 250x16 mm

Providing and fixing aluminium handles, IS] marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : etc.300x10 mm 250x10 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : etc.300x10 mm 150X10 MM

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyedto required colour or shade, with necessary screws etc. complete : 250x10 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyedto required colour or shade, with necessary screws etc. complete : 150X10 MM

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Single rubber stopper

Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 5.5 mm thick glass panes

Two and half track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. Using R3 series with frame (85 mm & above) x (40 mm & above) & glazed sash (30 mm & above) x (55 mm & above) & fly screen sash (20 mm & above) x (50 mm & above) with zinc alloy (zamak) powder coated handle on every glazed panel along with multi-point locking system. (Height upto 1.8 metre).

Fixed window / ventilator with mullion / transom. Using R1 series with frame (33 mm & above ) x (35 mm & above) & mullion (33 mm & above) x (50 mm & above). (Height upto 0.90 metre)

Providing and fixing stainless steel (SS-304 grade) friction hinges to the side/top hung uPVC windows, of approved quality, with necessary stainless steel screws etc. as per direction of Engineer-in-charge. 250 x 19 x 1.9 mm

Providing and fixing casement handle made of zinc alloyed (white powder coated) for uPVC casement window with necessary screws etc. complete.

Providing and fixing zinc alloyed (white powder coated) touch lock for uPVC sliding window with necessary screws etc. complete.

Providing and fixing steel roller for uPVC sliding window with necessary screws etc. complete.

Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6 mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear float glass 6 mm thick, spacer tube 12 mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineerin- Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.25.2) For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. (i) Coloured tinted float glass 6 mm thick substrate with reflective soft coating on face # 2, + 12 mm Airgap + 6 mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby red Area of slab over 0.50 sqm

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab of colour Black, Cherry/Ruby Red or equivalent

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to 1S:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of size. Size of Tile 600 x 1200 mm

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to 1S:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size Size of Tile 600 x 1200 mm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 20 mm thick cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm

Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in-charge. (The panel shuttering work shall be paid for separately). (Note:- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately).

Providing & fixing of stainless steel signage at front side of the mumty complete in all respects as per direction given by engineer in charge.

Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.

6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand)

12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand)

15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand)

15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete..

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water tinnable priming coat with cement primer

Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm

Finishing walls with water proofing cement paint of required shade New work (Two or more coats applied @ 3.84 kg/10 sqm)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1mx1mx400micron, finished with 12mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement rounding the edge sand making and finishing the outlet complete.

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS : 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm).

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.

Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge :

Providing and laying cement concrete in retaining walls, return walls (any thickness) including attached pilasters, columns, piers, abutmets, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping bed blocks, anchor blocks, plain window sills, fillets etc upto floor five level, excluding the cost of centring, shuttering and finishing 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level.300 mm dia

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -incharge.

Providing & fixing of R.C.C manhole covering tank (600 x 600)

Providing & fixing of foot rest in tank

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter

Constructing masonry Chamber 120x120x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), including necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes

Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated ‘J’ or ‘L’ hooks, bolts & nuts 8 mm dia. G.| plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2 mm thick corrugated (2.5” or 4.2” or 6”) or step-down (2” or 3” or 6” ) as specified

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm)

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Gutter (600 mm over all girth)

Providing & Grouting of dowel tubes / Shear keys / Joints of precast members with M-60 grade cementitious grout (Non Shrink) of approved make by suitable means (Free flowing /pump),curing etc. Complete as per directions of Engineer-in-charge. (The payment shall be made on the basis of actual weight of approved grout injected. Stirrer mixed cementitious grout (non shrink) of approved make in dowel tubes / Shear keys / Joints of precast members.

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars 250 mm dia. R.C.C. pipe 250 mm dia RCC pipes.

Constructing brick masonry circular manhole 1.22 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement :4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : 1.68 m deep with SFRC Cover and frame (heavy duty HD20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) :

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality 19.19.1 L D- 2.5 Rectangular shape 600x450 mm internal dimensions

Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design :With 20x20 mm square bar

Providing & fixing of P.O.P. false ceiling with aluminium channeling complete in all respects including labor as per direction given by engineer in charge.

Providing & fixing Ventura Decorative Plank HSN 3918 for interior work with all labor & material needed in fixing complete in all respects as per direction given by engineer in charge.

Providing & fixing of wall clock complete in all respects as per direction given by engineer in charge.

Providing & fixing of wall painting complete in all respects as per direction given by engineer in charge.

Rebaring by using various diameter 12mm to 25mm. Dia, hilti make chemical (Re-500) max.depth 300 mm. 12MM

Rebaring by using various diameter 12mm to 25mm. Dia, hilti make chemical (Re-500) max.depth 300 mm. 16MM

Rebaring by using various diameter 12mm to 25mm. Dia, hilti make chemical (Re-500) max.depth 300 mm. 20MM

Rebaring by using various diameter 12mm to 25mm. Dia, hilti make chemical (Re-500) max.depth 300 mm. 25MM

Providing & fixing of toughned glass sliding automatic sensor door of 3mx3m complete in all respects with all its accesories as per direction given by engineer in charge.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Coupler(110 mm)

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Bend 87.5 degree 110 mm bend

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Shoe (Plain) 110 mm Shoe

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs,screwed with M.S. screws of required length including

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 15 mm dia. nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 20 mm dia. nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 50 mm nominal outer dia Pipes

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore.

Providing and fixing uplasticised PVC connection pipe with brass unions : 15 mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore (Horizontal)

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked black solid plastic seat and lid

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar tap

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250 mm

Providing and fixing soil, waste and vent pipes :100 mm dia Sand cast iron S&S pipe as per IS: 1729 110 mm dia

Providing and fixing soil, waste and vent pipes :100 mm dia Sand cast iron S&S pipe as per IS: 1729 75 mm diameter :

Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : for 110 mm dia pipe

Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : for 75 mm dia pipe

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore 15mm nominal bore

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Circular shape 450 mm dia

Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.

Providing and fixing double equal plain junction of required degree. 100x100x100mm

Providing and fixing double equal plain junction of required degree. 75x75x75x75 mm

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete 100 mm diameter pipe

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete 75 mm diameter pipe

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked black solid plastic seat and lid

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar tap

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern

Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water)Shrubs Plant

Providing and Displaying Bismarckia Palm 115 to 180 cm ht., well developed 12 and above good color fresh and healthy leaves in 40 cm Cement Pot as per direction of the officer-in-charge.

Providing and stacking of Adansonia digitata (kalp vricksh) of ht 150-165v cm in bag size of 25 cm as per direction of the officer-in-charge.

Providing and stacking of Bottle palm of ht. 270-300 cm bottom girth 40-50 cm well developed in big HDPE bags as per direction of the officer-in-charge

Providing and stacking of Foxtail palm of ht. 240-270 cm bottom girth 35- 40 cm well developed in big size HDPE bags as per direction of the officer-in-charge.

Sunflower Dwarf ( one Set 100 plants)

Vinca Hybrid( one Set 100 plants)

Gaillardia Double( one Set 100 plants)

Salvia( one Set 100 plants)

Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge.

Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment).

Spreading of Sludge Farm Yard Manure or/and good Earth (Spreading of sludge farm yard manure or/ and good earth in required thisludge, farm- yard manure or/and good earth to be paid for separately))

Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge

FOYER AREA CONSOLE COUNTER SIZE - 1800 X 450 X 1200MM providing or supplying a console unit , made in 18mm thick MDF board duly edge bended, unit having a 2 compartment and 4 shutter unit with adjustable shelf. Also console unit having a 3" black wooden legs for support.

LOUNGE AREA TWO SEATER SOFA This modern sofa features a curved design with a sleek metal frame and comfortable upholstery. The sofa is constructed with a sturdy metal frame and upholstered in a durable fabric. The curved design provides ergonomic support and creates a visually appealing aesthetic. The sofa is perfect for waiting rooms, reception areas, or lounge spaces.

CENTRE TABLE MODEL - CUSTOMIZED SIZE - 1200X600X 450(H)MM This coffee table features a classic, timeless design with a rectangular shape and a 8mm thick glass top. The table is constructed from solid wood duly polished, . The glass top adds a touch of elegance and helps to showcase the wood grain. The table also includes a lower shelf for storing books, magazines, or other items. The sturdy wooden frame provides stability and durability.

CORNER TABLE MODEL - CUSTOMIZED SIZE - 450 DIA The side table top is madefrom 18m thick MDF board with 1mm thick sunmica , The round tabletop is supported by four tapered legs made in solid wood, creating a mid-century modern aesthetic. A lower shelf provides additional storage space. The table is finished with a natural wood tone The table requires minimal assembly and features adjustable levelers for stability on uneven floors.

BEDROOMS KING BED SIZE - 1800(W)X1950(L)X1500(H)MM This double bed features a modern, upholstered headboard with a vertical quilting design. The bed is constructed from MDF Board, and finished with a durable laminate in a rich woodgrain color.The bed is perfect for modern bedrooms and provides ample storage space for bedding and other items.

SIDE TABLE SIZE - 450X450X550MM This bedside table features a modern, two-tone design with a warm wood grain finish and a contrasting white drawer. The table is constructed from 18mm thick PLPB board and finished with laminated.The table offers ample storage space with one drawer and an open shelf, allowing for convenient organization of bedside essentials. The drawer is equipped with a sleek, silver handle for a contemporary look.

THREE SEATER SOFA This modern sofa features a curved design with a sleek metal frame and comfortable upholstery. The sofa is constructed with a sturdy metal frame and upholstered in a durable fabric. The curved design provides ergonomic support and creates a visually appealing aesthetic. The sofa is perfect for waiting rooms, reception areas, or lounge spaces.

TWO SEATER SOFA This modern sofa features a curved design with a sleek metal frame and comfortable upholstery. The sofa is constructed with a sturdy metal frame and upholstered in a durable fabric. The curved design provides ergonomic support and creates a visually appealing aesthetic. The sofa is perfect for waiting rooms, reception areas, or lounge spaces.

SINGLE SEATER SOFA This modern sofa features a curved design with a sleek metal frame and comfortable upholstery. The sofa is constructed with a sturdy metal frame and upholstered in a durable fabric. The curved design provides ergonomic support and creates a visually appealing aesthetic. The sofa is perfect for waiting rooms, reception areas, or lounge spaces.

CORNER TABLE SIZE - 450MM DIA Overall Height: 24 inches Leg Height: 18 inches this coffee table features a minimalist design with a round white tabletop and a sturdy wooden base. The table top is made of 25mm thick high gloss MDF board with laminate finish, providing a clean and modern look. The base consists of four tapered wooden legs with a crossbar for added stability. The table is ideal for small spaces and can be used as a side table, accent table, or coffee table.

CENTER TABLE SIZE - 1200X 600 X 450MM This coffee table features a sleek, modern design with 18mm thick BWP Plywood Board on top finish with white glossy laminate top, and a wooden base. is constructed from a solid wood frame and is finished with a rich, warm tone finish. while the open lower shelf provides ample storage space for books, magazines, or other items. The table is perfect for contemporary living rooms and adds a touch of sophistication to any space.

STUDY TABLE SIZE - 1200X600X750MM This study table features a modern, minimalist design with a clean, two-tone color scheme.top made of 25mm thick PLPB board and side panel & modesty panel made in 18mm thick PLPB board duly edge bended.table having a 2 equal drawer with groove opening. The table top is spacious, providing ample room for a laptop, books, and other study essentials. Two drawers offer convenient storage for stationery, documents, or other personal belongings. The table is constructed from durable engineered wood and is supported by a sturdy metal frame. The table is easy to assemble and is ideal for students, home offices, or small spaces.

STUDY CHAIR MODEL - HI STYLE Overall Width: 28 inches Overall Depth: 24 inches Overall Height: 36 inches Seat Height: 18 inches Seat Depth: 20 inches This armchair showcases a classic design with a wooden frame and comfortable upholstery. The curved arms and backrest offer ergonomic support, while the cushioned seat provides comfort for extended sitting. The chair features a solid wood frame, ensuring durability and stability. The upholstery is available in various fabric options to suit different preferences and interior styles. The chair is ideal for living rooms, bedrooms, or waiting areas.

TV UNIT SIZE - 1500X 450X 1800MM (various sizes according to the layout ) This TV unit features a modern, minimalist design with a combination of wooden laminate and white accents.The unit is constructed from 18mm thick PLPB board and finished in a durable laminate. The unit includes a spacious shelf for displaying decorative items or electronic devices, as well as a lower shelf with open compartments for storing media players, gaming consoles, or other items.

LUGGAGE RACK CUM BAR UNIT SIZE - 1800 x 600 x 2100mm This unit features a modern, minimalist design with a focus on functionality and style.complete unit made in prelaminated MDF board with SS patti in luggage rack for storing bags. The unit offers ample storage space with a hanging section for clothes, a shelf for accessories, and drawers for additional items. The unit is constructed from high-quality PLPB board and is finished in a natural wood tone. The integrated lighting adds a touch of elegance and makes it easy to find items within the wardrobe. The unit is perfect for modern bedrooms and provides a stylish and practical storage solution.

WARDROBE SIZE - 900X600X1800MM This wardrobe features a classic design with a dark wood finish. complete storage made in 18mm thick prelaminated MDF board . with SS handle for opening The wardrobe offers ample storage space with three spacious compartments and two drawers. The mirrored door adds a touch of elegance and functionality, allowing for quick outfit checks. The wardrobe is constructed from durable engineered wood and is supported by sturdy legs. It is perfect for bedrooms of all sizes and provides a stylish and practical storage solution.

OFFICE AREA Executive Office Desk With Side Unit. MODLE - DGS P7001 SIZE -2400*2100*750MM Executive office Desk with Side unit made of mdf board with 2/.8 mm thick Pvc Edgebanded Finish . top made of 36mm thick, Gable end 36 mm thk with dual shade, Modesty panel 18mm thkMDF Interior with as per image desgin, exposed edges covered with 2 mm pvc edge banding tape and non exposed edges covered with .8 mm thk pvc edge banding tape. Side Unit top 36mm thk Rest all 18mm thickMDF Board Interior Grade, Fixed Drawer unit 2 drawer + 1 filling unit, Drawer slides telescopic channel with central locking systems s. all exposed edges covered with 2 mm pvc edge banding tape and non exposed edges covered with

HIGH BACK CHAIR MODEL - DAS - 1107 Supplying High Back Overall Size 660W x 660D x 1210H . Seat Plywood Made Of 15mm Hot Pressed Supported and Back made of 25x10 rectunglor pipe with 16 guage . Upholstery Structure Moulded With Prime Quality Leatherite . ( Gas-Lift ) 100mm . Seat & Back Are Firmly Connected To The Base Frame Machanism . Tilt Adjustment Can Be Operated In Seating Position . Machanism Provided Upright Position Locking . Centre Tilts Seat & Back Are Fixed Together Whole Structure Moves Together In One Direction . Chair Max Height 1210 . 490W x 510D Base Seat 75mm Thick With HD Foam , D -40 kg/m3 & 460W x 760H Back in made of 25x10 rectangular pipe and 25 mm thik HD foam pasted on frame .back with head rest made of 8mm solid bar and pasted 25mm thk HD foam on headrest(360W X 190H) 490 Handle In /560 Handle In Arm Rest Fitted To The Seat With Armrest Connecting Brackets . Arm Rest Height From Seat 180mm . Arm Rest PU Moulded fix on 40X10 with 16 guage rectungler pipe) . Height From Seat To Ground 450mm . Seating Height Can Be Adjusted With a Pneumatic Gas Lift . base in chroem and Casters Made Of Moulded Black Nylon Metal Bolt Inserted & Fitted With 5 Nos . Twin Wheel Casters 50mm Dia .

VISITOR CHAIR MODEL - DAS - 1109 Supplying visitor Chair Overall Size 660W x 660D x 1210H . Seat Plywood Made Of 15mm Hot Pressed Supported and Back made of 25x10 rectunglor pipe with 16 guage . Upholstery Structure Moulded With Prime Quality Leatherite . Understructure Base Of Chair Metal Structure Fixed Type. 910 . 490W x 510D Base Seat 75mm Thick With HD Foam , D -40 kg/m3 & 460W x 560H Back in made of 25x10 rectangular pipe and 25 mm thik HD foam pasted on frame . 490 Handle In /560 Handle In Arm Rest Fitted To The Seat With Armrest Connecting Brackets . Arm Rest Height From Seat 180mm . Arm Rest PU Moulded fix on 40X10 with 16 gauge rectangular pipe . Height From Seat To Ground 450mm . chair base frame made of 25mm round pipe with 16 gauge chrome coating.

THREE SEATER SOFA This modern sofa features a curved design with a sleek metal frame and comfortable upholstery. The sofa is constructed with a sturdy metal frame and upholstered in a durable fabric. The curved design provides ergonomic support and creates a visually appealing aesthetic. The sofa is perfect for waiting rooms, reception areas, or lounge spaces.

TWO SEATER SOFA This modern sofa features a curved design with a sleek metal frame and comfortable upholstery. The sofa is constructed with a sturdy metal frame and upholstered in a durable fabric. The curved design provides ergonomic support and creates a visually appealing aesthetic. The sofa is perfect for waiting rooms, reception areas, or lounge spaces.

SINGLE SEATER SOFA This modern sofa features a curved design with a sleek metal frame and comfortable upholstery. The sofa is constructed with a sturdy metal frame and upholstered in a durable fabric. The curved design provides ergonomic support and creates a visually appealing aesthetic. The sofa is perfect for waiting rooms, reception areas, or lounge spaces.

CENTER TABLE SIZE - 1200X 600 X 450MM This coffee table features a sleek, modern design with 18mm thick BWP Plywood Board on top finish with white glossy laminate top, and a wooden base. is constructed from a solid wood frame and is finished with a rich, warm tone finish. while the open lower shelf provides ample storage space for books, magazines, or other items. The table is perfect for contemporary living rooms and adds a touch of sophistication to any space.

CORNER TABLE SIZE - 450MM DIA Overall Height: 24 inches Leg Height: 18 inches this coffee table features a minimalist design with a round white tabletop and a sturdy wooden base. The table top is made of 25mm thick high gloss MDF board with laminate finish, providing a clean and modern look. The base consists of four tapered wooden legs with a crossbar for added stability. The table is ideal for small spaces and can be used as a side table, accent table, or coffee table.

TV UNIT SIZE - 1800 x 2400 x 450mm This TV unit features a modern, modular design with a combination of wall-mounted shelves and a low-lying console. The unit is constructed from 18mm thick PLPB board and finished in a durable laminate. .The wall-mounted shelves offer ample space for displaying books, decorative items, or electronic devices. The open shelves allow for easy access and organization. The low-lying console provides storage space for media players, gaming consoles, or other electronic devices.

DINNING ROOM DINNING TABLE SIZE - 2400X 900 X 750MM This dining set features a large, rectangular table made in solid wood with natural wood finish The table is constructed from solid wood The table top is thick and sturdy, 1.5 to 2 inches thick. The table having solid wood tapered legs duly polished.

WOODEN CHAIR wooden chairs feature a solid wooden frame with duly polished with upholstered seats and backs,

DINNING TABLE SIZE - 3000X 1200 X 750MM This dining set features a large, rectangular table made of solid wood with dark wood finish The table top, constructed from solid wood with a veneer finish, is 1.5 to 2 inches thick and features a glass insert in the center. The table's sturdy base, 2 to 3 inches thick legs, ensures stability.

WOODEN CHAIR The chairs, crafted from solid wood or engineered wood, are upholstered in fabric or leather with high-density foam cushioning for comfort. The set offers a stylish and functional dining solution for any home, combining elegance with durability.

CROCKERY UNIT SIZE - 1800 X 600 X 1200MM This cabinet features a modern, minimalist design with a dark wood finish. the cabinet made of 18mm thick PLPB board duly edge bended. The unit offers ample storage space with shutter, allowing for organized storage & belongings. and is supported by sturdy 3" legs.

WASHROOMS WASHROOM VANITY SIZE - 900 X 600 X 750MM This bathroom vanity features a modern, minimalist design . The base of the vanity is made of a 18mm thick BWP plywood board, and finished with natural laminate shade. The vanity features two drawers for ample storage of toiletries and other bathroom essentials. The drawers are equipped with sleek, recessed handles for a clean and contemporary look.

CONFERENCE TABLE SIZE - 4200(W)X1200(D)X750(H) Table top 36mm thick MDF Board with 2/.8mm thick PVC edge banding tape Gable End made of 100mm thick box, Modesty panel 18mm thick. All exposed edges covered with 2 mm pvc edge banding tape and non exposed edges covered with .8mm thk pvc edge banding tape. This table will deliver in knockdown condition.Table is designed considering viewing angle of each user and comforatable space to user.

HIGH BACK CHAIR MODLE - DBS - 1044 Providing High Back Overall Size 690W x 690D x 1155H . Seat & Back (L) Plywood Made Of 12mm Thick Hot Pressed . Upholstery Ply Structure Moulded With PU Foam High Quality Double Cusioned Leatherite . PHA ( Gas-Lift ) 105mm (TDC 171mm & BDC 66) . Seat & Back Are Firmly Connected To The Base Frame Machanism . Machanism Provided Upright Position Locking & Tilt Machanism Structure Moves Together In Equal Ratio Movement . 530W x 530D Base Seat 120mm Thick (L) Ply Structure Moulded With PU Foam D - 45kg/m3 , H-20 Leatherite & 540W x 610H Back Seat Base 120mm Thick (L) Ply Structure Moulded With PU Foam Leatherite . Handle In 490 & 640 Handle Out Arm Rest Fixed Type PP Structure Base Plate Pvc Type Moulded With PU Foam Leatherite . Height From Seat To Ground 495mm . Understructure Made Of Steel Inserted Chrome Plated SS Finished With 3 Piece Bellow. Casters Made Of Moulded Black Nylon Metal Bolt Inserted & Fitted With 5 Nos . Twin Wheel Casters 50mm Dia . Pedestral Pitch Centre Dia 690mm With Casters & Without Casters 640.

MEDIUM BACK CHAIR MODEL - DBS - 1045 Providing High Back Overall Size 690W x 690D x 1050H . Seat & Back (L) Plywood Made Of 12mm Thick Hot Pressed . Upholstery Ply Structure Moulded With PU Foam High Quality Double Cusioned Leatherite . PHA ( Gas-Lift ) 105mm (TDC 171mm & BDC 66) . Seat & Back Are Firmly Connected To The Base Frame Machanism . Machanism Provided Upright Position Locking & Tilt Machanism Structure Moves Together In Equal Ratio Movement . 530W x 530D Base Seat 120mm Thick (L) Ply Structure Moulded With PU Foam D - 45kg/m3 , H-20 Leatherite & 540W x 610H Back Seat Base 120mm Thick (L) Ply Structure Moulded With PU Foam Leatherite . Handle In 490 & 640 Handle Out Arm Rest Fixed Type PP Structure Base Plate Pvc Type Moulded With PU Foam Leatherite . Height From Seat To Ground 495mm . Understructure Made Of Steel Inserted Chrome Plated SS Finished With 3 Piece Bellow. Casters Made Of Moulded Black Nylon Metal Bolt Inserted & Fitted With 5 Nos . Twin Wheel Casters 50mm Dia . Pedestral Pitch Centre Dia 690mm With Casters & Without Casters 640.

THREE SEATER SOFA This modern sofa features a curved design with a sleek metal frame and comfortable upholstery. The sofa is constructed with a sturdy metal frame and upholstered in a durable fabric. The curved design provides ergonomic support and creates a visually appealing aesthetic. The sofa is perfect for waiting rooms, reception areas, or lounge spaces.

SINGLE SEATER SOFA This modern sofa features a curved design with a sleek metal frame and comfortable upholstery. The sofa is constructed with a sturdy metal frame and upholstered in a durable fabric. The curved design provides ergonomic support and creates a visually appealing aesthetic. The sofa is perfect for waiting rooms, reception areas, or lounge spaces.

CORNER TABLE SIZE - 450MM DIA Overall Height: 24 inches Leg Height: 18 inches this coffee table features a minimalist design with a round white tabletop and a sturdy wooden base. The table top is made of 25mm thick high gloss MDF board with laminate finish, providing a clean and modern look. The base consists of four tapered wooden legs with a crossbar for added stability. The table is ideal for small spaces and can be used as a side table, accent table, or coffee table.

TWO SEATER SOFA This modern sofa features a curved design with a sleek metal frame and comfortable upholstery. The sofa is constructed with a sturdy metal frame and upholstered in a durable fabric. The curved design provides ergonomic support and creates a visually appealing aesthetic. The sofa is perfect for waiting rooms, reception areas, or lounge spaces.

CENTRE TABLE MODEL - CUSTOMIZED SIZE - 1200 X 600 X 450(H)MM This coffee table features a classic, timeless design with a rectangular shape and a 8mm thick glass top. The table is constructed from solid wood duly polished, . The glass top adds a touch of elegance and helps to showcase the wood grain. The table also includes a lower shelf for storing books, magazines, or other items. The sturdy wooden frame provides stability and durability.

CORNER TABLE MODEL - CUSTOMIZED SIZE - 450 DIA The side table top is madefrom 18m thick MDF board with 1mm thick sunmica , The round tabletop is supported by four tapered legs made in solid wood, creating a mid-century modern aesthetic. A lower shelf provides additional storage space. The table is finished with a natural wood tone The table requires minimal assembly and features adjustable levelers for stability on uneven floors.

LOBBY AREA TWO SEATER SOFA This modern sofa features a curved design with a sleek metal frame and comfortable upholstery. The sofa is constructed with a sturdy metal frame and upholstered in a durable fabric. The curved design provides ergonomic support and creates a visually appealing aesthetic. The sofa is perfect for waiting rooms, reception areas, or lounge spaces.

SINGLE SEATER SOFA This modern sofa features a curved design with a sleek metal frame and comfortable upholstery. The sofa is constructed with a sturdy metal frame and upholstered in a durable fabric. The curved design provides ergonomic support and creates a visually appealing aesthetic. The sofa is perfect for waiting rooms, reception areas, or lounge spaces.

CENTRE TABLE MODEL - CUSTOMIZED SIZE - 1200 X 600 X 450(H)MM This coffee table features a classic, timeless design with a rectangular shape and a 8mm thick glass top. The table is constructed from solid wood duly polished, . The glass top adds a touch of elegance and helps to showcase the wood grain. The table also includes a lower shelf for storing books, magazines, or other items. The sturdy wooden frame provides stability and durability.

CORNER TABLE MODEL - CUSTOMIZED SIZE - 450 DIA The side table top is madefrom 18m thick MDF board with 1mm thick sunmica , The round tabletop is supported by four tapered legs made in solid wood, creating a mid-century modern aesthetic. A lower shelf provides additional storage space. The table is finished with a natural wood tone The table requires minimal assembly and features adjustable levelers for stability on uneven floors.

BEDROOMS KING BED SIZE - 1800(W)X1950(L)X1500(H)MM This double bed features a modern, upholstered headboard with a vertical quilting design. The bed is constructed from MDF Board, and finished with a durable laminate in a rich woodgrain color. The bed includes a storage base for easy access to the storage compartment. The bed is perfect for modern bedrooms and provides ample storage space for bedding and other items.

SIDE TABLE SIZE - 450X450X550MM This bedside table features a modern, two-tone design with a warm wood grain finish and a contrasting white drawer. The table is constructed from 18mm thick PLPB board and finished with laminated.The table offers ample storage space with one drawer and an open shelf, allowing for convenient organization of bedside essentials. The drawer is equipped with a sleek, silver handle for a contemporary look.

THREE SEATER SOFA This modern sofa features a curved design with a sleek metal frame and comfortable upholstery. The sofa is constructed with a sturdy metal frame and upholstered in a durable fabric. The curved design provides ergonomic support and creates a visually appealing aesthetic. The sofa is perfect for waiting rooms, reception areas, or lounge spaces.

TWO SEATER SOFA This modern sofa features a curved design with a sleek metal frame and comfortable upholstery. The sofa is constructed with a sturdy metal frame and upholstered in a durable fabric. The curved design provides ergonomic support and creates a visually appealing aesthetic. The sofa is perfect for waiting rooms, reception areas, or lounge spaces.

SINGLE SEATER SOFA This contemporary sofa features a sleek, minimalist design with clean lines and a low profile. The sofa is upholstered in a luxurious fabric and features button-tufted detailing on the back and seat cushions. The frame is constructed from solid wood and is supported by slender, tapered legs. The sofa offers comfortable seating with foam-filled cushions and is suitable for modern living spaces.

CORNER TABLE SIZE - 450MM DIA Overall Height: 24 inches Leg Height: 18 inches this coffee table features a minimalist design with a round white tabletop and a sturdy wooden base. The table top is made of 25mm thick high gloss MDF board with laminate finish, providing a clean and modern look. The base consists of four tapered wooden legs with a crossbar for added stability. The table is ideal for small spaces and can be used as a side table, accent table, or coffee table.

CENTER TABLE SIZE - 1200X 600 X 450MM This coffee table features a sleek, modern design with 18mm thick BWP Plywood Board on top finish with white glossy laminate top, and a wooden base. is constructed from a solid wood frame and is finished with a rich, warm tone finish. while the open lower shelf provides ample storage space for books, magazines, or other items. The table is perfect for contemporary living rooms and adds a touch of sophistication to any space.

STUDY TABLE SIZE - 1200X600X750MM This study table features a modern, minimalist design with a clean, two-tone color scheme.top made of 25mm thick PLPB board and side panel & modesty panel made in 18mm thick PLPB board duly edge bended.table having a 2 equal drawer with groove opening. The table top is spacious, providing ample room for a laptop, books, and other study essentials. Two drawers offer convenient storage for stationery, documents, or other personal belongings. The table is constructed from durable engineered wood and is supported by a sturdy metal frame. The table is easy to assemble and is ideal for students, home offices, or small spaces.

STUDY CHAIR MODEL - HI STYLE Overall Width: 28 inches Overall Depth: 24 inches Overall Height: 36 inches Seat Height: 18 inches Seat Depth: 20 inches This armchair showcases a classic design with a wooden frame and comfortable upholstery. The curved arms and backrest offer ergonomic support, while the cushioned seat provides comfort for extended sitting. The chair features a solid wood frame, ensuring durability and stability. The upholstery is available in various fabric options to suit different preferences and interior styles. The chair is ideal for living rooms, bedrooms, or waiting areas.

TV UNIT SIZE - 1800X 450X 1500MM (various sizes according to the layout ) This TV unit features a modern, minimalist design with a combination of wooden laminate and white accents.The unit is constructed from 18mm thick PLPB board and finished in a durable laminate. The unit includes a spacious shelf for displaying decorative items or electronic devices, as well as a lower shelf with open compartments for storing media players, gaming consoles, or other items.

LUGGAGE RACK CUM BAR UNIT SIZE - 1800 x 600 x 2100mm This unit features a modern, minimalist design with a focus on functionality and style.complete unit made in prelaminated MDF board with SS patti in luggage rack for storing bags. The unit offers ample storage space with a hanging section for clothes, a shelf for accessories, and drawers for additional items. The unit is constructed from high-quality PLPB board and is finished in a natural wood tone. The integrated lighting adds a touch of elegance and makes it easy to find items within the wardrobe. The unit is perfect for modern bedrooms and provides a stylish and practical storage solution.

WARDROBE Size 900X600X1800MM This wardrobe features a classic design with a dark wood finish. complete storage made in 18mm thick prelaminated MDF board . with SS handle for opening The wardrobe offers ample storage space with three spacious compartments and two drawers. The mirrored door adds a touch of elegance and functionality, allowing for quick outfit checks. The wardrobe is constructed from durable engineered wood and is supported by sturdy legs. It is perfect for bedrooms of all sizes and provides a stylish and practical storage solution.

TWO SEATER SOFA This modern sofa features a curved design with a sleek metal frame and comfortable upholstery. The sofa is constructed with a sturdy metal frame and upholstered in a durable fabric. The curved design provides ergonomic support and creates a visually appealing aesthetic. The sofa is perfect for waiting rooms, reception areas, or lounge spaces.

CENTER TABLE SIZE - 1200X 600 X 450MM This coffee table features a sleek, modern design with 18mm thick BWP Plywood Board on top finish with white glossy laminate top, and a wooden base. is constructed from a solid wood frame and is finished with a rich, warm tone finish. while the open lower shelf provides ample storage space for books, magazines, or other items. The table is perfect for contemporary living rooms and adds a touch of sophistication to any space.

CORNER TABLE SIZE - 450MM DIA Overall Height: 24 inches Leg Height: 18 inches this coffee table features a minimalist design with a round white tabletop and a sturdy wooden base. The table top is made of 25mm thick high gloss MDF board with laminate finish, providing a clean and modern look. The base consists of four tapered wooden legs with a crossbar for added stability. The table is ideal for small spaces and can be used as a side table, accent table, or coffee table.

TV UNIT SIZE - 1800 x 2400 x 450mm This TV unit features a modern, modular design with a combination of wall-mounted shelves and a low-lying console. The unit is constructed from 18mm thick PLPB board and finished in a durable laminate. .The wall-mounted shelves offer ample space for displaying books, decorative items, or electronic devices. The open shelves allow for easy access and organization. The low-lying console provides storage space for media players, gaming consoles, or other electronic devices.

SINGLE BED Model- CUSTOMIZED SIZE - 1000(W)X1950(L)X1200(H)MM This single bed features is constructed from durable PLPB with sunmica finish for a premium look. The frame thickness typically ranges from 15mm to 25mm, ensuring stability and durability.

WOODEN ALMIRAH SIZE - 1200X 600X 1800MM This wardrobe is constructed from 18mm thick PLPB board and features a durable laminate finish in a woodgrain color. The wardrobe includes two shelves for folded clothes and a hanging rod for hanging clothes, providing ample storage space. The hinged doors with a lockable handle ensure security and convenience. The wardrobe requires assembly but offers a sturdy and durable construction. Its modern design and ample storage space make it a perfect addition to any bedroom.

WASHROOM VANITY SIZE - 900 X 600 X 750MM This bathroom vanity features a modern, minimalist design . The base of the vanity is made of a 18mm thick BWP plywood board, and finished with natural laminate shade. The vanity features two drawers for ample storage of toiletries and other bathroom essentials. The drawers are equipped with sleek, recessed handles for a clean and contemporary look.

TWO SEATER SOFA This modern sofa features a curved design with a sleek metal frame and comfortable upholstery. The sofa is constructed with a sturdy metal frame and upholstered in a durable fabric. The curved design provides ergonomic support and creates a visually appealing aesthetic. The sofa is perfect for waiting rooms, reception areas, or lounge spaces.

CENTRE TABLE MODEL - CUSTOMIZED SIZE - 1200 X 600 X 450(H)MM This coffee table features a classic, timeless design with a rectangular shape and a 8mm thick glass top. The table is constructed from solid wood duly polished, . The glass top adds a touch of elegance and helps to showcase the wood grain. The table also includes a lower shelf for storing books, magazines, or other items. The sturdy wooden frame provides stability and durability.

CORNER TABLE MODEL - CUSTOMIZED SIZE - 450 DIA The side table top is madefrom 18m thick MDF board with 1mm thick sunmica , The round tabletop is supported by four tapered legs made in solid wood, creating a mid-century modern aesthetic. A lower shelf provides additional storage space. The table is finished with a natural wood tone The table requires minimal assembly and features adjustable levelers for stability on uneven floors.

TV UNIT SIZE - 1800X 450X 1500MM (various sizes according to the layout ) This TV unit features a modern, minimalist design with a combination of wooden laminate and white accents.The unit is constructed from 18mm thick PLPB board and finished in a durable laminate. The unit includes a spacious shelf for displaying decorative items or electronic devices, as well as a lower shelf with open compartments for storing media players, gaming consoles, or other items.

KING BED SIZE - 1800(W)X1950(L)X1500(H)MM This double bed features a modern, upholstered headboard with a vertical quilting design. The bed is constructed from MDF Board, and finished with a durable laminate in a rich woodgrain color. The bed includes a storage base for easy access to the storage compartment. The bed is perfect for modern bedrooms and provides ample storage space for bedding and other items.

SIDE TABLE SIZE - 450X450X550MM This bedside table features a modern, two-tone design with a warm wood grain finish and a contrasting white drawer. The table is constructed from 18mm thick PLPB board and finished with laminated.The table offers ample storage space with one drawer and an open shelf, allowing for convenient organization of bedside essentials. The drawer is equipped with a sleek, silver handle for a contemporary look.

TWO SEATER SOFA This modern sofa features a curved design with a sleek metal frame and comfortable upholstery. The sofa is constructed with a sturdy metal frame and upholstered in a durable fabric. The curved design provides ergonomic support and creates a visually appealing aesthetic. The sofa is perfect for waiting rooms, reception areas, or lounge spaces.

SINGLE SEATER SOFA This modern sofa features a curved design with a sleek metal frame and comfortable upholstery. The sofa is constructed with a sturdy metal frame and upholstered in a durable fabric. The curved design provides ergonomic support and creates a visually appealing aesthetic. The sofa is perfect for waiting rooms, reception areas, or lounge spaces.

CORNER TABLE SIZE - 450MM DIA Overall Height: 24 inches Leg Height: 18 inches this coffee table features a minimalist design with a round white tabletop and a sturdy wooden base. The table top is made of 25mm thick high gloss MDF board with laminate finish, providing a clean and modern look. The base consists of four tapered wooden legs with a crossbar for added stability. The table is ideal for small spaces and can be used as a side table, accent table, or coffee table.

STUDY TABLE SIZE - 1200X600X750MM This study table features a modern, minimalist design with a clean, two-tone color scheme.top made of 25mm thick PLPB board and side panel & modesty panel made in 18mm thick PLPB board duly edge bended.table having a 2 equal drawer with groove opening. The table top is spacious, providing ample room for a laptop, books, and other study essentials. Two drawers offer convenient storage for stationery, documents, or other personal belongings. The table is constructed from durable engineered wood and is supported by a sturdy metal frame. The table is easy to assemble and is ideal for students, home offices, or small spaces.

STUDY CHAIR MODEL - HI STYLE Overall Width: 28 inches Overall Depth: 24 inches Overall Height: 36 inches Seat Height: 18 inches Seat Depth: 20 inches This armchair showcases a classic design with a wooden frame and comfortable upholstery. The curved arms and backrest offer ergonomic support, while the cushioned seat provides comfort for extended sitting. The chair features a solid wood frame, ensuring durability and stability. The upholstery is available in various fabric options to suit different preferences and interior styles. The chair is ideal for living rooms, bedrooms, or waiting areas.

TV UNIT SIZE - 1800X 450X 1500MM (various sizes according to the layout ) This TV unit features a modern, minimalist design with a combination of wooden laminate and white accents.The unit is constructed from 18mm thick PLPB board and finished in a durable laminate. The unit includes a spacious shelf for displaying decorative items or electronic devices, as well as a lower shelf with open compartments for storing media players, gaming consoles, or other items.

LUGGAGE RACK CUM BAR UNIT SIZE - 1800 x 600 x 2100mm This unit features a modern, minimalist design with a focus on functionality and style.complete unit made in prelaminated MDF board with SS patti in luggage rack for storing bags. The unit offers ample storage space with a hanging section for clothes, a shelf for accessories, and drawers for additional items. The unit is constructed from high-quality PLPB board and is finished in a natural wood tone. The integrated lighting adds a touch of elegance and makes it easy to find items within the wardrobe. The unit is perfect for modern bedrooms and provides a stylish and practical storage solution.

WARDROBE Size 900X600X1800MM This wardrobe features a classic design with a dark wood finish. complete storage made in 18mm thick prelaminated MDF board . with SS handle for opening The wardrobe offers ample storage space with three spacious compartments and two drawers. The mirrored door adds a touch of elegance and functionality, allowing for quick outfit checks. The wardrobe is constructed from durable engineered wood and is supported by sturdy legs. It is perfect for bedrooms of all sizes and provides a stylish and practical storage solution.

Executive Office Desk With Side Unit. MODLE - DGS P7001 SIZE -2400*2100*750MM Executive office Desk with Side unit made of mdf board with 2/.8 mm thick Pvc Edgebanded Finish . top made of 36mm thick, Gable end 36 mm thk with dual shade, Modesty panel 18mm thkMDF Interior with as per image desgin, exposed edges covered with 2 mm pvc edge banding tape and non exposed edges covered with .8 mm thk pvc edge banding tape. Side Unit top 36mm thk Rest all 18mm thickMDF Board Interior Grade, Fixed Drawer unit 2 drawer + 1 filling unit, Drawer slides telescopic channel with central locking systems s. all exposed edges covered with 2 mm pvc edge banding tape and non exposed edges covered with

HIGH BACK CHAIR MODEL - DAS - 1107 Supplying High Back Overall Size 660W x 660D x 1210H . Seat Plywood Made Of 15mm Hot Pressed Supported and Back made of 25x10 rectunglor pipe with 16 guage . Upholstery Structure Moulded With Prime Quality Leatherite . ( Gas-Lift ) 100mm . Seat & Back Are Firmly Connected To The Base Frame Machanism . Tilt Adjustment Can Be Operated In Seating Position . Machanism Provided Upright Position Locking . Centre Tilts Seat & Back Are Fixed Together Whole Structure Moves Together In One Direction . Chair Max Height 1210 . 490W x 510D Base Seat 75mm Thick With HD Foam , D -40 kg/m3 & 460W x 760H Back in made of 25x10 rectangular pipe and 25 mm thik HD foam pasted on frame .back with head rest made of 8mm solid bar and pasted 25mm thk HD foam on headrest(360W X 190H) 490 Handle In /560 Handle In Arm Rest Fitted To The Seat With Armrest Connecting Brackets . Arm Rest Height From Seat 180mm . Arm Rest PU Moulded fix on 40X10 with 16 guage rectungler pipe) . Height From Seat To Ground 450mm . Seating Height Can Be Adjusted With a Pneumatic Gas Lift . base in chroem and Casters Made Of Moulded Black Nylon Metal Bolt Inserted & Fitted With 5 Nos . Twin Wheel Casters 50mm Dia .

VISITOR CHAIR MODEL - DAS - 1109 Supplying visitor Chair Overall Size 660W x 660D x 1210H . Seat Plywood Made Of 15mm Hot Pressed Supported and Back made of 25x10 rectunglor pipe with 16 guage . Upholstery Structure Moulded With Prime Quality Leatherite . Understructure Base Of Chair Metal Structure Fixed Type. 910 . 490W x 510D Base Seat 75mm Thick With HD Foam , D -40 kg/m3 & 460W x 560H Back in made of 25x10 rectangular pipe and 25 mm thik HD foam pasted on frame . 490 Handle In /560 Handle In Arm Rest Fitted To The Seat With Armrest Connecting Brackets . Arm Rest Height From Seat 180mm . Arm Rest PU Moulded fix on 40X10 with 16 gauge rectangular pipe . Height From Seat To Ground 450mm . chair base frame made of 25mm round pipe with 16 gauge chrome coating.

TWO SEATER SOFA This modern sofa features a curved design with a sleek metal frame and comfortable upholstery. The sofa is constructed with a sturdy metal frame and upholstered in a durable fabric. The curved design provides ergonomic support and creates a visually appealing aesthetic. The sofa is perfect for waiting rooms, reception areas, or lounge spaces.

CORNER TABLE SIZE - 450MM DIA Overall Height: 24 inches Leg Height: 18 inches this coffee table features a minimalist design with a round white tabletop and a sturdy wooden base. The table top is made of 25mm thick high gloss MDF board with laminate finish, providing a clean and modern look. The base consists of four tapered wooden legs with a crossbar for added stability. The table is ideal for small spaces and can be used as a side table, accent table, or coffee table.

SINGLE SEATER SOFA This modern sofa features a curved design with a sleek metal frame and comfortable upholstery. The sofa is constructed with a sturdy metal frame and upholstered in a durable fabric. The curved design provides ergonomic support and creates a visually appealing aesthetic. The sofa is perfect for waiting rooms, reception areas, or lounge spaces.

TV UNIT SIZE - 1800X 450X 1500MM (various sizes according to the layout ) This TV unit features a modern, minimalist design with a combination of wooden laminate and white accents.The unit is constructed from 18mm thick PLPB board and finished in a durable laminate. The unit includes a spacious shelf for displaying decorative items or electronic devices, as well as a lower shelf with open compartments for storing media players, gaming consoles, or other items.

SINGLE BED Model- CUSTOMIZED SIZE - 1000(W)X1950(L)X1200(H)MM This single bed features is constructed from durable PLPB with a veneer finish for a premium look. The frame thickness typically ranges from 15mm to 25mm, ensuring stability and durability. The bed offers under-bed storage for convenient storage of bedding and other items.

SIDE TABLE SIZE - 450X450X550MM the bed side table made in 18mm thick PLPB board with duly edge bended. The unit having a one drawer with one open shelf for.

WASHROOM VANITY SIZE - 900 X 600 X 750MM This bathroom vanity features a modern, minimalist design . The base of the vanity is made of a 18mm thick BWP ply board, and finished with natural laminate shade. The vanity features two drawers for ample storage of toiletries and other bathroom essentials. The drawers are equipped with sleek, recessed handles for a clean and contemporary look.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. Group C

Wiring for twin control light point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.

Wiring for light/power plug with 2x4 sq.mm FR PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.

Wiring fir curcuit/ submain wiring alongwith earth wire the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Wiring fir curcuit/ submain wiring alongwith earth wire the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 4 X 6 sq. mm + 2 X 6 sq. mm earth wire

Wiring fir curcuit/ submain wiring alongwith earth wire the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 2 Pair

Supplying and fixing of following sizes of PVC conduit along with accessories in surface / recess including painting in case of surface conduit, or cuttting the wall and making good the same in case of recessed conduit as required. 25 mm

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required. 75 mm X 75 mm X 60 mm deep

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 amps switch

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 amp socket outlet

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Telephone socket outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

Supplying and fixing 3 pin, 5 amp. ceilling rose on the existing junction box/ wooden block including connection etc. as required

Supplying and flxing brass batten/angle holder including connection etc. as required.

Installation, testing and commissioning of pre-wired, fluorescent fitting/ compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling / wall, including connection with 1.5 sq.mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq, mm FR PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.

Installation of exhaust fan upto 450 mm sweep in the existingopening, including making the hole to suit the size of the above fan, making good the damage, connection, testing, commissioning etc. as required.

Extra for fixing louvers/shutters complete with frame for a exhaust fan of all sizes.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way (4 + 24), Double door

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissoning etc. as required. 63 amps

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc.with charcoal/ coke and salt as required..

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Supply of AC 230/250 volts, 50 HZ energy efficient ceiling fan with standard down rod, blades, 3 nos. caps Model-ES 50 (1200 mm Sweep) etc. complete in all aspects as per direction of Engineer in Charge 1200 mm sweep

Supply of AC 230/250 volts, 50 HZ exhaust fans including providing nuts, bolts, mounting frame and other accessories etc. complete . Model- Ventil Air - DS (Make : Havells) 300 mm sweep 900 rpm ,complete in all aspects as per direction of Engineer in Charge. 300 mm sweep 900 rpm

SUPPLY OF LED Glass Bulb B22, 15 W ,6000k /4000k/3000K ,230/250 Volt,50 HZ ETC, complete in all aspects as per direction of Engineer in Charge.

Supply and fixing of LED Tube light 1200mm 20W 865 T8 IP20 ,Lumen Output-1600 , 3000, 4000, 6500K ceiling mounted LED batten (E-LITE LED TRIYCA) , extruded aluminium heat sink provided for efficient heat deissipation 7& integrated electronic driver. ( 1x20 W LED Double 6500K) complet in all aspects as per direction of Engineer in charge.

Supplying & Installation ,Testing and commissioning of Passenger Lift 8 person capacity

Providing & fixing of 2 ton AC with all its accessories complete in all respects including all labor & material as per direction given by engineer in charge

Providing & fixing of 42" LCD TV with all its accessories complete in all respects including all labor & material as per direction given by engineer in charge

CCTV SYSTEM

Supply, Installation, Testing and Commissioning of ongrid Solar Photovoltaic Power Plant conforming to MNRE specifications as amended, consisting of Mono/Poly Crystalline silicon solar cells, net metering facility, necessary protections, earthing, mounted on Aluminium/GI structure of suitable strength with following components complete as required:- a) Solar Photovoltaic Module of capacity 330 Wp or above, manufactured in India, conforming to IS 14286/IEC 61215, IS/IEC 61730-Part-1, IS/IEC 61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 16.5%. PV modules used in solar power plants/ systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. b) Power Conditioning Unit (PCU) of 350-800 V DC Input voltage range and 400 V AC, three phase, 4 wire, 50Hz +/- 2.5 Hz, output voltage suitable to generate AC Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 degree C. The PCU shall adjust the voltage and frequency level to suit the Grid Voltage Frequency. c) Data Monitoring System complete with accessories. d) Fixing of Array junction box & Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required. e) Lightning and surge voltage protection. f) Connections & Interconnections by supplying & fixing required size XLPE insulated copper conductor 1.1 kV grade armoured power and control cables between solar modules, main power cable to grid supply PCU unit along with supplying & fixing of necessary channel/conduit lugs and other accessories etc. as required.

Yogesh Tewari Contractor (BID ID -376241)