Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical HAZRAT SAHIB ROAD MOHALLA ZIARAT RAMPUR U P PIN 244901 | RAMPUR | RAMPUR | UTTAR PRADESH | 244901 | Accepted-Technical As per the recommendation of TEC Board and concurrence of finance wing the firm fulfills all parameters of NIT hence recommended to Qualify for the next stage |
| 2 | Accepted-Technical | Accepted-Technical As per the recommendation of TEC Board and concurrence of finance wing the firm fulfills all parameters of NIT hence recommended to Qualify for the next stage |
| 3 | Accepted-Technical JUNIOR A 3 CIVIL LINES MAKKA MILL RAMPUR UP PIN 240901 | 240901 | Accepted-Technical As per the recommendation of TEC Board and concurrence of finance wing the firm fulfills all parameters of NIT hence recommended to Qualify for the next stage |
Tender Value
Refer Docs
EMD Value
₹11,967
Closing Date
24 Aug 2026, 9:30 amClosed
Assistant Commandant (Engineer)
O/o THE DIG, GROUP CENTRE CRPF, RAMPUR (U.P) PIN-244901
Internal and External Painting and Other Works of Hospital Building
2026_CRPF_922483_1
B.V(CH Rampur)/2026-27-Minor Works(NIT-10)
Open Tender
Civil Works
Item Rate
25 days
CH Rampur
As per the Tender Docs
16 documents required · 16 mandatory
₹0
₹11,967
7 Sept 2026
18 Aug 2026
25 Aug 2026
18 Aug 2026
24 Aug 2026
18 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | 12 mm cement plaster of mix1:4 (1 cement: 4 fine sand) | 85.31 | sqm | - | - |
| 2 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) | 791.4 | sqm | - | - |
| 3 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm | 845.25 | sqm | - | - |
| 4 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture | 25.2 | sqm | - | - |
| 5 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete | 845.25 | sqm | - | - |
| 6 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge With cement mortar 1:4 (1 cement : 4 fine sand) | 38.14 | sqm | - | - |
| 7 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | 85.31 | sqm | - | - |
| 8 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | 113.43 | kg | - | - |
| 9 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | 79.32 | kg | - | - |
| 10 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides | 4.12 | sqm | - | - |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.89 MB
BOQ_969380.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .