Construction of Mukya Mantri Lok Bhawan at Chauntra in Tehsil Joginder Nagar Distt. Mandi (H.P.)

Amount

"A" Civil Work: Cutting in earth work in all kinds of classification, of soils such as pick work, jumper work blasting work saturated soils including chiseling or any other mixed variety of soils, dewatering and / or removal of slush and other incidentals, lift up to any height stacking excavated soil up to all leads and lifts complete in all respect.

Excavation in foundation, trenches, etcetra in earth work in all kinds of classification, of soils such as pick work, jumper work blasting work and chiseling work (where blasting is not possible) stacking the excavated soil up to all leads from the edge of excavation and then returning the stacked soil in 15 cm (fifteen centimetre) layer when required into plinths, sides of foundation etcetra consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated earth to the disposal point within all leads and lifts complete in all respect as per the direction of Engineer-in-Charge.

Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetra with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in foundation, footings bases of columns etcetera and mass concrete including carriage of materials within all leads and lifts and other incidentals complete in all respect.

Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetra with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns, pillars, posts and struts circular or curved in plan including carriage of materials within all leads and lifts complete in all respect as per direction of Engineer in Charge.

Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetra with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beam, cantilever, girders and lintels, sides and soffits of beams beams haunching below supporting cantilevers girders bressumers and lintels of any depth including carriage of materials within all leads and lifts complete in all respect.

Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetra with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surface such as soffits of suspended floors, roofs, landings and the like upto any thickness including carriage of materials within all leads and lifts complete in all respect as per direction of Engineer in Charge.

Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors and walls of any width including carriage of materials within all leads and lifts complete in all respect as per direction of Engineer in Charge.

Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters, buttresses, plinth and string courses and the like including carriage of materials within all leads and lifts complete in all respect as per direction of Engineer in Charge.

Providing and laying cement concrete 1:4:8 (One cement : Four sand : Eight graded/crushed crushed stone aggregate 25mm (Twenty five millimetre) nominal size) mechanically mixed, vibrated and curing complete excluding cost of form work in foundation and plinth including carriage of materials within all leads and lifts complete in all respect.

Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stone of approved quality/quarry in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement : six sand : twelve graded/crushed crushed stone aggregate 20mm (Twenty millimetre) nominal size) at plinth level in cement mortar 1:6 (one cement : six sand) including curing and carriage of materials within all leads and lifts complete in all respect as per direction of Engineer in Charge.

Providing and laying cement concrete 1:5:10 (One cement : Five sand : Ten graded/crushed crushed stone aggregate 40mm (Forty millimetre) nominal size) mechanically mixed, vibrated and curing complete excluding cost of form work in foundation and plinth including carriage of materials within all leads and lifts complete in all respect.

Providing and laying cement concrete 1:6:12 (One cement : Six sand : Twelve graded/crushed/crushed stone aggregate 40mm (Forty millimetre) nominal size) mechanically mixed and curing complete excluding cost of form work in foundation and plinth including carriage of materials within all leads and lifts complete in all respect.

Providing and laying cement concrete 1:2:4 (one cement : two sand : four graded/crushed stone aggregate 20mm (twenty millimetre) nominal size and curing complete excluding cost of form work and reinforcement for reinforced concrete work in foundation footings bases of coloumns and the like and mass concrete including carriage of material within all leads and lifts complete in all respect.

Providing and laying cement concrete 1:1.5:3 (one cement : one and half sand : three graded/crushed stone aggregate 20mm (twenty millimetre) nominal size and curing complete excluding cost of form work and reinforcement for reinforced concrete work incoluman,pillar,posts and structs upto floor two level as per the direction of Engineer-in-Charge including carriage of material within all leads and lifts complete in all respect.

Providing and laying cement concrete 1:2:4 (one cement : two sand : four graded/crushed stone aggregate 20mm (twenty millimetre) nominal size and curing complete excluding cost of form work and reinforcement for reinforced concrete work in suspended floor roofs, landings and shelves and their supports, balconies, beams, girder bressumers and cantilever upto any floor level including carriage of material within all leads and lifts complete in all respect.

Providing and laying cement concrete 1:1:2 (one cement : one sand : two graded/crushed stone aggregate 20mm (twenty millimetre) nominal size and curing complete excluding cost of form work and reinforcement for reinforced concrete work in wall any thickness ( but not exceeding 0.10m( point ten meters thickness including attached pilasters, buttersses,plinth and string courses etc. including carriage of material within all leads and lifts complete in all respect.

Providing and laying M-20 grade of cement concrete with minimum cement content of 320Kg. (Three hundred twenty Kilogram) per Cubic metre with graded/crushed, crushed stone aggregate 20mm (Twenty millimetre) nominal size mechanically mixed and vibrated reinforced concrete chajjas upto any thickness including finishing the exposed surface with cement mortar 1:3 (one cement : three sand) to give smooth and even surface centering/form work and curing complete excluding cost of reinforcement upto floor all level including carriage of materials within all leads and lifts complete in all respect.

Providing Tor steel reinforcement for RCC work including bending binding and placing in position including cost of binding wire complete in all floors including carriage of materials within all leads and lifts complete in all respect.

Second class brick work using common burnt clay building bricks of approved kiln in super structure upto all height and depth in cement mortar 1:6 (one cement : six sand) including curing complete and carriage of materials within all leads and lifts complete in all respect.

Second class half brick masonry in common burnt clay building bricks of approved kiln in super structure above plinth level upto floor all level in cement mortar 1:4 (One cement : four sand) and curing complete including carriage of materials within all leads and lifts complete in all respect.

Providing second class deodar wood work in frames of doors, windows, clere story windows and other frames wrought framed and fixed in position including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 40mm (thirty five millimetre) thick in second class deodar wood panelled glazed or panelled and glazed shutter for doors windows and clere story windows including black enameled iron butt hinges with necessary screws including carriage of material within all leads, lifts and other incidental charges complete in all respect.

Providing and fixing 40mm (forty millimeter) thick second class deodar wood wire gauge shutters using galvanized MS wire gauge of IS gauge designation 85g (Eighty five) gauge with wire of diameter 0.56mm (zero point five six millimeter) for doors, windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws including carriage of material with in all leads, lifts and other incidental charges complete in all respect.

Providing and fixing M.S. plain grills of required pattern and design in iron frames of windows etcetra with flats square or round bars with round headed bolts and nuts or by screws complete in all respect including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing factory made phenol bonded (ALPRO or equavalent) ISI marked No. IS-1003 flush door shutters 40mm (forty millimetre) thick interior grade, commercial type core of black board construction with frame of Ist class hard wood and well matched commercial ply veneering with vertical grains of cross bands and face venneers on both face of shutters including carriage of materials within all leads and lifts complete in all respect.

Providing 40x3mm (forty into three millimetre) flat iron hold fast 40cm (forty centimetre) long including fixing to frame with 10mm (ten millimetre) diametre bolts, nuts and wooden plugs and embeding in cement concrete block 30x10x15cm (thirty into ten into fifteen centimetre) 1:3:6 (one cement : three sand : six graded/crushed crushed stone aggregate 20mm (twenty millimetre) nominal size) including carriage of materials within all leads and lifts complete in all respect.

Supplying and fixing plain glass 5.5mm (five point five millimetre) thick panes with putty and nials including removal of broken glass panes wherever necessary including carriage of materials within all leads, lifts and other incidental charges complete in all respect.

Providing and fixing 250x16mm (two hundred fifty into sixteen millimetre) bright finished brass sliding door bolts with nut and screws etcetera complete as approved by the Engineer-In-Charge complete in all respect including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 300x16mm (three hundred into sixteen millimetre) bright finished brass sliding door bolts with nut and screws etcetera complete as approved by the Engineer-In-Charge complete in all respect including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 200x10mm (two hundred into ten millimetre) bright finished brass tower bolts (barrel type) with screws etcetra complete as approved by the Engineer-In-Charge including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 150x10mm (one hundred fifty into ten millimetre) bright finished brass tower bolts (barrel type) with screws etcetra complete as approved by the Engineer-In-Charge including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 100mm (one hundred millimetre) bright finished brass handles with necessary screws etcetra complete as approved by the Engineer-In-Charge including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 125mm (one hundred twenty five millimetre) bright finished brass handles with necessary screws etcetra complete as approved by the Engineer-In-Charge including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 200mm (two hundred fifty millimetre) bright finished hard drawn hooks and eyes as approved by the Engineer-In-Charge including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 100mm (one hundred millimetre) bright finished brass floor door stopper with rubber cushion screws etcetra to suit shutter thickness complete in all respect including carriage of materials within all leads, lifts and other incidental charges.

Providing and fixing 10mm (ten millimetre) thick antiskid water proof stain and impact resistent hevy duty viterified tiles nitco or equivalent 600x600x10mm (six hundred into six hundred into ten millimetre) manufactured of approved shade and colour in flooring treads of steps and landings laid over 12mm (twelve millimetre) thick cement mortar 1:3 (one cement : three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required including carriage of material within all leads, lifts and other incidental chages complete in all respect.

25mm (twenty five millimeter) thick kota stone slab flooring 20mm (twenty millimeter) thick base of cement mortar 1:4 (one cement : four sand) laid over and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and carriage of material within all leads and lifts complete in all respect.

Providing and laying granite stone in flooring 20mm (twenty millimetre) (average) thicknees base of cement mortar 1:3 (one cement : three sand) laid over and jointed with grey cement slury mixed with pigment to match the shade of granite stone including rubbing and polishing complete 20mm (twenty millimetre) thick including curing and carriage of materials within all leads and lifts complete in all respect.

40mm (forty millimeter) thick cement concrete flooring 1:2:4 (one cement : two sand : four graded/crushed crushed stone aggregate 20mm (twenty millimeter) nominal size) laid in one layer finished with a floating coat of neat cement complete in all respect including curing complete and carriage of materials within all leads and lifts.

White glazed tiles 6mm (six millimetre) thick in skirting riser of steps and dado 12mm (twelve millimetre) thick cement mortar 1:3 (one cement : three sand) and jointed with cement slurry complete upto all floor level in all respect including carriage of materials within all leads and lifts.

25mm (twenty five millimeter) thick kota stone in riser of steps,skirting dado and pillar laid on 12mm ( twelve millimetre) ( average) cement mortar 1:3 (one cement : three sand) laid over and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and carriage of material within all leads and lifts complete in all respect.

Providing and laying spartic ceremic tiles 5.5mm (five point five millimetre) thick in flooring (300x300mm (three hundred into three hundred millimetre) size) treads of steps laid on a bed of 12mm (twelve millimetre) thick cement mortar 1:3 (one cement : three sand) finished with flush pointing in white cement including carriage of materials within all leads and lifts complete in all respect.

Applying priming coat over new steel and other metal surface after and including preparing the suface by thourly cleaning the oil, grease, dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete with ready mixed priming paint brushing red lead, redoxide/zinc oxide chrome including carriage of materials within all leads and lifts complete in all respect.

Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint other than white brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter including carriage of materials within all leads and lifts complete in all respect.

Applying priming coat over new wood and wood based surface after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting with ready mixed paint brushing wood primer pink complete including carriage of materials within all leads and lifts complete in all respect.

Painting two coats (excluding priming coat) on new wood and wood based surfaces, with enamel paint other than white to give an even shade including cleaning the surface of all dirt, dust and other foreign matter, sand papering and stopping including carriage of materials within all leads and lifts complete in all respect.

6mm (six millimeter) thick cement plaster to ceiling with cement mortar 1:3 (one cement : three sand) including curing and carriage of materials within all leads and lifts complete in all respect.

15mm (Fifteen millimeter) cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto floor all level including arrises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (eighty millimeter) in girth and finished even and smooth in cement mortar 1:6 (one cement : six sand) including curing complete and carriage of materials within all leads and lifts complete in all respect.

15mm (Fifteen millimeter) cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto floor all level including arrises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (eighty millimeter) in girth and finished even and smooth in cement mortar 1:3 (one cement : three sand) including curing complete and carriage of materials within all leads and lifts complete in all respect.

Applying Birla White wall care putty over plaster surface after throughly brushing the suface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the suface including carriage of materials within all leads and lifts complete in all respect.

Distempering (Two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after throughly brushing the surface free from mortar droopings and other foreign matter and also including preparing the surface even and sand papered smooth on walls including carriage of material with in all leads, lifts and other incidentals complete in all respect.

Applying one coat of Acrylic primer (spectrum or equivalent of superior quality) on new concrete/masonry/plastered surface after and including preparing the surface by thoroughly burshing the surface free from mortar dorppings and other foreign matter, sand papering the surface smooth including carriage of materials within all leads and lifts complete in all respect.

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt and other foreign matter etcetera including sand paper smooth complete including carriage of materials within all leads and lifts complete in all respect.

Providing under layer for plinth protection of 75mm (seventy five millimeter) thick (unconsolidated) bed of dry brick/stone aggregate 40mm (forty millimeter) nominal size well rammed and consolidated and grouted with fine sand including preparation of ground including carriage of materials within all leads and lifts complete in all respect.

Providing plinth protection 50mm (fifty millimeter) thick in cement concrete 1:3:6 (one cement : three sand : six graded/crushed crushed stone aggregate 20mm (twenty millimeter) nominal size including finishing the top surface of concrete smooth including curing complete and carriage of materials within all leads and lifts complete in all respect.

Water Supply and Sanitary Installation: Providing and fixing veterious China wash down water closet (European type W.C. pan) with integral “P” or “S” trap including jointing the trap with soil pipe in cement mortar 1:1 (one cement :one sand) (seat and cover to be measured and paid for separately) complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing Orrisa pattern vitreous China wash down water closet squatting pan (Indian type W.C.pan)size 580mm (five hundred eighty millimetre) (earth work, bed concrete, foot rest and trap to be measured and paid for separately) including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 10 to 12.50 ltrs (ten to twelve point five liters) vertious china low level flushing cistern with a pair mild steel bracket compete with fitting such as lead valve less syphon, 15mm (fifteen millimeter) nominal size brass ball valve with polythine float, C.P. brass handles unions and coupling for connections with inlet outlet and over flow pipes 40mm (forty millimeter) diameter C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (over flow pipe to be measured and paid for separately) including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing plastic seat (sold/hollow type) and cover for wash down water closet with CP brass hinges and rubber buffers solid type with white plastic seat and cover including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing G.I. inlet connection for flush pipe with W.C. pan including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing flat back 630x450mm (six hundred thirty into four hundred fifty millimeter) vitreous china wash basin with single hole for pillar tap with CI or MS brackets painted white including cutting holes and making good the same but excluding fittings complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing 610 x 510 x 200 mm ( six hundred ten into five hundred ten into two hundred millimetre) stainless steel kitchen sink of approved standrad ISI make with drain board and CP waste with C.I. or M.S. brackets, painted white including cutting hole and making good the same but excluding fitting including carriage of material within all leads and lifts complete in all respect.

Providing and fixing 32mm (thirty two millimetre) diametre CP brass waste heavy duty for wash basin or sink complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing 100mm (one hundred millimetre) sand cast iron grating for gully, floor or nahni trap complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing 15mm (fifteen millimetre) diametre C.P.brass bib tap heavy duty with capstan head including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 15mm (fifteen millimetre) diametre C.P. brass pillars tap heavy duty capstan head including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing CP brass angle valve 15mm (fifteen millimetre) without nut and pipes complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing mixer for kitchen sink with casted swining spout at top including carriage of materials within all leads, lifts and other incidental charges complete in all respect.

Providing and fixing 600x450mm (six hundred into four hundred fifty millimetre) bavelled edge mirror of superior glass mounted on 6mm (six millimetre) thick AC sheet or ply wood sheet and fixed to wooden plugs with CP brass screws and washers complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing 600 x 20mm (six hundred into twenty millimetre) CP brass towel rail complete with CP Brass brackets fixed to wooden plugs with CP brass including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing CP brass toilet paper holder complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing PTMT jet spray of approved quality and colour with 1.50 (one point five zero ) metre tube complete in all respect including carriage of material with in all leads lifts and other incidentials.

Providing and fixing PVC connection pipe with brass unions 45cm (forty five centimeter) long 15mm (fifteen millimeter) nominal bore complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing brass full way valve with wheel complete in all respect including carriage of materials within all leads and lifts.

15mm (fifteen millimeter) nominal bore

20mm (twenty millimeter) nominal bore

Providing and fixing to wall, ceiling and floor galvanized mild steel tubes (medium grade) tube fitting and clamps including making good the walls, ceiling and floor complete in all respect including carriage of materials within all leads and lifts complete in all respect.

15mm (fifteen millimeter) nominal bore

20mm (twenty millimeter) nominal bore

Providing and laying 20mm (twenty millimetre) nominal bore galvanized mild steel tube (medium grade) tube fitting in trenches (earth work in trenches to be measured and paid for separately) complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing G.I/M.I Union of following sizes ( where not including in the item including carriage of materials within all leads, lifts and other incidental charges complete in all respect.

Providing and fixing PVC 1000 ltr. (one thousand litre) water storage tank of ISI : 12701 marked, G.I. inlet and outlet connection, 15 mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting upto all height above ground level including carriage of material with in all leads, lifts and other incidentals.

Providing and fixing 110mm x 75 mm (one hundred ten into seventy five millimetre) diametre PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etcetra complete in all respect including carriage of material with in all leads, lifts and other incidentals.

Providing and fixing 110mm x 90 mm (one hundred ten into ninety millimetre) diametre PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etcetra complete in all respect including carriage of material with in all leads, lifts and other incidentals.

Providing and fixing 75mm (seventy five millimetre) diametre pipes on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5kg/sqm (four point five kilogram per square metre) including filling the joints with approved adhesive complete including carriage of materials within all leads, lifts and other incidental charges.

Providing and fixing 100mm (one hundred millimetre) diametre pipes on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5kg/sqm (four point five kilogram per square metre) including filling the joints with approved adhesive complete including carriage of materials within all leads, lifts and other incidental charges.

Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3mm (three millimetre) thick bolts and nuts complete including fixing with approved adhesive etcetra complete in all respect including carriage of materials within all leads and lifts.

75mm (seventy five millimetre) nominal size

110mm (one hundred ten millimetre) nominal size

Providing and fixing 75 mm dia (seventy five millimetre diametre) PVC door bend with oval access door, ISI marked insertion rubber washer 3 mm (three millimetre) thick bolts and nuts complete including fixing with approved adhesive etcetra complete in all respect including carriage of material with in all leads, lifts and other incidentals.

Providing and fixing 110 mm dia (one hundred ten millimetre diametre) PVC door bend with oval access door, ISI marked insertion rubber washer 3 mm (three millimetre) thick bolts and nuts complete including fixing with approved adhesive etcetra complete in all respect including carriage of material with in all leads, lifts and other incidentals.

Providing and fixing 75 mm dia (seventy five millimetre diametre) PVC collars ISI marked including fixing with approved adhesive etcetra complete in all respect including carriage of material with in all leads, lifts and other incidentals.

Providing and fixing 110 mm dia (one hundred ten millimetre diametre) PVC collars ISI marked including fixing with approved adhesive etcetra complete in all respect including carriage of material with in all leads, lifts and other incidentals.

Providing and fixing PVC Plain bend 75mm (seventy five millimetre) diametres ISI marked including fixing with approved adhesive etcetra complete in all respect including carriage of material with in all leads, lifts and other incidentals.

Providing and fixing PVC Plain bend 110mm (one hundred ten millimetre) diametres ISI marked including fixing with approved adhesive etcetra complete in all respect including carriage of material with in all leads, lifts and other incidentals.

Constructing brick masonry chamber for under group C.I inspection chamber and bends with common burnt clay bricks in cement mortar 1:5 (one cement :five sand) C.I cover with frame (light duty) 355x610mm (three hundred fifty five into six hundred ten millimetre) internal dimensions total weight of cover with frame to be not less than 38 Kg. (thirty eight kilogramme) (weight of cover 23 Kg. (twenty three kilogramme) and weight of frame 15 Kg.(fifteen kilogramme)) RCC top slab with 1:2:4mix in (one cement : two sand : four graded stone aggregate 20 mm (twenty millimetre) nominal size) foundation concrete 1:5:10 (one cement :five sand : ten graded stone aggregate 40 mm (forty millimetre) nominal size) inside plaster 15mm (fifteen millimetre) thick with cement mortar 1:3 (one cement : three sand ) finished smooth with a floating coat of neet cement on walls and bed concrete etcetra complete inside dimensions 455x610x450mm (four hundred fifty five into six hundred ten into four hundred fifty millimetre) deep single pipe line complete in all respect including carriage of materials within all leads and lifts.

Constructing brick masonry chamber for under group C.I inspection chamber and bends with common burnt clay bricks in cement mortar 1:5 (one cement :five sand) C.I cover with frame (light duty) 355x610mm (three hundred fifty five into six hundred ten millimetre) internal dimensions total weight of cover with frame to be not less than 38 Kg. (thirty eight kilogramme) (weight of cover 23 Kg. (twenty three kilogramme) and weight of frame 15 Kg.(fifteen kilogramme)) RCC top slab with 1:2:4mix in (one cement : two sand : four graded stone aggregate 20 mm (twenty millimetre) nominal size) foundation concrete 1:5:10 (one cement :five sand : ten graded stone aggregate 40 mm (forty millimetre) nominal size) inside plaster 15mm (fifteen millimetre) thick with cement mortar 1:3 (one cement : three sand ) finished smooth with a floating coat of neet cement on walls and bed concrete etcetra complete inside dimensions 600x850x450mm (six hundred into eight hundred fifty into four hundred fifty millimetre) deep for pipe lines with three or more inlets complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x430x265mm size (four hundred thirty into two hundred sixty into three hundred fifty millimetre and three hundred forty into four hundred thirty into two hundred sixty five) respectively with automatic flushing cistern with fittings R.S or C.I brackets standred size galvanised steel flush pipe and spreaders galvanised steel flush pipe and spreaders with brass unions and G.I clamps complete,including painting of cistern and fitting, cutting and making good the walls,floors where required:- Range of two urinal basins with 10 litres C.I automatic flushing cistern, complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing vitreous China division Plate for urinals 600mmx300 mm (six hundred into three hundred millimetre) complete in all respect including carriage of materials within all leads and lifts.

Constructing man hole with RCC top slab in 1:2:4 mix (one cement : two sand : four graded crushed stone aggregate 20mm (twenty millimetre) nominal size) foundation concrete 1:4:8 (One cement : four sand : eight graded crushed stone aggregate 40mm (forty millimetre) nominal size) in side plastering 15mm (fifteen millimetre ) thick with cement mortar 1:3 (one cement : three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two sand : four graded crushed stone aggregate 20mm (twenty millimetre) nominal size) finished smooth complete including curing and testing inside size 800x800mm (eight hundred into eight hundred millimetre) and 500mm(five hundred millimetre) deep including CI cover with frame (light duty single seal pattern-I) 455x610mm (four hundred fifty five into six hundred ten millimetre) internal dimension total weight of cover and frame to be not less than 38Kg. (Thirty eight kilograme) (weight of cover 23Kg. (twenty three kilograme) and weight of frame 15Kg. (fifteen Kilogramme) with 200mm (Two hundred millimetre) thick precast concrete block masonry walls with solid concrete blocks of cement concrete 1:3:6 (one cement : three sand : six graded stone aggregate 20mm (twenty millimetre) and down gauge) laid in cement mortar 1:6 (one cement : six sand) as per HP.PWD. specification and as directed by the Engineer-In-Charge complete in all respect including curing and carriage of materials within all leads and lifts.

Sandeep Anand