Termination of incomplete 132KV ELDECO (Sitarganj)-Kichha transmission line using multi circuit towers at 132KV S/s, Kichha end under 220KV OandM Division, PTCUL, Pantnagar

Fabrication, Galvanizing & Supply of Normal Stub of HT grade material for 132 KV Multi circuit Tower type "1NMC' (30'-60') with cleat including Nuts & Bolt.

Fabrication, Galvanizing & Supply of template of MS grade material for 132 KV Multi circuit Tower type "1NMC' (30'-60') with cleat including Nuts & Bolt.

ACSR Panther Conductor.

Single Tension fitting for ACSR Panther Conductor suitbale for 120 KN Disc Insulator.

Double Tension fitting for ACSR Panther Conductor suitbale for 120 KN Disc Insulator.

Single suspension fitting for ACSR Panther Conductor suitbale for 70 KN Disc Insulator.

Disc Insualtor 120 KN.

132 KV Polymer insulator 120 KN.

132 KV CT ratio 800/400/1 5 core 0.2 s (1-phase) with terminal connectors.

Junction box CT/PT.

132 KV lightening Arrester with surge counter meter with connectors.

145 kv Bus Post Insulators with run through connectors.

Disc lnsualtor 70 KN.

Vibration damper for Panther Conductor.

Mid span compression joint for ACSR Panther Conductor.

Flexible Copper Bond.

Repair sleeve for Panther Conductor.

Danger plate.

Number plate.

Phase Plate (set of three).

Circuit Plate (set of two).

Anti-Cllmblng devlce.

Pipe type earthing (set of two nos. for each tower).

Lattice structure with Bolts and nuts.

Optical Fiber Ground Wire Cable (OPGW-24 Fiber) for 132 kV Line.

Vibration Damper suitable for OPGW-24 Fiber Cable).

Reinforcing rod.

Splice enclosure alongwith downlead clamp as required for OPGW-24 Fiber Cable.

All required hardware such as Tension assemblies, earthing bond, and downlead clamps as needed for a tension tower suitable for 24 Fibre OPGW on 132/220KV lines.

Item Rate

Description of materail

Part-B (Erection)

Survey, Profiling, Alignment etc. including prepration of Tower schedule, Check survey, pegmarking of Iocations,Optimisation of tower locations etc.

Setting of Stubs, inlcuding all foundation work but excluding the cost of concreting and excavation.

(a)132 KV Multi Circuit Tower type (300 60°).

Concrete for foundations including all material, shoring and shuttering if any, forming, concreting and curing of water inlcuding cost of cement for concrete (cost of supply of MSsteel bar is not to be included).

Excavation of foundation pits including all earthwork, backfilling and levelling etc.

Super structure erection of various type of towers, tower part, tower extention (complete) with bolts & nuts and including all work above ground level excluding hoisting of insulators & fitting of danger plate, number plate, phase plate, circuit plate, anti climbing devices and bird guards, but including punching of bolts.

Multi Circuit Tower type tower including Erection of Body Extension (i.e. 3 mtr./6 mtr./9 mtr.).

Laying, Stringing Tensioning, clamping, jointing etc. complete with ACSR Panther conductor including hoisting of insulators and fitting of vibration dampers, jumpers at tower etc. for complete route of single Circuit line (2 Phase) on D/C tower with Panther conductor.

Dismantling of existing 132 kV towers with all associated activities such as proper stacking of retrieved materials and safely transportation of all removed material and safe storage in the departmental store as directed by the Engineer-in-Charge.

Dismantling of all 3 phase of existing ACSR Panther Conductor of the 132 KV Double Circuit Line along with all associated activities such as de-stringing, dismantling of all Hardware fittings & Conductor accessories e.g. armour rod, vibration damper, insulator strings etc, of existing line and re-rolling of dismantled conductor on empty drums for re-use, proper stacking of retrieved materials and safely transportation of all removed material and safe storage in the departmental store as directed by the Engineer-in-Charge.

Dismantling of existing Earth wire/OPGW of the 132 KV Double Circuit Line along with all associated activities such as de-stringing, dismantling of all Hardware fittings & Conductor accessories e.g. armour rod, vibration damper, etc, of existing line and re-rolling of dismantled conductor on empty drums for re-use, proper stacking of retrieved materials and safely transportation of all removed material and safe storage in the departmental store as directed by the Engineer-in-Charge.

Optical Fiber Ground Wire Cable (OPGW-48 Fiber). Vibration Damper suitable for OPGW-48 Fiber Cable). Reinforcing Rod. All required hardware such as Tension assemblies, earthing bond, armour rod and downlead clamps as needed for a tension tower suitable for 48 Fibre OPGW on 132/220KV lines. Splice enclosure alongwith downlead clamp as required for OPGW-96 Fiber Cable.

Grounding work with Pipe type earthing (set of two nos. for each tower) and backfilling excluding cost of earthing material.

Concrete for foundations of Substation structures, boundary wall etc. including all material, shoring and shuttering if any, forming, concreting and curing of water inlcuding cost of cement for concrete (cost of supply of MS steel bar is not to be included).

Excavation including all earthwork, backfilling and levelling etc. P. S.

Cost of cement concreting in 1:4:8 ratio.

Brick work in ratio 1:4

Plastering 12 mm in ratio 1:4

Tack welding on bolts and nuts on 1st section of towers.

Danger plate.

Number plate.

Phase Plate (set of three).

Circuit Plate (set of two).

Anti-Climbing device.

MS Steel bars for reinforcements (Including Supply).

Lattice structure with Bolts and nuts( erection & dismantling work).

Erection/ dismanteling145 kV Capactive Voltage Transformer 1-phase without junction box.

Junction box.

Erection/dismanteling 120KV Surge Arrestors / Lighting Arrester.

Erection of 132KV CT with junction box.

Dismanteling of 132 kV CT with junction box.

Erection of 132KV Lightening arrestors.

Dismanteling of 132KV Lightening arrestors.

145KV Bus Post Insulators.

Making arrangements for safe crossing of NH, UPCL lines etc. including all the necessary statutory compliances and approvals from concerned appropriate authorities.

Designing, fabrication and Fixing of Auxilarycross Arm.

Dismantling of slack span of CPP line and shifting it to the existing Rudrapur bay including special arrangements for dropping the conductors including all the associated work.

Connecting the Rudrapur line to the CPP line at common tower to feed Kichha substation thru CPP & Rudrapur line during erction of multicircuit towers and stringing work and disconnection of the same after completion of work.

Providing and fixing of various clamps, fixtures and connectors required to accomplish the work for above work.

Dismantling of existing old foundation of tower location no 98 and 99 of 132KV Sitarganj Kichha line to erect the new Multicircuit tower to properly terminate the 132KV ELDECO (Sitarganj)-Kichha Transmission Line at 132KV Substation Kichha end.

Item Rate

Particulars

Total Part-B (Erection) from BoQ2 sheet WITHOUT GST

Add GST* Amount on (Total of Part-A + Total of Part-B above)