Kerala

AOC

Works

Civil Works - Water Works

ustainability Support to Community Management Water Supply Schemes- 2025-26 Moothedam GP

Kerala Rural Water Supply and Sanitation Agency

Moothedam GP | Malappuram, Kerala

Amount: ₹11.9 LCloses: 28 May 2026Closed

Timeline

Published20 May 2026
Closed28 May 2026
Awarded12 Oct 2026

Bids

Item Rate

2 Bids12 Oct 2026

#	Company	Amount	Rank	Status
1	Shaji KC L1₹11.8 LAccepted-AOC SULTHAN BATHERY WAYANAD \| SULTHAN BATHERY \| WAYANAD \| KERALA	₹11.8 L	L1	Accepted-AOC Lowest among the quoted was accepted
2	SANIL CR L2₹11.9 L+₹4,210 (0.36%)Rejected-Finance CHEMBIL PADICHIRA PULPALLY WAYANAD KERALA \| PULPALLY \| WAYANAD \| KERALA	₹11.9 L+₹4,210 (0.36%)	L2	Rejected-Finance Highest among the quoted

BoQ Comparative

Line Items (24)

Sl No	Description	Qty	Unit	SANIL CR L2	Shaji KC L1
1.00Appendix A : Poovundakunne WSS
1.01	Repair & Maintenance of well Desilting open wells of dia above 3.5m and up to 6.0m and depth up to 9.0m by earth work excavation in or under water, after closing the inlet valves and plugging any holes in the steining by engaging divers with breathing accessories, bailing out water using pump set of suitable capacity, lifting the excavated silt/mud/clay using ropes, pulleys and buckets and disposing the same within minimum lead of 50 m from the periphery of the well, including engaging coolies for scrapping the inner side of the well, without causing any damages to the existing structures and installations, including hire and conveyance of tools and plant and as per the directions of the department officers etc. complete.	65	cum	1,850 ₹1,20,246.3	1,842.9 ₹1,19,784.81 Lowest
1.02	Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using flats 30x6 mm for diagonal braces and central cross piece	1.71	sqm	5,315.86 ₹9,090.12 Lowest	5,315.86 ₹9,090.12 Lowest
1.03	Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to given an even shade:New work (two or more coats) including coat of approved steel primer but excluding a coat of mordant solution.	3.23	sqm	180 ₹581.4	173 ₹558.79 Lowest
1.04	Lettering with black Japan pint of approved brand and manufacture	800	per letter per cm height	6 ₹4,800	5 ₹4,000 Lowest
1.05	Providing and fixing G.I. pipes (medium) complete with G.I fittings including trenching and refilling etc. External work65 mm dia nominal bore	40	metre	885.28 ₹35,411.2 Lowest	885.28 ₹35,411.2 Lowest
1.06	Providing and fixing G.I. pipes (medium) complete with G.I fittings including trenching and refilling etc. External work50 mm dia nominal bore	6	metre	760 ₹4,560	753.52 ₹4,521.12 Lowest
1.07	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :65 mm nominal bore	2	each	1,717.03 ₹3,434.06 Lowest	1,717.03 ₹3,434.06 Lowest
1.08	Providing and fixing gun metal non-return valve of approved quality (screwed end): 65 mm nominal boreHorizontal	1	each	2,411.72 ₹2,411.72 Lowest	2,411.72 ₹2,411.72 Lowest
1.09	12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)	5.94	sqm	342 ₹2,031.48	339.63 ₹2,017.4 Lowest

Tender Value

₹11.9 L

EMD Value

₹30,000

Closing Date

28 May 2026, 12:00 pmClosed

Tender Inviting Organisation

Name

Regional Project Director

Address

Kerala Rural Water Supply and Sanitation Agency, Regional Project Management Unit, Malappuram, MMC.X/108-112, UMK Tower, Uphill, Jubilee Road, Near Passport Office, Malappuram P.O. - 676 505

Work Description

Sustainability Support to Community Management Water Supply Schemes- 2025-26 -Poovundakunne WSS in Moothedam Gramapanchayath - Malappuram District

Tender Information

Tender ID

2026_KRWSA_851973_1

Reference Number

KRWSA/MPM/SUS/MTM/25-26/29

Tender Type

Open Tender

Product Category

Civil Works - Water Works

Form of Contract

Item Wise

Period of Work

120 days

Location

Moothedam GP

Source Website

Subscribe to view

Eligibility / Pre-Qualification

As per tender document

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical/Finance

RequiredForm of Tender, Preliminary Agreement (.pdf)

RequiredIntegrity Pact Certificate, Affidavit (.pdf)

RequiredDigitally signed Tender conditions (NIT) and other documents (.pdf)

RequiredContract License (.pdf)

RequiredExperience certificate, Adhar card, Bank passbook front page (.pdf)

RequiredPAN Card, GST registration (.pdf)

RequiredFilled BOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹2,500

EMD Fee Amount

₹30,000

Important Dates

Last Activity

12 Oct 2026

Published

20 May 2026

Bid Opening

29 May 2026

Download Starts

20 May 2026

Download Ends

28 May 2026

Submission Starts

20 May 2026

Clarification Period

20 May 2026 - 28 May 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (24 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Appendix A : Poovundakunne WSS
1.01	Repair & Maintenance of well Desilting open wells of dia above 3.5m and up to 6.0m and depth up to 9.0m by earth work excavation in or under water, after closing the inlet valves and plugging any holes in the steining by engaging divers with breathing accessories, bailing out water using pump set of suitable capacity, lifting the excavated silt/mud/clay using ropes, pulleys and buckets and disposing the same within minimum lead of 50 m from the periphery of the well, including engaging coolies for scrapping the inner side of the well, without causing any damages to the existing structures and installations, including hire and conveyance of tools and plant and as per the directions of the department officers etc. complete.	0.2	cum	-	-
1.02	Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using flats 30x6 mm for diagonal braces and central cross piece	-	sqm	-	-
1.03	Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to given an even shade:New work (two or more coats) including coat of approved steel primer but excluding a coat of mordant solution.	-	sqm	-	-
1.04	Lettering with black Japan pint of approved brand and manufacture	-	per letter per cm height	-	-
1.05	Providing and fixing G.I. pipes (medium) complete with G.I fittings including trenching and refilling etc. External work65 mm dia nominal bore	-	metre	-	-
1.06	Providing and fixing G.I. pipes (medium) complete with G.I fittings including trenching and refilling etc. External work50 mm dia nominal bore	-	metre	-	-
1.07	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :65 mm nominal bore	-	each	-	-
1.08	Providing and fixing gun metal non-return valve of approved quality (screwed end): 65 mm nominal boreHorizontal	-	each	-	-
1.09	12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)	-	sqm	-	-

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.04 MB

Technical Evaluation

tech_eval.pdf

PDF

Financial Evaluation

fin_eval.pdf

PDF

Award of Contract

aoc.pdf

PDF

Bid Opening Summary

finance_1439587.pdf

PDF

boq_comp_chart.xlsx

xlsx

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.13 MB

Work Item Documents

formatsmtm.pdf

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

Shaji KC

L1₹11.8 LAccepted-AOC

SULTHAN BATHERY WAYANAD | SULTHAN BATHERY | WAYANAD | KERALA

SANIL CR

L2₹11.9 L+₹4,210 (0.36%)Rejected-Finance

CHEMBIL PADICHIRA PULPALLY WAYANAD KERALA | PULPALLY | WAYANAD | KERALA

Sl No	Description	Qty	Unit	SANIL CR L2	Shaji KC L1
1.00Appendix A : Poovundakunne WSS
1.01	Repair & Maintenance of well Desilting open wells of dia above 3.5m and up to 6.0m and depth up to 9.0m by earth work excavation in or under water, after closing the inlet valves and plugging any holes in the steining by engaging divers with breathing accessories, bailing out water using pump set of suitable capacity, lifting the excavated silt/mud/clay using ropes, pulleys and buckets and disposing the same within minimum lead of 50 m from the periphery of the well, including engaging coolies for scrapping the inner side of the well, without causing any damages to the existing structures and installations, including hire and conveyance of tools and plant and as per the directions of the department officers etc. complete.	65	cum	1,850 ₹1,20,246.3	1,842.9 ₹1,19,784.81 Lowest
1.02	Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using flats 30x6 mm for diagonal braces and central cross piece	1.71	sqm	5,315.86 ₹9,090.12 Lowest	5,315.86 ₹9,090.12 Lowest
1.03	Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to given an even shade:New work (two or more coats) including coat of approved steel primer but excluding a coat of mordant solution.	3.23	sqm	180 ₹581.4	173 ₹558.79 Lowest
1.04	Lettering with black Japan pint of approved brand and manufacture	800	per letter per cm height	6 ₹4,800	5 ₹4,000 Lowest
1.05	Providing and fixing G.I. pipes (medium) complete with G.I fittings including trenching and refilling etc. External work65 mm dia nominal bore	40	metre	885.28 ₹35,411.2 Lowest	885.28 ₹35,411.2 Lowest
1.06	Providing and fixing G.I. pipes (medium) complete with G.I fittings including trenching and refilling etc. External work50 mm dia nominal bore	6	metre	760 ₹4,560	753.52 ₹4,521.12 Lowest
1.07	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :65 mm nominal bore	2	each	1,717.03 ₹3,434.06 Lowest	1,717.03 ₹3,434.06 Lowest
1.08	Providing and fixing gun metal non-return valve of approved quality (screwed end): 65 mm nominal boreHorizontal	1	each	2,411.72 ₹2,411.72 Lowest	2,411.72 ₹2,411.72 Lowest
1.09	12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)	5.94	sqm	342 ₹2,031.48	339.63 ₹2,017.4 Lowest

Sl No

Description

Qty

Unit

SANIL CR

Shaji KC

1.00Appendix A : Poovundakunne WSS

1.01

Repair & Maintenance of well Desilting open wells of dia above 3.5m and up to 6.0m and depth up to 9.0m by earth work excavation in or under water, after closing the inlet valves and plugging any holes in the steining by engaging divers with breathing accessories, bailing out water using pump set of suitable capacity, lifting the excavated silt/mud/clay using ropes, pulleys and buckets and disposing the same within minimum lead of 50 m from the periphery of the well, including engaging coolies for scrapping the inner side of the well, without causing any damages to the existing structures and installations, including hire and conveyance of tools and plant and as per the directions of the department officers etc. complete.

cum

1,850

₹1,20,246.3

1,842.9

₹1,19,784.81

Lowest

1.02

Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using flats 30x6 mm for diagonal braces and central cross piece

1.71

sqm

5,315.86

₹9,090.12

Lowest

5,315.86

₹9,090.12

Lowest

1.03

Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to given an even shade:New work (two or more coats) including coat of approved steel primer but excluding a coat of mordant solution.

3.23

sqm

180

₹581.4

173

₹558.79

Lowest

1.04

Lettering with black Japan pint of approved brand and manufacture

800

per letter per cm height

₹4,800

₹4,000

Lowest

1.05

Providing and fixing G.I. pipes (medium) complete with G.I fittings including trenching and refilling etc. External work65 mm dia nominal bore

metre

885.28

₹35,411.2

Lowest

885.28

₹35,411.2

Lowest

1.06

Providing and fixing G.I. pipes (medium) complete with G.I fittings including trenching and refilling etc. External work50 mm dia nominal bore

metre

760

₹4,560

753.52

₹4,521.12

Lowest

1.07

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :65 mm nominal bore

each

1,717.03

₹3,434.06

Lowest

1,717.03

₹3,434.06

Lowest

1.08

Providing and fixing gun metal non-return valve of approved quality (screwed end): 65 mm nominal boreHorizontal

each

2,411.72

₹2,411.72

Lowest

2,411.72

₹2,411.72

Lowest

1.09

12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

5.94

sqm

342

₹2,031.48

339.63

₹2,017.4

Lowest

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Appendix A : Poovundakunne WSS
1.01	Repair & Maintenance of well Desilting open wells of dia above 3.5m and up to 6.0m and depth up to 9.0m by earth work excavation in or under water, after closing the inlet valves and plugging any holes in the steining by engaging divers with breathing accessories, bailing out water using pump set of suitable capacity, lifting the excavated silt/mud/clay using ropes, pulleys and buckets and disposing the same within minimum lead of 50 m from the periphery of the well, including engaging coolies for scrapping the inner side of the well, without causing any damages to the existing structures and installations, including hire and conveyance of tools and plant and as per the directions of the department officers etc. complete.	0.2	cum	-	-
1.02	Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using flats 30x6 mm for diagonal braces and central cross piece	-	sqm	-	-
1.03	Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to given an even shade:New work (two or more coats) including coat of approved steel primer but excluding a coat of mordant solution.	-	sqm	-	-
1.04	Lettering with black Japan pint of approved brand and manufacture	-	per letter per cm height	-	-
1.05	Providing and fixing G.I. pipes (medium) complete with G.I fittings including trenching and refilling etc. External work65 mm dia nominal bore	-	metre	-	-
1.06	Providing and fixing G.I. pipes (medium) complete with G.I fittings including trenching and refilling etc. External work50 mm dia nominal bore	-	metre	-	-
1.07	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :65 mm nominal bore	-	each	-	-
1.08	Providing and fixing gun metal non-return valve of approved quality (screwed end): 65 mm nominal boreHorizontal	-	each	-	-
1.09	12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)	-	sqm	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Appendix A : Poovundakunne WSS

1.01

0.2

cum

1.02

sqm

1.03

sqm

1.04

Lettering with black Japan pint of approved brand and manufacture

per letter per cm height

1.05

Providing and fixing G.I. pipes (medium) complete with G.I fittings including trenching and refilling etc. External work65 mm dia nominal bore

metre

1.06

Providing and fixing G.I. pipes (medium) complete with G.I fittings including trenching and refilling etc. External work50 mm dia nominal bore

metre

1.07

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :65 mm nominal bore

each

1.08

Providing and fixing gun metal non-return valve of approved quality (screwed end): 65 mm nominal boreHorizontal

each

1.09

12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

sqm