BEUP

Amount

(Supply & Erection)

Erection of 8 mtrs length of PCC POLE at any kind of soil upto a depth of 1/6 th of pole height, including excavation of earth, refilling the pit with soil upto the ground level, ramming and making complete in all respect.

Erection of 8 mtrs length of Steel Tubular POLE at any kind of soil upto a depth of 1/6 th of pole height, including excavation of earth, refilling the pit with soil upto the ground level, ramming and making complete in all respect.

Erection of Stay set direct in earth complete with 19mm x 1800 mm long stay rod, anchor plate of size 300 x 300 x 8 mm ,thimble, turn buckle, 7/3.15 mm dia G.I Standed stay wire and stain insulator etc. with Supply of M.S.Clamp,Nuts & Bolts etc. as required. and making complete in all respect. ments from the earth electrode

Erection of M.S.Angle Cross-Arm bracket for LT LIne ,upto 1.2Mtr. Long of 50 x 50 x6mm/ 65 x65 x 6 mm ( Excluding the cost of Back Clamp, Nuts & Bolts)

Erection of "C" type bracket for LT5-wire of 50 x 50 x6mm / 65 x 65 x 6 mm (Excluding the cost of Back Clamp, Nuts & Bolts)

Erection of shackle insulator of size 75mm x 90mm /100mm x 15mm with straps & bolts/U clamp on poles (Excluding the cost of cost of straps/ U Clamp, Nuts & Bolts)

Erection of Danger Plate on OH lines (11KV/415 Volts)

Erection of protective Guarding/Cross lacing for 415/240Volt line BY GI wire 8 SWG as per technical specification,across road/River/Telecom line etc. in horizontal/Verticle formation complete with Spool/Reel insulator.

Laying & Stringing of 1KM (Single Conductor) ACSR 6/1/2.59 mm dia 'WEASEL' including hoisting & binding etc. Complete at HT LT line as required.

Laying & strining of 1KM (Single Conductor) , 8SWG GI wire including hoisting & binding etc. Complete at HT/LT line as required.

Grouting of steel tubuler poles /stay set with CC of ratio 1:2:4(1 cement : 2 river sand : 4 Jhama brick aggregate of 20 mm nominal size)i/c supply of cement,sandand brick aggregate20 mm nominal size complete with excavation, refilling of earth ,ramming alonf with centeringand shutteringaas required @ 0.273 cum per Steel tubuler pole.

Applying paints with ready mixed primer of approved primer of approved quality on steel works including painting (two or more coats ) with alluminum paint of approved quality new works to give an even shade .

Febrication of the MS Channel / angles .

Supply of febricated clamps of assorted size of MS flat (50 x 6 mm) with double coat of red oxide primer coating.

Maintaining adequate clearance from overhead live conductors by Trimming of tree branches for Way Leaves.

Supply of Stay set complete with 19mm x 1800 mm long stay rod, anchor plate of size 300 x 300 x 8 mm ,thimble, turn buckle, with Supply of M.S.Clamp,Nuts & Bolts etc. as required.

Supply of LT Stay insulator (Porcelin)

Supply of 8 mtrs length of PCC POLE complete in all respect.

Supply of M.S.Angle 50 x 50 x 6 mm for bracket

Supply of ring spanner set Taparia 1812 double sided combination wrench (pack of 12 nos)

Supply of adusjable spanners phosphate finish single sided open end wrench Taparia 1173 N-12

Supply of open end double sided wrench,Taparia DEP-12 (pack of 12 nos)

Supply of single end open spanner 38 mm -42 mm ,Taparia VTH

Carriage of 7.5mtrs / 8.0mtrs / 9.0mtrs length of Steel Tubular Poles by Mechanical Transport from the Electrical Site Store at AMBASA to working site at Badharghat Vis-a-vis, including loading, unloading and stacking as required upto the lead of 85 KM.

Carriage of materials such as Cable,AAC, AAAC, ACSR, G.I.Wire,Cross-Arm,Stay Set,Insulators etc., by Mechanical Transport from the MM Sub-Divisional Store to working site and from ESD to work site including loading, unloading and stacking as required, upto the lead of 25KM & 50KM.

TAPAN CHOUDHURY