PROVISION OF BOUNDRY WALL TO OFFICERS MESS 9 MAHAR BLDG NO T-26 (LENGTH 140 MTR), 02 x ATT TOILETS IN JCOs MESS OF 4/4 GR, LPG CYLINDER STORE NEAR BLDG NO P-95 OF 414 FD HOSP, DRAIN NEAR BLDG NO P-32 OF 447 ASC COY (SUP) TYPE G AND 250 DEFICIE

Amount

Surface excavation n exc 30cm deep averaging 15cm deep in any type of soil and getting out complete all as specified and directed.

Excavation in trenches n exc 1.5 mtr wide and n exc 1.5 mtr in depth for foundation etc, or for shafts, wells, cesspits manholes, pier holes etc. n exc 10 Sqm on plan and n exc. 1.5 mtr in depth and getting out in hard/dense soil complete all as specified.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base/ foundation filling / mass concrete complete all as specified.

M&L for brick work with subclass 'B' bricks, , straight or curved on plan exc 6 m mean radius built in cement mortar (1:6) complete all as specified. (using old size bricks)

M&L for brick work, straight or curved on plan to any radius and built in cement mortar (1:4) as in half brick thick wall complete all as specified and directed.

M & L 40mm thick PCC (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) as in damp proof course, finished even and fair using extra cement including necessary form work complete all as specified and directed.

M&L for RCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in fondations, including rafts, footings, foundation beams, plinth beams etc complete all as specified and directed.

M&L for RCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in columns, pillars, piers, posts and struts etc complete all as specified and directed.

M&L for RCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in beams, lintels over 1.5 metre span, beam, cantilevers complete all as specified and directed.

M&L for RCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns, in floors, roofs, landing balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

M&L for precast reinforced factory made heavy grade cover slabs 60-70 mm thick and size as per site requirement in cover slabs for manholes etc. and similar articles with plain faces including necessary forms, moulds as required, set in cement mortar (1:4) complete all as specified and directed. Make- NTC.

M&L for mild steel TMT bars 10 mm dia & over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia as specified .

M&L for mild steel TMT bar 8 mm dia cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia as in stirrups, spacers and binder complete all as specified and directed.

M&L for mild steel TMT bar 6-8 mm dia cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia as specified .

M&L for use and waste of form work to sides of fondations, including rafts, footings, foundation beams, plinth beams etc all as specified and directed.

M&L for use and waste of form work to sides of columns, pillars, piers, posts and struts squares,rectangular or polygonal all as specified and directed.

M&L for use and waste of form work to sides and soffits of floor or roof beams, lintels, cantilever, shelves for fair finished surfaces of concrete complete all as specified and directed.

M&L for use waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc 200mm thick (Horizontal or sloping) for fair finished flat surfaces of concrete complete all as specified and directed.

M&L for use waste of formwork to sides of roof slabs, floor slabs, landings and similar work, not exc 200mm wide (Horizontal or sloping) for fair finished flat surfaces of concrete complete all as specified and directed.

M&L for plastering 15 mm thick on brick or concrete surface in cement mortar (1:4) finished even & smooth complete all as specified and directed. Note : WPC will be measured and paid seperately under appropriate item of Sch 'A' if required.

M&L for plastering 15 mm thick on brick or concrete surface in cement mortar (1:6) finished even & smooth complete all as specified and directed.

M&L for plastering 10 mm thick on concrete surfaces of ceilings in cement mortar (1:3) finished even & smooth complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls/ ceiling and applying two coats of cement base paint of approved shade over a coat of primer suitable for cement base paint complete all as specified & directed The tint of cement base paint shall be approved by GE / Engineer-in-Charge. .

M&L for preparation of newly plastered wall surfaces and applying three coats of white wash, complete all as specified and directed.

M&L for preparation of newly plastered ceiling surfaces and applying three coats of white wash, complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper of any tint over a coat of primer, over and including applying wall putty 2 to 3 mm thick, and rubbing with sand paper to make the surface smooth, complete all as specifed. Tint of distemper shall be approved by GE / Engineer-in-charge.

M&L for 25 mm thick PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregated) as in sub base for lay floor finishes complete all as specified and directed.

M&L for 100 mm thick PCC (1:2:4) type B-2 (using 40mm graded crushed stone aggregated) as in sub base for lay floor finishes complete all as specified and directed.

M&L 75 mm thick PCC (1:4:8) type D-2 (using 40 mm graded crushed stone aggregate) as in sub base complete all as specified and as directed.

M&L for Sand filling under floors including watering and well ramming complete as specified and as directed. Note :- Only compacted thickness shall be measured.

M&L for red bajri/mooram in floors including watering and well ramming complete as specified and as directed. Note :- Only compacted thickness shall be measured.

M&L for coloured non skid ceramic joint free tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors, over and including 15 mm thick screed/bedding layer in CM (1:6) set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match complete all as specified and directed.

M&L for coloured glazed ceramic digital tiles in vertical surfaces of size 350x250x7mm thick/ 450x350x7mm thick over and including 10 mm thick rendering in CM (1:4) , set and jointed in neat cement slurry and pointed in white cement mixed with coloured pigment to match complete all as specified and directed by Engr-in-Charge.

M&L for coloured non skid ceramic joint free tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm , in floors, over and including 15 mm thick screed/bedding layer in CM (1:6) set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match complete all as specified and directed.

M&L for coloured non skid ceramic joint free tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm , in skirting/dado, over and including 10 mm thick screed/bedding layer in CM (1:4) set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match complete all as specified and directed.

M&L for hard core of broken boulders of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc. 15cm thick, watered and well rammed to a true surface complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 (using 40mm graded stone aggreate), 75 mm thick as in plinth protection, finishing the surface even & fair without using extra cement the plinth protection shall be laid in alternate bays n exe 2 Sqm, 10mm joints shall be provided, joints shall be filled with bitumen mastic, bitumen mastic comprise of 1 Part of Hot bitumen 85/25 grade and 3 parts of sand all by weight complete all as specified & directed of concrete complete.

S&F vitreous china water closet (squatt pan) orrisa pattern 580x440 mm, white, with front or back inlet with integral 'foot rests including 100mm CI 'P' trap and provn of concrete bedding including connections to soil pipe complete all as specified and directed.

S&F vitreous china wash down water closet pan (Padestal pattern) white closed pattern with flat bottom with mild steel chromium plated or aluminium anodised hinging device complete all as specified and directed.

S&F PVC valve less, syphonic action type low level flushing cistern 10 ltr capacity, white with inlet ball valve , float handle , PVC flush pipe including brackets complete all as specified .

M&L cutting chases, pinning in, making good to facing where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing and making good cutting not exc 10cm girth complete all as specified and directed.

All as per item No 41.00 here in above but exc 10cm and n. exc 20cm girth

S&F galvanised steel water tubing 15 mm bore medium grade (ISI marked) with all fittings fixed to wall or laid in floors complete all as specified and directed.

S&F galvanised steel water tubing 20 mm bore medium grade (ISI marked) with all fittings fixed to wall or laid in floors complete all as specified and directed.

S&F galvanised steel water tubing 25 mm bore medium grade (ISI marked) with all fittings fixed to wall or laid in floors or in trenches complete all as specified and directed.

S&F vitreous china wash hand basin including brackets, white, flat back size 580x450mm, padestal pattern incl cutting for and pinning in ends of brackets. Including waste fittings, brass chromium plated with long screwed shanks and fly-nuts, flange end bedded in red lead cement including 32 mm PVC waste pipe complete all as specified. Make- Hindware cat pt No- 10086/ Parryware cat pt No- 484& 377/ Jaquar cat pt No- CNS-WHT-801 & CNS-WHf 301.

S&F of brass Tee 20 mm dia for CPVC pipe fittings complete all as specified.

S&F of brass Elbow 20 mm dia for CPVC pipe complete all as specified.

S&F vitreous china corner type wash hand basin including brackets, white, including cutting for and pinning in ends of brackets. Including waste fittings, brass chromium plated with long screwed shanks and fly-nuts, flange end bedded in red lead cement complete all as specified. Make:- CERA; ASIN B07Px34V94X350 Cat No 10055(classic corner) / Parryware 415x415x150mm Alcove C0467 / Jaquar 330x455x165mm JDS WHT - 25841.

S&F CP bottle trap with wall connection pipe & wall flange complete all as specified. Make:- CERA F8060401 / Parryware T3201A1 / Hindware F850015

S&F Pillar taps 15mm bore cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed to iron pipe & fixed complete all as specified and directed. Make- Hindware cat pt No- F370001/ Parryware cat pt No- G9802A1/ Jaquar cat pt No- VGP 81001.

S&F PVC connection 15mm size with PTMT nuts, of 450 mm length complete all as specified.

S&F PTMT towel rail, 45 cm long fixed on wall with chromium plated screws and rawl plug complete all as specified and directed.

S&F sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracked guard and railing 60 cm long fixed to rawl plugs with chromium plated brass screws & washers complete all as specified and directed. Make- Hindware cat pt No- F870011/ Parryware cat pt No- T6703A1/ Prayag cat pt No- BTA-45.

S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms)

S&F Grating doom 125mm dia of PTMT (Minimum weight 40gms)

S&F Bib tap, fancy type, long body, brass chromium plated, with wall cap, round headed knob, screwed for 15mm bore iron pipe complete all as specified. Make- Hindware cat pt No- F-370004/ Parryware cat pt No- s-9906/ Jaquar cat pt No-ALI- 85037.

S&F Angle valve, brass chromium plated, fancy type, with wall cap with round headed knob with wall cap suitable for 15mm bore iron pipe complete all as specified. Make- Hindware cat pt No- 160017/ Prayag cat pt No- 9410/ Jaquar cat pt No- FON-40053.

S&F 75mm dia PVC (SWR) floor trap with grating including jointing to waste pipe fixed in cement concrete type B 1(1:2:4) complete all as specified and directed.

S&F PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed.

S&F PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S&F PVC (SWR) pipes 75 mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floor.

S&F 75 mm PVC (SWR) bends any radius with acess door complete all as specified and directed.

S&F 100 mm PVC (SWR) bends any radius with acess door complete all as specified and directed.

S&F PVC (SWR) junction 110 mm bore single (single T) equal or unequal complete all as specified and directed.

S&F 110mm PVC (SWR) vent cowls.

M&Lfor salt glazed stone ware gully traps square or rounded mouthed type ‘P’ of size 150x150mm embedded in PCC with necessary brick work . plastering etc complete and connecting to pipe all as directed by Engineer-in-charge.

M&L prepolished chequered cement concrete coloured tiles glossy finish of size 300 x 300 x 20-22 mm thick, over and including 15 mm thick screed/bedding layer in CM (1:6), set jointed and pointed in neat cement slurry with grey cement and pigment complete all as specified and directed.

M&L for 20-25 mm thick machine cut kota stone slab of as in flooring edge cut, one colour, over & including 20mm thick screed/bedding layer in CM (1:6), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed.

M&L for machine cut Kota stone slab 15 to 18 mm thick, as on vertical surfaces such as riser of steps, skirting, dado etc. over & including 15mm thick rendering in CM (1:4), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

S&F Granite stone 16 to 18mm thick (table rubbed & polished) in steps, jambs, wall clading, pillars, window cills, cooking platforms & like including 20mm thick in screed bed in cement mortar (1:4) including pointing into white cement (1:2) using marble dust with admixture of pigment to match shade of granite and rounding off exposed edges complete all as specified and directed.

S&F mild steel work as in hand rails, half round or other steel section drilled and countersunk for ballusters running bars for doors etc includind embadding in concrete, winr ties for roof including securing bolts, posts, struts, in fencing incl cutting tops as directed, drilling holes, notching for wires, and similar items conforming to Fe-290 Gde-E-165.

S&F framed work as in doors and gate of angle and other section with gusset plate, rails, braces etc and other similar works and prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) conforming to Fe-410 W Gde E-250 quality 'A'

S&F mild steel framed work such as grills, gratings etc, with ends of bars shouldered and /or riveted, or forged into pikes, framed guard bars, barred iron doors, ladders, framed balsters, walk ways, railing, frame work of water tanks and similar work conforming to Fe- 290 Gde E-165 complete all as specified and directed.

S&F for 35mm thick flush shutters, solid core construction with block board core and plywood face panel and commercial type on both side, including provision of block suitable for taking mortice lock, latches and other fitting complete all as specified and directed.

S&F mild steel butt hinges cold rolled medium weight 100mm size complete alla specified and directed.

S&F alluminium anodized handle, fabricated type, ISI marked complete all as specified of size150mm.

S&F 300mm long Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F 300 mm long mild steel sliding door bolt, bolt type with bright bolt not less than, 12 mm dia with an including 6 bolts and nuts four on bolt plate and two on staple plate, complete all as specified and directed.

S&F 150 mm long,aluminium,anodised, barrel tower bolts of extruded section ISI marked complete all as specified and directed.

S&F pre laminated Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam single piece extruded pvc profile and edgs will be painted to match with prelam sheet , PVC sheet are to be reinforced with 19x19mm MS square tube EPDM rubber gasket weather seal shall be provided through out the frame. The profile shall be mitre cut at two corners and joint by insrting 2 nos of 150mm long backets of 15mmx15mm MS square tube inside the 19mmx19mm MS square tube and suitably screwed and fixing in opening as per specification & drawing.

S&F Factory made moulded PVC door shutter with wood free EPS, 28 to 30 mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm prelam PVC sheet on back face, supplying & fixing in frame at site as per specification and drawing.

S&F factory fabricated steel windows with side hung shutters including box type hinges with steel handles, steel peg stays complete with glazing bars dovetailed or welded complete all as specified and directed.

S&F factory fabricated steel windows with side hung shutters including dovetailed or welded box type hinges with MS handles without glazing bars, complete all as specified and directed.

S&F factory fabricated steel windows or ventilators with top hung shutter including box type hinges, steel peg stay complete all as specified.

S&F factory fabricated steel windows or ventilators fixed type with glazing bars complete all as specified.

M&L sheet glass ordinary quality 4 mm thick, glazing with oil putty with glazing pins in squares n.exc 0.50 sqm each pane complete all as specified and directed.

M&L sheet glass frosted ordinary quality 4 mm thick, glazing with oil putty with glazing pins in squares n.exc 0.50 sqm each pane complete all as specified and directed.

S&F stainlesssteel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples all as directed by Engineer- in -Charge.

M&L for preparation of new or previously untreated wood and wood based surfaces of any description of over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer complete all as specified and directed.

S&F rotational moulded polyethylene 500 Ltrs Capacity water storage tanks three layered (external white) (ISI marked) (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball valve PTMT 20 mm dia, with polythelene float and fly nut including 20mm dia GI medium grade over flow pipe , approx lenght 1.5 mtr, 25 mm dia wash out pipe with pluged at one end complete all as specified and directed .

S&F rotational moulded polyethylene 1000 Ltrs Capacity water storage tanks three layered (external white) (ISI marked) (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball valve PTMT 20 mm dia, with polythelene float and fly nut including 20mm dia GI medium grade over flow pipe , approx lenght 1.5 mtr, 25 mm dia wash out pipe with pluged at one end complete all as specified and directed .

S&F gun metal globe or gate valve, with iron wheel suitable for 20mm bore iron pipe complete all as specified.

S&F repair 25 mm dia stainless steel drapery rod with wooden finish, decorative, including brackets, decorative finials at both ends & curtain rings 8 Nos (minimum) complete all as speccified and directed.

S&F Salt glazed stone ware pipe conforming to IS 651-1972 grade 'A' in trenches and jointed in cement mortar (1:1) 150mm internal dia of pipes complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 ( using 40 mm graded stone aggregate) as in conrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and directed complete.

M&L for treatment of back fill in contact with foundation using antitermite emulsion @ 7.5 litre per square metre complete all as specified.

M&L for treatment of top of filled earth using antitermite emulsion @ 5 litre per square metre complete all as specified.

M&L for treatment of soil under plinth protection using antitermite emulsion @ 5 litre per square metre complete all as specified.

M&L for treatment of soil along external perimetre of building using antitermite chemical emulsion at the rate of 2.25 ltrs per linear metre of wall complete all as specified.

Returning filling in, including spreading, leveling and watering, well ramming n.exc 25cm thick layer in soft/loose soil complete all as specified and directed.

Removing excavated material (Soils) to a distance not exceeding 50 mtr and depositing where directed at a level n.exc. 1.5 mtr above the starting point complete all as specified and directed.

Removing excavated material (Soils) to a distance exceeding 250 mtr but not exceeding 500 mtr and depositing where directed at a level n.exc. 1.5 mtr above the starting point complete all as specified and directed.

M&L for water proofing treatment on roof slab including picking, sweeping clean and washing down with water to remove dust & providing water proofing treatment described as under:- (a) Surface preparation and treating of construction joints, filling of honey combs with polymer modified mortar (Cement: Sand : smart care multipurpose polymer of Asian Paints or equivalent product of Thermax/ Berger ) (b) Providing PCC (1:2:4) type B-0, 25mm thick screed bed or bedding layer over roof surface .

Item No 106.00 contd. (c) Cleaning the surface and applying (Resin & Hardner) smart care Epoxy Primer 2k of Make Asian paints or equivalent product of Thermax/ Berger ) on the cleaned surface for bonding of PU magnum with the existing concrete surface. (d) Supplying, providing and applying waterproofing treatment to Terrace area with Asian Paints Smart care PU magnum, single component highly elastomeric seamless cold applied modified PU coating or equivalent product of Thermax/ Berger) including all necessary surface preparation, coving using smart care multipurpose polymer, water pond test, etc. complete as per manufacture's specifications and application methodology. The same coating shall be applied in two coats achieving a total thickness of 1mm. The coating shall have dual combination of 250% elongation . Execution to be done with authorised applicator of the manufacturer. Work will be executed in smart assurance system..

Supply only liquid water proofing compound Dr Fixit/sika/forsoc complete all as specified and directed.

S&F galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with, 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed. (Note:- Each line of horizontal/ vertical/ diagonal wire to be measured for the purpose of payment)

M & L for cement concrete ( 1:3:6 ) type C1 (using 20 mm graded stone aggregate) as in surface channels and drains and benching including finishing the top of benching even and smooth using extra cement and necessary form work, complete.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for soakwell 1.8m dia x 3.00m deep with brick construction complete all as specified and as shown on drawings.

Excavation in trenches n exc 1.5 mtr wide and n exc 1.5 mtr in depth for foundation etc, or for shafts, wells, cesspits manholes, pier holes etc. n exc 10 Sqm on plan and n exc. 1.5 mtr in depth and getting out in soft/loose soil complete all as specified.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar works complete all as specified ad directed.

M&L for 40mm thick Plain Cement concrete (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) as in floor finishing etc complete all as specified and as directed.

S&F 4.8 mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane with four corner sealed with silicon complete all as specified and directed.

S&F Plastic water closet seat, white, closed pattern with flat bottom & cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed. Make- parryware cat pt No-E-8086 or equivalent make approved by GE.

S&F Pop up waste coupling of PTMT (half or full threaded, min weight 32 to 45 gms) complete all as specified and directed.

M&L 32mm bore waste pipe PVC for wash hand basins, 90 cm long with coupler complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) as in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, copings, bed plates and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) as in parapets and railings upto 60 cm height, copings, apex stones, bed plates etc including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work complete all as specified and directed.

M&L for Point wiring with1100 Volts, grade 1.5 Sqmm. (nominal area) ,PVC insulated but unsheathed multistranded copper conductor single core FRLS cable drawn through and including non metallic medium duty rigid PVC concealed conduit (medium duty) 20mm dia or higher size complete with all accessories such as socket, elbow, junction box, bell mouth, bend, reducer etc including pressed iron/steel suction box of thickness1.2mm for mounting of switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet as top cover, and 1.5 Sqmm. (nominal area) single core FRLS,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable green colour as earth wire upto common earth and connected to earth dolly complete all as specified and directed by Engr.-in-charge of following. Note:- Wire/cable colour coding shall be maintained properly as per IE rule. The make of conduit & its accessories should be Precision/Polycab/AKG/Modi. The make of wire should be Havells/KEI/Finolex/L&T

One light/ fan point controlled by one-one way switch.

One three pin 5 Amp socket on same board with other switches.

One three pin 5 Amp socket on independent board.

All as per item No.121.00 above but with 2.5 Sqmm. (nominal area) wire/cable for phase and neutral for one 3 Pin 15 amp socket on independent board including one 2.5 sqmm PVC insulated unsheathed multi stranded copper conductor cable, FRLS 1100 volts grade as earth continuity conductor upto common earth & connected to earth dolly complete all as specified and directed by Eng.-in-charge.

M&L sub main wiring with 2 Single core FRLS PVC insulated unsheathed cable 1100 Volts grade heavy duty copper conductor multistranded of size 4 Sqmm (nominal area) drawing in and including 20 mm dia medium duty PVC concealed conduit and conduit accessories and fittings including one single core green colour FRLS, PVC. Insulated unsheathed multi stranded copper conductor cable of size 4 Sqmm as earth continuity conductor upto common earth and connected to earth dolly complete all as specified & directed. (Note: Two run 4 Sqmm cable and one run 4Sqmm cable and one run conduit shall be measured as one run.)

S&F switch piano flush, type 5 Amp SP 250 Volt AC complete all as specified & directed. Make : Legrand/Siemens/ABB as approved by GE.

S&F switch piano flush type 15 Amps SP 250 Volt AC complete all as specified & directed. Make : Legrand/Siemens/ABB as approved by GE

S&F socket outlet multipurpose 3 Pin 5 Amp and 2 Pin 5 Amps 250 V AC complete all as specified & directed. Make : Legrand/Siemens/ABB as approved by GE

S&F socket outlet 2-in1,3 pin 5 and 15 Amp flush type 250V AC complete all as specified & directed. Make : Legrand/Siemens/ABB as approved by GE

S&F ceiling rose surface bakelite 3 terminals of size 65x25mm. complete . Make : Legrand/Siemens/ ABB.as approved by GE.

S&F sheet metal enclosures 240 volt with 200 Amp rated bus bar double door SPN 8 way IP-43DB's lk-09suitable for one MCB SPN as incoming and 6 MCB SP as out going, mounting flush on wall and making good disturbed surfaces complete all as specified and directed by Engr-in-charge. (MCBs shall be measured and paid separately).

S&F, MCB SP 6 to 32 Amp, 240 Volts, 'B' curve having breaking capacity 10 KA. Make : Legrand/ Siemens/ABB as approved by GE.

S&F, MCB SPN 40 Amps 'B' curve 240 Volts having braking capacity 10 KA. Make : Legrand/ Siemens/ABB as approved by GE.

S&F lamp holder PVC/polycarbonate type suitable for concealed wiring complete all as specified & directed.

S&F wall mounted tube light fitting 1x20/22 watts extruded aluminium polycarbonate diffuser PF 0.9 and above operating voltage 140V-270V colour temp 6500K & lumen input output 95 Lumen per watt and connected to ceiling rose with required length of two core flexible copper cable 23/0.0076 fixed on wall/roof complete all as specified and directed. Make: Philips Smart Bright or Crompton LDLB-20-CDL/ WIPRO TRMLD.

S&F of energy saving bulk head luminaire with opal diffuser with and including retrofit LED lamp 10 watt complete all as specified and directed by Engr-in-Charge. Make: CG Cat LBHP-10-CDL/ Philips WT 140W LED7S CW PSU S1 PC/ Havells ENDURA RUGBYNEO/ Mepro Cat No BCL 23 Plain.

Material and labour for earthing complete with galvanized steel plate electrodes of size 600mm x 600mm x 6mm thick buried directly in ground with earth pit not less than 2.25m deep below normal ground level with top edge of plate not less than 1.5 m below normal ground level connected to galvanized wire 4 mm dia as earth lead by means of nuts bolts check nuts GI washers earth wire protected by galvanized iron pipe 15 mm bore (light grade) including concrete pit in PCC (1:3:6) type CI, precast RCC cover slab of size 30x30x10 cm with one handle for lifting made out of 8 mm dia MS bar funnel wire mesh 20 mm bore galvanized iron pipe (medium grade) for watering charcoal or coke and salt in alternate layers necessary earth work in soft/loose soil complete all as shown in electrical plate No 5 of SSR part 1 including testing on completion all as specified and directed.

Note for Item No- 135.00 :-. The unit rate includes for protection GI pipe 15 mm dia light grade and GI wire 4 mm dia from top of earth plate up to 7.5 meter above ground level.

Supply & fixing vibration free exhaust fan AC single phase 230/240V of size 300mm sweep double ball 900RPM with louvers making necessary fixing arrangements on wall with hold fasteners 4 Nos nut bolts connecting with three core flexible copper conductor cable (23/0.0060) from ceiling rose complete all as specified and directed. Make. Orient/ Havells/CG.

Supply, laying & testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminiium conductor, 1100 volts cross sectional area 16 sq. mm 4 Core all as directed incl lugs thimbles and gun metal cable glands and heat shrinkable PVC sleeves on exposed surfaces and tuflon tape duly insulated complete all as specified and directed.

Supply & Fixing geyser of capacity 25 ltrs, having stainless steel storage tank of capacity 25 litre, rock wool insulation, thermostat, system on/ off indicator lamp, safety valve, pressure release valve, five star rating, ISI marked, including intel/out let connection with PVC connection Nylone braided PVC pipe 2 Nos suitable for hot or cold water, connected to water supply line with metal plug top , including grouting of four Nos holdfastners of suitable size for fixing the geyser and making good disturbed surface to match with existing surface all complete including water supply connections and connected to existing socket complete all as specified and directed by Engineer-in-charge. Make : Racold/Crompton/AO Smith/ Orient/Jaquar.

Supply & laying Sand coarse dry as in cushioning of underground electric cable in trenches, laid to a uniform thickness of 23cm (15cm under the cable & 8cm over the cable) and gently punned down to 18cm thickness all complete as specified and as directed. Note :- Only punned down sand shall be measured.

M&L for Sub class 'B' bricks laid dry width wise across the line of cable in treanchs as cable protection complete all as specified and directed by engr in charge.

M&L 40 mm bore steel tubing light grade ISI marked for protection of cable including necessary joint in replacement complete all as specified and as directed.

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB upto 25 Amps, SP 240 Volt 'C' series , 10KA, mounted on Din rail channel and suitalbe plug top complete all as specified and directed.

Supply & fixing ceiling fans complete with blades , 230 volts, 1200 mm sweep, white/brown/ ivery in colour, BEE 5 star rated with making necessary fixing arrangements,three core flexible copper conductor cable (23/0.0060) from ceiling rose complete all as specified and directed. Make. Orient/ Havells/Usha as approved by GE.

M&L for Point wiring using approved colour coding as per IS with zero halogen flame retardant (HEER) smoke free non toxic non corrosive installation copper cable with 1.5 Sqmm (nominal area) single core insulated and usheathed stranded cable 1100 V grade ISI marked in and incl heavy duty electric resistance wleded (ERW)stove enameled surface mounted conduit heavy duty ISI marked for two light points control by one flame proof switch, incl HFFR insulated unsheathed copper conductor 1.5 Sqmm nominal cross section area wire as earth continuity conductor upto common earth and connecting to earth dolly complete all as specified and directed by Engr-In-charge. Note:- (i)All condiut accessories such as bends, elbows, tee etc shall be flame proof. (ii) The make of wire should be Finolex/Polycab/Havells/L&T. (iii) Switches to be measured and paid separately.

S&F flame proof switch rotary type with termination box in LM6, 16 Amp, single pole, 250 V complete all as specified & directed. Make: Sudhir & equivalent

S&F LED flame proof well glass fittings comprising of dia cast aluminium housing with heat resistant toughened glass/dome glass/external reflector, IP 65 protection complete all as specified and directed. Make Crompton cat part No IBFN100-15-CDL equivalent in Bajaj/Sudhir

S&F sheet metal enclosures double door distribution board 240 volt 4 way IP-43 DB's suitable for one MCB SPN 01 No and MCB 6 Amp 2 Nos mounting concealed in wall and making good disturbed surfaces complete all as specified and directed by Engr-in-charge Make: Legrand/HPL/ABB

S&F MCB, DP, B Curve, 10 KA, 20 Amp 230 Volt AC conforming to IS complete all as specified & directed. Make: Legrand/ABB/Simens

S&F MCB, DP, B Curve, 10 KA, 6 Amp 230 Volt AC conforming to IS complete all as specified & directed. Make: Legrand/ABB/Simens

M&L for earthing with Copper electrode chemical advance maintenancefree chemical gel earthing electrode 50mm dia thick buried directly in ground vertically to a depth not less than 2.10 mtr below ground level filled with highly conductive metalic compound mixture CCM with the permanent sealing of the both end, outer dia pipe 50mm with strip terminal 50x6 with terminal holes incl one bag 25 kg of bfc compound, earth connected with earth lead GI wire 4.00 mm dia by means of bolts, Nuts, Check Nuts and washers of galvanized iron and thimbles and other end of the earth wire connected to main switch board protected by galvanized iron pipe medium 15 mm bore, with PCC chamber in cement concrete 1:3:6 type C-2 & 75 mm thick RCC (1:2:4) type B1 cover slab reinforced with 8mm TMT bars 100mm c/c both ways complete all as specified & shown in elect plate No. 3 of SSR part I of 2009 or PVC chamber as per manufacturer instruction and testing on completion. Note: (i) Earthing has to done by CPRI approved firm and if the desired earth resistance is not found within permissible limit shall be redone by contractor at no extra cost. (ii) Cost of GI wire 4 sqmm and 15 mm dia pipe medium grade upto 7.5 mtr is included in the rate quoted for this item

Supply and laying XLPE insulated, armoured, heavy duty electric cable, with stranded aluminum conductor served with an inner sheathing of PVC tape armoured with galvanized steel wire or tape and overall PVC sheathed 1100 Volts grade, nominal cross sectional area 6 Sqmm 2 core laid in trenches, ducts, drawn through pipes across the road/path/along poles/wall/ floors/ equipment etc including jointing and testing including all bare conductor duly insulated with heat shrinkable sleeves / Taflon tape complete all as specified and directed by the Engr-in-Charge. Make of Cable : KEI/Havells/Finolex/grandlay

PAWAN KUMAR

MOHAN LAL GUPTA

M/S SURAT SINGH AND SONS

Arun Construction Co.