LT OH Reconductoring work using ABC Boat palam Transformer area under Electrical Section Azhikode

Renewal of existing damaged/broken old LT stay in existing stay rod.

Transporting LT ABC by hired vehicle to a distance up to 5 km and carring up to 2 drum including loading and un loading using crane

Stringing of 1.1 kV Aerial bunched cable of size 3 x 70 + 1 x 16+1x 50 sqmm with bare/insulated Messenger through existing poles

Stringing of 1.1 kV Aerial bunched cable of size 3 x 50 + 1 x 35 + 1 x 16 sqmm with bare/insulated Messenger through existing poles

Erection of Anchor clamp / dead end clamp for LT ABC of any size

Erection of suspension clamp for LT ABC of any size

Additional rate for excavation of one Earth Pit (2.5m depth) in Hard Laterite.

Additional rate for excavation of one Earth Pit (2.5m depth) in Laterite.

Installing One No. Insulation piercing connector of size Main :16 to 95 ,Tap:1.5 to 16 Sq.mm

Installing One No. 4 way Satellite Connector of size Main :16 to 95, Tap:4 to 35 Sq.mm to the LT AB cable of Standard size

Providing End Caps

Dismantling (without damage) one km LT three phase 4 wire OH line conductor by dismantling cross arms, insulators and stacking the conductors in rolls properly.

Dismantling (without damage) one km LT single phase 2 wire OH line conductor by dismantling cross arms, insulators and stacking the conductors in rolls properly.

Dismantling (without damage) one km LT additional conductor line by dismantling cross arms, insulators and stacking the conductors in rolls properly.

Disconnecting and lowering down the single phase WP service connection with guy wire from the OH line and reconnecting the same after completing the line work.

Disconnecting and lowering down the three phase WP service connection with guy wire from the OH line and reconnecting the same after completing the line work.

Fitting one No. Section fuse on LT line with dropping cables, crimping sockets, connecting with bolt & nut etc.

Providing one Earth using GI earth pipe of size 38.1mm dia, 2.5m length including digging separate pit (0.45x0.45x2.5m) at a minimum distance of 1.5m away from the pole/structure and maintaining standard distance between different earth pipes in ordinary soil & backfilling.

Installation of Insulation piercing connector for main to service line main :16-95 sqmm, Tap 16-95 sqmm

Labour charges for loading LT PSC pole from the stacking place and unloading the same at work site (transportation by any vehicle).

Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 numbers of poles excluding loading& unloading charges.

Dismantling (without damage) one LT PSC/RCC pole after disconnecting stays, strut etc. attached thereon and stacking the same.

Dismantling one damaged LT PSC/RCC pole after disconnecting stays, strut etc. attached thereon and stacking the same.

Providing Strut using LT PSC pole including digging and back filling pit in ordinary soil.

Straightening one slanted LT pole after unbinding the line and binding the line after work.

Dismantling one ordinary street light/CFL/LED fitting from existing pole and refitting the same on newly erected pole including disconnecting and reconnecting wires.

Providing Stay for LT poles including digging & back filling pit in ordinary soil.

Additional rate for excavation of one Pit for LT Pole/LT Stay in Laterite.

Additional rate for excavation of one Pit for LT Pole/LT Stay in Hard Laterite.

Providing WP support with PSC pole including digging & back filling pit in ordinary soil. excluding transportation of poles.

Labour charges for loading HT PSC pole from the stacking place and unloading the same at work site (transportation by any vehicle).

Insertion of one HT PSC pole in existing HT/LT line including digging & back filling of pit in ordinary soil, fitting cross arm, insulator, binding etc. , drawing sufficient length of GI earth leads to the ground for earthing (excluding provision of earthing).

Additional rate for excavation of one Pit for HT Pole/HT Stay in Laterite.