Loading…
Loading…
Tender Value
₹4.2 Cr
EMD Value
₹4.2 L
Closing Date
5 Sept 2026, 6:00 pm
Executive Engineer, Anand Irrigation Division Anand.
Modernization of Petlad Branch by Providing C.C Lining Between Ch.39040 Mt to 43080 Mt of Under jurdiction of Anand Irrigation Sub Division,Anand
331384
08 of 2026-2027
Open
Miscellaneous Works
Turn-key
Anand
13 documents required · 12 mandatory · 1 optional
₹6,000
Executive Engineer Anand Irrigation Division Anand
₹4.2 L
6 Aug 2026
6 Aug 2026
6 Aug 2026
5 Sept 2026
6 Aug 2026
Bill Of Quantities
Name of work :- Modernization of Petlad Branch by Providing C.C
Lining Between Ch.39040 Mt to 43080 Mt of
Under jurdiction of Anand Irrigation Sub
Division,Anand (Package No-7)
Total Amount Without
Total Amount Without
Sr.No Item Quntity Unit Rate without
Clearing the shrubs, like akadas, weeds
and other vegetables including depositing
the same outside and burning etc. complete
from canal beds and both slopes of the
banks, for canal with discharge. For Canals
Above - 250 Cusecs.
Clearing the silt from the CANAL BED /
SLOPE by digging the same to the required
bed level and gradient including depositing
the excavated earth regularly in spoil bank
for utilizing the same preparing the banks
after breaking clods as and where directed
for lead upto 50 m. and all lifts. (BY
Dismentalling the brick pitching including
sorting out and stacking of the usefull
3 materials on site including removing the 7628.00 Sqmt 69.30
rubbish etc. complete as directed. - 12 cm
Dismantling the existing brick masonry
including sorting out and stacking the
useful material and removing the debries
4 and making good the damages etc. complete 367.00 Cum 750.90
as directed. In Cement Mortar
Earth work in embankment using selected
soil, soft & hard murrum excavated from
approved borrow area / village tanks etc.
Including conveying, spreading in uniform
layers, breaking clods and dressing to the
5 designed canal section etc. with lead upto 946.00 Cum 77.20
500 m and all lift .(For canals having
capacity beyond 300 Cusec) ( By
Total Amount Without
Total Amount Without
Sr.No Item Quntity Unit Rate without
Compaction for making embankment for
canal by laying in regular layers of 15 cm in
thickness including breaking clods to
mm size incl. light rolling by suitable rollers
with slight watering to facilate rolling and
dressing the side slopes etc.
Providing and laying plain/reinforced
cement concrete lining of M 15 (MSA
mm) in bed, side slopes and curvature
including batching, mixing, transporting,
placing, vibrating, smooth finishing, curing
including dewatering where required.
(MACHINERY BASED by "BATCH MIX
7 PLANT & TRANSIT MIXER" - WITH PAVER 36829.00 Sqmt 365.80
WATER CURING ) 7.5 cm thick lining in
Bed/slope - with water curing, Machinery
based with Paver
Providing and laying plain/reinforced
cement concrete lining of M 15 (MSA
mm) in bed, side slopes and curvature
including batching, mixing, transporting,
placing, vibrating, smooth finishing, curing
including dewatering where required.
((MACHINERY BASED By Batchmix Plant &
Transit Mixer - WITH PAVER MEMBRANE
CURING) 7.5 cm thick lining in Bed/slope -
with membrane curing, Machinery based
Providing groove and filling expansion joint
of size 12 mm wide and 25 mm deep in
canal lining during construction with two
coats of primer and filled with bituminious
and fine sand in proportion of 2:1, as
directed etc. complete.
Total Amount Without
Total Amount Without
Sr.No Item Quntity Unit Rate without
Excavation for foundation in all sorts of soil
including yellow sandy gravelly soils ,soft &
hard murrum etc. in dry condition
including depositing the excavated stuff in
uniform layers in banks or as and where
10 directed etc. complete for lead upto 500 m 755.40 Cum 102.40
and all lift. (BY MACHINERY)Excluding
Providing & Laying in position with Batch
Mix Plant & Transit Mixer "DESIGN MIX"
cement concrete using cement sand and
crushed aggregate for C.C./ R.C.C work
including necessary formwork, centering,
scaffolding, compaction by vibrator, curing
as directed with all lead & lift etc complete
without dewatering and excluding the cost
of steel reinforcement.(B) For Pier and
Abutments / Wing wall / Head wall /
Return wall / Dowel wall etc. (g) Concrete
grade M-15 and MSA-20 mm
Providing videography on the ocassion of
function or for ongoing construction work
12 including dubbing, titeling etc.complete 1.00 Job 4000.00
including cost of cassette/CD (a) For whole
Providing & Laying in position "NOMINAL
MIX" cement concrete using cement, sand
and crushed aggregate by mass and
machine mix for C.C./R.C.C work incl.
necessary formworks centering, scaffolding,
compaction by vibrator, curing as directed
with all lead & lift etc complete Without
13 Dewatering and excluding cost of steel 4.20 Cum 3935.00
reinforcement. (A) For Foundation concrete
/ General purpose (a) C. C. Nominal Mix,
M-15 and MSA-20 mm
Total Amount Without
Total Amount Without
Sr.No Item Quntity Unit Rate without
Providing and laying burnt brick masonary
in foundation ordinary portland cement
mortar 1:5 proportion including, curing
etc. complete for all leads and lifts.
Providing cement plaster in thickness and
proportion as under including, smooth
15 finishing, curing, scaffolding etc. complete 39.10 Sqmt 193.20
for all leads and lifts.
Providing and fixing in position ( different
diameter ) NP2 R.C.C. pipe with collar
including filling and caulking the joints with
cement mortar 1:1 proportion, finishing to
16 design grade and level curing etc. complete 16.00 Meter 635.70
for all leads and lifts.300 mm dia NP-2 Pipe
New/Reparing of steel gate including
providing basic stell materia; M.S. Shaft
plate, angles, channels etc. incl. fabriction
transporting to site & Erection and painting
Providing and fixing the iron rod for steel
gates including providing big size thread
18 and finishing as required etc comp.(a) - dia 2.40 Meter 1268.50
of bar 38 mm rod for 1 Rmt length.
Providing and fixing heavy duty CI nut for
steel gates as directed etc complete.
(a)- for 38 mm dia rod and height of nut is
Total Amount Without
Total Amount Without
Sr.No Item Quntity Unit Rate without
Providing and fixing heavy duty thrust
beareing for 38mm dia rod length. Height of
20 Nut is 120x120x100 cutting 2.00 No. 800.00
Total Rs…(Without GST)
Rs. Four Crore Twenty Two Lac Twenty Nine Thousand Three Hundred Fifty Seven & Fifty Five Paise
I / We am / are willing to carry out the work at………………..% above / below precent.
(Should be written in figure and words) of the estimate reates mentioned above.
Amount of my / our tender works out as under.
Estimated amount put Estimated amout put
to tender Rs……………. to tender Rs……………..
Deduct …………..% Add………………%
below Rs………… Above Rs……………
Net Rs……………….. Total Rs…………….
In words…………………………….. In words………………
Notes 1 -The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-
Charge for which no extra payment shall be made.
Notes 2 - The labour cess will be deducted as per prevailing rules i.e.1% of the work done.
Notes 3 - GST and Income tax TDS will be deducted at a source while making payments of bills
Note 4 - In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt.G.R.:PRC-
10/2017CementConsumption/16/CDate:11/05/2017asstated in
S.O.R. there fore in R.C.C. items where there is a change as per actual mix design the cost
of difference of cement consumption have been deducted from the rate of original item at the rate of input rate mentioned
in all the tender.
Deputy Executive Engineer
Anand Irrigation Sub Division
Executive Engineer
Anand Irrigation Division
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
tender notice 8 0f 2026 27.pdf
1 Front Page.- Pkg-7 39040-43080.pdf
2.1 Certificate Pkg-7 39040-43080.pdf
2.2 Certificate Pkg-7 39040-43080.pdf
3 Notice Inviting online Tender Pkg-7 39040-43080.pdf
4 SBD-Documen without PQ Pkg-7 39040-43080.pdf
5 1 BOQ-Pkg-7 39040-43080.pdf
5 2 BOQ-Pkg-7 39040-43080.pdf
6 General item wise specification Pkg-7 39040-43080.pdf
7 Testing Norms Pkg-6 35000-39040.pdf
8 Drawing PB 39040-43080 mt.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].