Up-gradation of PHC to Urban Polyclinic at Pinjore in Panchkula Distt. (Pdg. Internal EI) (Recall).

Amount

( a ) Main Switches Supply and erection of metal clad switches / B.D.Bs with rag bolts on wall or on existing angle iron board / pedestal including bonding to earth and necessary connections . Four pole change over switch 100 Amp.. 415 Volts, HRS No. 31.12(a) (xxv) Cat-B

( c ) Moulded case Circuit breakers. Supply and erection of moulded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections. 100 Amp..to 220 Amp..415 V,10 KA 3-phase. HRS No. 31.12 c (ii)

Supply and erection of M.S. angle iron frame duly welded for housing M.S. sheet & main switches etc. on it, fixed on wall by means of suiteble size of rag bolts with cement concrete ,duly painted with three coats of approved paint including one coat of red oxide. Size 40 mm x 40 mm x 6 mm. HRS No. 31.13(ii)

M.S.Sheet . Supply and erection of 3 mm thick mild steel sheet duly welded on existing M.S. angle iron frame for fixing the main switches etc. as required, duly painted with three coats of approved paint including one coat of red oxide. HRS No. 31.14 ( i )

Blanking sheet . Supply and erection of blanking sheet in existing distribution board. HRS No. 31.16 (i)

(L) Miniature Circuit Breaker and Isolator. Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. SP MCB of 9 KA breaking capacity 6 Amp.. to 32 Amp.. HRS No. 31.17a) (ii)

SPN MCB of 9 KA breaking capacity 6 Amp.. To 32 Amp.. HRS No. 31.17(a) (ii)

TPN MCB of 9 KA breaking capacity 40 Amp.. to 63 Amp.. HRS No. 31.17(a) (iii)

(M) Supply and erection of Fittings and Accessories. Erection only of 1x40 watts or 2x40 watts 1220 mm long /1x20 watts or 2x20watts 610 mm long fluorescent tube with fittings by means of 2 Nos. 20 mm diameter 1.60 mm thickness conduit pipe with spring loaded brass flanges at both ends including 0.75 sqmm (24/0.20 mm) PVC copper flexible cable for connecting the tube to the adjascent light point including cost of conduit pipe flanges . PVC flxible cable and petty material required for the same ( Upto 1/2 metre length of pipe ). HRS No. 31.18 (xxii)

Bakelite angle / straight button holder large size. HRS No. 31.18 (xi)

Supply and erection of hexagonal M.S. box 1.60 mm thick having each side 8 cms , 7.5 cms deep top covered with M.S. lid by means of screws including 10 mm dia 30 cm long mild steel rod made into suitable suspension hook and erected in RCC slab for erection of fan , the bottom covered with 3 mm thick bakelite sheet with suitable holes , painting etc. complete with all labour and material required to complete the job. . HRS No. 31.18 (xxvi)

(O) Erection and carriage of fans.. Erection of ceiling fan complete with necessary earthing of fan and regulator including carriage from local railway station /goods transport /PWD store to the site of work. HRS No. 31.20 (i)

Erection of exhaust fan complete with necessary earthing of fan and regulator including carriage from local railway station /goods transport /PWD store to he site of work. HRS No. 31.20 (iii)

(P) Pipe Laying. Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. Heavy guage welded conduit pipe 20 mm dia 1.60 mm thickness flushed. HRS No. 31.21 (xxi)

Heavy guage welded conduit pipe 25 mm dia 1.60 mm thickness flushed. HRS No. 31.21 (xxii)

(Q) Earthing Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required. HRS No. 31.22(iii)

Extra for charcoal or coke and salt for G.I. Plate or copper plate earth electrode. HRS No. 31.22(v)

Pdg. and fixing 25 mm x 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode as required . HRS No. 31.22(xi)

Pdg. and fixing 25 mm x 5 mm G.I. Strip on surface or in recess for connections etc. as required with all labour and material. HRS No. 31.22(xv)

(b) Lightning conductor Galvanised iron. Excavation of earth pit 180 cm. round at top and 90 cm. at bottom 4.5 metres deep and refilling the same in plains including supply of necessary charcoal / coke and salt mixture. HRS No. 31.24 (ii)

Supply and erection of 60 cm. X 60 cm. X 6 mm thick galvanised Iron plate including nacessary bolts and nuts to G.I. tape . HRS No. 31.24 (iv)

Pdg. Standard watering tank including down pipe and C.I. cover with locking arrangement etc. HRS No. 31.24 (v)

Supply and erection of 20 mm x 3 mm thick lightning conductor G.I. tape fixed with suitable G.I. stapples of same size. HRS No. 31.24 (vi)

Supply and erection of G.I. tape 32 mm x 6 mm thick from earth electrode directly in ground and surface , fixed with G.I. stapples of same size. HRS No. 31.24 (vii)

Supply and erection of 25 mm dia meter 1.5 metre long lightning G.I. tube rod tapered in to a point at the top with 16 cm. X 16 cm x 3 mm thick G.I. base plate and necessary nuts and bolts with washer. HRS No. 31.24 (viii)

Prioviding and fixing , testing joint made of 20mm x 3mm thick G.I. strips 125mm long with 4 Nos. G.I. bolts and nuits, check nuts with washer complete. HRS No. 31.24 (ix)

Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections . 25 Sq. mm 4 Core Armoured Cable. HRS No. 31.26 (xIi)

35 Sq. mm 3.5 Core Armoured Cable. HRS No. 31.26 (xxvi)

Supply and erection of suitable compression type brass cable glands for underground Cable. 25 Sqmm to 50 Sqmm Cable 2 to 4 Core. HRS No. 31.28 (iii)

(X) Miscellaneous . Supply and erection of aluminium lugs heavy duty including crimping etc. upto the entire satisfaction of the Engineer-in-charge of the work. 10 sqmm . HRS No. 31.35 (ix) (c)

25 sqmm . HRS No. 31.35 (ix) (e)

35 sqmm . HRS No. 31.35 (ix) (f)

(A) PVC Insulated wiring in recessed conduit. Wiring in 1.5 sq.mm PVC Insulated copper conductor cable in 1.6 mm thick conduit pipe. Fan Point - Medium . HRS No. 31.36

Fan Point- Long. HRS No. 31.36

Light point -Short. HRS No. 31.36 (ii)

Light Point - Medium. HRS No. 31.36

Light Point- Long. HRS No. 31.36

Twin control light point with 2 way 5 Amp.. single pole switch-Short point. HRS No. 31.36 (iii) a

Twin control light point with 2 way 5 Amp.. single pole switch-Long point. HRS No. 31.36 (iii) c

Call bell point including M.S Box of size 180mmx100mmx60mm deep for call bell - HRS No. 31.36 (vi) c

Long point 3 pin 5 Amp. plug point including earthing the 3rd. pin etc. - Medium point. HRS No. 31.36 (vii) b

3 pin 5 Amp.. plug point including earthing the 3rd. pin etc.- Long point. HRS No. 31.36 (vii) c

3 pin 15 Amp. plug point including earthing the 3 rd. pin etc.with 4 sq mm PVC insulated copper conductor cable - Long point. HRS No. 31.36 (viii) c

Supply and erection of PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe. Size 1.5 sqmm (3 / 0.81mm). HRS No. 31.40 (i)

Size 2.50 sqmm (3 / 1.05mm). HRS No. 31.40 (ii)

Size 4 sqmm (7 / 0.85mm). HRS No. 31.40 (iii)

Size 10 sqmm HRS No. 31.40 (v)

Supply and erection of double door sheet steel enclosures distribution boards suitable for MCBs and ELCBs etc. recessed in wall including bonding to earth with all labour and material requared complete the job in all respect upto the entire satisfaction of the Engineer-in Charge of the work. 8-way, TP & N (Horizontal) (8+24) HRS No. 31.41 (v)

8-way, SP & N (Horizontal) HRS No. 31.41 (ii)

Supply and erection of PVC conduit pipe ISI marked (Medium) recessed in wall / ceiling etc. including cost of PVC bends, inspection box and all other material required to complete the job in all respect to the entire satisfaction of Engineer-in-Charge of work. 25 mm dia HRS No. 31.44(b)

Supply and erection of MS sadles and clAmp.s on wall / RCC parapit for fixing underground cable at distance of 0.60 metre centre to centre fixed by means of rawl plug including the cost of all labour and material required to complete the job in all respect. HRS No. 31.48

Pdg. and fixing modular type accessories of approved make in existing box including fixing and making necessary connection, complete in all respect. 10 Amp.. 1 way switch HRS No. 31.56 (i)

10 Amp.. 2 way switch HRS No. 31.56 ( ii )

20 Amp.. switch HRS No. 31.56 ( iii )

10 Amp.. socket HRS No. 31.56 ( iv )

16 Amp.. socket HRS No. 31.56 ( v )

Bell push HRS No. 31.56 ( vi )

Fan regulator HRS No. 31.56 ( vii )

Call bell Ding-Dong ( Monitca ) HRS No. 31.56 ( viii )

Blanking Plate HRS No. 31.56 ( ix )

Pdg. and fixi 1 & 2 module HRS No. 31.57 ( i )

3 Modules HRS No. 31.57 ( ii )

6 Modules HRS No. 31.57 ( iv )

8 Modules HRS No. 31.57 ( v )

12 Modules HRS No. 31.57 ( vi )

S/E of Enclosure for 100Amp. MCCB with all Labour and petty material required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of work. NS-1

Baliyan Electrical Works

INFERNO POWER AND SAFETY