Development of Govt. Medical College Thiruvananthapuram - Phase II - MLT Block (SH Furniture and Signage Works)

Amount

Furniture

Providing, supplying and placing of steel storage unit. Overall size Shall be 916mm(W)x486mm(D)x1981mm(H) with welded construction. It should have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. It should have a Mazak handle and Three way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10)of approved colour.Approved make Godrej,Featherlite or equivalent

Supply, Fitting & Fixing of Bookcase with metal top Overall size shall be 914mm(W)x320mm(D)x1742mm(H). The unique design provides the right rigidity to the Top hinged doors , which shall facilitate easy use. The Book Case shall be made from prime quality CRCA steel with anti rusting treatment. It shall have a Rigid Knock Down Construction. The Top Pannel, Back Pannel and Side Pannel are made from 0.7mm high yield CRCA and other components from 0.8mm CRCA. Each door shall have a 6 Lever Cam Lock with Common Key. 3mm thick glass should be used in each door for clear inside vision whih shall be secured in a metal frame through a rubber gasket. Scissor Mechanism should be provided in each door for receding inside the top of every compartment and it shall ensure parallel and smooth movement. Each door should be provided with plastic side end caps as handle which is easy to grip. Each compartment shall have a storage shelf with a UDL capacity of max 80 Kg. The 4 Door Book Case shall have 18mm PLB Top straight edge with PVC lipping. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10).Approved make Godrej,Featherlite or equivalent

Providing and fixing WHITE BOARD RESIN MAGNETIC:Surface Material-Resin coated sheet surface, Core material-9mm thick Particle board Backing Material-Galvanised steel sheet, Aluminium frame-Anodized 5 microns extruded aluminium section designation 63400 as per IS:1285-2002 - Width of Aluminium Frame = 16mm thickness +- 3 mm tolerance Surface suitable for writing with-Dry wipe Marker Erasibility-Best with Wet cloth / Felt / Sponge

Providing and fixing GREEN RESIN MAGNETIC BOARD Surface Material-Resin coated sheet surface Core material-9mm thick Particle board Backing Material-Galvanised steel sheet Aluminium frame-Anodized 5 microns extruded aluminium section designation 63400 as per IS:1285- 2002 - Width of Aluminium Frame = 16 mm thickness +- 3 mm tolerance Surface suitable for writing with-non Dust Chalk Erasibility-Best with Wet cloth / Felt / Sponge

Pedestal Unit with casters: Supplying, fabricating and installing Pedestal Unit of size 400 mmx 450mm x 700mm with following specification. 1.Panel: - 18mm thick IS 710 BWP marine plywood with hot/cold press machine lamination of 1 mm thick. 2. Drawers: 3 nos with soft close sliders,D handle and multipurpose lock. The bottom panel of the drawers shall be made of 9mm thick IS 710<br>BWP marine plywood and carcase for the drawers shall be made of 18mm IS 710 BWP marine plywood . 3. All visible edges shall be covered with 2 mm PVC edge banding and hidden edges with 0.5 mm PVC edge banding. 4. The pedestal should be assembled using a knockdown fittings system. The casters are installed at the four corners for easy movement. The contractor is required to submit shop drawings with all details of material, fittings, colour etc.to the Engineer in Charge prior to fabrication and all works shall be completed as per the approval from the Engineer in charge and as per the approved list of make.

Conference Table: Supplying and installing Conference Table of size 4800 mm x1200 mm x 750 mm with following specification. 1. Font & Horizontal Panel: 24mm thick IS 710 BWP marine plywood with hot/cold press machine lamination of 1 mm thick. 2. All visible edges shall be covered with 2 mm PVC edge banding and hidden edges with 0.5 mm PVC edge banding. 3. Table Top: 32 mm thick (comprising two layers of 16 mm plywood on either side) IS 710 BWP marine plywood with 1 mm thick lamination and 10mm thick clear toughened beveled glass on top with necessary openings 4. Legs & Vertical Components: 24 mm thickIS 710 BWP marine plywood with 1 mm thick lamination on both sides. 5. The table shall be equipped with 2 nos Pop up boxes containing 2 nos 6/16 A 5 pin electrical sockets, 2 Nos HDMI ports and 2 Nos of Data sockets. 6. The unit shall be assembled using a knockdown fittings system. The table shall be obstruction free framed structure with panels placed 600 mm from the outer edge . The contractor is required to submit shop drawings with all details of material, fittings, colour etc.to the Engineer in Charge prior to fabrication and all works shall be completed as per the approval from the Engineer in charge and as per the approved list of make

Dining Table: Supplying and installing Dining Table of size 1500 mm x 750 mm x 750 mm with following specification. 1.Top Panel: - 18mm thick IS 710 BWP marine plywood with hot/cold press machine lamination of 1 mm thick. 2. All visible edges shall be covered with 2 mm PVC edge banding . 3. Table frame: shall be fabricated with 50mm x 50mm x 2mm thick MS tube frame, supported by legs of 50mm x 50mm x 2mm thick MS tubes, tie member of size 40mm x 80mm x 2mm thick<br>MS tube and all tubular members shall be powder coated with a minimum thickness of 60 microns, andfinished as approved. The contractor is required to submit shop drawings with all details of material,fittings, colour etc.to the Engineer in Charge prior to fabrication and all works shall be completed as per the approval from the Engineer in Charge and as per the approved list of make.

Supplying and placing in position HOD table of the following specifications. 1500W X 750D X 750H Main Worktop-Made of 25mm Thick Pre-laminated board (PLB) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Access Flap provided on work surface for wire management.Return Worktop-Made of 25mm Thick Pre-laminated board (PLB) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Modesty Panel-Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Legs-Cube legs are fabricated from MS ERW Tube of 50 mm x 25 mm x 1.2mm thick and 40 mm x 40 mm x 1.2 mm thick (as per IS: 7138). At the top surface of leg, support brackets of 3 mm thick HR (as per IS: 2062) are welded for fixing worktop. These are welded togesther by argo shield welding. This welded structure is coated with 50 micron epoxy polyester coating. At the base, a plastic cap with M8 molded in-sert is fixed, on to which a straight M8 leveler fitted which allows for adjustment of the height upto 50mm.Cross Members-Cross Members in Unitized T-2 Desk Series are made from 50mm X 25mm X 1.2mm thick ERW tube (as per IS:7138). These are coated with 50 micron epoxy polyester coating.Cross Members are assembled by friction fit PDC joinery and grub screws. There are always two cross members for one table.Access Flap-Soft closing access flap is used in Unitized T-2 Desk Series. Provision for standard size of 8 module electrical (Anchor Roma) is offered.Access flap is made from Aluminum extrusion, PDC parts made from Aluminum Alloy and plastic parts are made from Nylon 6 and wire brush with nylon bristles.Power Box-Power box made with 0.8 mm thick CRCA (IS: 513), with switch plate (8 Module cutout provision for Anchor Roma). This is fixed with worktop along the depth at Access Flap position.Integrated Hinge Door Storage with Drawer-Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Door is fixed with slide on hinges and handle is provided for ease of opening. Drawer is provided with ebco metabox slide and lock for security.

Providing and fixing metal Locker storage size(900mm x 470mm x 1950mm) 12 nos of lockers to form a unit))with provisions for pad locks-Construction & Material - Aesthetically appealing completely knock down construction.The add-on units are stack widthwise to form a row of Lockers.Made from combination of Top panel(0.5mm CRCA), side panel(0.5mm CRCA), Bottom panel(0.5mm CRCA), Back panel(0.5mm CRCA), Top Bottom stiffener(1.2mm CRCA) and End Cover(0.5mm CRCA). ** - CRCA 'D' Grade as per IS-513 - CRCA 'D' Grade as per IS-513 Doors (Without envelope slot) - Made from 0.6mm Thick CRCA (D Grade, IS-513) Soft closing hinge.

Supplying and placing in position office table of the following specifications. 1200W X 600D X 750H Worktop-Made of 25mm Thick Pre-laminated board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Access Flap provided on work surface for wire management.Modesty Panel-Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Legs-Cube legs are fabricated from MS ERW Tube of 50 mm x 25 mm x 1.2mm thick and 40 mm x 40 mm x 1.2 mm thick (as per IS: 7138). At the top surface of leg, support brackets of 3 mm thick HR (as per IS: 2062) are welded for fixing worktop. These are welded together by argo shield welding. This welded structure is coated with 50 micron epoxy polyester coating. At the base, a plastic cap with M8 molded in sert is fixed, on to which a straight M8 leveler fitted which allows for adjustment of the height upto 50mm.Cross Members-Cross Members in Unitised T-2 Desk Series are made from 50mm X 25mm X 1.2mm thick ERW tube (as per IS:7138). These are coated with 50 micron epoxy polyester coating.Cross Members are assembled by friction fit PDC joinery and grub screws. There are always two cross members for one table.Access Flap-Soft closing access flap is used in Unitized T-2 Desk Series. Provision for standard size of 8 module electrical (Anchor Roma) is offered. Access flap is made from Aluminum extrusion, PDC parts made from Aluminum Alloy and plastic parts are made from Nylon 6 and wire brush with nylon bristles.Power Box-Power box made with 0.8 mm thick CRCA (IS: 513), with switch plate (8 Module cutout provision for Anchor Roma). This is fixed with worktop along the depth at Access Flap position

Slotted angle racks: supply, Installation of Slotted angle racks for storage shall be strictly as per the drawings and technical specifications as detailed in the tender and material specification shown above. Rate shall include all necessary accessories, hardware components, transportation, installation, structural components,making good the scratches made during installation etc. as directed by the Engineer In charge.<br>RACK DIMENSIONS - 900 MM (width) X 450 MM (Depth) X 2500<br>MM (height) It will be divided into 4 (Four)compartments / loading levels. Each compartment shall have load bearing capacity of 300 Kg and sufficient space to hold boxes of size 750mm(L)x400mm(W)x 350mm(H) Corner angles shall be of minimum size 40x40x2MM

Supplying and placing in position computer lab table of the following specifications. 1200W X 600D X 750H Worktop-Made of 25mm Thick Pre-laminated board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Access Flap provided on work surface for wire management.Modesty Panel-Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Legs-Cube legs are fabricated from MS ERW Tube of 50 mm x 25 mm x 1.2mm thick and 40 mm x 40 mm x 1.2 mm thick (as per IS: 7138). At the top surface of leg, support brackets of 3 mm thick HR (as per IS: 2062) are welded for fixing worktop. These are welded together by argo shield welding. This welded structure is coated with 50 micron epoxy polyester coating. At the base, a plastic cap with M8 molded insert is fixed, on to which a straight M8 leveler fitted which allows for adjustment of the height upto 50mm.Cross Members-Cross Members in Unitised T-2 Desk Series are made from 50mm X 25mm X 1.2mm thick ERW tube (as per IS:7138). These are coated with 50 micron epoxy polyester coating. Cross Members are assembled by friction fit PDC joinery and grub screws. There are always two cross members for one table. Access Flap-Soft closing access flap is used in Unitized T-2 Desk Series. Provision for standard size of 8 module electrical (Anchor Roma) is offered. Access flap is made from Aluminum extrusion, PDC parts made from Aluminum Alloy and plastic parts are made from Nylon 6 and wire brush with nylon bristles.Power Box-Power box made with 0.8 mm thick CRCA (IS: 513), with switch plate (8 Module cutout provision for Anchor Roma). This is fixed with worktop along the depth at Access Flap position and additional provision for writing board.

UNDER SLAB STORAGE : Material using 710 grade 16 MM Marine plywood with 1mm lamination for exterior side and 7 MM linerfor interior side.For door edgeband using 2X22 MM,Frame using 710 grade 16 MM marine Plywood with both side .77 MM inner lamination with .5X22 MM PVC edgeband .Providing SS soft Close Hinges,D handle etc excluding lock.

PIN-UP BOARDS:Providing and fixing pinup boards. It consist 12mm thick soft boards of good density to be mounted over 12mm thick BWP. ply. The soft board will be covered with a plain fabric (appox Rs.250 /Rmts. of Dark Blue Colour) from front and edges. Suitable steam beach moulding 25mm x 25mm size to be fixed on all four sides and will be finished in aluminium c channel.

Making and fixing of new wooden notice board with sliding glass cover and locking facility , complete in all respect .The display area to be covered with blazer cloth over a padding for fixing paper by pin .( the agency must visit the site before quoting) (dimension 150cmx 100cm)

Floor mounting storage unit: Supplying, fabricating and installing storage units of varying dimensions,length ranging from 800mm to 2400mm, width 450mm, height ranging from 900 mm to 2100mm with following specification. 1.Panel and door shutter: - 18mm thick IS 710 BWP marine plywood with hot/cold press machine lamination of 1 mm thick. 2. All visible edges shall be covered with 2 mm PVC edge banding and hidden edges with 0.5 mm PVC edge banding. 3. The back panel of the storage unit shall be made of 9mm thick IS 710 BWP marine plywood with 1 mm thick lamination. 4. The hardware includes 90 degree soft close hinges, multipurpose lock & D Handles. 5. The unit shall be assembled using a knockdown fittings system. Measurement shall be based on the facia area. The contractor is required to submit shop drawings with all details of material, fittings, colour etc.to the Engineer in Charge prior to fabrication and all works shall be completed as per the approval from the Engineer in Charge and as per the approved list of make.

Overhead storage unit: Supplying, fabricating and installing wall mounting storage units of varying dimensions, depth 400 mm, height ranging from 600 mm to 750 mm with following specification. 1.Panel:- 18mm thick IS 710 BWP marine plywood with hot/cold press machine lamination of 1 mm thick. 2.All visible edges shall be covered with 2 mm PVC edge banding and hidden edges with 0.5 mm PVC edge banding. 3. The back panel of the storage unit shall be 12 mm thick IS 710 BWP marine plywood with 1 mm thick lamination. 4. The hard ware includes 90 degree soft close hinges, multipurpose lock & D Handles. 5. The unit shall be assembled using a knockdown fittings system. Measurement shall be based on the facia area. The contractor is required to submit shop drawings with all details of material, fittings, colour etc.to the Engr in Charge prior to fabrication and all works shall be completed as per the approval from the engineer in charge and as per the approved list of make.

Supply and fixing of under slab storage doors of make 18mm both sides laminated ply of 710 grade BWP ply core and 1mm laminated on both sides shall be fixed with 160 degree or more openable soft closing hinges. All visible corners to have 2mm thick PVC edge banding of approved make.The rates shall include the cost of plywood laminated frame of same nature as per the requirement. Shop drawings shall be submitted before fabrication as per the approval from Engineer in charge

Signage Works

Supply and installation of Level Stickers: 40x20cm on 3mm thick Foamboard with vinyl print of approved colour . All work should be completed as per the instruction of Engineer-in -charge

Supply and installation of Room Name of 15cm height in 3mm Foamboard with Vinyl print, fixing with double side tape, all as per the approval of Engineer in charge

Supply and installation of Room Numbers and bed nos. 4inch circle vinyl print & cut + Lamination-sticker all as per the approval of Engineer in charge

Supply and installation of frosted film including cutting material & fixing etc complete.All work should be completed as per the instruction of Engineer-in -charge.

Supply and installation A3 Color laminated fire exit plan. All work should be completed as per the instruction of Engineer-in -charge.

Stainless steel Box letters: Design, Supply , Installation, testing and commissioning of box letters as per client requirement with minimum 1mm thickness 304 Grade mirror finish stainless steel at specified location of sizes up to English capital/Malayalam letters 500mm height and 30mm width . The letters will be installed as per the site conditions and as approved by the engineer in charge either directly screwed/pasted to available fascia or with suitable backing.The rate shall include cost and conveyance of all materials, structural supports, labour charges, scaffolding, lead, lift etc. complete as per technical specification, sample signage. Same rate is applicable for supply and installation of logo of size : 450mm height as per the site condition.

Macro Enterprises (BID ID -2277845)