Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.0 LAccepted-AOC SARDARPURA 1ST B ROAD NEAR HANUMAN JI KA MANDIR JODHPUR RAJASTHAN 342 003 | JODHPUR | JODHPUR | RAJASTHAN | 342003 | L1 | Accepted-AOC BEING LOWEST AND ACCEPTABLE | |
| 2 | L2₹21.3 L+₹3.4 L (18.7%)Rejected-Finance | L2 | Rejected-Finance BEING NOT LOWEST | |
| 3 | L3₹22.1 L+₹4.2 L (23.1%)Rejected-Finance 37 SUBHASH NAGAR AIR FORCE JODHPUR 342 008 | JODHPUR | JODHPUR | RAJASTHAN | 342008 | L3 | Rejected-Finance BEING NOT LOWEST | |
| 4 | L4₹22.6 L+₹4.6 L (25.6%)Rejected-Finance 07 KH NO 198 KUDI BHAGTASANI JODHPUR 342001 RAJ | JODHPUR | RAJASTHAN | 342001 | L4 | Rejected-Finance BEING NOT LOWEST | |
| 5 | L5₹22.8 L+₹4.9 L (27.1%)Rejected-Finance | L5 | Rejected-Finance BEING NOT LOWEST |
Tender Value
₹21.4 L
EMD Value
₹42,800
Closing Date
21 Oct 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AF JODHPUR
HQ CWE AF JODHPUR 342011 Rajasthan
PROVN OF LAB SIZE 7.00 X 10.60 MTR WITH CORRIDOR AT KV NO 2 UNDER AGE B/R-1 GE (AF) NO 2 JODHPUR.
2024_MES_675452_1
88088/E8
Open Tender
Civil Works
Item Rate
180 days
GE AF NO 2 JODHPUR
As per NIT
8 documents required · 8 mandatory
₹500
GE AF NO 2 JODHPUR
₹42,800
Yes
21 Nov 2024
20 Sept 2024
23 Oct 2024
20 Sept 2024
21 Oct 2024
14 Oct 2024
Amount
Surface excavation in soft soil n exc 30 cm deep and avg 15 cm deep and getting out complete.
Excavating in trenches, n exc 1.5m wide & n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan & n exc 1.5m in depth & getting out in soft/loose soil
Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm in soft/loose soil.
M&L Sand filling under floors or in foundations including watering and consolidation
Removing excavated soil n exc. 50m & depositing where directed at a level n exc. 1.5 m above the starting point
M&L PCC in foundations, filling and mass-concrete type D2(1:4:8)using 40 mm graded stone aggregate
M&L Pre-cast cement concrete block type C1 1:3:6 (20mm graded coarse agg) set in Cm 1:4 masonry with solid blocks, exc. 10 cm in width and setting in mortar, complete
M&L Providing precast cement concrete type C1 1:3:6 (20mm graded coarse agg) set in Cm 1:4 solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) setting in mortar, complete, in walls
M&L Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface and
M&L Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface
M&L RCC M-25 design mix using 20 mm graded aggregate in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete
M&L RCC M-25 design mix using 20 mm graded aggregate in Columns, pillars, piers, posts and struts
M&L RCC M-25 design mix using 20 mm graded aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span
M&L RCC M-25 design mix using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like
M&L Sand stone slabs 50mm thick in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, etc. n exc. 2m in length, punched dressed on face and along exposed dges, self faced on other side and set and pointed in cement mortar 1:4. complete
M&L Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality
M&L Mild steel TMT bars 5mm dia & over upto & including 10mm dia in stirrups, spacers & binders, cut to length, bent to shape required, binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; not exc. 200mm thick (Horizontal or sloping) Rough finished surfaces of concrete flat
Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor & roofs n exc 20 cm wide & sides of RCC/PCC bands in walls, horizintal or sloping & similar work exc 10cm but n exc 20cm wide Roughed finished surface of concrete
Formwork to sides of concrete foundations, footings, bases of columns, raft & raft beams, sides & soffits of foundation & plinth beams; and similar work; verticle or to batter Rough finished surfaces of concrete flat
Formwork to sides of pillars, posts, struts, piers, columns, & stanchions Rough finished surfaces of concrete Square, rectangular or polygonal
Formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. Rough finished surfaces of concrete flat
Hardcore of Broken brick bats n exc. 63mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a true surface
M&L 75 mm thick PCC type C-1, (1:3:6) using 40mm graded stone aggregate Finished even & smooth without using extra cement as in plinth protection
M&L, 15mm thick rendering in CM 1:6 to brick/conc wall surfaces trowelled to even & smooth w/o using extra cement.
M&L Rendering 5mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling
M&L Rendering 15mm thick on stone masonry surfaces or surface other than fair face of brickwork in CM (1:4) finished even & smooth (without using extra cement)
Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth ceiling/wall
Applying two coats of Premium acrylic emulsion paint on new Ceiling surface including preparation of surface over one coat primer
Applying Two coats of Premium acrylic emulsion paint of approved manufacturer, of required shade and colour complete, as per manufacturer's specification over one coat primer on wall
Applying two coats of Premium Acrylic Smooth exterior paint , white or tinted on new wall surface including preparation of surface & one coat primer.
M&L for preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.
Framed work as in doors or gates, cooler stand of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive or steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing of Fe-290(Gde E-165) complete
M&L for preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide complete all as specified and directed.
S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed all as specified and as directed
S&F Aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed size 300mm long.
S&F 18mm thick Solid UPVC (WPC) of density not less than 0.60 gm/CM3 decorative face on one faces and other face are white ; fixed with screws to timber frame/cement surface incl all necessary required fittings work as in wardrobe shutter approval by Engr-in-charge.
S&F Catchable Magnet for cabinate complete all as directed
S & F Auto-hinges, Brass, bright finish complete all as directed
S&F Chalk board size 3.0 x 1.40 mtr as approved by Engr-incharge complete all as directed
S&F Pin-up board 1.2x1.40 mtr as approved by Engr-incharge complete all as directed
S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples
S&F only Butt hinges 100mm size, medium weight, cold rolled mild steel.
S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section.
S&F Aluminium handles 125mm size, cast type, anodised
S & F powder coated aluminum sliding window three track with frame & two glass shutter using 4 mm thick glass tinted modi guard and one shutter with stainless steel wire gauge wire cloth 0.31 mm nominal dia of wire and width of aperture 1.61 mm using aluminum powder coated section aluminum cleat , PVC track, bearing, handle lock rubber beading etc complete fittings as approved. Note :- Size of aluminum section shall be under – (i) three track top and vertical – jindal main 2010. Section No 20621 or equivalent as approved by GE. (ii) Three track bottom – Jindal main – 2010 section 20620 or equivalent as approved by GE. (iii) Shutter Vertical Section - Jindal main – 2010 section 20604 or equivalent as approved by GE. (iv) Shutter top and bottom - Jindal main – 2010 section 20604 or equivalent as approved by GE. (v) Shutter vertical middle ( interlock) - Jindal main – 2010 section 20605 or equivalent as approved by GE.
S&F powder coated anodized aluminum frame for doors, windows , ventilators with one of more rebates including joining cleat for fixing etc. completed all as specified
S&F aluminum anodized grill diamond shape aperture of round bars including necessary joining cleats, clips anodised complete all as specified.
M&L 100mm thick Cement concrete type B- 2, 1:4:8 (40mm graded aggregate)
M & L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and including 15mm thick cement and sand screed (1:4) complete all as specified and directed by Engineer - in - Charge.
M & L Machine cut kota stone 20-25mm thick as skirting and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.
M&L for 20mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl making round the edge of granite.
M&L Preparation of roof top surfaces, providing and applying UV stable single component smart care damp proof ultra is a fibre reinforced elastomeric liquid applied water proofing membrane formulated with PU hybrid polymers and reinforcing acrylics fibres and having SRI of 106 on top of concrete roof surface in three coats including self primer at ratio pf damp proof and water 3:1 and coverage @ 1 Ltr /10 sqm with a thickness of 650micron Note: 6 Hrs interval between two coats will be maintain& the work will be carried out through company applcator duly got approved from Accepting officer in writing before incorporation and paid only after receiving of the warrenty certificate from the company.Make : Asian paint or equivalent as approved by GE
S&F Stainless steel sink with draining board, made out of 1.00mm thick sheet for laboratory with plug, with waste pipe washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm
S&F bib taps long body, 15mm bore dia, fancy type, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe all as specified .
S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I 1000 Ltrs Capacity
S&F for 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed
S&F Ball valves PTMT 20mm bore, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule
Supplying and laying of CPVC pipes 25mm OD SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors, complete all as specified
Supplying and laying of CPVC pipes 20mm OD SDR 11 & Plain CPVC SDR 11 fittings in walls incl cutting or laying in floors complete all as specified
S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors
S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls
S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with acces door
M&L 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement
S&F 75mm PVC (SWR) junction double, (double T), equal or unequal
S&F 75mm PVC (SWR) bends any radius with access door
Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.
S&F Salt glazed stoneware gully traps of size 150 x 150 mm, square or rounded mouthed, type `P' fixed in CM 1:6 and cover with RCC cover slab of size 200 X 200 X 50mm incl necessary exc, pcc etc.
Cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in concrete bed to drain pipe 150mm bore including packing under and haunching against the sides of pipes after they are laid down and tested complete.(i) Haunching over off set of foundation of manhole shall be measured alongwith foundation of manhole. (ii) Thickness of concrete bed shall be 10cm. (iii) Pipe shall be measured and paid for separately.
M&L Salted glazed stone ware drain pipes 150mm bore class ‘A’ laid on concrete bed and jointed complete all as directed.
Cutting opening in block masonry walls (any descript-ion) for conect to new pipeline other openings (with or without reveals) or enlarging existing openings, including trimming surfaces to receive rendering, etc.
M&L PCC in foundations, filling and mass-concrete type C2 (1:3:6) using 40 mm graded stone aggregate
Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4)
M&L PCC in surface channels and drains type B1 (1:2:4) using 20 mm graded stone aggregate
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extgra cement including forms, moulds mitred/stopped ends etc.
M&L Rendering 15mm thick on stone masonry surfaces or surface other than fair face of brickwork in CM (1:4) mixed with water proofing compound 3% by weight of cement finished even & smooth without using extra cement ( WPC shall be measured & paid separately)
M&L Rendering 10mm thick on fair face of brick work/concrete surfaces in CM (1:4)
Supplying only Integral waterproofing compound
M&L Precast cement concrete type B1 (1:2:4) using 20 mm graded aggregate set in CM(1:6) in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces
M&L for point wiring with 1.5 Sq. mm, multi-stranded copper conductor,FRLSH, single core, PVC insulated and unsheathed cable for phase and neutral, including 1.5 Sq. mm PVC insulated unsheathed multistranded copper conductor single core cable as earth continuity conductor (in green color) connected to common earth dolly, drawn in(concealed)Conduit / including PVC Casing and Caping, GI terminal boxes 1.2mm thick fixed flush to wall surface, covered with & including 3 mm thick plastic laminated sheet top cover for mounting switch and sockets etc. complete all as specified and directed for following : - (a) One light point/ fan point controlled by one switch or one ceiling fan point controlled by one switch & electronic type fan regulator.
(b) One 3 pin 5 Amp switch & socket outlet on same board with other switches.
(c) One 3 pin 5 Amp switch & socket outlet on Independant board.
All same as per item ser No 81 here-in-above but wiring using 2.5 sqmm multi-stranded copper conductor,FRLSH, single core, PVC insulated and unsheathed cable, including 2.5 Sq. mm PVC insulated unsheathed multistranded copper conductor single core cable as earth continuity conductor (in green color) connected to common earth dolly for 6 pin, 15/16 Amps socket outlet on independant board.
S&F Ceiling rose Modular type surface bakelite 65x50mm three terminal.
S&F switch modular single pole one way 5/6 Amps 230 volt 1 module.
S&F switch modular single pole one way 15/16 Amps 230 volt 1 module.
S&F Socket modular 6 Amp 2/3 pin combined two module.
S&F Socket modular 6&16 Amp 2/3 pin combined two module.
S&F electronic fan regulator modular stepped type 120 watt, two module.
Supply and fixing of LED lights fitting 1x 22W, 230V,AC decorative Glaze ultra aluminium box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Make-jaguar item code-LGLZU1X022XN
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor(BLDC) connecting up including provision of flexible PVC conduit from ceiling rose or connector to fan to cover PVC cable including marking of MES number and fixed in position as recommended by manufacturer complete all as specified.
S&F Exhaust fan 300 mm sweep, made of sturdy engineering plastic, air delivery shall not be less than 350 CFM at 1440 RPM mounted in suitable opening arrangement with louvers shutters suitable for operation on 240 volt, single phase, 50 cycle per second, AC supply and connecting up including provision of flexible PVC conduit from ceiling rose or connector to fan to cover PVC cable including writing MES No with black paint as directed by engr-in-charge and fixed in position as recommended by manufacturer complete all as specified.
Supply and replace sheet metal enclosure distribution board for 240 volts, 12 way horizontal type, double door, single pole and neutral with 200 Amps rated neutral copper bus bar for housing MCB and fixed flush in wall surface, and tested on completion complete including taking out old all as directed.
Supply and fixing MCB single pole 6-32 Amps, 240 volts, 10 kA rupturing capacity providing in DB complete including connection & testing all as specified.
M&L for MCB SPN/DP 40 to 63 Amps 240 volts, 10 kA rupturing capacity providing in DB complete including connection & testing all as specified.
Material and labour for sand cushining to underground cable, provided with a layer 8 cm before and 15cm after laying and stretching jointing and testing the cable all as specified and directed
Supply, laying and testing LT UG cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sqmm 4 core.
Supply and laying unreinforced pre costf concrete cable cover, class HVP: type 01 with Peek size 250mm X 150mm X40mm
M/S SUA DEVI (BID ID -3145758)
DEV INDUSTRIES (BID ID -3146238)
Sukhdev Construction company (BID ID -3146030)
M/s M A TRADERS (BID ID -3146200)
M/S IK CONSTRUCTION (BID ID -3146090)
Savitri Enterprises (BID ID -3146198)
M.D. CONSTRUCTION CO. (BID ID -3146044)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .