Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹3.0 L
Closing Date
27 May 2025, 9:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka Industrial Areas Development Board
Assistant Executive Engineer-Ele
Arranging Power Supply to water supply project from Yelahanka BWSSB Pumping station in the premises of Pinakini Bhavan to Devanahalli General Industrial Area, Devanahalli Taluk, Bengaluru Rural District (2nd Call)
KIADB/2024-25/EL/WORK_INDENT208/CALL-2
KIADB/2024-25/EL/WORK_INDENT208/CALL-2
Open
Electrical
Two Tender Document System(Two Cover)
KIADB Head Office Bangalore
2 documents required · 2 mandatory
To qualify for award of this contract, each Tenderer in its/his name should have in the last five years period i.e. (2020-21 to 2024-25) Mandating satisfactory completion as a prime contractor for at least One Similar Nature of Electrical work involving such as Arranging Power Supply/pump house panel and switch gear works, to an extent of not less than 50% of the amount put to tender (i.e., Rs.99.09 lakhs). (Work executed and work done certificates issued under Joint Venture shall not be considered)
Executed in any one financial year, the following minimum quantities of work (Supply & Erection) (80% quantity of work put to tender): Certificates of proof shall be enclosed from competent Authority not below the rank of Executive Engineer in Government / Public Sectors/Government Undertaking Organizations. (Quantities executed certificates issued under Joint Venture shall not be considered). (1) 11 KV HTUG Cable 3C x 240 Sqmm: 0.26 Km, (2) 11 kV/433 V Distribution Transformer-500 KVA: 2 Nos, (3) 500 KVA DG Set: 1 No, (4) FCMA Soft starter / control Panel/KIOSK: 5 Nos
Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity (AxNx1.5 - B), where, A: Maximum value of Electrical engineering works executed in any one year during the last five years (updated to 2024-25 price level) taking into account the completed as well as works in progress. N : Number of years prescribed for completion of the works for which tenders are invited. B:Value, at 2024-25 price level, of existing commitments and on-going works to be completed during the 3 Months.
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
To qualify for award of this contract, each Tenderer in its/his name should have in the last five years period i.e. (2020-21 to 2024-25). Achieved in at least two financial years a minimum financial turnover of Rs.396.36 Lakhs. (Electrical Contract Works Only) (Not less than 2 times the amount put to tender).
Each Tenderer should further demonstrate: liquid assets and /or availability of credit facilities of not less than Rs.59.45 lakhs (Credit lines/ letter of credit/ certificates from Public sector banks/Nationalized Banks (as per RBI guidelines) not less than 30% of the amount put to tender for meeting the fund requirement etc)
Reports on the financial standing of the tenderer, such as profit and loss statements and auditors reports for the last five years
List of Financial Resources with Certificates
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
₹4,960
₹3.0 L
12 May 2025
12 May 2025
28 May 2025
16 May 2025
17 May 2025
Arranging Power Supply to water supply project from Yelahanka BWSSB Pumping station in the premises of Pinakini Bhavan to Devanahalli General Industrial Area, Devanahalli Taluk, Bengaluru Rural District
Part-A : Tapping nearby 11 KV Line: Supply of 11kV, 3x240 Sqmm XLPE UG Cable with all lead and lifts complete as per specification & direction of Engineer in charge of the work.
Supply of Heat Shrinkable Outdoor Type Cable Termination Kit for XLPE Cable 3x240 Sqmm with all lead and lifts complete as per specification & direction of Engineer in charge of the work.
Supply of Cable termination kit Indoor HS Type Suitable for 3x240 Sqmm Cable with all lead and lifts complete as per specification & direction of Engineer in charge of the work.
Supply of Route and Joint Indicating Stones with all lead and lifts complete as per specification & direction of Engineer in charge of the work.
Supply of GI Pipe, 100 mm Dia for drain crossing, cable raising etc., with all lead and lifts complete as per specification & direction of Engineer in charge of the work.
Labour charges : Laying of cable in trench with all lead and lifts complete as per specification & direction of Engineer in charge of the work.
Making of cable terminations for 11KV class 3Cx240 Sqmm XLPE UG Cable with all lead and lifts complete as per specification & direction of Engineer in charge of the work.
Earth work excavation by manual means for drains, canals, waste weir, draft,approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dra...
Fixing of Route & Joint Indicating Stones with all lead and lifts complete as per specification & direction of Engineer in charge of the work.
Laying of GI Pipe with all lead and lifts complete as per specification & direction of Engineer in charge of the work.
Laying of UG Cables byNormal Soil - 6” Bore (UG cable along with upto 5 Nos of 50/42 mm or 40/33 mm HDPE/PLB Pipe) with all lead and lifts complete as per specification & direction of Engineer in ch...
Part-B : Providing HT Metering Cubicle & RMU : Supplying of 11 kV HT Metering cubicle of different CT Ratio, Both side cable entry type with 3 CT & 3 PT, With Transparent Cover TTB, with 30x8 mm Coppe...
Supplying of Load Break Switch with Panel with all lead and lifts complete as per specification & direction of Engineer in charge of the work.
Construction of platform with size stone, cement concert for erection of 500 kVA Transformer/Metering cubicle/Heavy Equipment. Construction of platform (1.5x1.5x1.2) Mtr in size stone, for erection of...
Supply of DP Structure using RCC Pole - 9 Mtr Long, 145 Kg WL with all lead and lifts complete as per specification & direction of Engineer in charge of the work.
Supply of 11 kV, 5 KN Polymeric Pin Insulator (24 mm Dia FRP Rod)
Supply of Guy Set Complete with No. 15 Strain Insulator & Concreting materials with all lead and lifts complete as per specification & direction of Engineer in charge of the work.
Supply of Caution/Danger Board with all lead and lifts complete as per specification & direction of Engineer in charge of the work.
Supplying Earthing materials pipe type for grounding (Single Electrode with accessories) with all lead and lifts complete as per specification & direction of Engineer in charge of the work.
Supply of 11 KV lightening Arrestors,Metal oxide, 9 kv, 5 ka with all lead and lifts complete as per specification & direction of Engineer in charge of the work.
Supplying of 11 kV, 400 Amps Double Break GOS with all lead and lifts complete as per specification & direction of Engineer in charge of the work.
Supplying of H-Frame for mounting GOS with all lead and lifts complete as per specification & direction of Engineer in charge of the work.
Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., complete....
Providing chain link fencing 50 mm size of 8 guage properly stretched between rectangular Poles and fixed with suitable bolts & nuts, the free ends shall be welded to the Pole and block pipe at top an...
RMU 3 Way, (2OD + 1VL,) One Incomer + One Breakers + One outgoing, 350 MVA, 630 Amps with all lead and lifts complete as per specification & direction of Engineer in charge of the work.
Bed Concreting with CC 1:2:4 [M-15] Using 20mm Nominal size graded crushed coarse aggregates with all lead and lifts complete as per specification & direction of Engineer in charge of the work.
Foundation with CC 1:4:8 [M-15] Using 20mm Nominal size graded crushed coarse aggregates with all lead and lifts complete as per specification & direction of Engineer in charge of the work.
Providing Reinforecement TMT Fe 550/550 D with all lead and lifts complete as per specification & direction of Engineer in charge of the work.
Supplying of Frame of MS Channel 100x50 mm and MS angle 40x40x5 mm welding etc., with all lead and lifts complete as per specification & direction of Engineer in charge of the work.
Rod type earthing with 40 mm Dia, 3 Mtr long MS rod as per specification & drawing including digging of pit & fixing with all lead and lifts complete as per specification & direction of Engineer in ch...
Lettering the RMU with enamel paint and also writing single line diagram of each panel, caution Board, Danger Board etc., including cost of Paint, Brush etc., with all lead and lifts complete as per s...
Labour Charges : Erection of 11 kV HT Metering cubicle of different CT Ratio, Both side cable entry type with 3 CT & 3 PT, With Transparent Cover TTB, with 30x8 mm Copper Busbar, Modem & 2 No of Meter...
Erection of DP Structure using RCC Pole - 9 Mtr Long, 145 Kg WL with all lead and lifts complete as per specification & direction of Engineer in charge of the work.
Erection of Guy Set Complete with No. 15 Strain Insulator & Concreting materials with all lead and lifts complete as per specification & direction of Engineer in charge of the work.
Fixing of Guy concreting with Boulders, Mud & Sand As per Drawing No. BESCOM/GM/CP/7/dt: 24.10.07. (with out cement) with all lead and lifts complete as per specification & direction of Engineer in ch...
Fixing of Caution/Danger Board with all lead and lifts complete as per specification & direction of Engineer in charge of the work.
Fxing of Earthing materials pipe type for grounding (Single Electrode with accessories) with all lead and lifts complete as per specification & direction of Engineer in charge of the work.
Fixing of 11 KV lightening Arrestors,Metal oxide, 9 kv, 5 ka with all lead and lifts complete as per specification & direction of Engineer in charge of the work.
Fixing of 11 kV, 400 Amps Double Break GOS with all lead and lifts complete as per specification & direction of Engineer in charge of the work.
Fixing of H-Frame for mounting GOS with all lead and lifts complete as per specification & direction of Engineer in charge of the work.
Earth Excavation for RMU Foundation depositing of earth on bank up to a lead of 50 Mtr and with a lift up to 1.5 Mtr with all lead and lifts complete as per specification & direction of Engineer in ch...
Labour charges for Fixing foundation frame of MS channel 100x50 mm and MS angle 40x40x5 mm welding, fixing in concrete, aligning the RMU on foundation bed, assembly of units, connecting Bus Bars from ...
Part-C : Providing transformer : Supply Caution/Danger Board with all lead and lifts complete as per specification & direction of Engineer in charge of the work.
GI Pipe, 100 mm Dia for drain crossing, cable raising etc.,
Supply of 630 kVA, 11 kV/433 V, 3 phase Delta Star, Dyn11 : Supply of Auxiliary Transformer with copper windings & oil, cable termination type on both HT & LT outdoor type with off load tap changer in...
Labour charges for erection of transformer & transformers accessories with all lead and lifts complete as per specification & direction of Engineer in charge of the work.
Supply of LT Distribution box for500KVA with 2 nos of MCCB with all lead and lifts complete as per specification & direction of Engineer in charge of the work.
Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest
microcontroller based, digital readout of percentage leakage
Part-D: Providing 500KVA/400kw Diesel Generator set: Supplying, installing, testing and commissioning of DG set with Power rating as per std ref BS 5514/ISO 3046/ ISO 8528 & IS 1002/ISO 3046 Gen set s...
Part-E : Providing 1.1 KV LT UG Cable From DTC to Control Panel : Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured 3.5c X 240 Sq MM LTUG Cable as per IS-15...
Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable 3.5 x 225/240/300 with all lead and lifts complete as per specification & direction of Engineer in charge of the work.
Labour Charges : Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 120 to 240 Sqmm with all lead and lift...
Making of Heat shrinkable Type Terminations 120 to 240 Sqmm with all lead and lifts complete as per specification & direction of Engineer in charge of the work.
Supply of 425HP FCMA Soft starter panel: MS Enclosure Indoor Type made out of 14G CRCA Sheet steel free standing type complete with pretretment process with Powder coating , fitted with the followi...
Supply of L.T Motor control panel Board with 1250Amps Kiosak suitable for pumpo with motor: MS Enclosure Indoor Type made out of 14G CRCA Sheet steel free standing type complete with pretretment pro...
Supply of 1250 AMPS KIOSK: MS Enclosure OUTDOOR TYPE made out of 14G CRCA Sheet steel free standing type complete with pretretment process with polypropylene Powder coating , fitted with the followin...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Bid document.pdf
Tender Document • 1.52 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .