Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹1.9 Cr
EMD Value
₹3.9 L
Closing Date
1 Jul 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Barrackpore Division
HINDUSTAN AERONAUTICS LIMITED Barrackpore Division Barrackpore Post Parganas (N) , Dist. 24 W. Bengal - 700 120 Phone : 2592-0157/2592-0163 Fax No : 91-033-2592-2379
PATHWAY AROUND THE JHEEL, RETAINING WALL PARTLY AND FENCING AT HAL BARRACKPORE.
7683
HAL/BKP/NIT/CIVIL/244/2024
Works
Helicopter Complex -Barrackpore Divn-PM-Cheetah-Chetak-Works-Civil
₹0
₹3.9 L
1 Jul 2024
31 May 2024
31 May 2024
1 Jul 2024
Name of the Individual / Firm / Company: * Mandatory
Type of ownership
Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,
Address for correspondence:
Goods & Service Tax Registration No
Format of Undertaking
PAN No.:
Electrical Licence.:
Contact details
Please Enter Contact person Name
Pls Enter Mobile No
Average annual financial turn over during the last 3 years, ending 31st March of the previous financial year [ should not be less than 30% of Amount put to tender]
TURN OVER IN Rupees
Enclosed
Enclosed
Enclosed
ESI & PF Nos with proof (If any)
Related Document to be Uploaded to e-procurement Portal
Bank(s) details: [Copy of the cheque leaf to be uploaded]
Related Document to be Uploaded to e-procurement Portal (Note Canceled cheque leaf to be uploaded)
Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the date of Tender Notice.
Pls Enter Details of 'Name of the Bank' , 'Date of Issue','Value in Rs
Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.
40% (Three Works)
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Please enter Details for Work No 1
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No II
work done
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No III
Details of person holding the power of Attorney (If different from contact person)
Related Document to be Uploaded to eProcurement Portal
Pls Enter Details for Person holding Power of Attorney
DECLARATION :
Pls Accept The Declaration
DECLARATION II
Pls Accept the Delaration II
Description
Dismantling of existing/ damaged concrete of any description and in position including disposal of unserviceable material etc. complete as directed by EIC.
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge
Removal of old damaged plaster (any thickness) including racking, hacking, chipping & scrubbing carefully without causing any damage to the surroundings etc. complete as directed by EIC.
Earthwork in excavation over areas exceeding 1.5 m in width or 10.00 sqm. on plan including dewatering, dressing of sides, levelling and ramming of bottom and getting out the excavated soil within a lead of 50 m as per direction of Engineer-in-Charge. (All type of soill).
Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pierholes etc. not exceeding 10 sqm. on plan and not exceeding 1.5m in depth and getting out. (Average of Soft / loose, Hard / dense soil) including dewatering as per direction of Engineer-in-Charge.
Returning, filling in excavated earth including spreading, levelling, watering and well ramming in layers not exceeding 25 cm as per direction of Engineer-in-Charge. (Soft/loose soil)
Supplying, stacking and filling of local earth (including royalty) by mechanical transport or manual means including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, embankment, plinth, sides of foundation etc. complete as directed by EIC.
Removing excavated material (soil) beyond 50 m and upto a total distance of 350 m and depositing where directed all as per direction of Engineer-in-Charge.Removing include for loading into and unloading from barrows, carts, baskets, etc., or mechnical transport vehicles etc. Removal shall be assumed to be done by the shortest practicable route, and payment shall not necessarily be made for the route actually taken. No additional payment shall be allowed for roads in bad repair, gradients, or carting over unconsolidated ground.
Laying brick flat soling in pathway and inclind embankment and floor of sub-class "B" bricks including laying on and including 25 mm thick layer of sand and filling the joints with cement mortar 1:4, preparation of earth suface including compaction, leveling, slope preparation etc. complete as per direction of Engineer-in-Charge.
Providing and laying in position plain cement concrete type C2 of mix 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centering and shuttering in foundation and mass concrete all as specified and as per direction of Engineer-in-Charge.
Formwork to sides of concrete foundations, retaining wall, footings, bases of columns, raft and raft beaks, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter in flat surface as per direction of Engineer-in-Charge.
Providing and laying 1:1/2:3 (1 cement :1 11/2 coarse sand: 3 graded stone aggregate 20 mm nominal size cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering etc. complete as directed by EIC.
Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 20 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer- in-charge. Note:- Cement content considered in M-30 is not less that 340 kg/cum
Supplying Reinforcement steel for reinforced cement concrete work including straightening, cutting, bending, placing in position and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. all complete, TMT Bars of all diameter conforming to IS 1786 all as specified & as per direction of Engineer-in-Charge.
Providing and laying precast cement concrete for slab, embankment slab, beam of approved size and shape 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in cement mortar (1:4) complete with joints to match as per direction of Engineer-in-Charge.
Brick work with sub-class "B" brick in cement mortar (1:6) straight or curved on plan exceeding 6m mean radius built in as per direction of Engineer-in-Charge.
Providing 20 mm thick cement plaster 1:4 (1 cement : 4 sand) on fair faces of brick work or concrete surface including finishing even and smooth using extra cement as per direction of Engineer-in-Charge.
Providing 15 mm thick cement plaster 1:4 (1 cement : 4 sand) on fair faces of brick work or concrete including finishing even and smooth without using extra cement as per direction of Engineer-in-Charge.
Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge
Providing and laying Non Pressure NP-4 class (Heavy duty) 1800mm dia R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete as directed by EIC.
Providing and laying cement concrete (1:2:4:) with 20 mm graded stone aggregate in floor, cloumn, beam, wall etc. excluding shuttering and reinforcement etc. complete as directed by EIC.
Supplying and applying water proofing compound etc. complete as directed by EIC.
Steel work welded in built up tubuler sections/ framed work including use of plate, post, cutting, hoisting, fixing in position and applying a priming coat of approved steel primer etc. complete as directed by EIC.
Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20 mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge.
Supplying and fixing of decorative polished colour paver tiles of approved decorative shape and size of not less than 22mm thick including providing screeding of 15 mm in cement mortar 1:6, laying tiles in neat cement slurry, pointing with white cement mixed with matching colour pigment, cleaning the surface, curing etc. complete as directed by EIC.
Providing and applying two coat of Synthetic Enamal paint with one coat of approved primer on wooden/concrete/ steel surfaces including necessary preparation, cleaning, scaffolding etc. complete as directed by EIC.
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
Supplying and fixing turn buckles and straining bolts for barbed wire fencing etc. complet as directed by EIC
Supplying and fixing of Welded steel wire fabric of required width having rectangular mesh prepainted with two or more coats of epoxy paint of approved shade over a coat of primer etc. Complete as dircetd by EIC.
Providing and filling in position rubberized bitumen hot sealing compound for sealing of expansion joints in roads / pavements including removal of existing compound, preparation etc. all complete as per direction of the Engineer-in-Charge.
Cautionary /warning sign boards of equilateral triangular shape having each side of 900 mm with support length of 3650 mm
Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.
Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and directions of Engineer-in-Charge.
Providing and fixing on wall face unplasticised Rigid 110mm dia PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring, Single socketed pipes etc. complete as directed by EIC..
Supplying and fixing of Mexican grass including leveling , earth, earth preparation watering etc. complete as direct by EIC.
Supplying and harvesting of Palm tree or other approved tree not less than 8 feet height etc. complete as directed by EIC.
Supplying and harvesting of hedges of width not less than 1.5 feet including leveling , earth, earth preparation watering etc. complete as directed by EIC.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
NITJheelretainingwall.pdf
TENDER_DOCUMENT • 0.54 MB
generalconditionsofcontract.pdf
TENDER_DOCUMENT • 1.88 MB
PQcriteriaJheelpathway.xlsm
TENDER_DOCUMENT • 0.03 MB
PQJheelretainingwall.pdf
TENDER_DOCUMENT • 0.14 MB
PriceBidJheelretainingwall.pdf
TENDER_DOCUMENT • 0.52 MB
UndertakingJheelretainingwall.pdf
TENDER_DOCUMENT • 0.40 MB
PricebidJheel.xlsm
TENDER_DOCUMENT • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .