Re-Construction of temple at Sri Kodanda Ramalayam, Pedanindrakolanu (V), Nidamarru (M), Eluru District.

Dismantling, clearing away and carefully stacking useful materials for re-use and disposal of unserviceable materials with 100m lead as directed by Executive Engineer duly taking actual premeasurements before dismantling including all labour charges, overheads & contractor profit etc., complete

a) Un reinforced upto 15cm thick

b) Reinforced cement concrete

c) Brick Masonry & Cement mortar

Earth work excavation for foundations (Manual Means) of buildings, septic tank, sump, compound wall in ordinary soils and depositing on bank with an initial lead of 10m and depth up to 3m including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work excluding seigniorage excluding dewatering charges etc., as per SS 20 B(APSS 308)

Filling with carted coarse sand in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming jincluding cost and conveyance of water to work site and all operaitonal,incidental labour charges, hire charges of T&P etc., excluding seniorage charges and sales & other taxes and including overheads & contractors profit etc., complete for finished item of work (APSS NO.309&310)

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402)

Vibrated Plain Cement Concrete (1:3:6) nominal mix using 40mm size machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site excluding seigniorage charges, sales & other taxes son all materials and including all charges for mixing, laying concerete in position, vibrating, curing, centering using Steel scaffolding pipes, Jack props, wallers, Foot plates,brackets, steel centering plates etc., Including all operational, incidental and labour charges, overheads & contractors profit etc., complete for finished item of work for footings. (APSS No. 402)

Ornamental brick work in C.M (1:5) using common burnt clay bricks of class as per Table- 1 of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 35 Kg/Sqcm, bats and flat tiles including cost and conveyance of all materials like cement, sand, bricks etc to site importation of silpi labour, excluding scaffolding for construction of masonry but including lift charges and soaking the bricks in clean water atleast an hour immediately before use, curing etc., and over heads and contractor profit and excluding seigniorage charges , sales & other taxes etc., complete for finished item of work. (as per Silpi SSR 2012)

A). Up to Sthambhavargam

B) Above Sthambhavargam (1st floor)

VRCC M-20 grade nominal mix (cement :fine aggreegate: coarse aggregate) corresponding to table 9 of IS456 using 20mm size graded machine crushed hard granite metal (coarse aggreegate) from approved Quarry Including cost and conveyance) of all materials like cement, fine aggregate(sand)coarse aggregate, water etc, to site and including centering and shuttering etc, but excluding seigniorage charges, sales and other taxes on all materials including all operational incidental and labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, and including overheads & contractors profit complete for finished item of work

A) Lintel (with out vibrating)

B) Roof slab 5" thick

Providing High Yield Strength Deformed (HYSD) (Fe 415 grade as per IS 1786-1979) of different diameters for RCC works including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational labour charges such as cutting, bending, placing in position, tying excluding sales and other taxes on all materials etc., and including overheads & contractors profit complete for finished item of work in all flours. (APSS No.126)

Supplying and fixing of black granite cut stone door frame of required size and shape as per plan or as directed during execution of work including cost and conveyance of stone, dressing charges and fixing in position and excluding seigniorage charges, sales & other taxes on all operational charges and including overheads & contractors profit etc., complete for finished item of work as per Silpi SSR 2012.

(a) Cost of cut sonte

(b) Dressing of stone with fine line palamana dressing instead of fine dressing and polishing and padams at top and bottom, naga bandam on verticle stones etc., complete

(c) Fixing charges for door frame in position

Supplying and fixing of black granite cut stone Somasutram Nalam type including fine dressing and polishing to the shape and dimensions as per the approved drawing including cost and conveyance of all materials to work site excluding seigniorage charges, sales and other taxes on all materials and including all labour charges, operational, incidental and accidental charges etc. complete for finished item of work. as per Silpi SSR with over head and contractor profit etc., complete

Ornamental plastering 25mm to 40mm thick with base pleastering 12mm to 20 mm in C.M. (1:3) and top finishing 12mm thick with C.M. (1:2) to bring the required ornamentation including fine rendeing with neat cement cost and conveyance of all materials, labour charges, all incidental and operational charges curing etc., complete for finished item of work excluding seinorage charges, sales and other taxes on all materials in site for external surface as per approved drawings and as directed during execution including preparation and fixing precast pillars, Kudam, Palakai, Vedika, Lathalu in Uttara Elduhakam, Pothikas, Nasigudu, Pupha Puskala, Adihishtanam whereever necessary and including overheads and contractors profit charges, etc., complete for finished item of work.

(a) 2nd Class Upto Stambhavargam Level

(b) 1st Floor 1st class verity

Ceiling plastering 12mm thick single coat in CM (1:3) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and including overheads and contractors profit charges etc., complete for finished item of work. (SS 901,903 & 904)

Plastering 20mm thick single coat in CM(1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and including overheads and contractors profit etc., complete for finished item of work. (SS 901,903 & 904)

Supply and fixing of best teak wood ornamental door shutters with best teak wood frame of 50 mm thick, padmam of 62.5 mm thick and fixing of best teak wood rear flank of 40 mm thick as per the standard temple design including cost and conveyance of teak wood, all fixtures, bolts and nuts etc to work site excluding sales and other taxes on all materials 5 and including preparation charges for frames, shutters as per standard design, polishing, fixing of shutters in position, special type hinges, locking arrangements, brass tower bolts, Brass heavy type aldrog etc., complete (single padmam with padmarekulu and plain frame) asper Silpi SSR including over head and contractor profit etc, complete for finsihed item of work.

Supplying and fixing of Metal Brass Stoopi with Stoopi dandam, Bramha randram stone (Gandhapu-Raie) inlcuding cost and conveyance of all materials and labour charges etc. complete as per Silpi SSR 2012.

Providing cement Vigrahams using cement, sand, steel reinforcement, Iron mesh, Brick bats, flat tile etc. including cost and conveyance of all materials and all labour charges, excluding seigniorages, sales and all other taxes on all materials and scaffolding charges but including overheads & contract profit etc., complete for finished item of work asper Silpi SSR 2018

(a) Rajavigrahams - 4H Sitting

(c) Standing 2 Hands

Flooring with Cheery red 18-20mm thick upto 2.43m granite stone slabs (i.e. of shades like paradiso / bala flower / copper silk/laka red / lavender blue) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:8), 20mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement, sand, water, granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads, polishing, charges and excluding seigniorage charges, sales and all other taxes on all materials, cost of base coat and including overheads & contractors profit etc., complete for finished item of work (S.S.701 & special)

Providing cladding to walls with cheery red 18-20 mm thick upto 2.43m (2.43 M) other than black and regular colours, length equal to flooring stones set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching sand and shade to full depth, including cost of all materials like tiles, cement, sand and water excluding seigniorage charges, sales and all other taxes and including overheads & contractors profit etc., complete for finished item of work

Supplying and fixing of scaffolding to structure including cost & conveyance of all materials such as casino poles, Bamboos mats and coir ropes etc., includinding labour charges and including overheads & contractors profit etc, complete for finished item of work as per Silpi 2012.

(a) Up to 20'-0" Height

(b) Above 20'-0" Height

Supply and application of one coat of deco orient base & two coats of acrylic exterior emulsion paint having VOC( Volatile Organnic Compound) content less than 50 grams/litre for exterior walls including cost and conveyance of all materials to size, excluding sales & other taxes, incidental, operational and all labour charges etc, and including overheads & contractors profit etc., complete for finished item of work in all floors.

Earth work excavation for foundations (Manual Means) of buildings, septic tank, sump, compound wall in ordinary soils and depositing on bank with an initial lead of 10m and depth up to 3m including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work excluding seigniorage excluding dewatering charges etc., as per SS 20 B(APSS 308)

Filling with carted coarse sand in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming jincluding cost and conveyance of water to work site and all operaitonal,incidental labour charges, hire charges of T&P etc., excluding seniorage charges and sales & other taxes and including overheads & contractors profit etc., complete for finished item of work (APSS NO.309&310)

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402)

VRCC M-20 grade nominal mix (cement :fine aggreegate: coarse aggregate) corresponding to table 9 of IS456 using 20mm size graded machine crushed hard granite metal (coarse aggreegate) from approved Quarry Including cost and conveyance) of all materials like cement, fine aggregate(sand)coarse aggregate, water etc, to site and including centering and shuttering etc, but excluding seigniorage charges, sales and other taxes on all materials including all operational incidental and labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, and including overheads & contractors profit complete for finished item of work

D). Plinth Beams

F). Roof slab 5" thick

G) Ornamental Sunshade 2-6 'wide

Providing High Yield Strength Deformed (HYSD) (Fe 415 grade as per IS 1786-1979) of different diameters for RCC works including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational labour charges such as cutting, bending, placing in position, tying excluding sales and other taxes on all materials etc., and including overheads & contractors profit complete for finished item of work in all flours. (APSS No.126)

Brick masonry for panel walls in superstructure with CM (1:6) prop: (Cement: Screened sand) using common burnt clay bricks of class as per Table- 1 of IS:1077-1992, Non-Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 35 Kg/Sqcm. including cost and conveyance el all materials like cement, screened sand, bricks, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., and overheads & contractors profit complete for finished item of work. (APSS No. 501 & 504).

Temple Rear Walls

Pial in b/w steps

Ornamental brick work in C.M. (1:5) using common burnt clay bricks prop: (Cement Screened sand) using common burnt clay bricks of class as per Table- 1 of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 50 Kg/Sqcm using bricks, bats and flat tiles including cost and conveyance of all materials like cement, sand, bricks etc to site exluding seigniorage charges, sales and other taxes on all materials excluding scaffolding for construction of masonary but including lift charges and soaking the bricks in clean water atleast an hour immediately before use, including overheads and contractors profit charges, curing, etc., complete for finished item of work as per Silpi SSR-2012.

(a) Upto Shambhavargan Level

(b) Above Shambhavargan Level

Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials and including operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903).

Ceiling Plastering 12mm thick single coat in CM(1:3) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge and including overheads & contractors profit complete etc., complete for finished item of work .(SS 901,903 & 904)

Plastering 20mm thick single coat in CM(1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and including all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and including overheads and contractors profit etc., complete for finished item of work. (SS 901,903 & 904)

Ornamental plastering 25mm to 40mm thick with base pleastering 12mm to 20 mm in C.M. (1:3) and top finishing 12mm thick with C.M. (1:2) to bring the required ornamentation including fine rendeing with neat cement cost and conveyance of all materials, labour charges, all incidental and operational charges curing etc., complete for finished item of work excluding seinorage charges, sales and other taxes on all materials in site for external surface as per approved drawings and as directed during execution including preparation and fixing precast pillars, Kudam, Palakai, Vedika, Lathalu in Uttara Elduhakam, Pothikas, Nasigudu, Pupha Puskala, Adihishtanam whereever necessary and including overheads and contractors profit charges, etc., complete for finished item of work.

a) 2nd class verity upto S V Level

b) 1st Floor 2nd Class verity

Ornamental plastering 25mm to 40mm thick with base pleastering 12mm to 20 mm in C.M. (1:3) and top finishing 12mm thick with C.M. (1:2) to bring the required ornamentation including fine rendeing with neat cement cost and conveyance of all materials, labour charges, all incidental and operational charges curing etc., complete for finished item of work in site for external surface as per approved drawings and as directed during execution including preparation and fixing precast pillars, Kudam, Palakai, Vedika, Lathalu in Uttara Elduhakam, Pothikas, Nasigudu, Pupha Puskala, Adihishtanam whereever necessary and including overheads and contractors profit charges, etc., complete for finished item of work.

(a) Citrakanta Stambham

(b) Providing cement pothikas using cement, sand, steel reinforcement, iron mesh brick bats, flat tiles etc. including cost and conveyance of all materials labour charges, etc. complete. As per silpi SSR 2012.

(c) Ceiling Padmam

(d) Salai (Makarathoranam)

Providing cement Vigrahams using cement, sand, steel reinforcement, Iron mesh, Brick bats, flat tile etc. including cost and conveyance of all materials and all labour charges, excluding seigniorages, sales and all other taxes on all materials and scaffolding charges but including overheads & contract profit etc., complete for finished item of work asper Silpi SSR 2018 Sitting 4 Hands

Supply and fixing of Stain less steel Grills using 304 Grade Stain less steel pipes including cost of pipes, fabrication charges, buffing, polishing, lacquer finish etc., complete.

Flooring with Cheery red 18-20mm thick upto 2.43m granite stone slabs (i.e. of shades like paradiso / bala flower / copper silk/laka red / lavender blue) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:8), 20mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement, sand, water, granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads, polishing, charges and excluding seigniorage charges, sales and all other taxes on all materials, cost of base coat and including overheads & contractors profit etc., complete for finished item of work (S.S.701 & special)

Supplying and fixing of scaffolding to structure including cost & conveyance of all materials such as casino poles, Bamboos mats and coir ropes etc., includinding labour charges and including overheads & contractors profit etc, complete for finished item of work as per Silpi 2012.

Supply and application of one coat of deco orient base & two coats of acrylic exterior emulsion paint having VOC( Volatile Organnic Compound) content less than 50 grams/litre for exterior walls including cost and conveyance of all materials to size, excluding sales & other taxes, incidental, operational and all labour charges etc, and including overheads & contractors profit etc., complete for finished item of work in all floors.

Supply & Fixing of 48" (1200mm) Sweep 5 star rated BLDC (Brush less Direct | Current) Ceiling fan with double ball bearings, input voltage 230V AC converted to 24 V DC, 18 power input not more than 30W, air delivery not less Jthan 220 cubic meter/min and a minimum service value of 7.0, with remote Jand without Regulator, including all labour charges, overheads & contractor profit etc., complete .Makes: Atomberg(GV2 )/ Halonix(Plasma) /Havells (Efficiencia Neo)/ Crompton (EN Groove)/Superfan(E28 1)/ RJP(Ecowisexuding sales & other taxes etc.,

Supply and fixing of concealed box PVC/MS with hook for fan Supply and fxing PVC/MS galvanished Fan hook box with hook including all Labour charges etc., complete. Excluding sales &s other taxes but inchuding overhead & contractor profit etc.exluding sales & other taxes, etc., complete

Supply and fixing of 20-24W, not less than 1100mm length LED batten light with extruded aluminum housing and polycarbonate cover, input voltage AC 220-260 Volts, with high power LEDs, having System Efficacy of >=100 lumens/watt, PF>0.9, Surge protection: 2KV, THD70, etc., complete with earth connection and not less than two years warranty along with Tw/PVC round blocks, supply of No:8 screws of 35mm, supply of PVC rawl plugs & supply of ISI marked 23/0060 twin core twisted/ Flat heavy copper cable wire.. Makes: As per list of recommended brands as category including loverhead & contractor profit etc.exluding sales & other taxes, etc., complete

Supply and fixing of 9W LED Lamp input voltage 90 to 300V, Color temperature 3000k - 6500k, Beam angle 170 - 220 degrees, B22 base, along with supply of batten holder/; slanting holder ISI Marked in lieu of ceiling rose of light point complete with all connections and all labour charges with 9W LED bulb (for new installation). including overhead & contractor profit etc.exluding sales & other taxes, etc., complete.

Supply and fixing of 2 Nos 16A/6A, 1 way, Combi Socket Modular Socket with shutter ISI Marked and 2 Nos 6A / 10A, 1 Way, 1 Module, Modular Switch ISI mark on existing Modular board including earth connection and all labour charges etc., complete on wall. Seperate Modular Switch board inchuding overhead &s contractor profit etc.exluding sales & other taxes, etc., complete

Supply of run of 2 of 22/0.3mm (1.5 Sq.mm) ISI marked FRLS/ FRLS-H / HFFR/ZHFR PVC insulated flexible copper cables 1 100V grade as per IS: 694/1990 & IS:17048/2018 specification for copper cable in existing pipe for mains inlcuding all labour charges etc., including overhead & contractor profit etc.exluding sales & other taxes, etc., complete.

Supply and wiring with 2 run of 1.5 Sq.mm ISI marked FRLS/ FRLS-H/HFFR /ZHFR PVC insulated flexible copper cables 1100V grade as per IS: 694/1990 & 1S:17048/20 18 specification for cable in existing pipe with supply of 6A/10A 1 way I module Modular Switch, 3 Plate copper Jumbo Ceiling Rose and Modular switches with cover plate and GI switch box including all labour charges etc., complete for light, bell, fan and exhaust fan points,,including overhead & contractor profit etc.exluding sales & other taxes, etc., complete. Non-Residential Buildings. [Makes as per approved list in prevailing SOR under Category I for Switches/ Sockets and Category-I for Copper Cables]

Supply and fixing 4 Way SPN Distribution board with IP-43 protection (Metal Door) suitable for I No. 40 A single phase ELCB / RCCB/DP Isolator as incomer and 2 Nos. 6-32 OA 10kA SP MCBS as outing going including internal connection and labour charges for surface/flush mounting etc., including overhead & contractor profit etc.exluding sales & other taxes, etc., complete.

Providing independent earthling by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class Gl pipe of 12.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes inchuding filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete for small quarters, including overhead & contractor profit etc.exluding sales &s other taxes,etc., complete.

Supply and Fixing ot 25mm outer dia (1 60 -1.80) mm thickness medium grade with 0537 part 3 igid PVC Conduit with all accessories fixing on chromium plated Junction boxes, 25mm PVC bends, 8 or 9 module hot dip galvanized metal ee es for switches 1or Light, Fan and separate plug point including all labour charges etc,Incuding overhead & contractor. profit etc.exluding sales & other

Supply and run of 2 of 36/0.3mm (2.5 Sq.mm) and 1 Run of 14 /0.3mm (1.0 Sg.mm) IS! markcd FRLS/ FRLS-H/ HFFR/ZHFR PVC insulated flexiblc copper cables 1100V gradc as per IS: 694/1990 & IS:17048/2018 spccification for copper cable in existing pipe for mains including overhecad & contractor proft ctc.cxluding sales & other taxcs, ctc., completc.

Supply and run of 2 of 4 Sq mm ISI marked FRLS/ FRLS-H / HFFR / ZHFR PVC insulated flexible copper cables 1100V grade as per IS: 694/1990 & 1S:17048/20 18 spccification for copper cable in existing pipe for mains including overhead & Contractor profit etc.exluding sales & other