Construction of Health Sub Center at Dhanag Tehsil

Amount

Excavation in foundation, trenches etcetera in earth work involving all classification of soil such as pick work, pick jumper work, blasting work, soft or hard rocks including chiseling/wedging out of rocks where blasting work is prohibited or any other mixed variety of intermediate soil, dewatering and removal of slush if arrisen during course of construction and lifts upto all heights including stacking the excavated soil not more than three meters clear from the edge of the excavation and then returning the stacked soil in 15 cm (fifteen centimeters) thick layers when required into plinths, sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus excavation earth within all leads,lifts by any mode of transportation and other incidental, as per the direction and entire satisfaction of Engineer-In-Charge. Any loss to the private and public property during course of construction shall be absolute responsibility of the contractor. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Filling in plinth with sand under floor including watering, ramming, consolidating and dressing complete as per PWD specification and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Excavation in drains and channels etc. in earth work in all classification of soil, such as pick work, jumper work, pick jumper work, blasting work, hard and soft blasting, saturator soil including chiseling or any other mixed variety of soil, lift upto any heights, stacking the excavated soil for all heights from the edge of excavation and then returning the stacked soil in 15cm (Fifteen centimeter) layer when required into plinths sides of foundations etc. Consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as directed by the Engineer- Incharge, within all leads, lifts of materials and other incidentals. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing form work with steel plates of 3.15mm (three decimal one five milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling not exceeding 4 mtrs. and removal of the same for in-situ reinforced concrete and plain concrete work in foundation,. Footings bases of columns and mass concrete including entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing form work with steel plates of 3.15mm (three decimal one five milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling not exceeding 4 mtrs. and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs, landings and the like floor in all floor level. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing form work with steel plates of 3.15mm (three decimal one five milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling not exceeding 4 mtrs. and removal of the same for in-situ reinforced concrete and plain concrete work in columns, pillars , posts and struts, square, rectangular, polygonal in all floor level including entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing form work with steel plates of 3.15mm (three decimal fifteen milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling not exceeding 4 mtrs. and removal of the same for in-situ reinforced concrete and plain concrete work in beams cantilevers, girders lintels, sides, and soffits of beams haunchings, cantilevers bressumers and lintels upto all depths. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing form work with steel plates of 3.15mm (three decimal fifteen milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling not exceeding 4 mtrs. and removal of the same for in-situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors all level and walls up to any width. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing form work with steel plates of 3.15mm (three decimal fifteen milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling not exceeding 4 mtrs. and removal of the same for in-situ reinforced concrete and plain concrete work in stairs cases with slopping or stepped soffits, excluding, landing. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing form work with steel plates of 3.15mm (three decimal fifteen milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling not exceeding 4 mtrs. and removal of the same for in-situ reinforced concrete and plain concrete work in Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and laying cement concrete 1:4:8 (One cement isto four sand isto eight aggregate) graded crushed/broken stone aggregate 40mm (fourty milimeter) nominal size mechanically mixed and curing complete, excluding cost of form work in foundation and plinth. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and laying cement concrete 1:6:12 (One cement isto six sand isto twelve aggregate) graded crushed/broken stone aggregate 40mm (forty milimeter) nominal size mechanically mixed and curing complete, excluding cost of form work in foundation and plinth. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and laying mechanically mixed and vibrated plain cement concrete work grade M-20 with cement contents and not less than 320 Kg/m3 (three hundred twenty) kilograme per cubic meters and curring complete. Excluding the cost of form work in foundation and plinth including entire carriage of material with all lead and lifts and other incidental as per specification, approved drawings design and as directed by Engineer-in-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and laying mechanically mixed and vibrated reinforced cement concrete work grade M-20 design mix to obtain the minimum compreasive strength of M-20 N/mm2 with cement contents not less than of 330kg/m3 (three hundred thirty kilogramme per cubic metre) excluding cost of form work and reinforcement for reinforced concrete work in foundation footing, basis of columns and the like mass concrete in all depth / thickness upto all floor level and curing complete including entire carriage of material within all leads, lifts and other incidental as per approved specificatioin, drawing, design as per direction of Engineer-in-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and laying mechanically mixed and vibrated reinforced cement concrete work grade M-20 design mix to obtain the minimum compressive strength of M-20 N/mm2 with cement contents not less than of 320kg/m3 (three hundred twenty kilogramme per cubic metre) excluding cost of form work and reinforcement for reinforced concrete work in Walls (any thickness but not less than 0.10 metre thickness) including attached pilasters buttersses,plinth and string courses etc. from foundation upto all floor level and curing complete including entire carriage of material within all leads, lifts and other incidental as per specification, approved drawing, design and as directed by Engineer-in-Charge.The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and laying mechanically mixed and vibrated reinforced cement concrete work grade M-20 design mix to obtain the minimum compressive strength of M-20 N/mm2 with cement contents not less than of 320kg/m3 (three hundred twenty kilogramme per cubic metre) excluding cost of form work and reinforcement for reinforced concrete work in suspended floor, roofs, landing and shelves and their support balconies beams girders bressumers and cantilevers upto floor all level and curing complete including carriage of material within all leads, lifts and other incidental as per approved drawing, specification, design and as directed by Engineer-in-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and laying mechanically mixed and vibrated reinforced cement concrete work grade M-20 design mix to obtain the minimum compreasive strength of M-20 N/mm2 with cement contents not less than of 330kg/m3 (three hundred thirty kilogramme per cubic metre) excluding cost of form work and reinforcement for reinforced concrete work in foundation footing, basis of columns and the like mass concrete in all depth / thickness upto all floor level and curing complete including entire carriage of material within all leads, lifts and other incidental as per approved specificatioin, drawing, design as per direction of Engineer-in-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Square rubble masonry coursed with hard stone of approved quality in foundation and plinth including racking out joints in cement mortar 1:5 (one cement isto five sand) and curing complete including carriage of materials within all leads and lifts complete in all respect as per the direction of Engineer-in-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and laying mechanically mixed and vibrated reinforced cement concrete work grade M-20 design mix to obtain the minimum compressive strength of M-20 N/mm2 with cement contents not less than of 320kg/m3 (three hundred twenty kilogramme per cubic metre) excluding cost of form work and reinforcement for reinforced concrete work in suspended floor, roofs, landing and shelves and their support balconies beams girders bressumers and cantilevers upto floor all level and curing complete including carriage of material within all leads, lifts and other incidental as per approved drawing, specification, design and as directed by Engineer-in-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and laying mechanically mixed and vibrated reinforced cement concrete work grade M-20 design mix to obtain the minimum compressive strength of M-20 N/mm2 with cement contents not less than of 320kg/m3 (three hundred twenty kilogramme per cubic metre) excluding cost of form work and reinforcement for reinforced concrete work in columns, pillars posts and struts upto floor all level and curing complete as per specification, approved drawing, desing, including carriage of material within all leads, lifts and other incidental and as directed by Engineer-in-Charge.The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and laying mechanically mixed and vibrated reinforced cement concrete work grade M-20 design mix to obtain the minimum compressive strength of M-20 N/mm2 with cement contents not less than of 320kg/m3 (three hundred twenty kilogramme per cubic metre) excluding cost of form work and reinforcement for reinforced concrete work in stair cases (except spiral stair cases) excluding landing but including preparing of top surface and finishing of nosing upto all floor level and curing complete including carriage of material within all leads, lifts and other incidental as per approved specification, drawing design and as directed by Engineer-in-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing tor steel of Sail, Tisco reinforcement for reinforced cement concrete work including bending, binding cutting strengthening including placing in position complete, cost of binding wire up to floor all level as per specification, approved drawing, design as per entire satisfaction of Engineer-In-Charge including carriage of material with all lead and lift and other incidental. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing in RCC work smooth finishing of the exposed surface with cement mortar 1:3 (one cement isto three sand) including carriage of material within all leads, lifts and other incidental as per approved specification, drawing design and as directed by Engineer-in-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and laying reinforced cement concrete work grade M-20 design mix to obtain the minimum compressive strength of M-20 N/mm2 with cement contents not less than of 320 Kg/m3 (three hundred twenty kilogramme per cubic metre) mechanically mixed and vibrated and curring complete for reinforced cement concrete in chajjas for all thickness in all floor level up to all heights including finishing the exposed surface with cement motor 1:3 (one cement is to three sand) to give a smooth and even surface including centiring, form work but excluding the cost of reinforcement. As per specification, approved drawing, desing including entire carriage of material with in all lead and lift and other incidential as directed by Engineer-in-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement : six sand : twelve graded stone aggregate 20mm (twenty) millimeter nominal size mechanical mixed in cement mortor 1:6 (one cement six sand) including curring and carriage of material within all leads and lifts and other incidental as per approved specification, drawing, design and as directed by Engineer-in-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Stone filling under floors including watering, ramming, consolidating and dressing complete including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Second class brick work using common burnt clay building bricks in cement mortar 1:6 (one cement isto six sand) in super structure up to any floor level and curring complete including carriage of material with in all lead and lift and other incidental as per approved specification, drawing and as directed by Engineer in Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and laying precast cement concrete hollow block masonry with cement concrete blocks of size 40cm x 19cm x20 cm (forty by ninteen by twenty centimeter) i/c quion block jamb blocks and closers etc. made of cement concrete 1:3:6 (one cement isto three sand isto six graded stone aggregate 20mm nominal size) laid with cement mortar 1:6 (one cement isto six sand) i/c curing complete in super structure upto floor two level and curring complete including carriage of material with in all lead and lift and other incidental as per approved specification, drawing and as directed by Engineer in Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and laying precast cement concrete block masonry in partition wall 10 cm (ten centimeter) thick with hollow cement concrete blocks of approved size including quion block jamb blocks and closers etc. made of cement concrete 1:3:6 (one cement isto three sand isto six graded stone aggregate 20mm (twenty milimeter) nominal size) laid with cement mortar 1:6 (one cement isto six sand) i/c curing complete in super structure upto floor two level and curring complete including carriage of material with in all lead and lift and other incidental as per approved specification, drawing and as directed by Engineer in Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing flush door shutters 40 mm thick including black enamelled M.S. butt hinges interior grade, commercial type, core of black-board construction with frame of first class hard wood and well matched commercial ply veneering with vertical grains of cross bands and face veneers on both faces of shutters including carriage of material with in all lead and lift and other incidental as per approved specification, drawing and as directed by Engineer in Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 19mm thick (Ninteen milimeter) thick commericial board water proof shutter of century ply / kit ply / dura ply / Morino ply (ISI marked) with hard wood edging for up boards i/c fixing with nickel plated piano hinges with screws etc complete as per PWD Specification drawing and design. including carriage of material within all leads and lifts and other incidental as per approved specification, drawing, design and as directed by Engineer-in-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 19mm thick (Ninteen milimeter) thick commericial board water proof shutter of century ply / kit ply / dura ply / Morino ply (ISI marked) with hard wood edging in shelves/box for cup board with butt joints & fixing with nails & screws etc complete as per PWD Specification drawing and design. including carriage of material within all leads and lifts and other incidental as per approved specification, drawing, design and as directed by Engineer-in-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 6 mm (Six millimetre) thick ply wood lining with butt jointing and nails (frame work and cove fillets to be measured and paid for separately) as per PWD specification drawing and design. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 40 mm (Forty millimetre) thick second class Deodar wood wire gauge shutters using galvanised MS wire gauge of IS gauge designation 85G with wire of dia 0.56 mm (Zero decimal five six millimetre) for doors, windows and clearstory windows including bright finished black enamelled iron hings with necessary screws as per PWD specification drawing and design. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing anodized aluminum sliding door bolt, anodized transparent or dyed to required colour and shade with bolts and nuts, screws etcetra complete. 300x16mm (Three hundred into sixteen milimeter) size. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing anodized aluminum sliding door bolt, anodized transparent or dyed to required colour and shade with bolts and nuts, screws etcetra complete. 250x16mm (Two hundred fifty into sixteen milimeter) size. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing anodized aluminum tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetra complete 250x10mm (Two hundred fifty into ten milimeter) size. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing anodized aluminum tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetra complete 100x10mm (Two hundred into ten milimeter) size. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 65x35mm. (Sixty five into thirty five)special quality bright finished brass cup board locks or wardrobe locks with six levers including necessary screws etc. complete. (Indian make of approved quality) as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 100mm (hundred milimeter) bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete (Indian make of approved quality) as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 150mm (one hundred fifty milimeter) oxidized M.S. double acting spring hinges with necessary screws. (Indian make of approved quality) as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 200mm (two hundred milimeter) oxidized MS (mild steel) hooks and eyes as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing oxidized M.S. fan light catch with necessary screws etc. complete as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 8 mm (eight milimeter) thick Cement bonded partical board ceiling of approved quality with butt jointing and nail (frame work and cover fillets to be paid for separately. Particle board (bwp phenol bonded exterior/interior grade) as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 12mm thick 150mm wide (twelve milimeter thick one hundred fifty milimeter wide) pelmet with 25 mm (twenty five milimeter) diametre wooden curtain rods in first class deodar wood and brackets including fixing 25x3mm M.S. flat(twenty five by three milimeter mild steel flat) at 10 cm. (ten centimeter) Long and plugs etc. complete as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing plain grills of required pattern in steel frames of windows etc. with M.S. flats, square or round bars with round head bolts and nuts or by screw. as per PWD specification drawing and design. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and laying 10 mm (ten milimeter) thick antiskid water proof stain and impact resistant heavy duty vetrified tiles (600x600mmx10mm) (six hundred into six hundred into ten milimeter) of Kajaria / Swastik / Somany/Bell Tiles in grey/coloured of required shade in skirting up to all heights on 12mm thick cement mortar 1:3 (one cement isto three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and laying Duro Stone vetrified tiles (300x300mmx8mm) (three hundred into three hundred into eight milimeter) of Kajaria / Swastik / Somany/Bell Tiles in grey/coloured of required shade in skirting up to all heights on 12mm thick cement mortar 1:3 (one cement isto three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and laying 200x300mm / 300x300mm (two hundred into three hundred / three hundred into three hundred) millimeter white glazed tiles 6 mm (Six milimeter) thick in skirting risers of steps and dado up to all heights of Kajaria / Swastik / Somany / Bell on 12 mm (tweleve milimeter) thick with cement mortar 1:3 (one cement isto three sand) and jointed with cement slurry with pigment to match the shade of tiles as required complete as per approved specification, drawing and design including entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

50 mm (fifty milimeter) thick Cement concrete flooring 1:2:4 (one cement isto two sand isto four graded stone aggregate 20 mm (twenty milimeter) nominal size laid in one layer finished with a floating coat of neat Cement as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Cement plaster skirting (upto 30cm (thirty centimeter)height) with cement morter 1:3 (one cement isto three sand) finished with a floating coat of neat cement including rounding of junction with floor as per approved specification, drawing and design including entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and laying 20 mm (twenty milimeter) thick polished white makrana marble work (table rubbed and polished) in flooring 20mm (twenty milimeter) thick base in cement mortar 1:3 (one cement isto three sand) including jointing with cement mortar 1:2(one white cement isto two marble dust) with an admixure of pigment to match the shade of the marble as per PWD specification including carriage of material within all leads and lifts and other incidental as per approved specification, drawing, design and as directed by Engineer-in-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 0.60 mm (zero point sixty) millimeter thick prepainted steel sheeting of TATA / SAIL Jindal steel in roofing (ISI marked Z120) over steel trussed, pre painted galvanized steel and hot dip metallic zink coat sheet with top coat of regular modified polyster (RNP) organic coating of 20 micron over 5 micron and back coating of polyster 5 micron over 5 micron primer coating including fixing necessary iron J or L hooks, bolt nuts 6mm (six) millimeter dia with prepainted limpat and rubber washers complete with all accessories as per approved speficiation drawing and design and as directed by Engineer-in-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 0.60mm (zero point six zero) millimeter pre-painted sheet ridge or hips 60cm (sixty centimetre) of TATA / Sail / Jindal steel roofing with hot dipped metalic zinc coat sheet with top coat of regular modified polyster (RMP) organic coating of 20 micron over 5 micron and back coating of polyster 5 micron over 5 micron primer coating including fixing necessary iron J or L hooks, bolt nuts 6mm (six) millimeter dia with prepainted limpat and rubber washers complete with all accessories as per approved speficiation drawing and design and as directed by Engineer-in-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing pre-painted sheet valleys 90cm (ninety centimetre) over all of kotar metal single skin trapezoidal profiled sheet 0.60cm (zero point sixty centimetre) thickness sheet in roofing of TATA / Sail / Jindal steel roofing with hot dipped metalic zinc coat sheet with top coat of regular modified polyster (RMP) organic coating of 20 micron over 5 micron and back coating of polyster 5 micron over 5 micron primer coating including fixing necessary iron J or L hooks, bolt nuts 6mm (six) millimeter dia with prepainted limpat and rubber washers complete with all accessories as per approved speficiation drawing and design and as directed by Engineer-in-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 150mm(one hundred fifty milimeter) wide 450mm (four hundred fifty millimeters) deep over all semicircular plain G.I. sheet gutter with iron brackets 40x3mm size bolts and nuts and washers etc. including making necessary connections with rain water pipe complete as per design 0.60mm thick sheet including carriage of material within all leads and lifts and other incidental as per approved specification, drawing, design and as directed by Engineer-in-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing on wall face PVC (D-plast) rain water pipes of supreme / finolex / princ working pressure not less than 4.5 kg (four decimal five kilogram) per square centimeter including filling the joints with approved adhesive complete 110 mm (one hundred ten milimeter) dia. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing on wall face PVC (D-plast) supreme / pinolex / princ of accessories for rain water pipes including filling the joints with approved adhesive complete 110mm (one hundred ten milimeter) dia PVC plain bend. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing on wall face PVC (D-plast) accessories for rain water pipes including filling the joints with approved adhesive complete 110mm (one hundred ten milimeter) dia plain shoes as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing plaing M.S. B.P. sheet 2mm (two) millimeter thick in evers board/ Facia / Sofit / Ceilling including cutting fixing jointing with /electric welding to steel roofs members and applying a coat of red lead primer complete as per PWD specification (frame work is to be measured paid for separately). The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position in trusses as & trussed purline in buildings and the like work including cutting hoisting fixing in position & applying a priming coat of red lead paint complete including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing factory made double ISI marked No. IS 1003 steel shutter window side hung (one glazed and other wire gauge) of standred rolled-steel section joining metered welded with manufactured to relevent ISI standred specification with 16 X 3.15 mm (sixteen by three piont fifteen) lugs 20 cm (twenty centimeter) long embeded in cement concrete block 15x10x10 cm (fifteen by ten by ten centimeter) size of 1:3:6 (one cement isto three sand isto six graded stone aggrigate 20 mm (twenty milimeter) nominal size) or with wooden/ steel plugs and screws or glass panes with fixed clips or with bolts and nuts as required and iron fitting including providing fixing of glass panes with special putty of glazed side of shutter and wire gauge of designation 85G (eighty five gauge) with metal beading on other side complete priming coat of red lead paint complete including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing steel glazed windows and ventilators of standerd rolled steel sections ,joints mitred and welded with 16x3.15 mm (Sixteen by three point one five milimeter ) lugs 10 cm. (ten centimeter ) long embedded in cement concrete blocks 15 cmx10cmx10cm (fifteen centimeter by ten centimeter by ten centimeter ) size of 1:3:6(one cement isto three sand isto six graded stone aggregate) 20mm nominal size(twenty milimeter) or with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fittings,including providing and fixing of glass panes with glazing clips and special metal sesh putty of approved make complete including applying a priming coat of red lead paint in fixed steel windows as per PWD specification. The rates are including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing steel glazed top hung windows and ventilators of standerd rolled steel sections ,joints mitred and welded with 16x3.15 mm (Sixteen by three point one five milimeter ) lugs 10 cm. (ten centimeter ) long embedded in cement concrete blocks 15 cmx10cmx10cm (fifteen centimeter by ten centimeter by ten centimeter ) size of 1:3:6(one cement isto three sand isto six graded stone aggregate) 20mm nominal size(twenty milimeter) or with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fittings,including providing and fixing of glass panes with glazing clips and special metal sesh putty of approved make complete including applying a priming coat of red lead paint as per PWD specification.The rates are including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing angle iron cupboard frames manufactured from M.S.Angle iron section 25X25X5mm thickness including hinges jamb,lock jamb,beed and if required angle thrashold of mild steel angle 25X25 mm welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb including steel butt hinges 2.5 mm thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after preteatment of the surface as per PWD specification drawing and design. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing M.S.fan clamp type -1 of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C slab during laying including painting the exposed portion of loop,all as per standard design complete and as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing angle iron door,window,clerestory window frames (Single rebate) manufactured from M.S. Angle section of 40x40x6mm (forty by forty by six milimeter ) and M.S. Flat 50X25mm (fifty by twenty five milimeter) thickness including hinges, jamb, lock, jamb, beed and if required thrashold of MS flat 50 X 5 mm (fifty by five milimeter)welded or regidly fixed by mechanical means lugs with spit ends and tails to each jamb including steel but hinges 2.50mm (two point five zero milimeter) thick with a provision of locking arrangement and shock absorber as specified and applying a coat of approved steel primer after pre-treatment of the surface as per PWD specification, drawing and design. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing M.S. Channels for doors, window, frame manufactured from M.S. Section 75x40x6mm (seventy five by fourty by six milimeter) with M.S. Flat 75x4mm (seventy five by four milimeter) in combination as per drawing and design including hinges jamb including iron butt hinges 2.5mm (two point five milimeter) thick with a provision of locking arrangement and sock observer as specified and applying a coat of approved steel primer after pretreatment of the surface as per PWD specification, drawing and design. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing railing for stair case having balasterof 19 X 19 mm (ninteen by ninteen milimeter) solid square bar with a clear height of 85 cm (eighty five centimeter) and 60 cm c/c (sixty centimeter center to center) embedded in cement concrete steps and welded with electric gas at top alongwith handrail of hollow mild steel rectangular pipe 60x40mm (sixty by fourty milimeter) (ISG-16) vertical baluster welded or jointed with each other with two row of mild steel flat 50x5mm (fifty by five milimeter) as per HPPWD specifications or as directed by Engineer-in-charge including applying a primer coat of with steel primer.The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Applying priming coat over new steel & other metal surfaces with ready mixed priming paint brushing red lead,Red-oxide/zinc oxide chrome after & including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete. including carriage of material within all leads and lifts and other incidental as per approved specification, drawing, design and as directed by Engineer-in-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Painting two coats (excluding priming costs) on new steel and other metal surfaces with enamel paint after than white of asian / nerolac to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters complete including carriage of material within all leads and lifts and other incidental as per approved specification, drawing, design and as directed by Engineer-in-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Painting two coats (excluding priming costs) on new steel and other metal surfaces with white readymixed paint of asian / nerolac other than white to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters complete including carriage of material within all leads and lifts and other incidental as per approved specification, drawing, design and as directed by Engineer-in-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Applying priming coat over new wood and wood based surfaces with ready mixed paint brushing wood pink primer after and including preparing the surface by throughly cleanin oil, grease, dirt and other foreign sand papering and knotting complete including carriage of material within all leads and lifts and other incidental as per approved specification, drawing, design and as directed by Engineer-in-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Painting two coats (excluding priming costs) on new wood and wood based surfacess with white readymixed paint of asian / nerolac other than white to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters complete including carriage of material within all leads and lifts and other incidental as per approved specification, drawing, design and as directed by Engineer-in-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Applying priming coat on new concrete/masonry/asbestos/cement/plastered surfaces surfaces with ready mixed primer after & including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete. including carriage of material within all leads and lifts and other incidental as per approved specification, drawing, design and as directed by Engineer-in-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete as per PWD specification, drawing and design including entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including t horoughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface complete as per PWD specification, drawing and design including entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

6mm (six millimeter) cement plaster 1:3 (one cement isto three sand) in ceiling complete including curing complete as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

15mm (fifteen milimeters) thick cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty milimetewrs) in girth, in rough side with cement mortar 1:6 (one cement isto six sand) complete including curing as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

15mm (fifteen milimeter) thick cement plaster in single coat on the fair side of brick/concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty milimeters) in girth, in fair side with cement mortar 1:6 (one cement isto six sand) complete including curing as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

15mm (fifteen milimeters) thick cement plaster in single coat on the fair side of brick/concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty milimetewrs) in girth, in rough side with cement mortar 1:3 (one cement isto three sand) complete including curing as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

White washing with lime on undecorated wall surfaces two coats to give an even shade including throughly brooming the surface to remove all dirt dust mortar dirt and other foreign matter as per PWD specification, drawing and design including entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surfaces(two coats)to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials as per PWD specification, drawing and design including entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing plinth protection 75mm (seventy five milimeters) thick bed dry brick / stone aggregate 40mm (forty milimeters) nominal size with rammed and consolidation and grouted with fine sand including prepared fround curing complete as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing plinth protection 50mm (fifty milimeters) thick cement concrete 1:3:6 (one cement isto three sand isto six aggregate) 20mm (twenty milimeters) nominal size cushed/broken stone aggregate including finishing the top surfaces of concrete smooth including curing complete as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Construction course rubble hammer dressed ‘U’ shape open surfaces drain with side wall 15x22cms ( fifteen into twenty two centimeters) in cement mortar 1:6 (one cement isto six sand) and inside plastering with cement plaster 1:3 (one cement isto three sand) including earth work and laying 10cm (Ten centimeters) cement concrete in 1:5:10 ( one cement isto five sand isto ten aggregate) 40mm (forty milimeters) nominal size and 7.5cm (seven decimal five centimeters) cement concrete 1:2:4 (one cement isto two sand isto four aggregate) 20mm (twenty milimeters) nominal size and finished with a floating cost of neat cement complete as per standard drawing and design including curing complete as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and laying 20mm (Twenty millimeters nominal bore/diameters to galvanized mild steel tubes (medium grade) in tenches including all tube fittings such as nipples, elbows, unions, tees and clamps (earth work trenches paid for seperately) complete as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and laying 20mm (Twenty millimeters) nominal bore/diameters to galvanized mild steel tubes (medium grade) of Jindal / TATA in tenches including all tube fittings such as nipples, elbows, unions, tees and clamps (earth work trenches paid for seperately) including within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing to wall ceiling and floor galvanised mild steel tubes 15mm (fifteen milimeter) nominal bore (Medium grade) tube fitting and clamps including making good the wall, ceiling and floor complete as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing PVC plain bend of Phenolex / Vectus/ Reliance 110 mm dia (One hundred ten milimeter diameter) including fixing with approved adhesive etc.complete as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing PVC plain TEE of Phenolex / Vectus/ Reliance 110 mm dia (One hundred ten milimeter diameter) including fixing with approved adhesive etc.complete as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes of Phenolex / Vectus/ Reliance 75mm dia (seventy five milimeter diameter) including fixing with approved adhesive etc. complete. including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes of Phenolex / Vectus/ Reliance 110 mm dia (One hundred ten milimeter diameter) including fixing with approved adhesive etc. complete. including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing PVC single equal plain branch of Phenolex / Vectus/ Reliance 75mm dia (seventy five milimeter diameter) including fixing with approved adhesive etc. complete including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing PVC single equal plain branch of Phenolex / Vectus/ Reliance 110 mm dia (One hundred ten milimeter diameter) including fixing with approved adhesive etc. complete including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing PVC collars of Phenolex / Vectus/ Reliance 75mm dia (seventy five milimeter diameter) including fixing with approved adhesive etc. complete.including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing PVC collars of Phenolex / Vectus/ Reliance 110 mm dia (One hundred ten milimeter diameter) including fixing with approved adhesive etc. complete.including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing PVC cowl of Phenolex / Vectus/ Reliance 110 mm dia (One hundred ten milimeter diameter) including fixing with approved adhesive etc. complete.including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing 100mm nominal size diameter M.S. stay and clamps for sand cast iron / cast (spun) iron pipes complete including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing 110mm x 90mm (one hundred ten into ninty millimetre) nominal size PVC floor trap with self cleaaning design of Phenolex / Vectus/ Reliance with approved design complete including cost of cutting making good in the work of floor complete including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing vitreous china water closet squatting pan (Indian Type W.C. Pan) big pan No 20090 of size 53x41mm (fifty three by forty one millimeter) with low lewel PVC dual flushing Cistren of CERA / Hindware / Jaguar (earth work, bed concrete, foot rest and trap to be measured and paid for separately) Orrissa Pattern including entire carriage of materials within all leads and lifts as per direction of Engineer-in-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 100mm (One hundred millimeter) size ‘P’ or ‘S’ trap for water closet (squatting pan) including jointing the trap with the pan and soil pipe in cement mortar 1:1 (one cement : one sand) sand cast iron including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing PTMT/Coloured White high density polyethylene / poly propylene 10 (ten) litres capacity ( full flush) European standard control low level flushing cistern of Hindware / CERA / Commondar / Diplomat with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm (fifteen milimeter) nominal size PVC ball valve with polythene float, with push button, couplings for connections with inlet, outlet and over flow pipe, 40mm (forty milimeter) dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing vitreous china wash basin of 550x400mm (five hundred fifty into four hundred milimetre) of delta No. 10010 of Hindware / CERA / Jaguar with double hole for pillar tap with C.I. or M.S. brackets painted white i/c cutting holes and making good the same including fitting (Flat back) including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing Stainless steelwashbasin of diamond / AMC / UNIK standard ISI make 550x400mm (five hundred fifty by four hundred milimeter) diamond model code No. WB-2116 complete with C.I. or M.S. brackets painted white including cutting hole in wall and making good the same including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing stainless steel kitchen sink of diamond / AMC / UNIK standard ISI make 610 x460 mm (six hundred ten by four hundred sixty milimeter) with bowl depth 200 mm (two hundred milimeter) with drain board and C.P. waste with C.I. or M.S. Brackets painted white including cutting holes and making good the same but excluding fitting including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 32mm (Thirty two milimetres) diameters C.P. brass waste (Heavy duty make ISI marked) for wash basin or sink within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 100mm (hundred milimetres) nominal size diameters CP iron grating for nalhni trap, within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 600mmx450mm (six hundred millimeter into four hundred fifty millimeter) bevelled edge mirror of Atul / Modi Guard /Goldenfish mounted on 6mm (six millimeter) thick A.C. Sheet or water proof sheet and fixed to plugs with C.P. screws and washers including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing C.P. Brass Towel rail of Kingstone / Jal / ESS size600mm x 20mmm (six hundred by twenty milimeter) complete with C.P. Brass brackets fixed to plugs with C.P. Brass screws complete within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing chromium plated brass soap dish of Kingstone / Jal/ ESS with C.P. brass brackets fixed to cleats with C.P. brass screws, within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing C.P. Brass shower rose with 15mm or 20mm inlet 150mm dia of Kingstone / Jal / ESS, within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 15mm (Fifteen milimetres) diameters C.P. brass bib tap with capstan head, of Kingstone / Jal / ESS, within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing C.P. brass pillar tap with capstan head 15mm (fifteen millimetre) dia (Heavey duty makes of Kindston Gem / Parko / Jal / ESS / Jaguar / Sciko ISI marked No. 8931 & 8934) including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 15mm (fifteen millimetre) Cansealed C.P. brass stop cocks with wheel of Kingston / Jal / ESS / Jaquar / Seilco including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 15 mm (fifteen milimetre) dia PVC connection pipe brass union 450mm (four hundred fifty milimetre) length including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing PVC water storage tank of Sintex having 1000 Ltr capacity including G.I. (Galvanised Iron) inlet and outlet connection, 15mm (fifteen millimeter) bore ball value and mosquito proof PVC cover with locking arrangement including hosting up to all height above ground level including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Construction manhole with R.C.C. top slab in 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty milimetres nominal size) foundation concrete 1:4:8(One cement: Four sand: Eight graded crushed/broken stone aggregate 40mm(Forty milimetres nominal size) inside plastering 15mm (Fifteen milimetres) thick with cement mortar 1:3 (One Cement: three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty milimetres nominal size) finished smooth complete including curing and testing inside size 800x800mm (Eight hundred into Eight hundred milimetres) 500mm(Five hundred milimetres) deep, including precast cement concrete (medium duty) cover with 200mm (Two hundred milimetres) thick walls of brick masonry using cement dust clery building brick in cement mortar 1:3 (one cement: three sand) within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Brick bat/crushed stone aggrigate 40mm (fourty milimeter) in sock pit complete filling under sock pit Complete including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Shalabh Awasthi

Kapil Chand