IMP TO ROOF OF CERTAIN MD QTRS AND KITCHEN CABINETS IN SMQ AND OMQ, ADDN ALTN TO BLDG NO 268 (SWO OFFICE), PROVN OF SERVO VOLTAGE STABILIZER AT BOREWELL AND PROVN OF CHEMICAL EARTHING AND POWER CABLE AT AF STATION JMR, KHAMBHALIA, DWARKA UNDER GE2

Amount

M&L for complete removal of existing unserviceable water proofing treatment from top of roof and canopies / chajjas of building including removal of debris outside MD land complete all as specified and directed.

Demolition of cemet concrete any description and in any position not otherwise specifically provided for complete all as specified and directed.

M & L for providing plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) of average thickness 40 to 50mm in adequate slope on roof surfaces for padding to achieve the 1:40 slope complete all as specified and directed.

M&L for providing screed bed of 10 to 15mm avg thick in CM 1:4 for laying floor finish, mixed with WPC @3% by weight of cement on fair faces of concrete surfaces without using extra cement as in roof complete all as specified and directed. Note:- WPC shall be measured & paid separately.

Supply only liquid water proofing compound complete all as specified and directed.

Material and labour for water proofing treatment to slab area with smartcare APP membrane 3.00 mm thick polyester modified preformed membrane mineral finish with the help of torching with side overlap of 100mm to be done over one coat of smartcare bitumen primer apllied with brush/roller laying achieving a forced coverage of 4 sqmt/ltr as per manufacturer's instructions complete all as specified and directed.

M&L for repairing of chajja / roof projection/roof spout by taking down old plaster applying 10 mm thick rendering in cement mortar 1:3 and finishing the surface even & smooth with out using extra cement and complete surface finish with two coats of exterior emulsion etc complete all as specified.

M&L preparation of existing treatment of old surface including brooming down , scrapping down smoke soot, mould, moss and efforescent salts and trading oil and grease spouts and cleaning with water on wall applying one coat of Acrylic emulsion ( exterior whether coat) paint of any tint as approved complete all as specified directed.

Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, including removal of debries to a distance exc 1.5 Km but n. exc 2 Km. complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished fair and even etc complete all as specified and as directed.

M&L for Preparing new plastered suface of walls and applying two coats distemper oil emulsion, white or tinted over a coat of primer complete all as specified and as directed.

M&L for preparation of new undecorated surface of wall and applying two coats of cement base paint complete all as specified and directed.

Dismantling water tanks of capacity exc 250 and n.exc 500 ltrs and removing to store complete all as specified and directed.

Dismantling water tanks of capacity exc 500 and n.exc 1000 ltrs and removing to store complete all as specified and directed.

Supply and fix 500 litres capacity, rotational moulded, polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with 25mm dia GI tank nipple for inlet, outlet, washout and overflow etc complete all as specified and directed.

Supply and fix 1000 litres capacity, rotational moulded, polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with 25mm dia GI tank nipple for inlet, outlet, washout and overflow etc complete all as specified and directed.

M&L for disconnecting existing tanks of capacity exc.250 ltr and n exc 500 ltr, setting aside (or lowering if required) for repairs of tank base platform, etc. and reconnecting and re-fixing in position complete all as specified and directed.

M&L for disconnecting existing tanks of capacity exc.500 ltr and n exc 1000 ltr, setting aside (or lowering if required) for repairs of tank base platform, etc. and reconnecting and re-fixing in position complete all as specified and directed.

Taking down steel water tubing and connection 20mm bore complete all as specified and directed.

Taking down steel water tubing and connection 25mm bore complete all as specified and directed.

Refixing 20mm old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) complete all as specified and directed.

Refixing 25mm old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) complete all as specified and directed.

Removing building materials (cement concrete any description, bricks, stone slab and tiles, bricks dust or mud etc) to a distance of 30 KM beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations.

S & F in repair 12mm thick (7 Nos ply) ply wood, Type BB (with BWR) complete all as specified and directed.

S& F in repairs 18/19 mm thick plywood (12 Nos of ply) grade BWR, type BB fixed width screws to timber frme work or plywood complete all as specified and directed.

M & L for 0.90mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

S&F in repair magnatic catcher and connected plate to shutters and frame as per sample complete all as specified and directed.

S & F in repair drawer handles, projection drop (50mm to 65mm) on screwed plate complete all as specified and directed.

S&F in repiars bottom mounting drawer slides (drawer channel) with a white powder coated finish complete set of slides fixed with wooden surface including necessary accessories, complete all as specified and directed.

S & F in repairs kitchen basket fabricated with stainless steel section (SS-304) best quality of size 430mm x 508mm x 100mm for different use such as placing plane plate / disc / cup / saucer / cutlery / thali etc fixed in position complete all as specified and directed.

S & F in repairs kitchen basket fabricated with stainless steel section (SS-304) best quality of size 430mm x 508mm x 200mm for different use such as placing plane plate / disc / cup / saucer / cutlery / thali etc fixed in position complete all as specified and directed.

S & F in repairs kitchen basket fabricated with stainless steel section (SS-304) best quality of size 430mm x 508mm x 300mm for different use such as placing plane plate / disc / cup / saucer / cutlery / thali etc fixed in position complete all as specified and directed.

Taking down and resecuring or easing/ greasing & adjusting and refixing of existing kitchen basket fabricated with stainless steel section (SS-304) best quality of size 430mm x 508mm x 100mm for different use such as placing plane plate / disc / cup / saucer / cutlery / thali etc fixed in position complete all as specified and directed.

Taking down and resecuring or easing/ greasing & adjusting and refixing of existing kitchen basket fabricated with stainless steel section (SS-304) best quality of size 430mm x 508mm x 200mm for different use such as placing plane plate / disc / cup / saucer / cutlery / thali etc fixed in position complete all as specified and directed.

Taking down and Resecuring or easing/ greasing & adjusting and refixing of existing kitchen basket fabricated with stainless steel section (SS-304) best quality of size 430mm x 508mm x 300mm for different use such as placing plane plate / disc / cup / saucer / cutlery / thali etc fixed in position complete all as specified and directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/ridge, fixed with self tapping screws complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S & F framed work as in gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

M&L for preparation of new steel or iron surfaces over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

Supply and fix powder coating of any colour (thickness of powder coating not less than 50 micron) anodised aluminium partitions, with using aluminium section weighing 0.55kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, sliding chanel witth roller, anodized aluminium snap beading screws including Sheet glass of 4 mm thick and 12mm thick prelaminated particle board etc, complete all as specified and directed.

M&L for rendering 10 mm thick in CM 1:6 using on fair faces of brick work or concrete surfaces and finish the surface even and smooth without using extra cement complete all as specified and directed.

M & L for two coats of oil bound distemper on new plastered surfaces on wall including preparation of new plastered surfaces complete all as specified and directed.

M & L for preparation of old distempered/ decorated surfacesof walls incl brooming down, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of distemper oil emulsion complete all as specified and directed.

Supply fabricate & fix in position anodised aluminium powder coated (minimum thickness of powder coating 50 micron of approved colour) door shutter with frame, partly glazed with 5 mm thick tinted glass and partly panelled with 9 mm thick prelaminated particle board with both side decorative laminated including rubber bead joining cleat for fixing in position, aluminium door handle 150 mm size, aluminium barrel tower bolt 200 mm size etc all as specified below complete all as specified and directed. (a) Frame (top & side) section shall be of size 101.60 x 44.75 x 2.4 mm ( section No 14021) (b) Vertical Members of shutter section shall be of size 85.00 x 44.45 x 2.00 mm (Section No 19560) (c) Top Members of shutter Section shall be of size 83.50 x 44.45 x 2.00 mm (Section No 19581) (d) Lock rail (Middle member) of shutter Section shall be of size 150.00 x 44.45 x 3.00 mm (Section No 19596) (e) Bottom Members of shutter section shall be of size 150.00 x 44.45 x 3.10 mm (Section No 19584) (f) Glazing clip for securing glass of shutters shall be of 0.80 mm thick (Section No 19370).

S&F in repairs for 8 to 9 mm thick Pre painted gypsum building boards of size 595 x 595mm PVC laminated at back side of board flat in ceiling fixed or laid / including powder coated GI snap grid of size 605mm x 605mm frame work using 36.50 x 23.50 x 1.5mm main tee, 23.50 x 23.50 x 1.5mm cross Tee and 25x25x1.5mm angles for false ceiling with screws fixed to false ceiling including hangers 4 mm dia G.I (upto 1200mm length) adjusting level fixed to roof slabs complete all as specified and directed. Note: The rate inclusive of scaffolding and necessary arrangements

M & L for concealed point wiring with PVC insulated and unsheathed multistranded Fire retardant low smoke (FRLS) copper conductor single core 1.5sqmm (nominal area) cable using approved colour code as per IS drawn through heavy duty rigid non metalic PVC conduit not less 20mm dia including all accesories like bend,tess,junction boxes etc with all accessories soutable for moduler type fitmnet including making arrangement for fixing of moduler flush boxes of suitable size complete along with copper earth wire PVC insulated & unsheated multitranded (FRLS) copper conductor cable of size 1.5sqmm as continous earth wire connected to common earth and erth dolly complete and making good disturbed surfaces of wall, floor or ceiling with plaster of tiles or froof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as specified and directed. Note : Modular metal boxes will be measured and paid seperately.

(a) One Light point /Fan point controlled by one switch

(b) One 3 pin socket outlet 5Amps on the same board with other switches

(c) One 3 pin 5 Amp socket out let controlled by one switch on independent board

M & L for concealed point wiring with PVC insulated and unsheathed multistranded fire retardant low smoke (FRLS) copper conductor single core 2.5sqmm (nominal area) cable using approved colour code as per IS drawn through heavy duty rigid non metalic PVC conduit not less 20mm dia including all accesories like bend, tess, junction boxes etc with all accessories suitable for moduler type fitmnet including making arrangement for fixing of moduler flush boxes of suitable size complete along with copper earth wire PVC insulated & unsheated multitranded (FRLS) copper conductor cable of size 2.5sqmm as continous earth wire connected to common earth and erth dolly complete and making good disturbed surfaces of wall, floor or ceiling with plaster of tiles or froof treatment etc and finishing the surfaces with distemper/white washing / colour washing to match with the existing surface complete all as specified and directed.

All as per item No 50 above but wiring with 4.0 Sqmm multi-stranded copper conductor PVC insulated, unsheathed fire retardant low smoke, cable and 4.0Sqmm multi-stranded copper conductor PVC insulated, unsheathed fire retardant low smoke, cable as continous earth wire connected to common earth dolly for 15 Amps multipurpose socket outlet on independent board, controlled with one way switch.

M&L for ceiling rose, 2 to 3 terminal PVC / polycarbonate, isolated body type suitable for AC 230volts complete all as specified and directed.

M & L for module cover plate with frame as per site requirement for following module complete all as specified and directed.

(a) 3 module

(b) 4 module

(c) 6 module

(d) 8 module

M & L for modular metal Flush box as per site requirement.

(a) 3 module

(b) 4 module

(c) 6/8 module

M & L for modular switch 1 way 6 Amp 1 module complete all as specified and directed.

M &L for modular socket 6A 2/3 Pin universal 2 module, complete all as specified and directed.

M & L for modular switch 1 way 16/20 Amp 1 module complete all as specified and directed.

M &L for modular socket 16A / 6A 2/3 Pin combined 2 module, complete all as specified and directed.

M & L for modular fan step regulator 100 watt 2 module, complete all as specified and directed.

S&F recess mounted LED light fitting 2'x2', 36 Watt, Smart Glow, General purpose square shaped luminaire with low height CRCA housing and high transitivity diffuser suitable for office application with diffused acrylic cover complete with all accessories and connecting up with three core flexible copper cable of size 23/0.0076 complete all as specified and directed.

S & F energy efficient BLDC Ceiling Fan, 1200mm sweep BEE 5 star rated, AC single phase, 230 volts, 50 Hz, and connecting up including provision of three core flexible copper wire of size 1.5 sqmm from ceiling rose to ceiling fan complete in all respect and all accessories complete all as specified and directed including taking down old unsv, all as per site requirement.

Supply and fixing Wall Fan high speed, 400 mm sweep, 220-240 volts, AC, 50 Hz 1400, ± 50 rpm three blades with pull cord for on/off,speed setting and osillation on/off, air delivery not less than 56 CMM, power consumption not more than 70 watt complete all as specified and directed.

M&L for submain wiring using PVC insulated and unsheathed multistranded FRLS copper conductor cable using approved colour code as per IS drawing in and incl PVC casing and capping with all accessories and making good disturbed surfaces of wall, floor or ceiling with plaster and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as specified and directed of the following sizes of cables:-

Using two single core PVC insulated FRLS cable 4 sqmm copper conductor multi stranded and 4.0 sqmm copper conductor insulated cable using as earth wire Note :2 runs of 4sqmm copper cable & 1 run of 4.0sqmm copper cable in and including 20mm PVC casing and capping shall be measured as one unit

Using two single core PVC insulated FRLS cable 2.5 sqmm copper conductor multi stranded and 1.5 sqmm copper conductor insulated cable using as earth wire Note :2 runs of 2.5sqmm copper cable & 1 run of 2.5 sqmm copper cable in and including 20mm PVC casing and capping shall be measured as one unit

M & L for distribution board (DB), double door (CRCA sheet) dust and vermin proof SPN 8 way with 100 Amps rated copper busbar, neutral bar, earth bar and cable ties for cable management, reversible door for for IP 43 , single pole and neutral 250 Volts, flush to wall complete with IP 43 protection complete all as specified and directed.

M&L for MCB single pole & neutral 240 volt C curve 10 KA (32 to 63) Amps capacity IP 20 complete all as specified and directed.

M&L for MCB single pole, 5 to 30 Amp 240 volt B curve 10 KA, IP 20 complete all as specified and directed.

S & F industrial type plug & socket board SP & N enclosure with 2 pole and earth metal plug & socket with 20 Amp MCB SP, complete all as specified and directed.

Excavation in trenches not exc 1.5 m wide and n.exc 1.5 m in depth for foundation / fixing pole / laying cable and pipe line etc or for man hole etc not exc 10 sqm on plan and getting out in soft / loose soil complete all as specified and directed.

Returning filling in including spreading, leveling, watering and well ramming in layers, not exceeding 25 cm thick using excavated soil complete all as specified and directed.

Removing excavated Soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Supply & lay XLPE insulated, PVC inner sheathed, armoured with galvanised steel strip or wire, heavy duty, LT underground cable ISI marked with aluminium multistranded conductor 1100 volt grade of size 16 Sqmm 2 core laid in trenches / duct passing through pipe / duct or fixed on pole and connecting and testing etc including taking down old cable complete all as specified and directed.

Material & labour for 50 mm dia bore GI steel tubing light grade for protection of cable / earth continuity conductor fixed to poles / walls / roof or laid in floors, road, crossing or ducts fixed with clamps , bolts nuts and washer etc including taking down old pipe complete all as specified and directed.

M&L for providing dry river sand as in sand cushioning 18cm before and 5 cm after laying of under ground electric cable, thickness specified in SSR Part-I, including punning down of sand in layer complete all as specified and directed. Note: For measurement purpose punned thickness of sand only will be considered.

Supply & laying ISI marked & conforming to IS-5820-1970 unreinforced precast concrete cable cover Class LV, flat of size 250 mm X 150 mm X 40 mm in trenches as protection to LT UG cable complete all as specified and directed.

Supply and installation servo controlled automatic voltage stabaliser of capacity 25 KVA (confirming asper BIS : 9815 : Part 1 : 1995 reaffirmed 2019) 3 phase, 50 Hz, Naturally Oil cooled, Out door type unmabalanced type copper wound , digital display Type , relay free smooth and silent operation with 1 st filling of transformer oil (IS 335:2018) having following specification (a) Input voltage 360voltage -480 Volateg (b) Output voltage 415+-1% adjustable (c) Rated frequency 50 Hz (d) No distortion in wave form (e) Response time not exceed 10mile seconds (f) sensitivity (+-) 1% (g) Rate of correction more then 6 volt / second for phase (h) Class of inslation A (i) Nomload losses less than 0.5% (j) Full load losses less tahn 2.5% (k) Duty cuyccle 24x7 (i) efficiency more than 95% (m) type of load 3 phase unbalanced type (n) Digital display voltmeter /ammeter . overload Protection /short circuit protection, High /Low voltage cut off, by pass arrangement in case of emergency, single phase seuqency change protection IP- 55 Protection for out door installation complete all as specified and directed.

Material & labour for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation, mass concrete for road crossing etc complete all as specified and directed.

Material & labour for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in foundation, mass concrete for road crossing etc complete all as specified and directed.

Material & labour for PCC 1:2:4 type B2 (using 40mm graded stone aggregate) as in foundation, mass concrete for road crossing etc., complete all as specified and directed.

Supply & lay XLPE insulated, PVC inner sheathed, armoured with galvanised steel strip or wire, heavy duty, LT underground cable ISI marked with aluminium multistranded conductor 1100 volt grade of size 25 Sqmm 3.5 core laid in trenches / duct passing through pipe / duct or fixed on pole and connecting and testing etc including taking down old cable complete all as specified and directed.

Supply and testing cable LT XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable heavy duty with standerd aluminum conductor, 1100 Volts grade of size 120 Sqmm 4.0 core complete all as specified and directed.

Supply and lay reinforced precast concrete cable cover class LV type-2 flat,size 300x180xx40 mm complete all as specified and directed.

Earthing complete with copper earth earth plate electrode 60×60cm.× 3.15mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to copper strip of 20X3 by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point including medium grade GI watering pipe 25mm bore with funnel wire mesh and medium grade GI earth wire protection pipe 50mm bore up to main board complete as specified and including testing on completion all as directed by EIC

Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required of copper strip 20x3 mm

Material and labour for tripod chemical earthing (comprising of three chemical earthing). The chemical earthing will have specification as follows:- (a) Copper electrode of wall thickness minium 2 mm not less than 3 mtr length with minium 75 mm outer dia. (b) Fixing of copper earth electrode by drilling/boring 175 mm dia hole, 5.00 mtr deep in any type of strata, placing electrode in hole, returning, filling excavated soil by mixing mon 10 kg GEL per bore and 75 kg soil resistivity Improvement (SRIP) compound as per manufacture instruction. (c) FRP earthing result display board 254x380 mm made out of plastic material showing information related to type of earthing result, due date of testing along with fixing sie 610mm height made of plastic hollow pipe of dia 20 mm. (d) PCC earthing protection chamber for each earthing pit in PCC 1:2:4 type B1 for precast chamber cover 50 mm thick, rainforced with weided steel wire fabric or XPM jali(weight not less than 4.00 kg/sqm). Make : Powertrac/McMLL Earthing solution/ Ashlock

EVEREST BUILDERS (BID ID -3451124)

Jagdamba Engineering (BID ID -3456456)

DWARKADHISH ENTERPRISE (BID ID -3453080)

Nirmal Construction (BID ID -3455146)

R.H.ENTERPRISE (BID ID -3453655)

suvidhiconstruction (BID ID -3455494)

Sagathiya Builders (BID ID -3456579)

Indice Technologies (BID ID -3456440)