Loading
Loading…
Loading…
Tender Value
₹6.5 Cr
EMD Value
₹4.7 L
Closing Date
9 Jan 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
SIGNAL
16 conditions · 4 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where: V= Advertised value of the tender in Crores of Rupees. N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover.
The Tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: 1Three similar works each costing not less than the amount equal to 30% of advertised value of the tender OR 2Two similar works each costing not less than the amount equal to 40% of advertised value of the tender OR 3One similar work costing not less than the amount equal to 60% of advertised value of the tender
UPLOADING OF THE CERTIFICATE:-The tenderers shall submit a copy of certificate stating that all their statements/documents submitted along with bid are true and factual. Standard format of certificate to be submitted by the bidder is enclosed as Annexure-V. In addition to Annexure-V, in case of other than Company/Proprietary firm. Annexure- V(A) shall also be submitted by the each member of a Partnership Firm/ Joint Venture (JV) / Hindu Undivided Family (HUF / Limited Liability Partnership (LLP)etc., as the case may be. Non submission of above certificate(s) by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self-attested/digitally signed by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document.
DEFINATION OF SIMILIAR NATURE OF WORK:-Any Signaling Work of 1.1.1 EI/PI/RRI/IBH/ABH/LC Gate Interlocking Track circuit works /Axle counter works etc.
8 conditions · 2 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
All payment and other conditions are attached with tender document.
Although year of specification is given in the schedule, last amendment, if any, shall apply.
All tenderer must have valid GSTN number and rates must be inclusive of GST Act and itsamendment.
Compliance of GST act/rules & correction/modification issue by railway board with regard toGST act shall be binding on contractor & railway.
Genral instruction :- 1 The offer will be evaluated based on certificates enclosed with theoriginal offer only. The Railways will not enter into any correspondence to get thesecertificates subsequently and the offer shall be evaluated based on the documents submittedalong with the offer.2 Tenderer may please note that meeting of eligibility criteria is strictlybased on completion certificates issued by the executive in charge of work and not linkedwith mere list of works claimed to have been executed by the tenderer or a copy of workorder from Railways. 3 Tenderer may please note that fulfilling of eligibility clause shall beascertained only from the completion certificates issued by the executive-in-charge of workand mere list of works claimed to have been executed by the tenderer or a copy of workorder from Railways shall not be enough. It may also be noted that cognizance of thoseworks, which are nearing completion or have been almost completed, shall not be taken onlythose completion certificates, wherein successful commissioning satisfactory performanceof work have been clearly unambiguously acknowledged by Executive-incharge of anyRailway Unit or any Govt. Dept./Undertaking for any similar work shall be considered for thispurpose.4 Any variation to quantities in any item and its associated wiring material account ofsupply and installation will have to be born by the tenderer. Railway Engineer s decision inthis regard shall be final.5 All drawings related with the work can be obtained from the officeof DRM Kota on any working day during office hours.
S&T Work in connection with Construction of Standard Track Machine Siding for RGM and other Track Machine siding work at different Station over Kota Division.
KOTA-SNT-SIG-2025-37~WCR
KOTA-SNT-SIG-2025-37
Open
Works - General
24 Months
Kota, Rajasthan
₹0
₹4.7 L
9 Jan 2026
10 Dec 2025
26 Dec 2025
104 items across 2 schedules · ₹6,49,68,060.88 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Supply of 4 conductor disconnect terminal block with test & measurement facility, with screw less, spring cage clamp connections suitable for 0.08 to 2.5 Sq.mm conductor with current capacity of 16 Amps as per RDSO Spcn. No. RDSO/SPN/189/2004 Ver. 3.0 or latest. | Numbers | 4350.00 | 66.79 | 2,90,536.5 |
| 2 | Supply of End plate compatible to above screwless terminals. The end plates shall be of different colour than that of disconnect terminal blocks. | Numbers | 250.00 | 12.87 | 3,217.5 |
| 3 | Supply of Din rail of dimension 35mm x 7.5mm, 1 mm thickness, 1Mtr length, slotted compatible to above terminals of WAGO or PHOENIX make. | Numbers | 65.00 | 115.99 | 7,539.35 |
| 4 | Supply of End Stop 10mm for above Din 35 Rail of WAGO or PHOENIX make. | Numbers | 250.00 | 11.37 | 2,842.5 |
| 5 | Supply of dual fuse alarm system / fuse fail indication cum monitoring and automaticchange over system for vitalfuses as per draft specificationNo. RDSO/SPN/209/2012 Ver2.0 or latest. This consists fuses of different ratings as 0.6A, 1.6A, 10A, 16A. Number of fuses of ratings to be decided as per site requirent and Engineer In-charge. (01 Numbers= 01 Fuse) | Numbers | 131.00 | 1,165.5 | 1,52,680.5 |
| 6 | "Supply of relay QN1 (Non ACimmunized relay), 8F/8B (24V/50V)along with plug board (Base plate),retaining clips and connectorsconforming to BRS:930, IRS:S34 &IRS:S23 as required. | Numbers | 25.00 | 4,766.84 | 1,19,171 |
| 7 | Supply of QNNA1 (AC immunisedrelay), twin relays 24V DC, 6F/2B or 4F/4B (as required)along with plugboard (Base plate), retaining clipsand connectors confirming toBRS:960, IRS:S34 & IRS:S23 | Numbers | 5.00 | 3,680.62 | 18,403.1 |
| 8 | Supply of Relay plug in type styleQL1 magnetically latched neutral linerelay, 24 V DC, Metal to CarbonContacts complete with plug board,retaining clip & Connectorsconforming to BRS: 935A, IRS: S@ 45"38@ IRS: S-23 or latest 11F/4B Front &Back contacts for interlocking codefor this unit shall be ABDEG. | Numbers | 13.00 | 6,225.53 | 80,931.89 |
| 9 | Supply of QSPA1, 24VDC, Slow topick up,8F/4B along with plug board(Base 43 plate), retaining clip andconnectors conforming toBRS:933A,IRS:S60 & IRS:S34.Material inspected by RDSO | Numbers | 36.00 | 6,091.41 | 2,19,290.76 |
| 10 | Supply of Relay Ac Immune, Plug intype, Style QBCA-1, DC Biased PointContactor, 24V DC, 2F DC, 2HF-4BContacts Front Contacts Heavy Dutyand Back Contacts Metal to CarbonComplete with Plug Board, RetainingClips and Connectors, Conforming toBRS 943, IRS S 34 and IRS S 23.Material inspected by RDSO | Numbers | 11.00 | 5,672.44 | 62,396.84 |
| 11 | AC/DC Clamp Meter Model 3540 (KOICO Make)/SCM222 | Numbers | 14.00 | 18,762 | 2,62,668 |
| 12 | Supply of VDU Monitor unit of size 43 inch as per specifications. The display of VDU shall be compatible for 4K resolution to accommodate large yard layout. Make Sony )/ Samsung/ LG. | Numbers | 6.00 | 38,500 | 2,31,000 |
| 13 | Supply of LED for shunt signal integrated type as per RDSO Specn. No RDSO/SPN/153/2023 (Rev. 5.0). | Numbers | 63.00 | 5,070.97 | 3,19,471.11 |
| 14 | Supply of Shunt Signal Post complete with Base. GI Pipe, 'B' class of 80mm Dia. of min. 1 meter length to be supplied by the contractor. | Numbers | 21.00 | 3,564.2 | 74,848.2 |
| 15 | Supply of position light LED based shunt signal unit (as per RDSO Drg. No. SA- 23840). | Numbers | 21.00 | 12,613.89 | 2,64,891.69 |
| 16 | Supply of Off-Set bracket 5-1/2 '' for Signals & Routes as per Specification No. IRS: S- 10/78 and Drg no. SA-23080(Adv) Alt-1 or with latest amendment. | Numbers | 21.00 | 1,317.07 | 27,658.47 |
| 17 | Supply of Retro Reflective Signal No. plates with signal numbers as per IRSEM 2021- Drg No. 19-D10 with clamps, nut bolts and other accessories required for fixing. This includes Signal No. plate, Markers, Signal numbers/markers will be abbrivated approved by Railway. | Numbers | 271.00 | 646.65 | 1,75,242.15 |
| 18 | Supply of SS Fit & Forget Bond wire of Length 1.5 Meter. | Numbers | 25.00 | 516 | 12,900 |
| 19 | Supply of SS Fit & Forget Bond wire of Length 2 Meter. | Numbers | 25.00 | 538 | 13,450 |
| 20 | Supply of SS Fit & Forget Bond wire of Length 3 Meter. | Numbers | 42.00 | 580 | 24,360 |
| 21 | Supply of SS Fit & Forget Bond wire of Length 4 Meter. | Numbers | 21.00 | 623 | 13,083 |
| 22 | Supply of SS Fit & Forget Bond wire of Length 9 Meter. | Numbers | 20.00 | 838 | 16,760 |
| 23 | Supply of SS Fit & Forget Bond wire of Length 10 Meter. | Numbers | 20.00 | 880 | 17,600 |
| 24 | "Supply of Electric point machine, Non trailable, internal locking, 220 mm throw, with IP67 motor ,Minimum AC immunity 160 VAC, with tools & complete accessories including complete ground connection and all insulation, crank handle and along with clamp point lock 60 kg, TWS as per Drg No. RDSO/S- 11000 as per RDSO SPN. IRS:S 24/2002 with Amd. 01 or latest." | Numbers | 41.00 | 1,32,688.64 | 54,40,234.24 |
| 25 | "Supply of UFSBI event logger with E1 / Dark Fiber connectivity from site to Control Room." | Numbers | 5.00 | 2,06,500 | 10,32,500 |
| 26 | Supply of Digital Cards for SSDAC. As per RDSO Specn. No. RDSO/SPN /177/ 2012 (Ver. 3) or latest. | Numbers | 2.00 | 1,72,870 | 3,45,740 |
| 27 | Supply of Analog Cards for SSDAC.As per RDSO Specn. No. RDSO/SPN/177/ 2012 (Ver. 3) or latest. | Numbers | 2.00 | 1,06,200 | 2,12,400 |
| 28 | Supply of PD1 (21KHz) card for GG Tronic make HASSDAC as per RDSO specification No.RDSO/SPN/177/2012 withversion 3.0 or latest with RDSO inspection Make/Brand:- GG Tronics. Make / Brand: G.G. TRONICS INDIA PRIVATE LIMITED | Numbers | 14.00 | 39,530 | 5,53,420 |
| 29 | Supply of PD2 25 KHZ Card suitable for GG Tronic make SSDAC/HASSDAC as per RDSO Spec. no. RDSO/SPN/177/2012 Ver 3.0 or latest make/brand:-GG Tronics Make / Brand: G.G. TRONICS INDIA PRIVATE LIMITED | Numbers | 13.00 | 39,530 | 5,13,890 |
| 30 | Supply of HSS Twist Drill Parallel shank 7.2/14/8 mm make - IT/ Adison/JK. (Qty shall be given by site engineeri. | Numbers | 60.00 | 105.37 | 6,322.2 |
| 31 | Supply of 21 KHZ/25 KHZ Transmitter coil assembly for HASSDAC Systems RDSO Specn. No. RDSO/SPN/177/2012 (Ver.3) Make-G.G.Tronics. Make/Brand:- GG Tronics ,HSN Code: 85309000 | Numbers | 12.00 | 44,861.24 | 5,38,334.88 |
| 32 | Supply of 21 KHZ/25 KHZ Receiver coil assembly for HASSDAC Systems RDSO Specn. No. RDSO/SPN/177/2012 (Ver.3) Make-G.G.Tronics. Make/Brand:- GG Tronics , HSN Code:- 85309000HSN | Numbers | 12.00 | 44,861.24 | 5,38,334.88 |
| 33 | "Supply of CAT-6 UTP cable pair in box of 1000 feet. (305 mtr.) Make: Finolex, Polycab, D-Link..(PER UNIT=305mtr) | Per Unit | 6.00 | 3,060.64 | 18,363.84 |
| 34 | Supply of 108 Mbps TDM over Ethernet Access Multiplexer with provision of 4 DTE E1 channel over fibre port, fibre port supporting single mode with driving distance upto 15 Kms plus one Ethernet port 10/100 Mbps, power supply AC / DC option from a single socket. Mrotek model ECAT-01L as per specification. | Numbers | 5.00 | 21,611.01 | 1,08,055.05 |
| 35 | Supply, installation of MAPLE 4C or equivalent 1U, 19 inch rack mountable device consisting of four E1 ports and threeslots and one slot populated with 2 w/4 w E & M Supporting upto eight interfaces, Balance two slots empty, unit shall supports both 230 V AC / 48 V DC power supply including 50 pin cable one no. for supporting both 2w/4w E & W, AC adaptor one number. Two year warranty. The work shall be done as per location plans and instruction of Rly engineer(field officer) at site. all the required cable and adaptor & accessories etc. will be supplied free of cost by tenderer with the satisfaction of railway engineer at site. Make- Mrotek, Realtime, Cygnus, Cisco only.Specifications with latest software. | Pair | 5.00 | 94,706.94 | 4,73,534.7 |
| 36 | Supply of Pad Locks 50 mm with common key make Godrej / Navtal only. | Numbers | 27.00 | 353.02 | 9,531.54 |
| 37 | Supply of Apparatus Case with miniature 'E' type locks with keys (1 key per 5 location boxes) of ward no. 41 (as per Specification No. IRS: S-30/64 & RDSO Drg. No. SA- 3376/M with latest Amendments) on both the doors, duly painted with red oxide.- Single Case as per Drg. No. SK- 783-1/2 & 2/2 with latest alteration. | Numbers | 23.00 | 20,558.69 | 4,72,849.87 |
| 38 | Supply of Apparatus Case with miniature 'E' type locks with keys (1 key per 5 location boxes) of ward no. 41 (as per Specification No. IRS: S-30/64 & RDSO Drg. No. SA- 3376/M with latest Amendments) on both the doors, duly painted with red oxide.-Half Case as per Drg. No. SK- 783-1/2 & 2/2 with latest alteration. | Numbers | 6.00 | 16,415.71 | 98,494.26 |
| 39 | Supply and Installation of OFC joint enclosure and splicing of Optic fiber cable (48 fibres) and testing | Numbers | 8.00 | 17,714.51 | 1,41,716.08 |
| 40 | Supply of Earth Electrode assembly as per Drg. No. S&T/CON/KOTA/EARTHING/01 ALT - 01. All nut, Bolts & Lugs to be of stainless steel. The earth electrode pipe shall be 'B' Class/ Medium Grade as per Specification No. IS: 1239 Pt. 1/ 2004 of Nominal Inner Dia 50mm, Outside dia (Max 60.8 mm, Min 59.7 mm), Thickness (3.6mm), Tolerance in Thickness ('+' not limited, '-' 12.5 percent). | Numbers | 30.00 | 1,313.36 | 39,400.8 |
| 41 | Supply of Track feed Battery chargers, 110V AC as per specification No. IRS: S-89/2013 ver. 1.0 or latest. Chargers shall be of 10 Amp output capacity suitable for charging 80 AH battery and 2/ 3/ 4 no. of cells with potential free contact. | Numbers | 41.00 | 3,184.75 | 1,30,574.75 |
| 42 | Supply of adjustable Track Feed Resistance disc type 30 Ohm as per RDSO Drg. No. SA- 20161-66/M (Adv) with latest Amendment with phenolic moulded base. | Numbers | 21.00 | 1,783.39 | 37,451.19 |
| 43 | Supply of 'B' type 120 ohms impedence choke to specn. No. IRS.S.65/83 (Amndt-3) or latest. | Numbers | 21.00 | 5,074.05 | 1,06,555.05 |
| 44 | "Supply of Low Maintenance Lead Acid Secondary Cell 2V, 80 AH as per Specification IRS: S-88/2004 with latest amendments. Cells should be supplied with microporous vent plug cum sealed floats, lead coated inter cell connectors, lead coated brass nut bolts & washers in dry and uncharged condition." | Numbers | 184.00 | 2,757.9 | 5,07,453.6 |
| 45 | Supply of Relay, AC immune, Plug-in type, style QTA2 relay, DC Neutral track, Relay 9 Ohms, 4F/2B contacts, metal to carbon, complete with plug board, retaining clip and connectors conforming to BRS: 939A, BRS: 966 (Appendix F2) IRS: S-34 & IRS: S-23 as applicable. | Numbers | 21.00 | 6,800.31 | 1,42,806.51 |
| 46 | Supply of Track Lead Junction Box as per Drg. No. JBP/S&T/C/106/I & II made from fiber glass, along with terminal blocks & links. The TLJB should be BLACK in colour. | Numbers | 42.00 | 1,451.05 | 60,944.1 |
| 47 | Supply of Electric Point Machine IRS make 110V DC operation (AC immunity 160V) NONTRAILABLE, complete with lock, detector, cable termination box and slides for lock and detector (Rotary locking) as per specification no. IRS: S-24/2002 amendment-1 or latest, requirement of point machine is 143 mm throw only as per RDSO Drg. No RDSO/S-10800. | Numbers | 10.00 | 72,527.41 | 7,25,274.1 |
| 48 | Supply of Ground Connection complete set suitable for IRS type Point machine for ordinary turnout of 60 Kg rails as per RDSO Drg. RDSO-S-3361. | Numbers | 10.00 | 11,205.57 | 1,12,055.7 |
| 49 | Supply of G. I. Bend pipe, 'B' Class/ Medium Grade, 50 mm Dia & 1.2 M straight length and having fixing plate welded with bent pipe as per Drg. No. Dy.CSTE(Con)/Kota/5 for point machine cable entry. | Numbers | 10.00 | 393.83 | 3,938.3 |
| 50 | Supply of Pre-wired Crank Handle cum Key Lock Relay box (of metal) along with accessories viz. LEDs, with approved type push buttons, terminal strips, string rod, etc. as per Drg. No. Dy.CSTE/C/Kota/6 (A) & (B). | Numbers | 9.00 | 12,049.6 | 1,08,446.4 |
| 51 | "Supply of William stretcher nylon insulation Set suitable for ground connection for motor point operation. Each set comprising of - (RDSO Drg. No.) T- 10367-1 no.,T-10368- 2 nos., T-10371- 4 nos. and conforming to the Specification IRS: S-23 & 40/84 with latest Amendment." | Set | 30.00 | 650.91 | 19,527.3 |
| 52 | Supply of Gauge Tie plate nylon insulation as per RDSO Drg. No. (T-10372- 1 no., T- 10368- 3 nos., T-10371- 6 nos. in each set) and to the Specification IRS: S-23 & 40 with latest Amendment as applicable. | Set | 30.00 | 297.82 | 8,934.6 |
| Schedule total | ₹1,49,18,026.5 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
ALNI-SIP.pdf
ATTACHMENT
FSP-SIP.pdf
ATTACHMENT
JHW-SIP.pdf
ATTACHMENT
LKE-SIP.pdf
ATTACHMENT
MLGH-SIP_2.pdf
ATTACHMENT
PSLI-SIP.pdf
ATTACHMENT
TD-SIG-2025-37-upload.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .