REPAIRS/REPLACEMENT OF SEWAGE LINES, MANHOLE COVERS, DESLUDGING OF SEPTIC TANKS AND SOAKAGE PITS AT OTM AND MD OFFRS IN DOMESTIC AREA AT AIR FORCE STN PHALODI.

Amount

M&L for cleaning and desilting of sewage lines 100mm dia of any size and shape upto any depth by pumping out /removing liquid waste/sewage ,plugging the ends pipes or diverting the flow into drains if necessary, removing silt, sludge etc, sprinking bleaching powder on the silt to avoid bad smell including all precautionary and safety measures, such as safety belts, lighting arrangements face mask etc and removing the same(silt,sludge &other waste material) in leak proof trucks covered with tarpoline to outside of MOD land all as per existing rules and regulations of civil authorities and flushing the sewer lines with freah water etc complete all as specified and directed.

All as per item No 1 above but sewage lines exc 150mm dia.

M&L for cleaning and desilting of manholes depth not exceeding 1.50 metre by pumping out/removing liquid waste/sewage and plugging the ends sewer pipes or diverting the flow into drains if necessary, removing silt, sludge etc, sprinking bleaching powder on the silt to avoid bad smell including all precautionary and safety measures, such as safety belts, lighting arrangements face mask etc and removing the same(silt,sludge &other waste material) in leak proof trucks covered with tarpoline to outside of MD land all as per existing rules and regulations of civil authorities and cleaning the manholes with freah water etc complete all as specified and directed.

M&L for cleaning and desilting of manholes depth exceeding 1.50 metre but not exceeding 3.00 metre by pumping out/removing liquid waste/sewage and plugging the ends sewer pipes or diverting the flow into drains if necessary, removing silt, sludge etc, sprinking bleaching powder on the silt to avoid bad smell including all precautionary and safety measures, such as safety belts, lighting arrangements face mask etc and removing the same(silt,sludge &other waste material) in leak proof trucks covered with tarpoline to outside of MD land all as per existing rules and regulations of civil authorities and cleaning the manholes with freah water etc complete all as specified and directed.

M&L for cleaning the chocked/blocked in AC/CI/PVC soil waste pipe of any dia by removing cleaning eye and refixing the same after cleaning the pipe, making good damaged cement joints, dia of pipe not exc 150mm dia upto ground/stilt plus four floors.complete all as specified and directed.

M&L for cleaning the chocked/blocked in EWC/IWC/urinal/bathroom and kitchen sink including gully trap, nahani trap and removing of sludge/spoil/waste to a distance exe 100m and testing of same after cleaning complete all as specified and directed.

Excavation in trenches not exc 1.5 m wide and n. exc 1.5 m depth or n. exc 10 Sqm on plan and n exc 1.5 m in depth for foundations, laying pipes/ cables etc or for shafts,wells,cesspits, manholes,pier holes etc. in soft/loose soil, & getting out, complete all as specified and directed

All as per item No 7 above but depth exceeding 1.5m and not exceeding 3.0m.

Removal of excavated surplus soil to a distance exc 250m and n.exc 500mtr depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified & directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete all as specified and directed.

Demolition of brick or stone/ boulder masonary, built in cement mortar complete all as specified and directed.

M&L Pre-cast cement concrete type E1 (1:5:10) 20 mm graded stone aggregate. block masonry with solid blocks, exc . 10 cm in width and setting in CM 1:6 complete all as specified and directed.

M&L Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded aggregate) in foundations, filling and mass concrete complete all as specified and directed..

M&L Plain Cement Concrete Type C2 1:3:6 (using 40 mm graded aggregate) in surface channels and drain (Manhole) complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work in cement mortar 1:4 with water proofing compound finished even and smooth without using extra cement complete all as specified and directed. Note:- WPC shall measured and paid sepretally.

Supply only integral water proofing compound complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc.

M&L for 10 mm thick rendering in in cement sand mortar 1:3 with water proofing compound @ 3% weight of cement on fair faces of brick work/ block massonary or concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed. Note: Water proofing compound shall be paid for separetly .

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for ( reinforcement cut as reqd to facilitate demolation) complete all as specified and directed.

M&L for replacement of Precast RCC (1:2:4) type B-1 using 20mm graded stone aggregate as in landing, cover slab for manholes, chullah hood, chajjas, water troughs, mangers, shelves cover to drains and similar articles with plain fair faces including chamferred, weatherings, throating etc and set in cement mortar (1:6) including necessary form work complete all as specified and directed.

M&L for RCC( Reinforced cement concrete ) Type B1 1:2:4 (20 mm graded aggregate) as in slab supported on walls , beams and columns in floors, roofs , landings, balconies, canopies, deck slabs and in shelves and the like etc complete all as specified and directed.

Form work for rough finished flat surfaces of concrete to soffits of suspended slabs sucg as roof slabs , floor slabs, landings and similar work not exceeding 200 mm thick (Horizontal or slopping )

M & L for cement concrete (1:3:6) type C1 using 20mm graded stone aggregate as in lintels upto 1.5 metre clear span, cills, steps, siesmic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm height, copings, bed block,roof kerbs or mud stops, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throatings etc.including necessary form work complete all as specified and directed.

S & F for TMT bars 8mm dia and over cut to length, bent to shape required including bending, cranking spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar100mm complete all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar150mm complete all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar 200mm complete all as specified and directed.

Cutting in to existing manhole for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required (100 mm) bore complete all as specified and directed.

Cutting in to existing manhole for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required (150 mm) bore complete all as specified and directed.

Cutting in to existing manhole for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required (200 mm) bore complete all as specified and directed.

M&L for 100 mm bore salt glazed stoneware pipe, grade 'A' laid & jointed complete with collars in cm(1:1) with spun yarn & tested . Coomplete all as specified & directed.

M&L for 150 mm bore salt glazed stoneware pipe, grade 'A' laid & jointed complete with collars in cm(1:1) with spun yarn & tested . Coomplete all as specified & directed.

M&L for 200 mm bore salt glazed stoneware pipe, grade 'A' laid & jointed complete with collars in cm(1:1) with spun yarn & tested . Coomplete all as specified & directed.

Plain cement concrete 1:4:8 type D2 (Using 40mm graded crushed stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 100mm bore complete all as specified and directed.

Plain cement concrete 1:4:8 type D2 (Using 40mm graded crushed stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150mm bore complete all as specified and directed.

Plain cement concrete 1:4:8 type D2 (Using 40mm graded crushed stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 200mm bore complete all as specified and directed.

Removal of sludge from septic tanks in a form of solid, semisolid or liquid by means of pumping out or manually and taking out from site and disposed in low lying area to a distance exc 250 m and n.exc 1.00 Km. Disposal of sludge shall be covered with soft/loose soil. After removal of sludge from septic Tank, intereseptic chamber shall be washed with water completely inside and remove the dirty water outside to the satisfaction of Engineer-in-Charge for the following capacity:- (i) Septic Tank of 150 Users

All as per item No 37 above but Septic Tank of 100 Users

All as per item No 37 above but Septic Tank of 50 Users

All as per item No 37 here in above but Septic Tank of 25 Users

Dismantling 100mm bore cast iron drain pipes jointed in cement mortar and taking out from trenches/ or from walls complete all as specified & directed.

Dismantling 75mm bore cast iron drain pipes jointed in cement mortar and taking out from trenches/ or from walls complete all as specified & directed.

S&F 100mm bore cast iron sand cast soil, waste and vent pipe in any length with or without ears laid in trenches, in floors or fixed to walls with cement joints and provision of required number flat iron clamps of required size complete all as specified and directed .

S&F 75mm bore cast iron sand cast soil, waste and vent pipe in any length with or without ears laid in trenches, in floors or fixed to walls with cement joints and provision of required number flat iron clamps of required size complete all as specified and directed .

Demolition and breaking up 100 mm dia (internal). drain pipes (Salt glazed stone ware, AC or reinforced concrete) set in cement mortar complete all as specified and directed

S&F 110mm bore PVC(SWR) pipe single socketed in any length jointed with solvent fixed to wall including provision of required Nos mild steel clamps of suitable size complete all as specified and directed.

S&F cast iron bends (any radius) 75mm bore, with duck's foot or heel rest complete all as specified and directed.

S&F cast iron bends (any radius) 100mm bore, with duck's foot or heel rest complete all as specified and directed.

S&F cast iron bends (any radius) 75mm bore, with duck's foot or heel rest fitted with oval access doors complete all as specified and directed.

S&F cast iron bends (any radius) 100mm bore, with duck's foot or heel rest fitted with oval access doors complete all as specified and directed.

S&F in repair 100mm bore cast iron branch pieces double (equal or unequal), ordinary or inverted (Spigot or socket type) or with parallel branch with oval access door complete all as specified and directed.

S & F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

Note for all items :- (i) Contractor shall provide minimun 2 No,s safaiwala daily for getting complain be done, received from user. Safaiwala shall report to the office of Engineer-in-Charge for attandance for which a register will maintanded and payment should included against items mantioned above if found absent recovery @ Rs. 300/- per safaiwala per day shall be recovered from RAR/ Final bill. (ii) Contractor shall deposit the material brought at site after approval with Engineer-in-Charge before incorporating in the unit for verification of quantity and quality of material.

M/S SOLANKI GENERAL SUPPLIERS

Aggarwal brothers and company

BHARAT CONSTRUCTION AND SERVICES

M/S VISHNOI ENTERPRISES