Renovation of the existing ELU Experimental Learning Livestock Unit) of the Faculty of Dairy Technology at Mohanpur Campus, Haringhata , Nadia 741246 under West Bengal University Of Animal and Fishery Sciences

CIVIL & ELECTRICAL Works

Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (B) Wall (b) Area of each tile above 0.09 Sq.m (i) Coloured decorative Room-1 (15.24 +10.50) x 2 x 1.90 = 97.81 Room-2 (3.50 + 2.75 + 3.50 + 3.50) x 1.50 =19.87 Window Less- 1 x 1.20 x 20 = 24.00

Supplying, fitting & fixing granite slabs 15mm to 18 mm. thick with uniform texture & without decorative veins in columns,wall, facia,rise etc. with 15 mm thick [avg] cement mortar(1:2) including making suitable arrangements to hold the stones properly by brass / copper hooks including pointing in cement mortar (1:2) (1 white cement : 2 marble dust) with admixture of pigment matching the stone shades all complete as per direction of the Engineer-in-charge including cost of all materials, labours, scaffolding, staging, curing and roughening of concrete surface complete. [Using cement slurry at back side of granite @ 4.4 kg/sq.m & white cement slurry for joint filling @ 1.8 kg/sq.m] In ground floor (b) Area of each Granite slab above 1.00 Square meter. ( 3.00 + 4.00 + 4.00) x 0.60 = 6.60

Supplying, fitting and fixing Black Stone slab used in Kitchen slab, alcove, wardrobe etc. laid and jointed with necessary adhesive Cement mortar (1:2) including grinding or polishing as per direction of Engineer-in -Charge in Ground Floor. (b) Slab Thickness above 25 mm and upto 37.5 mm ( 3.00 + 4.00 + 4.00) x 0.60 = 6.60 14 x 0.60 x 1.20 = 10.08 16.68

Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contrr]e) A) Deep Colour & White 3.84 x 3.84 = 14.74 15.54 x 10.80 = 167.83 182.57

(b) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. 20 x 1 x 1.20 = 24 15.24 x 10.50 =160.02 180.02

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (a) On steel surface : With super gloss (hi-gloss) - With other than hi-gloss of approved quality- (ii) Two coats 20 x 1 x 1.20 = 24 15.24 x 10.50 =160.02 180.02

Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick) 3.50 x 3.50 = 12.25 3.50 x 3.50 x 2 x 1.50 =36.75 49.00

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.In Ground Floor: (a) One Coa Room-1 (15.24 +10.50) x 2 x 1.50 = 38.61 Room-2 (3.50 + 3.50) x 2 x 1.5 = 15.75 3.50 x 3.50 = 12.25 Out side- ( 4 + 6 ) x 2 x 3.20 = 60.60 (15.54 + 10.80) x 2 x 3.20 = 168.58 295.79

Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface. Two Coats Room-1 (15.24 + 10.50) x 2 x 1.50 = 38.61 Room-2 (3.50 + 3.50) x 2 x 1.5 = 15.75 3.50 x 3.50 = 12.25 Out side- ( 4 + 6 ) x 2 x 3.20 = 60.60 (15.54 + 10.80) x 2 x 3.20 = 168.58 295.79

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. In Ground floor (Two Coat) a) Normal Acrylic Emulsion Room-1 (15.24 x 10.50) x 2 x 1.50 = 38.61 Room-2 (3.50 x 3.50) x 2 x 1.5 = 15.75 3.50 x 3.50 = 12.25 Out side- ( 4 + 6 ) x 2 x 3.20 = 60.60 (15.54 + 10.80) x 2 x 3.20 = 168.58 295.79

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:6 cement mortar (b) 20 mm thick plaster, Ground Floor

(ii) With 1:4 cement mortar (b) 15 mm thick plaster Ground Floor

(ii) With 1:4 cement mortar (c) 10 mm thick plaster Ground Floor

(i) With 1:6 cement mortar (c) 15 mm thick plaster Ground Floor

Supply & Fixing 240 V, 3 nos. 16 A, 3 pin Modular type plug socket with 3 nos. 16A Modular type switch (Brand approved by EIC), 20A Modular switch type SP MCB (C-Curve) and Indicator without plug top on 2 row 12 Module GI Modular type switch board with 2 row 12 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply and fitting and fixing of LED light Tube Light in false ceiling ( 1'0'' x 1'0'') diamond make

Supply and fitting and fixing of Ceiling fan 1200mm High speed ( CG/ Orient/ Havels)

fitting and fixing of Ceiling fan 1200mm High speed ( CG/ Orient/ Havels)

Supply fitting and fixing of LED light Tube Light…

Supply and fitting and fixing of 18 " sweep heavy duty Wall mounted fan High speed ( CG/ Orient/ Havels)

Supply and fitting and fixing of Wall mounted fan High speed ( CG/ Orient/ Havels)

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to light point with 2 no. 2 way piano key type switch fixed on sheet steel fabricated switch board with Perspex/bakelite top cover on wall incl. necy. connections and making earthing attachment and mending good damages to building works. [PVC casingcapping and Switch board both on surface] Average run 12 mtr

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required 2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC

2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC

Taxes & Duties

Add: G.S.T. @ 18% of Rs.8,38,919=29 ( sum of Sl. No. 1.01 to 2.17) i.e. Rs. 1.51,005=47

Add: Labour Cess @ 1% of Rs. 9,89,924=76 (sum of Sl. No. 1.01 to 3.01) i.e. Rs. 9,899.25

Please Enable Macros to View BoQ information