Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance FLAT NO A 102 ASHOKVAN RAJSHIV CO OP HSG SOC SHIV VALLABH ROAD DAHISAR EAST MUMBAI 400 068 | MUMBAI SUBURBAN | MAHARASHTRA | 400068 | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Admitted-Finance | Admitted-Finance |
Tender Value
₹28.1 L
EMD Value
₹56,200
Closing Date
9 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF Trivandrum
Office of Garrison Engineer AF, Pulayanarkotta, Thuruvikkal Post, Trivandrum-11
CERTAIN REPAIRS TO JOINT FILLING HARD STANDING AND MISC REPAIRS IN VARIOUS UNITS AGE BR II AREA UNDER GE AF TRIVANDRUM
2023_MES_604929_1
8444
Open Tender
Civil Works
Item Rate
270 days
Trivandrum
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
Trivandrum
₹56,200
Yes
16 Aug 2023
11 Jul 2023
16 Aug 2023
11 Jul 2023
9 Aug 2023
26 Jul 2023
Amount
M & L for preparation of joints 10 mm wide, 25 mm deep by taking out existing bituminous or any other joint filling compound by chiseling/ machine cutting from the joints including backup rods from the joints, cleaning the joints thoroughly using compressed air or other mechanical means to make the surface free from dust/ bitumen/ any other sealing compound, protecting the floor surface using masking tape on either sides of joints to prevent accidental spillage of sealant, fixing the polystyrene backup rod of 15 mm dia, applying primer on joints with and sealing with approved polyurethane based pavement joint sealant all as per Manufacturer's instructions and removing masking tape after application of sealant complete all as specified and directed. Make: Fosroc or STP or any equivalent
M & L for preparation of joints 20 mm wide and 25 mm deep by taking out old filler board /backup rod, cleaning full depth of cutting by taking out all deposit material from the joint using compressed air or other mechanical means, protecting the floor surface using masking tape on either sides of joints to prevent accidental spillage of sealant, inserting the filler board of 20-22 mm dia (make: Siliflex STP or equivalent) and 10 mm deep with backup rod of 20-25 mm dia, applying primer on joints with and sealing with approved polyurethane based pavement joint sealant all as per Manufacturer's instructions and removing masking tape after application of sealant complete all as specified and directed. Make: Fosroc or STP or any equivalent
M & L for cutting/chipping slab cracks to "V" section in existing rigid concrete slab upto depth of 50 mm and width of 40 mm at top, cleaning out surface with compressed air or other mechanical means to remove dust/loose particles etc and applying epoxy mortar to a depth averaging 50mm, well packed and compacted with appropriate tools, properly levelled and finished flush with the existing slab using epoxy mortar all as per manufacturer's instructions complete all as specified and directed.
M & L for preparation of new or previously treated bituminous/concrete surfaces to recieve painting, painting lines, dashes, arrows, letters etc exceeding 10 cm width with two coat of approved water based road marking paint color white, Golden yellow, deep orange, PO red and black as per the requirement in the Air Field complete all as specified and directed. The line painting shall stand out boldly and solidly without showing signs of brush marks or surface underneath. If necessary the surface shall be repainted until the desired result is obtained. Make : APCOTRAK of Asian paints or equivalent. Note: Coverage area of paint shall be brought to 6 sqm/Lit by adding 10-15% of potable water.
M & L for preparation of bituminous/concrete surfaces and painting lines, dashes, arrows, letters etc not exc. 10 cm width with one coat of approved water based Road marking paint of color white, Golden yellow, deep orange, PO red and black as per the requirement in the Air Field complete all as specified and directed. Make : APCOTRAK of Asian paints or equivalent. Note: Coverage area of paint shall be brought to 6 sqm/Lit by adding 10-15% of potable water.
Dismantling Stone slabs /cement tiles etc of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar all as spd & directed.
Dismantling of floor/ wall tiling including cement mortar bedding (but not backing) removing of unserveable tiles and rubbish of the premises complete all as specified and directed
M & L for 50 mm thick PCC type B1 1:2:4 (20mm graded aggregate) as in sub base to flooring complete all as specified and directed.
M & L Chequered cement concrete tiles 25 mm thick, any shape and size, set & jointed in neat cement slurry in floors with pigments over and incl. 15mm thick screed bed in CM 1:6 complete all as spd and directed.
M & L for 18 mm thick black granite, table rounded and polished in slabs/ platforms etc , including15mm thick screed bed in CM 1:6 , pointing with white cement using admixture to match etc complete all specified and directed.
M & L for 18 mm thick black granite, table rounded and polished as in gate pilars/ walls etc , over 10 mm thick rendering as backing coat in CM 1:4 , pointing with white cement using admixture to match etc complete all specified and directed.
Sand filling under floors including watering and consolidation complete all as spd & directed.
M & L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with pigments complete all specified and directed.
S & F cement concrete tiles 20 mm thickness, set ,jointed and pointed in neat cement slurry laid over and including 15mm thick average thickness cement mortar 1:4 bed, complete all as specified and directed.
Demolition of cement concrete(un-reinforced) of any descriptions, in ground floors not exc 150mm thick, above or below ground level complete all as specified and directed.
M&L 75 mm thick PCC type B-2 ,1:2:4 (using 40 mm graded stone aggregate) as in hard standing, flooring and paving etc and finishing the surface even and smooth without using extra cement complete all as specified and directed.
Demolition of brick work or stone masonry built in cement mortar including all quions, arches, pillars,etc but excluding ashlar facings, dressed stone work and precast concrete articles all as specified
M & L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cm 1:4 all as specified and as directed
M & L for brick work with sub class 'B; brick in half brick thick built in CM 1:4 straight or curved in plan exceeding 6 mtr mean radius complete all as specified and directed.
M & L precast cement concrete solid blocks or slabs exc 10cm in width, built in cement mortar 1:3;6 using 20 mm graded aggregate in cm 1:6 all as specified and as directed
M & L for rendering 15 mm thick on fair faces of brick or concrete wall surfaces finished to evern and smooth without using extra cement in CM 1:4 complete all as specified and directed.
M & L 25 mm thick precast cement concrete louvres and jallies,Type C-0 , 1:3:6 ( using 12.5 mm graded aggregate) measured solid including all moulding set in cement mortar 1:6 complete all as spd & directed
Demolition of reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above GL) all as specified
M & L for precast reinforced concrete 1:2:4 type B1 using 20 mm graded stone aggregate for cover slab set in and pointed in CM 1:6 including necessary formwork complete all as specified and directed.
S & F TMT bars 10 mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for PCC Coping in PCC 1:3:6 type C1 using 20mm graded aggrgate including chamfered edges all as specified and directed
Dismantling plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings.complete all as specified and directed.
S & F Pre painted galvalume aluminium zinc coating GI based corrugated steel 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.
S & F Pre painted galvalume aluminium zinc coating GI plain steel 0.50 mm thick of any colour having tensile strength of 550 Mpa as in ridge , fixed with self tapping screws as specified and dkirected by Engr in Charge.
Dismantling of wall and ceiling boards ( fiber pulp insullation etc ) or insullation boards / slabs / wall lininig , blankets any thickness including cover fillets & snapgrid framework complete all as specified and directed
S & F Anodised aluminium snap grid of size 605 x 605mm as frame work for false ceiling and PVC insulation panels 10mm thickness with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made with aluminium .complete all as specified and directed.
S & F of 5 mm thickness wall lining / panelling ,colour PVC sheet, solid sheet inclusive of solvent cement and fixing at site, for wall paneling /lining inclusive of fixing on walls over and incl PVC fillet 35 mm thick fixing of wall incuding corner on edges of opening as per specification etc directed by Engr in Charge.
Taking down and refixing in the same opening MS door shutters exc 1.5 sq. m but n exc 4 sq. m each panel, with welding riveting, pivets, hinges and proper allinment of locking arrangement of shutter etc and making good surface of concrete pillar with PCC complete all as specified & directed by Engr in Charge.
S & F in repairs 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including short lengths, with all pipe fittings such as ends, elbows, unions, hose clips etc. and fixing to walls etc, complete with saddles (snap clips), wall clips, hooks, protective mild steel tube sleeves and cutting through walls, floors and their making good and also cutting, screwing and waste.complete all as specified
Dismantling structural steel work including doors, gates (ie, dismantling of corroded portion of gates/doors etc) complete all as specified
S&F MS work in tubular trusses/ rafter/ purline inclluding special shaped washer etc complete using ERW or induction but welded tubes confirming to IS 1161-1979 Grade 240 complete all as specified and directed.
Dismantling old fencing wire mesh, any type complete all as specified
Supply only chain link galvanised over PVC coated , of mesh size 50 x 50 mm complete all as specified and directed by Engr in Charge .
Fixing only chain link fencing including line wires, any mesh, any type of standards, rails, straining bolts, etc. including provission of binding wire. complete all as specified and as directed
S & F in repairs galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)
Supply and fixing in repairs crossed spiral concertina coil 610mm dia/ 1000 mm dia , made up of 2.6mm HTGS spring core wire having tensile strength of 1600 N/Sqmm and punched tape of 0.5 mm thick and 13 mm wide after crimming. punched tape shall be of hot dipped galvanised min 20 micron and having medium barbs of 24mm width @ 35mm centre to centre. Each concertina coil shall be of min 50 turns and 5 clips in two turns ( weight of coil 8 Kg to be stretched up to 6-8 mtr i e 1.14 Kg/ RM) complete all as spd & directed.
S K ENGINEERS
BOB ENTERPRISES
GRAND COOL SOLUTIONS
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .