REPAIR/MAINT OF JOINERY, PLUMBING, TILING AND MISC WORK IN MD/OTM ACCN IN ACCN ZONE C UNDER GE ROORKEE

Amount

Taking down shutters of any description exc 1 sqm and not exc 2 sqm each and refixing in same opening complete including dismantling and repair all as specified and directed.

Taking down shutters of any description not exc 1 sqm each and refixing same opening complete dismantling and repair all as specified and directed.

Taking down shutters of any description exc. 1 Sqm and nexc. 2 Sqm each complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutter from the frame) not exc 1.50 Sqm each including wooden/ steel windows & ventilators with grills/guard bars (if any) complete all as specified and directed .

Taking down chowkhat or frames with shutters (without taking off shutter from the frame) exc 1.50 Sqm but n.exc 4.00 Sqm each complete all as specified and directed .

M&L powder coated Anodised aluminium frame for doors, windows, ventilators, partition walls etc with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F powder coating of any colour (Thickness or powder coating not less than 50 micron) Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m (min) including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc only aluminium section weight will be considered complete all as specified and directed.

S&F powder coating of any colour (Thickness or powder coating not less than 50 micron) anodised aluminium window and ventilator shutters, slide/side hung type without sash bars, aluminium sections weighing 0 .55 kg/m including necessary joining cleats, glazing clips, rubber packing, (min) anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) only aluminium section weight will be considered complete all as specified and directed.

S&F aluminium powder coated grill 2"x2" aparture of weight not less than 2.5 Kg per Square metre fixed in aluminium windows complete all as specified and directed.

S&F stainless steel (grade-304) grills made of hollow tubes section including welding, grinding, buffing polishing and making curvatures wherever required and fitting the same with necessary holdfasts/SS dash fastners with nut & bolts of required size, complete all as specified and directed.

S&F 5.5 mm thick plain, ordinary quality sheet glass and glazing with rubber packing in aluminium frame of door and window in any size in each pane complete all as specified and directed.

S&F in repairs, door closer hydraulically regulated, alluminium (extruded section body), designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg complete all as specified and as directed.

S&F in repairs, double action floor spring hydraulically regulated made of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel, heavy duty complete all as specified and directed.

Taking down Alluminium door/ window complete shutter with/ without frame as per requirement (incl S&F hinges/any type hinges/ screw/ rubber binding if required) and refixing to frame / wall and complete all as specified and directed.

Cutting holes in brick walls exc half brick wall but n exc one brick wall built in cement mortar or cement lime mortar and stone walls built in lime mortar or for inserting holdfasts and making good dismantled portion in CM ( 1:3 ) or cement concrete (1:2:4) type B1 as required complete all as specified and directed.

S&F solid PVC door frame of size, 50X47mm, made out of 5mm thick plain colour PVC sheet, reinforced with MS square tube fixed with screw/plugs to brick walls complete all as specified and directed.

S & F pressed steel frame size 105x60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate,etc complete all as specified supplied and fixed.

S & F pressed steel frame size 125x60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate,etc complete all as specified supplied and fixed.

M&L for Cement Concrete in Filling of pressed steel frame, M20, 20mm graded stone aggregate, complete all as specified and directed

S&F M.S work as in holdfasts., wind ties , plane angle cleats for securing purlins to wooden trusses or rafters etc.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S & F FACTORY MADE 30 mm thick 2nd class HW glazed skeleton shutter divided into square with plain chamfered or rounded with sash bars open rebated and prepared to receive glass/gauge etc. with plain chamfered rounded fitted with cut and mitred beads size of members of window, ventilator shutters, etc. are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24 (a) and fitted to chowkhat complete all as specified and directed .

S & F FACTORY MADE 30 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides including fixing of rubber door cills, complete all as specified and directed..

S & F Factory Made Steel windows with side hung shutters incl box type hinges with steel handles and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed.

S & F Factory Made Steel windows with side hung shutters incl box type hinges with steel handles and steel peg stay complete without glazing bars dovetailed or welded complete all as specified and directed.

S&F Factory made steel ventilator with top hung shutter incl hinges, steel peg stay complete all as specified and directed.

S&F mild steel framed work such as grills, grating etc with ends of bars shouldered and or riveted or forged in spikes, framed guard bars, barred iron doors, ladders, framed balusters, railings and similar conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F FRP door frames three legged of cross section 90x45mm having single rebate 32mmx15mm. The laminated door frame moulded with fire retardant grade unsaturated polyester resin and chopped mat. Door frame laminated shall be 2mm thick, frame shall be covered with fiber glass from all sides ms flat iron 25x3mm shall be provided at the bottom to steady the frame including PCC 1:2:4 Ty B0 using 12.5mm graded stone aggregate as in frame, complete all as specified and directed.

S&F 30mm thick FRP paneled door shutter made with fire retardant grade unsaturated polyester rain moulded to 3mm thick FRP laminated for farming hollow rails and styles with wooden frame with ms tube frame of 29 gauge all around the style and middle rail duly coated with steel primer, cast monolithically with 5mm thick FRP laminate for panels and conforming to IS 14856-2000 complete all as specified and directed

S & F of 3 mm thick plain, ordinary quality sheet glass and glazing with oil putty or fixed in square not exc. 0.5 sqm in each pane complete all as specified and directed.

Hacking out old broken glass of any thickness/size or quality from wooden/metal frame fixed with putty/beading & S&F 3mm thick sheet glass, plain ordinary quality not exc 0.5sqm in each pane with and incl putty/beading complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel staples or by wooden beads or fixed in steel windows by screws complete all as specified and as directed.

All as per item No 32.00 above but in repair.

S&F 100 mm size cold rolled mild steel butt hinges ISI marked, medium weight complete all as specified and directed.

All as per item 34.00 above but 75mm.

S&F 150 mm size aluminium barrel tower bolts (ISI Marked) of extruded section and fixed to shutter complete all as specified and directed.

All as per item 36.00 above but 100mm.

S&F 150 mm size aluminium handle (ISI Marked) of extruded section and fixed to shutter complete all as specified and directed.

All as per item 38.00 above but 100mm.

S&F rubber door cill 40/50mm as required in door cill complete with required nails etc complete all as specified and directed.

S&F door seal brush with aluminium holder length 85 CM to 90 CM complete with required nails etc complete all as specified and directed.

M & L for replacement of wooden glazing beading not exc 3 sq cm of sectional area of 2nd class hard wood straight (any size) finished wrought of glazing or gauged joinery for fixing wire gauge/securing glass pane complete all as specified and directed.

M & L Vitrified coloured ceramic tiles double charged, 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per item No 43.00 above but for vertical surface like dado, skirting etc with 10mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L for non skid joint free coloured ceramic tiles 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick screed bed in CM 1:6 including Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for joint free coloured glazed ceramic tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:4 including Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide paint complete all as specified and directed.

M & L for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M & L for preparation of old painted steel and iron surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L preparation of old painted work of wood and wood based surfaces by knotting, stopping etc of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

Easing of wooden window shutters /CB shutters (One unit shall comprise of one window/CB/Showcase irrespective of number of leaves) for properly closing/opening, fixing of stays, cleat etc, tightening of hinges or changing the position of hinges, adjustment of tower bolts, sliding bolt etc. complete all as specified and directed.

Easing of wooden door shutters (One unit shall comprise of one door shutter irrespective of number of leaves) for properly closing/opening, fixing of stays, cleat, door stopper etc, tightening of hinges or changing the position of hinges, adjustment of tower bolts sliding bolt etc. complete all as specified and directed.

Easing of steel window shutters (One unit shall comprise of one window irrespective of number of leaves) for properly closing/opening, welding of hinges or handles (including of handles/ hinges if required) or changing the position of hinges, complete all as specified and directed.

S&F in repair Mild steel cold rolled butt hinges, medium weight, 75mm long, complete all as specified and directed.

S&F in repair Mild steel cold rolled butt hinges, medium weight, 100mm long, complete all as specified and directed.

S&F in repair Aluminium anodised barrel tower bolt of extruded section, 100mm long complete all as specified and directed.

S&F in repair Aluminium anodised barrel tower bolt of extruded section, 150mm long complete all as specified and directed.

S&F in repair Aluminium anodised barrel tower bolt of extruded section, 200mm long complete all as specified and directed.

S&F in repair 100mm long aluminium handle, cast type, anodised complete all as specified and directed.

S&F in repair 150mm long aluminium handle, cast type, anodised complete all as specified and directed.

S&F in repair Mild Steel sliding door bolts, 250 mm long, plate type, stove enamelled black, with bright bolts not less than 12mm dia with & including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate etc complete all as specified and directed.

S&F in repair 300 mm long MS ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F 18mm thick pre laminated colour PVC sheet for cup board incl frame & fixed at site including PVC beading half round decorative type including hasps, stapples, continuous piano hinges, cup board knobs etc all as required complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in cement mortar (1:6) using course sand confirming to IS 2116-1980 including demolition of existing unserviceable brick work complete all as specified and directed.

Taking down old cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, rubbish off the premises etc complete all as specified.

M&L for 15 mm thick rendering in cement mortar (1:6) on brick work or concrete surfaces of walls, finished even and fair (without using extra cement) complete all as specified and directed.

M&L for rendering to external surfaces of brick/concrete surfaces, 15mm thick in cement mortar 1:4, surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparing new plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali-resistant primer complete all as specified and as directed.

M&L preparing new surfaces of WALLS by brooming down or by steel wire brushing and applying one coat of oil bond distemper emulsion by using rollers over a coat of primer of same make suitable for distemper oil emulsion complete all as specified and directed.

S&F in repairs, 25 mm dia stainless steel fancy type curtain rod in suitable size with and including stainless steel fancy type brackets, stops of matching colour and necessary curtain rings, side caps etc complete all as specified and directed. Note: The quoted rate is deemed to be included for 01 pair of brackets for length of door/window/opening.

S&F in repairs of bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed of 15 mm bore minimum weight 105gms complete all as specified and directed.

S&F in repairs Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-110gms) complete all as specified and directed.

S&F in repair 15 mm bore stop valves/ angle valve of PTMT screwed down high pressure, with crutch or capastan head screwed both ends (minimum weight 90 Gms) complete all as specified and directed.

S&F in repair shower of PTMT any colour including shower arm 125mm size 15mm bore pipe complete all as specified and directed.

S&F in repairs shelf of PTMT fixed with and including chromium plated brass screws and wooden plated brass screw and wooden/ plastic cleats (minimum weight 300 gms) complete all as specified and directed.

S&F in repairs PTMT waste fitting 32mm bore for WHB and kitchen sink (Minimum weight 45 gms) complete all as specified and directed.

S&F in repairs ball valves of 15 mm bore high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs ball valves of 20 mm bore high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs Grating doom 75/100 mm dia of PTMT( with or wihout hole) (Minimum weight 25 gms) complete all as specified and directed.

S&F in repairs brass chromium plated bib tap for iron pipe of 15mm bore fancy type foam flow with crutch or butterfly handle, screwed down high pressure complete all as specified and directed.

S&F in repairs 15mm dia brass chromium plated pillar tap foam flow with fly nuts capastan head screwed down high pressure with or without lettered hot or cold with long scewed shank complete all as specified and directed.

S&F in repairs stop cock 15 mm bore ISI marked fancy type (Concealed) cast copper alloy, screw down high pressure with crutch or butterfly handle screwed both ends suitable for iron pipe of 15mm bore complete all as specified and directed.

S&F in repairs stop/angle cock 15 mm bore ISI marked fancy type chromium plated, screw down high pressure with crutch or butterfly handle screwed both ends suitable for iron pipe of 15mm bore complete all as specified and directed.

S&F in repairs chromium plated cast copper alloy 2-way angle cock with flange suitable for 15mm bore pipe complete all as specified and directed.

S & F in repair Brass CP wash hand basin mixer incl copper nipple for connecting with PVC connection 15mm for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S & F in repair wall mixer Non Telephonic with'L' bend (Provision for OH shower) 15mm for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S & F in repair wall mixer with 3 in 1 Telephonic with crutch (Provision for over head shower and hand shower) 15mm for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repairs CP brass shower rose 150mm size shower with 300mm arm suitable for 15mm bore pipe complete all as specified and directed.

S&F in repairs, PVC connection 450/600mm long with brass check nuts & washers at both ends suitable for 15mm bore pipe complete all as specified and directed.

S&F in repairs, 32mm dia brass CP waste fitting for WHB and fixed complete all as specified and directed.

S&F in repairs waste fitting (coupling) brass CP for stainless steel sink of size 40/50 mm bore complete all as specified and directed.

S&F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, Aluminium brackets for bottom support fixing with gitties embeded in wall with drilling machine etc complete all as specified and directed.

Dismantling of Cast Iron pipe/PVC pipe up to 100 mm bore complete all as specified and directed.

Dismantling of Cast Iron pipe/ RCC drain pipe/PVC pipe up to 150 mm bore complete all as specified and directed.

S&F PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F PVC (SWR) bends suitable for 110mm bore pipe complete all as specified and directed.

S&F PVC (SWR) bends suitable for 75mm bore pipe complete all as specified and directed.

S&F PVC (SWR) branch piece (single or double) suitable for 110mm bore pipecomplete all as specified and directed.

S&F PVC (SWR) branch piece (single or double) suitable for 75mm bore pipecomplete all as specified and directed.

S&F in repairs, 32mm dia bore PVC flush pipe for connecting low level flushing cistern including jointing to WC seat of any type complete all as specified and directed.

S&F in repairs 32/40mm bore and 75cm long PVC waste pipe for WHB complete all as specified and directed.

S&F in repair PVC waste pipe of standard pattern, not less than 75cm long, 32/40mm dia for steel sink including waste coupling for sink/ urinal of suitable size complete all as specified and directed.

Dismantling and taking down existing RCC/PVC water tank and S&F Rotational moulded polyethlene white water storage tanks (ISI marked) (cylindrical vertical with closed top) triple layer of 500 Ltrs capacity including 20mm dia bore PTMT ball valve, hoisted and fixed in position and making all necessary connections with and including connectors of suitable size complete all as specified and directed.

All as per item No 104 above but 1000 ltrs capacity.

S&F in repairs HDPE PVC lid (cover) for 500 Ltrs capacity PVC tank complete all as specified and directed.

All as per item No 106 above but 1000 ltrs capacity.

S&F in repairs, 15mm bore GI tubing (ISI marked), medium grade with all fittings and fixed to walls and ceilling or laid in flooring including connection etc including taking down old tubing complete all as specified and directed.

All as per item No 108 above bur for 20mm bore pipe.

Fixing only 15 mm bore tubes and connections medium grade in new or old position to walls, ceiling or laying in floors including taking up or down existing tubing complete all as specified and directed

All as per item No 110 above bur for 20mm bore pipe.

S&F in repairs Vitreous China urinals,bowl type flat back of size 590 mm x 375mm x 390 mm white (minimum) with CP waste fitting grating and union for discharge pipe (excluding flusing cistern, flush pipe) including urinal spreader of CP and PVC waste pipe of adequate length and providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; complete all as specified and directed.

S&F in repairs stainless steel sink, 1.00 mm thick for kitchen or laboratory with plug waste pipe washers, incl cantilever cast iron brackets, connecting union, waste coupling etc overall size 495x420 mm with bowl size 410x330x160 mm complete all as specified and directed.

S&F in repairs sink with drainage board made of stainless steel 1 mm thick for kitchen or laboratory with plugs washers and waste coupling including bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915x460 mm bowl size 410x330x160 mm complete all as specified and directed.

S&F in repairs, plastic water closet (EWC) seat cover white closed pattern with flat bottom and cover including mild steel chromium plated hinging device complete all as specified and directed.

S&F in repairs, vitreous china wash down water closet pan (Pedestal pattern) white incl 'P' or 'S' trap and making good the disturbed surface to match with the existing flooring complete all as specified and as directed.

S&F in repairs, health faucet 8 mm dia 1.20 mtr long flexible tube and wall hook complete all as specified and directed.

S&F in repairs Jet Spray with 1.20 Mtr tube complete all as specified and directed.

M & L in repairs for 75mm PVC floor trap, with grating including jointing to waste pipe with solvent cement complete all as specified and directed.

S&F in repairs, vitreous china squatting pan 'Orissa pattern' long pan of size 580x440mm white, with integral footrest & 'P' or 'S' trap including connection to trap, flushing pipe, anti-syphonage pipe etc and making good the floor to match with the existing surfaces complete (excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F in repairs, hung vitreous china wash down water closet including self close seat cover white incl 'S' trap etc and making good the floor to match with the existing surfaces complete (excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F in repairs, vitreous china wash hand basin, white flat back size 550 x400 mm excluding pillar tap but including waste coupling, waste pipe and a pair of MS bracket painted with 02 coats of synthetic enamel paint over 01 coat of red oxide primer etc complete all as specified and directed.

S&F in repairs vitreous china wash hand basin with pedestal size 565x430x845mm complete all as specified and directed.

S&F in repairs, looking mirror 5 mm thick with and fixed with chromium plated brass screwes and cup washers complete all as specified and directed.

S&F in repairs Cabinet Mirror (400mm x 500mm) complete all as specified and directed.

S & F in repairs for stainless steel peg set of six complete all as specified and directed.

S&F in repairs, brass chromium plated 600mm long and 20mm dia towel rail 'D' type, fixed to wall with CP steel screws with wooden gutties etc complete all as specified and directed.

S&F Stainless steel cromium plated Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness laid bedded and pointed in moratr in floors, aprons etc complete all as specified and directed..

M & L for granite 18-20 mm thick (table rubbed and polished) as in steps, jambs, pillars, window-cills, cooking platforms and like set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding / edge polishing of front side complete all as specified and directed.

M&L Machine cut kota stone slab flooring 20-22mm thick over and incl 15mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab with 100mm wide marble border if required including rubbing and polishing complete all as specified and directed.

All as per item No 131.00 above but for skirting with 10mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L applying a coat of 1 mm thick wall care putty as per manufacture instruction complete complete all as specified and as directed.

M&L preparing old surfaces of WALLS by brooming down or by steel wire brushing and applying one coat of oil bond distemper emulsion by using rollers over a coat of primer of same make suitable for distemper oil emulsion complete all as specified and directed.

Preparing old painted surfaces by washing, rubbing down and stopping of painted surfaces and applying one coat of cement base paint on surfaces of walls/ceilings complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) of any description and laid in ground floorts/paving n.exc 150mm thick complete all as specified and directed.

M&L 75mm thick Cement concrete type D - 2, 1:4:8 (40mm graded aggregate) as in sub base etc. complete all as specified and directed

M&L PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in floor, hard standing, plinth protection etc 75 mm thick finished even and smooth without using extra cement laid in alternate bays n-exc 2.50 Sqm complete all as specified and directed.

Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing) laid bedded and pointed in any mortar and removal of old tiles from the premises complete all as specified and directed

nautiyalandcompany (BID ID -3067678)

AMAR NATH SHARMA (BID ID -3068771)

Alankar Traders (BID ID -3058584)

VINAYAK CONSTRUCTION COMPANY (BID ID -3061328)

M/S GIRI CONSTRUCTION CO. (BID ID -3055473)

shreyansh construction (BID ID -3060604)