C/o Additional Indoor Ward Block in Civil Hospital Palampur Distt. Kangra (HP) (SW- C/O Parking at Civil Hospital Palampur i/c Water Supply, Site Development and Septic Tank)

Excavation in soil in Hilly Area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with a lift upto 1.5 m and a lead upto 20 m as per Technical Specification Clause 1603.1 with in all leads, lifts and other incidental as per the direction of Engineer-in- Charge.The rate including of octroi, royality, malkana, tolltax, GST or other taxes imposed by the Government.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m (One point five metre) in width or 10 sqm (Ten square metre) on plan, including dressing of sides and ramming of bottoms, lift upto 1.5 m (One point five metre), including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m (Fifty metre) including carriage of materials within all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Back filling granular material behind R/Wall, abutment wing wall and return wall complete as per drawing and technical specifications clause 1204.3.8 including carriage of materials within all leads and lift and other incidentals as per the direction of Engineer-in- Charge.The rate including of octroi, royality, malkana, tolltax, GST or other taxes imposed by the Government.

Providing weep holes in brick mansonry/ stone masonry / plain reinforced concrete abutment, wing wall, return wall with 100mm (one hundred millimetre) dia PVC pipe extending through the full width of the structures with slop of 1 (v) : 20 (H) towards drain face complete as per drawing and technical specification clause 614, 709, 1204.307 including carriage of materials within all leads and lift and other incidentals as per the direction of Engineer-in- Charge.The rate including of octroi, royality, malkana, tolltax, sale tax or other taxes imposed by the Government.

Supplying and filling in plinth with sand /stone under floors, including watering, ramming, consolidating and dressing complete, including carriage of materials within all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three point one five millimetre) thick, welded with angle iron in frames of 30mmx30mmx5mm (Thirty into thirty into five millimetre), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. (four metres)and removal of the same for in-situ reinforced concrete and plain concrete work in foundation, footings, bases of columns etc. and mass concrete as per the entire satisfaction and direction of Engineer-in-Charge. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three point one five millimetre) thick, welded with angle iron in frames of 30mmx30mmx5mm (Thirty into thirty into five millimetre), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in coulmns, Pillars, piers Abutments, Posts and struts as per the entire satisfaction and direction of Engineer-in-Charge. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron frame 30x30x5mm (Thirty into thirty into five millimetre), so as to give a fair finish including centering shuttering, strutting and propping etc. with wooden battens and ballies heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Suspended floors, roofs, landings, balcomniers and access plat form as per the entire satisfaction and direction of Engineer-in-Charge. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm thick (Three point one five millimetre), welded with angle iron in frames of 30x30x5mm (Thirty into thirty into five millimetre), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Lintels, beams, plinth beams, girders, bressumers and cantilevers and lintels upto all depth as per the entire satisfaction and direction of Engineer-in-Charge. .The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm thick (Three point one five millimetre), welded with angle iron in frames of 30x30x5mm (Thirty into thirty into five millimetre),so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Edges of slabs and breaks in floors and walls under 20 cm (Twenty centimetre) wide as per the entire satisfaction and direction of Engineer-in-Charge. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm thick (Three point one five millimetre), welded with angle iron in frames of 30x30x5mm (Thirty into thirty into five millimetre), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Stairs, (excluding landings) except spiral stair cases as per the entire satisfaction and direction of Engineer-in-Charge.The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm thick (Three point one five millimetre), welded with angle iron in frames of 30x30x5mm (Thirty into thirty into five millimetre), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Small lintels not exceeding 1.5 m (one point five metre) clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like as per the entire satisfaction and direction of Engineer-in-Charge.The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm thick (Three point one five millimetre), welded with angle iron in frames of 30x30x5mm (Thirty into thirty into five millimetre), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Vertical surfaces. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and laying cement concrete 1:6:12 (One cement: Six sand: Twelve graded broken/crushed stone aggregate) 40mm (forty millimeters) nominal size mechanically mixed and curing complete, excluding cost of form work in foundation and plinth. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and laying in position cement concrete of specified grade 1:4:8 (One Cement : Four coarse sand : Eight graded stone aggregate) 40 mm (Forty millimetre) nominal size excluding the cost of centering and shuttering - All work up to plinth level with in all leads, lifts and other incidental as per the Direction of Engineer-in-Charge.The rate is including octroi, royality,GST, toll tax, or other taxes imposed by the Government.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering-All work up to plinth level 1:2:4 (one Cement : two coarse sand : four graded stone aggregate twenty millimetres nominal size) with in all leads, lifts and other incidental as per the direction of Engineer-in- Charge.The rate including of octroi, royality, malkana, tolltax, GST or other taxes imposed by the Government.

Reinforced cement concrete work in beams, suspended mfloors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:2:4 (one cement : two coarse sand : four graded stone aggregate) 20 mm (twenty millimetre) nominal size with in all leads, lifts and other incidental .The rate is including octroi, royality,GST, toll tax, or other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed design mix M-25 (M-Twenty Five) grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. All works upto plinth level. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed design mix M-25 (M-Twenty Five) grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. All works above plinth level upto floor all level. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Steel reinforcement Thermo-Mechanically Treated bars of grade Fe-500 D or more of Tata/ Sail for Reinforced cement concrete work including straightening, cutting, bending, placing in position and binding all complete up to and above plinth level as per direction of Engineer-in-charge. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and laying damp-proof course 100 mm (One Hundred millimetre) thick with cement concrete 1:2:4 (One cement : Two coarse sand: Four graded stone aggregate 12.5mm ( Twelve point five millimetre) nominal size) as per direction of Engineer-in-charge. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg (One point seven kilogam) per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil as per direction of Engineer-in-charge. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing plinth protection with 60 mm( sixty millimetre) thick interlocking paver/ CC paver block with 23 cm (twenty three centimetre) dia half round stone ware pipe for drainage purpose fixed on 1:5:10 (one cement: five sand : ten graded crushed stone aggregate 40mm (forty millimeters) nominal size for bedding of pipe and covered with structural steel.The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing stone filling/ brick aggregate filling in drpression slab portion or under soak pit including entire carriage of materials. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (Seven point Five) in superstructure above plinth level up to floor all level in all shapes and sizes in :C.M.(Cement Mortar) 1:6 (one cement : six coarse sand). The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (Seven point Five) in foundations and plinth in CM (cement Mortar)1:4 (one cement : four coarse sand). The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (one cement : six coarse sand : twelve graded stone aggregate) 20 mm (Twenty millimetre) nominal size upto plinth level with : Cement mortar 1:6 (one cement : six coarse sand). The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (one cement : six coarse sand). The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

6 mm (six millimetre) cement plaster to ceiling with Cm 1:3 (one cement: three sand). The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

15 mm (fifteen millimetre) cement plaster in single coat on rough side of brick/ stone masonry for interior plaserting upto floor two level with Cm 1:6 (one cement:six sand). The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

15 mm (fifteen millimetre) cement plaster in single coat on fair side of brick/ stone masonry for interior plaserting upto floor two level with Cm 1:6 (one cement:six sand).The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

15 mm (fifteen millimetre) cement plaster in single coat on fair side of brick/ stone masonry for interior plaserting upto floor all level with Cm 1:5 (one cement:five sand).The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

15 mm (fifteen millimetre) cement plaster in single coat on rough side of brick/ stone masonry for interior plaserting upto floor two level with Cm 1:4 (one cement:four sand). The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and fixing Powder coated anodised aluminium extrusion section of Jindal/Hindalco aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS: 733 and IS: 1285, anodized transparent or dyed to require shade accordingly to IS:1868 (minimum anodic coating of grade AC 15) fixed with raw plugs and screws or with fixing clips , necessary filling up of gaps and junctions at top ,bottom and sides with required with PVC/neoprane filles etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically where ever required including clests angle, aluminium, snap beading for glazinge/panelling C.P. brass/stainless steel screws all complete as per Architectural drawings and the directions of Engineer-In-Charge for doors windows and ventilatiors and glazed partitions frames.. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and fixing Powder coated aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) for shutters of doors ,windows & ventilator i/c providing and fixing hinges/pivots and making provision for fixing of fittings whereever powder coated aluminium (minimum thickness powder coating 50 micron) with in all leads, lifts and other incidental as per the direction of Engineer-in- Charge.The rate including of octroi, royality, Malkana, tolltax, GST or other taxes imposed by the Government.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm (five millimetre) thickness (weight not less than 12.50 kg/ sqm) sqm with in all leads, lifts and other incidental as per the direction of Engineer-in- Charge.The rate including of octroi, royality, malkana, tolltax, GST or other taxes imposed by the Government.

Providing and fixing Fly proof stainless steel grade 304 wire gauge with 0.5 mm (zero point five millimetre) dia. wire and 1.4mm (one point four millimetre) wide aperture with matching wood beading complete in all respect.with in all leads, lifts and other incidental as per the direction of Engineer-in- Charge.The rate including of octroi, royality, malkana, tolltax, GST or other taxes imposed by the government.

30 mm (thirty millimetre) thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm (sixty into thirty millimetre) and wall thickness 2 mm (two millimetre) (± 0.2 mm), with inbuilt decorative moulding edging on one side. The stylesand rails mitred and joint at the corners by means of M.S. galvanised/ plasticbrackets of size 75x220 mm (seventy five into two hundred twenty millimetre) having wall thickness 1.0 mm (one millimetre) and stainless steelscrews. The styles of the shutter reinforced by inserting galvanised M.S. tubeof size 25x20 mm(twenty five into twenty millimetre) and 1 mm (one millimetre) (± 0.1 mm) wall thickness. The lock rail made up of'H' section, a uPVC hollow section of size 100x30 mm (one hundred into thirty millimetre)and 2 mm (two millimetre) (± 0.2 mm)wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S.'U' cleats. Theshutter frame filled with a uPVC multi-chambered single panelof size not less than 620 mm, having over all thickness of 20 mm (twenty millimetre) and 1 mm (one millimetre)(±0.1 mm) wall thickness . The panels filled vertically and tie bar at two places bynserting horizontally 6 mm (six millimetre) galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge.with in all leads, lifts and other incidental as per the direction of Engineer-in- Charge.The rate including of octroi, royality, Malkana, tolltax, GST or other taxes imposed by the Government.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of 35 mm (thirty five millimetre) thick including ISI marked Stainless Steel butt hinges with necessary screws with in all leads, lifts and other incidental as per the direction of Engineer-in- Charge.The rate including of octroi, royality, malkana, tolltax, GST or other taxes imposed by the government.

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. including carriage of materials within all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and fixing aluminium anodised powder coated pattern to existing window/ventilatior with 80mmx80mm (Eighty into eighty milimetre) panels holes with 25x8mm (Twenty five into eight milimetre) thick aluminium flat in windows and ventilators including fixing with aluminium screws or bolts and nuts complete in alluminium channels base frames (Aluminium channels base frames to be measured and paid for separately including carriage of materials within all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and laying 40mm thick rubbed Red Sand Stone 55x55/55x27.5cm(fifty five into fifty five/ fifty five into twenty seven decimal five centimetre) flooring laid on 20mm (twenty millimetre) thick base of cememt mortar 1:5 ( one cement: five coarse sand) with joints 3 mm (three millimetre) thick side buttered with cement mortar 1:2 (one cement:two stone dust) and mixed with pigment to match the shade of stone and pointing with same mortar including carriage of materials within all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and laying 40mm (forty millimetre) thick rubbed Red Sand Stone Dado of approved make in all colours & shade, in skirting, risers of steps, over 12 mm.(twelve millimetre) thick bedof cement mortar(onecement:three coarse sand ) jointed with grey cement slurry @3.3 kg/sqm (three point three kilogram per square metre) including grouting the joints with white cement mixed & mixed with pigment to match the shade of the slabs including rubbing and polishing complete including carriage of materials within all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and laying heavy duty parking tiles 40x40 cm (Forty into forty centimetre) of Nitco/Kajaria/ Somany/Orient Bell tiles as per approved shade of this office over 12 mm (twelve millimetre) thick base of cement mortar 1:3 (one cement: three sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete including carriage of materials within all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and laying heavy duty parking tiles 40x40 cm (Forty into forty centimetre) of Nitco/Kajaria/ Somany/Orient Bell tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08% and confirming to I.S. 15622, of approved make, in all colours and shade, in skirting, risers of steps, over 12 mm. thick bed of cement mortar 1:3 (one cement: three coarse sand) , jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement & matching pigment etc. complete including carriage of materials within all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and laying antiskid Ceramic tiles of size 300x300mm (Three hundred into three hundred millimetre)of premium quality of Nitco/ Kajaria/ Somany/ Bell of approved make in all colours and shades in for outdoor floors such as footpath , courtyard multi modals location, toiles etc. laid on 20mm thick base (twenty millimetre) of cement mortar 1:4 (one Cement : four Coarse sand), in all shapes and patterns including grouting the Jointing with white cement and matching pigment etc., complete as per direction of Engineer-in- Charge including all leads and carriage of material. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and laying 300x450 mm ( Three hundred into four hundred fifty millimetre) cremic glazed tiles Dado of Kajaria/Orient/Nitco/Somany of approved make in all colours & shade, in skirting, riser of steps, over 12 mm (Twelve millimetre) thick bed of cement mortar 1:3 (one cement: three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (three point three kilogram per square metre) including grouting the joint with white cement & matching pigments etc. complete in all respect. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and fixing Kota stone slabs single slab with double roung nosing over 20 mm (twenty millimetre) thick ibase of cement mortar 1:4 (one cement: four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer including carriage of materials with in all leads, lifts and other incidental. The rate includes octroi,royality,Malkana,Tol tax, GST or any other taxes imposed by the Government.

Wall painting with Apex weather proof exterior emulson of Asian Paint/ exterior Emulsion of Nerolac Suraksha exterior emulsion paint of approved brand and manufacture to give an even shade.Two or more coats on new work. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Applying JK/Birla white care wall putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete up to any lead,,lift and other incidentals.The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Wall painting with stain enamel paint of approved brand and manufacture to give an even shade for Interior New work (Two or more coats).The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Applying Priming Coat With ready mixed pink or Grey primer on wood work (hard and soft wood) of approved brand and manufacture, with in all leads, lifts and other incidental .The rate includes octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture including carriage of materials with in all leads, lifts and other incidental. The rate includes octroi,royality,Malkana,Tol tax, GST or any other taxes imposed by the Government.

Distempering with Acrylic washable distemper of Asian/ Nerolac to give an even shade New work (two or more coats) over and excluding priming coat with cement primer including carriage of materials with in all leads, lifts and other incidental. The rate includes octroi,royality,Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and fixing railing for stair having baluster of 35 mm (|thirty five milimetre) Dia SST (Stainless steel) pipe welded 50 mm (Fifty milimetre) dia SST (Stainless steel) pipe with a clear height of 85 cm (Eighty five centimetre) @ 60 cm c/c ( sixty centimetre center to center) emended in cement concrete step and jointing with electric / gas welding at top along with hand rail of hollow SST pipe of 50 mm (Fifty milimetre) dia slip resistance vertical baluste welding/ jointed with each other with 2 Nos (Two numbers) SST pipe of 20x20mm (Twenty into twenty milimetre) complete including carriage of materials within all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and fixing railing over brick masonry having baluster of 50mm (|fifty milimetre) square hollow pipe welded 50 mm (Fifty milimetre) dia rectangular hollow pipe with a clear height of 50 cm (fifty centimetre) @ 60 cm c/c ( sixty centimetre center to center) emended in brick masonry with cement concrete and jointing with electric / gas welding at top along with top rail of hollow pipe of 50 mm (Fifty milimetre) rectangular vertical baluster welding/ jointed with each other with 2 Nos (Two numbers) flat 50x5 mm (Fifty into five millimetre) including painting complete within all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and fixing of expansion joint system related with wall joint (internal/external)location as per drawing and direction of Engineer-In-Charge. the joints shall be of extruded aluminium base members, self aligning/centering arrangement and support plate as per ASTM B221-02. The material shall be such that it provides an Expansion Joints System suitable for vertical wall to wall/ wall to corner application, both new and existing construction in office buildings and complexes with no slipping down tendency amongest the components of the Joint System. The Joint System shall utilize light weight aluminium profiles exhibiting minimal exposed aluminium surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall confirm to ASTM 6063 within all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and fixing aluminium sliding door bolts of size 250x16 mm (Two hundred fifty into sixteen millimetre), ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete . The rate is including octroi, royality,GST, toll tax, or other taxes imposed by the Government.

Providing and fixing aluminium tower bolts of size 250x10 mm (Two hundred fifty into ten millimetre) ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 300x10 mm with in all leads, lifts and other incidental as per the direction of Engineer-in- Charge.The rate including of octroi, royality, malkana, tolltax, GST or other taxes imposed by the Government.

Providing and fixing aluminium tower bolts of size 100x10 mm (One hundred into ten millimetre) ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 300x10 mm with in all leads, lifts and other incidental as per the direction of Engineer-in- Charge.The rate including of octroi, royality, malkana, tolltax, GST or other taxes imposed by the Government.

Providing and fixing aluminium handles 125 mm (one hundred twenty five millimetre), ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : with in all leads, lifts and other incidental as per the direction of Engineer-in- Charge.The rate including of octroi, royality, Malkana, Tolltax, GST or other taxes imposed by the Government.

Providing and fixing aluminium handles 100 mm (one hundred millimetre), ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : with in all leads, lifts and other incidental as per the direction of Engineer-in- Charge.The rate including of octroi, royality, Malkana, Tolltax, GST or other taxes imposed by the Government.

Providing and fixing oxidised M.S. casement stays(straight peg type) with necessary screws etc. complete. including carriage of materials within all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and fixing white viterous china EWC water closet star S No 20044 ( S-10) of size 57x35x39 cm ( Fifty seven into thirty five into thirty nine centimetre) with Jet pressure and with 10 (Ten) litre low level PVC cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm ( Forty millimetre) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required of Hindware or Equavalent. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and fixing wash basin with C.I. brackets, of DELTA NO 10010 of size 55x40 Cm (Fifty five into forty centimetre) with pedestial of HINDWARE or euqavalent with, 32 mm (Thirty two millimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and fixing PVC waste pipe 32 mm (thirty two millimetres) dia Semi rigid pipe for wash basin sink including P.V.C. waste fittings complete including all leads, lifts and other incidental as per the direction of Engineer-in- Charge. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and fixing 100 mm (One hundred millimetre) dia CP iron grating of ESS-KSS for nalhni trap . The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and fixing 600x450 mm (Six hundred into four hundred fifty millimetre) beveled edge mirior supperior glass (of approved quality) complete with 6 mm (six millimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and fixing 600x120x5 mm (Six hundred into one hundred twenty into five millimetre) glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm (forty millimetre) long screws, rawl plugs etc.,complete. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and fixing chromium plated brass soap dish of JAQUAR/CONTRA with C.P. brass brackets fixed to wooden cleats with C.P. brass screws. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and fixing 15 mm (fifteen millimetre)nominal bore CP brass long nose bib cock F-330011 HINDWARE/JAQUAR/CERA single control of approved quality confirming to IS standred . The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and fixing 15 mm (fifteen millimetre) nominal bore CP brass stop cock ( concealed) of standred design and approved F- 330043 of HINDWARE of approved quality confirming to IS standred.The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and fixing uplasticised PVC connection pipe with brass unions 45cm (forty five centimetre) long 15mm (fifteen millimetre) nominal bore . The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and fixing Polyethelene-Aluminium Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 ( one) metre spacing. This includes the costs of cutting chases and including testing of joints and making good the wall etc. complete, Concealed work, as per direction of the engineer in charge. 1216 mm (One thousand two hundred sixteen millimetre).The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and fixing Polyethelene-Aluminium Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 ( one) metre spacing. This includes the costs of cutting chases and including testing of joints and making good the wall etc. complete, Concealed work, as per direction of the engineer in charge. 2025 mm ( Two thousand twenty five millimetre).The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and fixing 20 mm (Twenty millimetre) nominal bore G.I. pipes complete with G.I. Fittings including trenching and refilling etc. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:5:10 (one cement : five coarse sand: ten graded stone aggregate) 40 mm (forty millimetre) nominal size under sevrage pipe 150 mm (One hundred fifty millimetre) dia. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and fixing 75 mm (Seventy five millimetre) Dia high pressure PVC spigot and socket soil, waste and ventilating pipes ISI Marked including fixing with approved adhesive etc. Complete.The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and fixing 110 mm (One Hundred ten millimetre) Dia high pressure PVC spigot and socket soil, waste and ventilating pipes ISI Marked including fixing with approved adhesive etc. Complete.The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and fixing 150 mm (One Hundred fifty millimetre) Dia high pressure PVC spigot and socket soil, waste and ventilating pipes ISI Marked including fixing with approved adhesive etc. Complete.The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and fixing 75 mm (Seventy five millimetre) Dia PVC Single Equal Branch with oval asses ISI Marked insertion rubber washer 3 mm (Three millimetre) thick bolt and nuts complete including fixing with approved adhesive etc. Complete. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and fixing 110 mm (One Hundred ten millimetre) Dia PVC Single Equal Branch with oval asses ISI Marked insertion rubber washer 3 mm (Three millimetre) thick bolt and nuts complete including fixing with approved adhesive etc. Complete. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive cost of cutting and making good the wall and floor etc. Complete for size 110x75 mm (one hundred ten in to seventy five millimetre). The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Constructing masonry Chamber 90x90x100cm (Ninety into ninety into one hundred centimetre) inside, in brick work in cement mortar 1:4 (one cement : four coarse sand) for sluice valve, with C.I. surface box 100 mm( One hundred miillimetre) top diameter, 160 mm (One hundred sixty millimetre) bottom diameter and 180 mm (One hundred eighty millimetre) deep ( inside) with chained lid and RCC top slab 1:2:4 mix (one cement : two coarse sand : four graded stone aggregate 20mm (Twenty millimetre) nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (onecement : five fine sand : ten graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (one cement : three coarse sand) 12 mm (Twelve millimetre) thick, finished with a floating coat of neat cement complete as per standard design : The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and fixing 100 mm (one hundred millimetre) Dia PVC Cowl for vent Pipe including carriage of material with in all lead and lifts.The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and fixing 455x610mm (four hundred fifty five into six hundred ten millimetre) light duty rectangular C.i. manhole with frame cover weight 38kg (thirty eight kilograms). The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.