Tenderization for ARC Work of Laying testing & commissioning of 11/22 KV UG XLPE CABLE with 11/22 KV Cable End Termination & ST joint Kits (to be Supplies by Agency) along with Erection of HT,LT & TC , Maintenance works under Sachin 2 Sdn and if required any other Sdn under jurisdiction of Sachin Division under ND and if Required Any other Scheme.

Name of Work :- Rate contract for erection of HT/LT line & T/C , UG work for various scheme work for SDN office

under Sachin Division Office.

ITEM CODE Details of Works Qty Unit Amount

HT TAPPING FROM THE EXISTING POLE

INCLUDING FIXING OF CROSS ARMS, CLAMPS

ANTI-CLIMBING DEVICES, DANGER BOARD,

INSULATORS ETC. COMPLETE AND PAINTING

OF FABRICATED MATERIALS AND NUMBERING

COMPLETE WITH COST OF PAINTS AS PER

STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SET AND EARTHING.

ERECTION OF PSC POLES OF 8 *200 KG

INCLUDING EXCAVATION OF PIT AND

REFILLING OF EARTH, FIXING OFCROSS ARMS,

TOP FITTING CLAMPS ANTI-CLIMBING

DEVICES, INSULATORS ETC. COMPLETE AND

PAINTING OF FABRICATED MATERIALS USED

ON THE POLES AND NUMBERING WITH COST

OF PAINT AS PER STANDARD SPECIFICATION

BUT EXCLUDING ERECTION OF GUY SET AND

ERECTION OF STEEL POLES OF 9 TO

METERS INCLUDING EXCAVATION OF PIT AND

REFILLING OF EARTH, FIXING OFCROSS ARMS,

TOP FITTING CLAMPS ANTI-CLIMBING

DEVICES, DANGER BOARD, INSULATORS ETC.

3 9926000003 COMPLETE AND PAINTING OF STEEL POLE, No. 1949

FABRICATED MATERIALS USED ON THE

POLEAND NUMBERING WITH COST OF PAINT

AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SET AND

ERECTION OF STEEL POLE OF 13 METERS FOR

RAILWAY CROSSING ON BG/MG/NG LINE FOR

0.400/11/22KV OVERHEAD LINES I.E INCLUDING

EXCAVATION OF PIT & REFILLING OF EARTH,

FIXING CROSS ARMS, TOP FITTING

CLAMPS,ANTI-CLIMBING DEVICES DANGER

4 9926000004 BOARD, INSULATORS ETC. COMPLETE AND No. 2325

PAINTING OF STEEL POLES, FABRICATED

MATERIALS USED ON THE POLES AND

NUMBERING WITH COSTOF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SETS AND EARTHING.

File No: DGVCLSDUR/MSC/e-file/4523/2026/0057/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTU

Letter No: DGVCLSDUR/0064/01/2026 Approved Date: 08-01-2026

ERECTION OF DOUBLE POLE STRUCTURE OF

METERS 200 KG PSC POLES INCLUDING

EXCAVATION OF PITS & REFILLING OF

EARTHING, FIXING OF CHANNELS,

SUPPORTING ANGLES,CLAMPS, ANTI-

CLIMBING DEVICES DANGER

BOARDS,INSULATORS ETC.COMPLETE AND

PAINTING OF FABRICATED MATERIALS USED

ON THE POLES AND NUMBERING WITH COST

OF PAINT AS PER STANDARD SPECIFICATION

BUT EXCLUDING ERECTION OF GUY SETS AND

EARTHING.(WITHOUT AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURE OF

TO 11 METERS.STEEL POLE INCLUDING

EXCAVATION OF PITS & REFILLING OFEARTH,

FIXING OF CHANNELS, SUPPORTING ANGLES,

CLAMPS,ANTI-CLIMBING DEVICES DANGER

BOARDS, INSULATORS ETC.COMPLETE &

PAINTING OF POLES,FABRICATED

MATERIALSUSED ON THE POLES AND

NUMBERING WITH COST OF PAINTSAS PER

STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SET AND EARTHING.

(WITHOUT AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURE

WITH MOUNTING OF AB SWITCH, HG FUSES OF

8 MTRS 200 KG PSC POLES INCLUDING

EXCAVATION OF PITS AND REFILLING OF

EARTH,FIXING OF CHANNELS SUPPORTING

ANGLES, CLAMPS, ANTI-CLIMBING DEVICES,

7 9926000007 DANGER BOARDS, INSULATORS,DOFUSES No. 3179

ETC. COMPLETE AND PAINTING OF

FABRICATED MATERIALS USED ON THE POLES

AND NUMBERING WITH COSTOF PAINT AS PER

STANDARD SPECIFICATION BUT

EXCLUDINGOF ERECTION OF GUY SET AND

EARTHING.(WITH AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURE

WITH MOUNTING OF AB SWITCH,HG FUSES,

TO 11 METERS STEEL POLES INCLUDING

EXCAVATION OF PITS AND REFILLING OF

EARTH, FIXING OFCHANNEL, SUPPORTING

ANGLES, CLAMPS, ANTI-CLIMBING DEVICES

8 9926000008 DANGER BOARDS, INSULATORS, ETC. No. 4171

COMPLETE AND PAINTING OF POLES

FABRICATED MATERIALS USED ON THE POLES

AND NUMBERING WITH COST OF PAINT AS

PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SET AND

EARTHING.(WITH AB SWITCH)

File No: DGVCLSDUR/MSC/e-file/4523/2026/0057/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTU

Letter No: DGVCLSDUR/0064/01/2026 Approved Date: 08-01-2026

ERECTION OF DOUBLE POLE STRUCTURES

WITH MOUNTING OFAB SWITCH, HG FUSES,

TRANSFORMERS, LIGHTENING ARRESTORS,

DISTRIBUTION BOX. OF 8 METERS 200 KG PSC

POLES INCLUDING EXCAVATION OF PITS AND

REFILLING OF EARTH, CARTING OF

TRANSFORMERS FROMSTORES TO SITE,

FIXING OF CHANNELS, SUPPORTING

9 9926000009 ANGLES,BRACINGS CROSS ARMS CLAMPS, No. 9074

ANTICLIMBING DEVICES DANGER BOARDS,

CONDUCTOR AND CABLE WIRING

ETC.COMPLETE AND PAINTING OF

FABRICATED MATERIALS USEDON THE POLES

AND NUMBERING WITH COST OF PAINT AS

PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SETS AND

ERECTION OF DOUBLE POLE STRUCTURE

WITH MOUNTING OF AB SWITCH,HG FUSES

TRANSFORMERS, LIGHTENING ARRESTORS,

DISTRIBUTION BOX 9 TO 11 METERS STEEL

POLES INCLUDING EXCAVATION OF PITS &

REFILLING OF EARTH CARTING OF

TRANSFORMERS FROM STORE TO SITE,

FIXINGOF CHANNELS SUPPORTING ANGLES,

BRACING, CROSS ARMS,CLAMPS,

ANTICLIMBING DEVICES, DANGER

BOARDS,CONDUCTOR AND CABLE WIRING

ETC. COMPLETE AND PAINTING OF POLES

FABRICATED MATERIALS USED ON THE POLES

AND NUMBERING AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTIONS

OF GUY SETS AND EARTHING.

ERECTION OF GUY SET INCLUDING

EXCAVATION OF PITS & REFILLING OF EARTH

AS PER STANDARD SPECIFICATION WITH STAY

11 9926000011 CLAMPS, STAY WIRE, ANCHOR ROD, TURN No. 561

BUCKLE, EYEBOLT, GUY INSULATOR, CEMENT

CONCRETE BLOCK ETC. BUT EXCLUDING

CONCRETING OF POLES, GUYS, ETC.

INCLUDING COST OF CEMENT SAND METAL

(1:2:4) AND WATER ETC. AS PER STANDARD

ERECTION OF COIL TYPE EARTHING

INCLUDING COST OF COAL,SALT ETC. BUT

WITHOUT COST OF GI WIRE AS PER

STANDARD SPECIFICATION(20kg solt+20kg coal)

ERECTION OF GI PIPE/CI PLATE TYPE

EARTHING INCLUDINGCOST OF COAL SALT

14 9926000014 ETC. BUT WITHOUT COST OF PIPE/GIPLATE GI No. 781

WIRE AS PER STANDARD SPECIFICATION.(20kg

solt+20kg coal)

ERECTION OF STREET LIGHT FIXTURE

COMPLETE WITH CLAMPS, BRASS NIPPLE,

BRASS HOLDER TECK WOOD

BUSH,REFLECTORS FUSE, WIRING ETC. AS

PER STANDARD SPECIFICATION BUT

EXCLUDING COST OF MATERIALS.

STRINGING OF ALL TYPE OF CONDUCTOR

(EXCEPT DOG CONDUCTOR) FOR 11/22KV & LT ONE COND

LINES INCLUDING FIXING OF INSULATORS, PER KM

BINDING JUMPERING ETC.

File No: DGVCLSDUR/MSC/e-file/4523/2026/0057/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTU

Letter No: DGVCLSDUR/0064/01/2026 Approved Date: 08-01-2026

STRINGING OF GI WIRE 8 SWG INCLUDING

BINDING JUMPERING ETC.

PROVIDING SINGLE PHASE SERVICE

CONNECTION WITH PVC 4MM TWIN CORE

CABLE FROM TERMINAL POLE TO METERING

18 9926000018 POINT INCLUDING FIXING OF METER WITH No. 397

METER EARTHING COMPLETE WORK AS PER

STANDARD SPECIFICATION BUT EXCLUDING

COST OF MATERIALS.

PROVIDING THREE PHASE 4 WIRE SERVICE

CONNECTION WITH PVC 4MM2/10MM2 FOUR

CORE CABLE FROM TERMINAL POLE TO

19 9926000019 METERING POINT INCLUDING FIXING OF No. 546

METER WITH METER EARTHING COMPLETE

WORK AS PER STANDARD SPECIFICATION BUT

EXCLUDING COST OF MATERIALS.

ADDITIONAL COST FOR EXCAVATION OF PIT IN

HARD ROCK AREA FOR ERECTION OF POLE/

GUY ETC. AS PER STANDARD SPECIFICATION

OVER & ABOVE NORMAL COST COVERED

AGAINST EXCAVATION OF PIT UNDER NORMAL

SOIL FOR ERECTION OF POLE,GUY, DOUBLE

POLE STRUCTURE EARTHING WITH THE

APPROVAL OF SUPDT.ENGINEER.

PROVIDING GUARDING TO HT LINE ON ROAD/

PROVIDING GUARDING OF LT LINES ON

ROAD/RAIL CROSSING.

23 9926000023 LT LINE TAPPING- SINGLE PHASE No. 51

24 9926000024 LT LINE TAPPING- THREE PHASE No. 93

LAYING OF OVER HEAD LT CABLE FOR ROAD

25 9926000025 CROSSING,HT LINE CROSSING AND No. 263

TELEPHONE LINE CROSSING ETC.(PER SPAN)

ERECTION OF SINGLE POLE STRUCTURES

WITH , HG FUSES,TRANSFORMERS,

LIGHTENING ARRESTOR, DISTRIBUTION BOX.

ON 8 METERS 200 KGAND PSC POLE

INCLUDING EXCAVATION OF PITS AND

REFILLING OF EARTH, CARTING OF

TRANSFORMERS FROM STORES TO SITE,

FIXING OF CHANNELS, SUPPORTING

26 9926000026 ANGLES,BRACINGS CROSS ARMS CLAMPS, No. 4537

ANTICLIMBING DEVICES DANGER BOARDS,

CONDUCTOR AND CABLE WIRING

ETC.COMPLETE AND PAINTING OF

FABRICATED MATERIALS USED ON THE POLE

AND NUMBERING WITH COST OF PAINT AS

PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OFGUY SETS AND

File No: DGVCLSDUR/MSC/e-file/4523/2026/0057/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTU

Letter No: DGVCLSDUR/0064/01/2026 Approved Date: 08-01-2026

ERECTION OF SINGLE POLE STRUCTURES

WITH , HG FUSES,TRANSFORMERS,

LIGHTENINGARRESTOR, DISTRIBUTION BOX.

ON 9 to 11 METERS RSJ POLE INCLUDING

EXCAVATION OF PITS AND REFILLING OF

EARTH, CARTING OF TRANSFORMERS FROM

STORES TO SITE, FIXING OF CHANNELS,

SUPPORTING ANGLES,BRACINGS CROSS

ARMS CLAMPS, ANTICLIMBING DEVICES

DANGER BOARDS, CONDUCTOR AND CABLE

WIRING ETC.COMPLETE AND PAINTING OF

FABRICATED MATERIALS USED ON THE POLE

AND NUMBERING WITH COST OF PAINT AS

PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OFGUY SETS AND

ERECTION OF PSC POLES OF 10 *270 KG

INCLUDING EXCAVATION OF PIT AND

REFILLING OF EARTH, FIXING OF CROSS

ARMS, TOP FITTING CLAMPS ANTI-CLIMBING

DEVICES, INSULATORS ETC. COMPLETE AND

PAINTING OF FABRICATED MATERIALS USED

ON THE POLES AND NUMBERING WITH COST

OF PAINT AS PER STANDARD SPECIFICATION

BUT EXCLUDING ERECTION OF GUY SET AND

ERECTION OF DOUBLE POLE STRUCTURE OF

10 METERS 270 KG PSC POLES INCLUDING

EXCAVATION OF PITS & REFILLING OF

EARTHING, FIXING OF CHANNELS,

SUPPORTING ANGLES,CLAMPS, ANTI-

CLIMBING DEVICES DANGER

BOARDS,INSULATORS ETC.COMPLETE AND

PAINTING OF FABRICATED MATERIALS USED

ON THE POLES AND NUMBERING WITH COST

OF PAINT AS PER STANDARD SPECIFICATION

BUT EXCLUDING ERECTION OF GUY SETS AND

EARTHING.(WITHOUT AB SWITCH)

STRINGING OF 100MM2 ACSR/100MM2 AAAC

30 9926000030 CONDUCTOR FOR LT LINES INCLUDING FIXING 4861

OFINSULATORS, BINDING JUMPERING ETC.

STRINGING OF DOG CONDUCTOR FOR 11/22KV

31 9926000031 HT LINES INCLUDING FIXING OF INSULATORS, 4378

BINDING JUMPERING ETC.

ERECTION OF DOUBLE POLE STRUCTURES

WITH MOUNTING OF AB SWITCH, HG FUSES,

TRANSFORMERS, LIGHTENING ARRESTORS,

DISTRIBUTION BOX. OF 10 METERS 270 KGAND

PSC POLES INCLUDING EXCAVATION OF PITS

AND REFILLING OF EARTH, CARTING OF

TRANSFORMERS FROMSTORES TO SITE,

FIXING OF CHANNELS, SUPPORTING

32 9926000032 ANGLES,BRACINGS CROSS ARMS CLAMPS, No. 10662

ANTI-CLIMBING DEVICES,DANGER BOARDS,

CONDUCTOR AND CABLE WIRING

ETC.COMPLETE AND PAINTING OF

FABRICATED MATERIALS USED ON THE POLES

AND NUMBERING WITH COST OF PAINT AS

PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SETS AND

File No: DGVCLSDUR/MSC/e-file/4523/2026/0057/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTU

Letter No: DGVCLSDUR/0064/01/2026 Approved Date: 08-01-2026

DISMENTALLING OF 8 MTR PSC POLE WITH

CREDITING OF FABRICATION AT STORE &

STACKING OF POLE SAFELY ON ROAD SIDE

OR CREDITING TO DEPARTMENTAL STORE

DISMENTALLING OF 10 MTR PSC POLE WITH

CREDITING OF FABRICATION AT STORE &

STACKING OF POLE SAFELY ON ROAD SIDE

OR CREDITING TO DEPARTMENTAL STORE

DISMENTALLING OF TRANSFORMER CENTRE

(8 MTR PSC POLE) (WITH TRANSFORMER)

WITH CREDITING OF FABRICATION &

TRANSFORMER AT STORE & STACKING OF

POLE SAFELY ON ROAD SIDE OR CREDITING

TO DEPARTMENTAL STORE

DISMENTALLING OF TRANSFORMER CENTRE

(8 MTR PSC POLE) (WITHOUT TRANSFORMER)

36 9926000036 WITH CREDITING OF FABRICATION AT STORE No. 2701

& STACKING OF POLE SAFELY ON ROAD SIDE

OR CREDITING TO DEPARTMENTAL STORE

STRINGING OF LT ABC OF 1*35 SQ MM + 1*25

SQ MM INCLUDING FITTING OF ALL

ACESSARIES I.E. SPECIAL DESIGN

SUSPENSION / TENSION CLAMP, FIXING OF

CROSS ARM, LT SHACKLE INSULATOR ETC.

37 9926000037 FOR FIXING OF MESSENGER WIRE AND TO KM 7046

PROVIDE SERVICE CONNECTION ON AERIAL

BUNCH CABLE BY INSULATED PIERCEING

CONNECTORS THROUGH SERVICE

CONNECTION BOX COMPLETE AS REQUIRED &

DIRECTED BY ENGINEER IN CHARGE.

STRINGING OF LT ABC OF 3*50 SQ MM +1*25

SQ MM+1*35 SQ MM INCLUDING FITTING OF

ALL ACESSARIES I.E. SPECIAL DESIGN

SUSPENSION / TENSION CLAMP, FIXING OF

CROSS ARM, LT SHACKLE INSULATOR ETC.

FOR FIXING OF MESSENGER WIRE AND TO

PROVIDE SERVICE CONNECTION ON AERIAL

BUNCH CABLE BY INSULATED PIERCEING

CONNECTORS THROUGH SERVICE

CONNECTION BOX COMPLETE AS REQUIRED &

DIRECTED BY ENGINEER IN CHARGE.

STRINGING OF 11KV ABC OF 3*95 SQ MM +80

SQ MM INCLUDING FITTING OF ALL

ACESSARIES I.E. SPECIAL DESIGN

SUSPENSION / TENSION CLAMP, FIXING OF

CROSS ARM, BINDING TO PIN

INSULATOR,PREPARING SHACKLE

POINT,JUMPERS ETC. AS REQUIRED &

DIRECTED BY ENGINEER IN CHARGE

STRINGING OF 22 KV ABC OF 3*70 SQ MM +95

SQ MM INCLUDING FITTING OF ALL

ACESSARIES I.E. SPECIAL DESIGN

SUSPENSION / TENSION CLAMP, FIXING OF

CROSS ARM, BINDING TO PIN

INSULATOR,PREPARING SHACKLE

POINT,JUMPERS ETC. AS REQUIRED AND

DIRECTED BY ENGINEER IN CHARGE

File No: DGVCLSDUR/MSC/e-file/4523/2026/0057/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTU

Letter No: DGVCLSDUR/0064/01/2026 Approved Date: 08-01-2026

STRINGING OF LT ABC OF 2*50 SQ MM +1*25

SQ MM+ 35 SQ MM INCLUDING FITTING OF ALL

ACESSARIES I.E. SPECIAL DESIGN

SUSPENSION / TENSION CLAMP, FIXING OF

CROSS ARM, LT SHACKLE INSULATOR ETC.

41 9926000041 FOR FIXING OF MESSENGER WIRE AND TO KM 9863

PROVIDE SERVICE CONNECTION ON AERIAL

BUNCH CABLE BY INSULATED PIERCEING

CONNECTORS THROUGH SERVICE

CONNECTION BOX COMPLETE AS REQUIRED &

DIRECTED BY ENGINEER IN CHARGE.

DISMENTALING OF RSJ (9/11 METER) POLE

AND CREDITING THE OLD MATERIAL TO STORE

DISMENTALING OF TRANSFORMER CENTER

ON 10MTR,270KG PSC POLE(WITHOUT

TRANSFORMER) WITH CREDITING OF

FABRICATION AT STORE AND STACKING OF

POLE SAFELY ON ROAD SIDE OR CREDITING

TO DEPARTMENTAL STORE

DISMENTALING OF TRANSFORMER CENTER

ON 10MTR,270KG PSC POLE(WITH

TRANSFORMER) WITH CREDITING OF

FABRICATION AT STORE AND STACKING OF

POLE SAFELY ON ROAD SIDE OR CREDITING

TO DEPARTMENTAL STORE

DISMENTLING OF 11KV ABC OF 3*95 SQ MM

+80 SQ MM AND CREDITING FITTING OF ALL

ACESSARIES AND FABRICATION TO

DEPARTMENTAL STORE

DISMENTLING OF 22 KV ABC OF 3*70 SQ MM

+95 SQ MM AND CREDITING FITTING OF ALL

ACESSARIES AND FABRICATION TO

DEPARTMENTAL STORE

DISMENTALING OF LT ABC OF 1*35 SQ MM +

1*25 SQ MM AND CREDITING FITTING OF ALL

ACESSARIES TO DEPARTMENTAL STORE.

DISMENTALING OF LT ABC OF 3*50 SQ MM

48 9926000048 +1*25 SQ MM+1*35 SQ MM AND CREDITING KM 6166

FITTING OF ALL ACESSARIES TO

DEPARTMENTAL STORE.

DISMENTALING OF LT ABC OF 2*50 SQ MM

49 9926000049 +1*25 SQ MM+ 35 SQ MM AND CREDITING KM 4930

FITTING OF ALL ACESSARIES TO

DEPARTMENTAL STORE.

RESTRINGING OF ALL TYPE OF CONDUCTOR

(EXCEPT DOG CONDUCTOR) FOR 11/22KV & LT ONE COND

LINES INCLUDING FIXING OF INSULATORS, PER KM

BINDING JUMPERING ETC.

RESTRINGING OF DOG CONDUCTOR FOR

51 9926000051 11/22KV HT LINES INCLUDING , BINDING 3129

LABOUR CHARGE FOR THE INSTALLATION OF

52 9926000052 NEW DTR METER. (METER WILL BE PROVIDED No. 355

File No: DGVCLSDUR/MSC/e-file/4523/2026/0057/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTU

Letter No: DGVCLSDUR/0064/01/2026 Approved Date: 08-01-2026

LABOUR CHARGE FOR THE REPLACEMENT OF

DTR METER AND OLD METER SHOULD BE

CREDITED TO SDN STORE. (METER WILL BE

PROVIDED BY DGVCL)

LABOUR CHARGE FOR PROVIDING CT COIL

54 9926000054 FOR DTR METER CONNECTION. (CT COIL WILL PER CT 85

BE PROVIDED BY DGVCL)

LABOUR CHARGE FOR REPLACEMENT OF CT

COIL FOR DTR METER CONNECTION AND OLD

CT SHOULD BE CREDITED TO SDN STORE. (CT

COIL WILL BE PROVIDED BY DGVCL)

LABOUR CHARGE FOR FIXING OF MMB FOR

56 9926000056 DTR METER (MMB WILL BE PROVIDED BY No. 128

LABOUR CHARGE FOR REPLACEMENT OF DTR

57 9926000057 METER BOX. (METER WILL BE PROVIDED BY No. 1820

PROVIDING / REPLACEMENT OF 1.5 SQ MM

58 9926000058 CORE COPPER CABLE 3.5 METER (CABLE TO No. 1840

BE PROVIDED BY AGENCY)

LABOUR CHARGE FOR

PROVIDING/RECONNECTION OF TERMINAL PER

CONNECTION WITH PROPER SIZE OF LUGS. TERMINATION

(LUGS COST IS BORNE BY AGENCY)

LABOUR CHARGE FOR THE SPOT READING OF

DTR METER WITH DETAIL SURVEY OF DEFECT

IF ANY. A DULY SIGN COPY BY SURVEYOR

PERSON OF AGENCY IN PRO-FORMA REPORT

60 9926000060 SHOULD BE SUBMITTED TO SDN OFFICE.(* PER DTR 60

ONLY IF ALL PARAMETER OF VOLTAGE,

CURRENT & LOAD AS SHOWN IN PER-FORMA

IS FILLED) AS PER THE INSTRUCTION OF

ENGINEER IN-CHARGE.

LABOUR CHARGE FOR THE SPOT READING OF

DTR METER WITH DETAIL SURVEY OF DEFECT

IF ANY. A DULY SIGN COPY BY SURVEYOR

PERSON OF AGENCY IN PRO-FORMA REPORT

SHOULD BE SUBMITTED TO SDN OFFICE.

(DULY FILL PER-FORMA IN FAULT CONDITION

IN WHICH READING PARAMETER IS NOT

SHOWN IN METER)

INSTALLATION OF DTR METER INCLUDING

METER BOX, PROVIDING & FIXING OF 1.5SQ

MM SINGLE STRAND 10 CORE ARMOURED

COPPER CABLE (3.5METER), TERMINATION IN

METER & COIL ETC.(METER, METER BOX,

C.T./P.T. COIL WILL BE PROVIDED BY DGVCL)

INSTALLATION OF DTR METER INCLUDING

METER BOX, TERMINATION IN METER & COIL

63 9926000063 ETC. (WITHOUT 10CORE COPPER CABLE) No. 886

(METER, METER BOX, C.T./P.T. COIL WILL BE

PROVIDED BY DGVCL)

Binding of messanger Conductorat with a distance

not more than 0.75 mtr with 6 turns minimum on

XLPE Cable with single strand binding wire

(including cost of binding wire)

Supply and Installation of 11/22 kV Distribution

Transformers HT Terminal protector (UV

Resistance) with using 95/120/150 sq.mm long

barrel aluminum lug. (1Set = 3 Nos i.e. on R, Y, B)

File No: DGVCLSDUR/MSC/e-file/4523/2026/0057/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTU

Letter No: DGVCLSDUR/0064/01/2026 Approved Date: 08-01-2026

Supply & Installation of HT EPR Tap on 11/22 kV

Distribution Transformer with replacement of bare

conductor by HT ABC conductor (DO bottom side to

transformer) after removal of semi conductor by HT

ABC (6 inch both side). HT ABC to be supplied by

DGVCL. (1Set = 3 Nos i.e. on R, Y, B)

Supply, Installation, Testing and Commissioning of

Maintenance Free, Ready Capsule, Pipe-In-Cage

(Pic) Type, Earth Electrodes for HT Feeder Pole

Having 2000 mm Electrode Length as per the

Tender Specifications and Drawing. (All Materials

Will Be Supplied By Agency)

Supply, Installation, Testing and Commissioning of

Maintenance Free, Ready Capsule, Pipe-In-Cage

(Pic) Type, Earth Electrodes for HT Feeder Pole

Having 3000 mm Electrode Length as per the

Tender Specifications And Drawing. (All Materials

Will Be Supplied By Agency)

Supply and Installation of 25 X 3 mm GI Strip having

hot dip- galvanized-zinc coating of 80-100 microns

without any joints or welding. Both the end of the GI

strip should be connected with GI nut bolts and

required fabrication work for giving separate

69 9926000090 earthing connections to(1) Neutral of the Meter

transformer(2) MS structures of the transformer

center (Approximately 25 meter GI strip per

transformer centre- as per requirement and

instruction of Engineer in- charge) (All Materials will

be supplied by Agency)

Supply and Installation of uPVC standard make

Pipe of 1.25" diameter for covering GI strip with UV

protected Cable Ties of 550 X 7.6 mm size to bind

with pole face(Approximately 25 meter uPVC pipe

for GI strip covering per transformer centre -as per

requirement and instruction of Engineer in-charge.

Supply & fixing of upto 33 kV Conducotr sleev for

Busbar to Drop out Fuse and Drop out fuse to

71 9926000093 Transformer H.T. including Busbar (12 mm sleev) Meter

as per technical specification. (All Materials will be

supplied by Agency)

Supply & fixing of upto 33 kV Conducotr sleev for

Busbar to Drop out Fuse and Drop out fuse to

72 9926000094 Transformer H.T. including Busbar(15 mm sleev) as Meter

per technical specification. (All Materials will be

supplied by Agency)

Supply & fixing of Disc type Red Color FRP(Non-

flammable) material with Weather resistant, Non-

73 9926000095 conductive bird guard OD=300 MM, ID=33 MM, No

Width =1.25 MM, one side cut from ID to OD. (All

Materials will be supplied by Agency)

Providing and fixing of LT Terminal protectors i.e.

Re-useable boot (LT Side 1.1 kV) including LT (1.1

kV) insulating taps. All live part at LT side shall be

covered with fixing of LT insulating taps.

75 Nylon Net around Transformer Center

75.1 9926000097 Nylon Net (12 * 15 ft) Per Net

75.2 9926000098 Nylon Dori Per TC

Labour charge for fitting Nylon Net (All fabricated

75.3 9926000099 material for fitting nylon net shall be provided by Per TC

TOTAL ESTIMATED AMOUNT OF SCHEDULE B1

File No: DGVCLSDUR/MSC/e-file/4523/2026/0057/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTU

Letter No: DGVCLSDUR/0064/01/2026 Approved Date: 08-01-2026

1 9924000001 Cutting of Tree branches surounding HT/LT line Per Tree 57

Replacement of old jumpers & providing new double

2 9924000002 jumpers with 8" binding & capsuling with PVC pipe No. 90

3 9924000005 Support pole for Stay PSC/STP/RSJ No. 633

4 9924000006 Pin binding of conductor 11/22kv Pin insulator No. 18

Pin binding of conductor 11/22kv Pin insulator per

pole in costle area with cleaning .

6 9924000008 Pin binding of conductor LT shakel insulator No. 14

Replacement of one/both disc.insulator at strain

8 9924000010 Replacement of LT shackle insulator at cut point No. 31

9 9924000011 Refixing of V cross Arm No. 61

10 9924000012 Replacement of V cross Arm No. 210

11 9924000013 Refixing of Top fitting in proper position No. 41

12 9924000014 Replacement of Top fitting No. 51

13 9924000015 Replacement of LT cross Arm No. 105

Providing DO fuse on DP with carting &

jumpuring(ONE DO FUSE)

Numburing of pole with paint by preparing back

15 9924000017 ground of one colour and have lettering(height 3" * No. 46

width 0.5") using stensil

16 9924000018 Fixing of MMB(1PH.) at consumer end No. 86

17 9924000019 Fixing of MMB(3PH.) at consumer end No. 128

18 9924000020 Replacement of (1ph.) meter for Urban area No. 51

19 9924000021 Replacement of (1ph.) meter for Rural area No. 74

painting consumer no. on MMB (Urban) (with letter

size height 40mm* width 8mm)

painting consumer no. on MMB (Rural) (with letter

size height 40mm* width 8mm)

Replacement of deteriorated Single phase Service

Fixing of new dist. Box with complete wiring

including clamps,nut bolts etc.

Reparing of guarding involving reshaping of bearer

wire cross lacing binding etc.

Painting of steel fabricated material of RSJ DO DP

structure with paint

Painting of steel fabricated material of RSJ pole

26 9924000028 mounted transformer double pole structure with No. 3748

Painting of steel fabricated material of RSJ single

pole with paint

painting of steel fabricated material of PSC Single

pole (HT line) with paint

painting of steel fabricated material of PSC DO DP

double pole with paint

painting of steel fabricated material of PSC double

pole at pole mounted transformer with paint

31 9924000033 Providing line seperater single phase No. 11

File No: DGVCLSDUR/MSC/e-file/4523/2026/0057/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTU

Letter No: DGVCLSDUR/0064/01/2026 Approved Date: 08-01-2026

32 9924000034 Providing line seperater three phase No. 31

Replacement / Providing of stay insulator along with

adjustment of tension in stay wire

Replacement of deteriorated /providing LT dist. Box

34 9924000036 with new up to 100KVA capacity & crediting it to No. 1061

Replacement of deteriorated /providing LT dist. Box

35 9924000037 with new above 100KVA capacity & crediting it to No. 2084

36 9924000038 Adjustment of tension in stay wire No. 158

37 9924000039 Refitting of LA No. 31

Converting pin point to Shackle point including

dismentaling & restringing etc.

replacement of 11KV Pin insulator with providing

new double pin binding

replacement of 22KV Pin insulator by new 11kv pin

40 9924000042 insulator with spares & providing new double pin No. 81

Providing 11kv double disc insulators with binding &

Replacement of existing 11kv conductor (all size)

with new double pin binding

43 9924000046 Plumbing of PSC Pole with straightening at pin point No. 287

Plumbing of PSC Pole with straightening at tension

Plumbing of tilted DP structure (PSC/RSJ/STP) with

refilling of stone Murrum etc.

Providing new 11kv AB /GO switch with fabrication

and insulated colour code jumper, binding, lugs etc

Replacement of old 11kv AB /GO switch with

providing new insulated jumper, binding, lugs etc

Providing cage type loop guard in verticle LT line

with using PVC reel insulators etc

Labour charges for replacement /providing of MMB

49 9924000053 & service with all accessories for three phase No. 644

Labour charges for replacement /providing of MMB

50 9924000054 & service with all accessories for single phase No. 554

Dismentalling of existing Dist.X'mer center(RSJ

51 9924000055 /STP POLE) 25/63/100/200 KVA with all fabrication No. 5528

& creditig the old material to store

52 9924000056 Disconnection from LT pole 1 phase No. 46

Reconnection from LT pole 1 phase

( payment after receipt of R/C charges)

54 9924000058 Disconnection from LT pole 3 phase No. 66

Reconnection from LT pole 3 phase

( payment after receipt of R/C charges)

Dismentaling & removing of service line from pole &

crediting to S/dn (1 ph.)

Dismentaling & removing of service line from pole &

crediting to S/dn (3 ph.)

File No: DGVCLSDUR/MSC/e-file/4523/2026/0057/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTU

Letter No: DGVCLSDUR/0064/01/2026 Approved Date: 08-01-2026

Reconnection of service line complete with PVC

Reconnection of service line complete with PVC

Providing spiral type earthing by G.I. NO 8(weight

2kg -5mtr in length) with salt and coal 10kg each,

including pvc rigid pipe 20mm dia( 1.5mtr length) to

pass exposed part of G.I. wire at consumer end with

all materials, earth resistance should be less than

Providing and fixing of signle core 1.5 sq mm single

strand copper insulated cable with cable nail clip for

spiral type earthing at consumer end. The end of

G.I. no 8 is to be connected by connector with

61 9924000070 copper cable of which other end shall be connected per meter 30

to the earth terminal of meter box. This item shall be

used in location where there is more distance

between earth terminal and earthing terminal of

meter. (All materials supplied by contractor)

Stringing of LT ABC of 1*35 SQ MM + 1*25 SQ MM

including fitting of all acessaries i.e. special design

suspension / tension clamp, fixing of cross arm, LT

shackle insulator etc. for fixing of messenger wire

and inclusive of dismantling charge of existing bare

conductor and crediting in to store & dismentaling of

service line from LT bare conductor and to provide

service connection on Aerial Bunch Cable by

insulated pierceing connectors through service

connection box complete as required & directed by

Engineer in Charge.

Stringing of LT ABC of 3*50 SQ MM +1*25 SQ

MM+1*35 SQ MM including fitting of all acessaries

i.e. special design suspension / tension clamp,

fixing of cross arm, LT shackle insulator etc. for

fixing of messenger wire and inclusive of

dismantling charge of existing bare conductor and

crediting in to store & dismentaling of service line

from LT bare conductor and to provide service

connection on Aerial Bunch Cable by insulated

pierceing connectors through service connection

box complete as required & directed by Engineer in

Stringing of 11KV ABC of 3*95 SQ MM +80 SQ MM

including fitting of all acessaries i.e. special design

suspension / tension clamp, fixing of cross arm,

binding to pin insulator,preparing shackle

point,jumpers etc. and inclusive of dismantling

charge of existing bare conductor and crediting in to

store complete as required & directed by Engineer

Stringing of 22 KV ABC OF 3*70 SQ MM +95 SQ

MM including fitting of all acessaries i.e. special

design suspension / tension clamp, fixing of cross

arm, binding to pin insulator,preparing shackle

point,jumpers etc. and inclusive of dismantling

charge of existing bare conductor and crediting in to

store complete as required & directed by Engineer

File No: DGVCLSDUR/MSC/e-file/4523/2026/0057/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTU

Letter No: DGVCLSDUR/0064/01/2026 Approved Date: 08-01-2026

Stringing of LT ABC of 2*50 SQ MM +1*25 SQ MM+

35 SQ MM including fitting of all acessaries i.e.

special design suspension / tension clamp, fixing of

cross arm, LT shackle insulator etc. for fixing of

messenger wire and inclusive of dismantling charge

66 9924000069 of existing bare conductor and crediting in to store & KM 15613

dismentaling of service line from LT bare conductor

and to provide service connection on Aerial Bunch

Cable by insulated pierceing connectors through

service connection box complete as required &

directed by Engineer in Charge.

TOTAL ESTIMATED AMOUNT OF SCHEDULE B2

Labour charge for excavation of cable trench of

400mm width x 1200mm depth, in any type of soil

for laying of cable of size up to 240 mm2 (For

1 9925000001 additional cable 200 mm additional width shall be Meter 72

considered i.e. half trench length is to be

Labour charge for excavation of cable trench of

600mm width x 1200mm depth, in any type of soil

for laying of cable of size up to 240 mm2 (For

additional cable 200 mm additional width shall be

considered i.e. half trench length is to be

Labour charge for excavation of cable trench of

400mm width x 1500mm depth, in any type of soil

for laying of cable of size up to 240 mm2 (For

additional cable 200 mm additional width shall be

considered i.e. half trench length is to be

Labour charge for laying of 11kV / 22 kV XLPE

Cable of size up to 240 mm2 & preparation of sand

layer 100mm thick, in the cable trench & covering

the cable with 150 mm dia (Inner), thickness

mm, 1.0 meter long RCC half round muffs and

providing and fixing of 4inch width yellow colour

4 9925000004 polyethylene tape with printing "CAUTION Meter 171

ELECTRIC CABLE BELOW" at 0.75 m depth from

ground surface after laying cable in trench. This will

provide indication that electric cable is passing

underground so as to protect cable from mechnical

injuries, refilling the same, as per Instruction of

Engineer in Charge (EIC).

Labour charge for horizontal drilling using Auger

machine without damage to surface road at max

mtrs depth & putting of 6.11 kg/cm2 , class-4,Green

color, 110mm O.D. , 8.5mm thickness H.D.P.E. pipe

confirms to IS 4984-1987(3rd revision) and BIS

certification and laying of 11KV/22KV XLPE cable of

size up to 240 mm2 in HDPE pipe, as per Site

Condition (excluding cost of pipe). The detail map

obtained from HDD machine and excell sheet(hard

and soft copy) indicating the respective depth and

distance from adjacent landmark for each segment

for HDD is must required to be submitted. HDD to

be carried out at depth 1.5 mtrs to 2.0 mtrs as per

site conditions and as per instruction of EIC.

File No: DGVCLSDUR/MSC/e-file/4523/2026/0057/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTU

Letter No: DGVCLSDUR/0064/01/2026 Approved Date: 08-01-2026

Labour charge for horizontal drilling manually

without damage to surface road at max 2.0 mtrs

depth & putting of 6.11 kg/cm2 , class-4,Green

color, 110mm O.D. , 8.5mm thickness H.D.P.E. pipe

confirms to IS 4984-1987(3rd revision) and BIS

certification and laying of 11KV/22KV XLPE cable of

6 9925000006 size up to 240 mm2 size, as per Site Condition Meter 615

(excluding cost of pipe). The detail map and excell

sheet(hard and soft copy) indicating the respective

depth and distance from adjacent landmark for each

segment of cable to be submitted. Drilling to be

carried out at depth Minimum 1.2 mtrs to 2.0 mtrs

as per site conditions as per instruction of EIC.

Supply of 6.11kg/cm2 , class-4,Green color, 110mm

O.D. , 8.5 mm thickness H.D.P.E. pipe confirms to

7 9925000007 IS 4984 and BIS certification for laying of Meter 430

underground 11KV / 22KV XLPE cable up to

Labour work for RCC concreting on disputed

location and repairing of damage portion of road

8 9925000008 crossing for the work carried out for roads crossing CMT 3189

as well as concreting & muffing of ploes including all

materials (1:2:4)

Providing & fixing concrete stone route marker of

300 mm width x 150 mm thick x 650 mm height

embedded in earth at least 300 mm below &

mm above ground level respectively at distance

approx 50 meters along the length of cable. The

RCC concreting (1:2:4)(all necessary maeterials will

be in bidder's scope) of route marker is to be carried

out 300 mm width x 150 mm thick x 300 mm below

ground level as per instruction of EIC. The route

marker should be with name of company with

approved yellow colour-DGVCL. The distance from

marker to cable and cable depth with feeder name

etc., marked with arrow sign is to be painted on

it.The route marker is to be fixed at location near to

any fixed permanent location (not necessary to fix

exact on top of cable) as per instruction of EIC.

Erection of D.P. (double pole) structure using 9 /

Mtr. RSJ pole with cable connection arrangement

along with fitting of necessary fabrication for 11KV

cable including excavation of pit & refilling of earth

as per instruction of EIC. (Exclusive of concreting &

muffing of poles)

Erection of Single pole structure using 9 / 11 Mtr

RSJ pole with cable connection arrangement along

with fitting ofnecessary fabrication for 11KV/22 KV

cable including excavation of pit & refilling of earth

as per instruction of EIC. (Exclusive of concreting &

muffing of poles)

Erection of D.P. (double pole) structure using

Mtr. PSC pole with cable connection arrangement

along with fitting of necessary fabrication for 11KV

cable including excavation of pit & refilling of earth

as per instruction of EIC. (Exclusive of concreting &

muffing of poles)

Erection of Single pole structure using 8.0 Mtr PSC

pole with cable connection arrangement along with

fitting ofnecessary fabrication for 11KV/22 KV cable

including excavation of pit & refilling of earth as per

instruction of EIC. (Exclusive of concreting &

muffing of poles)

File No: DGVCLSDUR/MSC/e-file/4523/2026/0057/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTU

Letter No: DGVCLSDUR/0064/01/2026 Approved Date: 08-01-2026

Labour charge for erecting of 11kV / 22 kV XLPE

cable of size up to 240 mm2 on DP Structure with

14 9925000014 fixing of 02 Nos polymer cleats on top and middle per Job 591

part.Polymer cleats, nut bolts etc. fixing material to

be provided by contractor.

Providing & fixing of 6.11kg/cm2 , class-4,Green

color, 110mm O.D. , 8.5mm thickness H.D.P.E. pipe

confirms to IS 4984 and BIS certification on the

erected DP structure for the mechanical protection

of cable by inserting the cable inside HDPE pipe.

15 9925000015 The HDPE pipe shall be erected in such a way that Per Job 1461

300mm shall be below the ground level and the rest

2700 mm shall be supported on the DP Structure

with 01 No Polymer cleat.All materials including

polymer cleat and Nut bolt to be provided by

Providing and fixing of pipe type earthing from

mm dia class-B GI pipe with pit to be filled with salt

& coke and construction of chamber as per DGVCL

16 9925000016 Drg. No. dg /100 for DP and cable. The earthing pit No. 3635

should be joined with cable by G.I. strip of size 1”

width & 2 mm thick. All material GI pipe, Coke, Salt

etc will be supplied by bidder.

Supply & fixing of heat shrink type end

terminations (outdoor) for upto 11kV 3C x

mm2 size XLPE cable as per DGVCL technical

Supply & fixing of heat & shrinkable end

terminations (outdoor) for upto 22 kV 3C x 185 mm2

size XLPE cable as per DGVCL technical

Supply & fixing of heat shrink type end terminations

19 9925000019 (indoor) for upto 11kV 3C x 185 mm2 size XLPE No. 3635

cable as per DGVCL technical specification)

Supply & fixing of heat & shrinkable end

terminations (indoor) for upto 22 kV 3C x 185 mm2

size XLPE cable as per DGVCL technical

Supply & fixing of heat shrinkable straight through

21 9925000021 joint for upto 11kV 3C x 185 mm2 size XLPE No. 6774

cableas per DGVCL technical specification.

Supply & fixing of heat shrinkable straight through

22 9925000022 joint type for upto 22kV 3C x 185 mm2 size XLPE No. 11590

cable as per DGVCL technical specification

Labour charge for excavation of 2100mm long x

1200mm wide x 1200 mm deep joint pits for

installation of 11kV / 22kV Straight through joints as

23 9925000023 per instruction of engineer-in-charge & covering the No. 399

cable with 150 mm dia (Outer), thickness 25 mm,

1.0 meter long RCC half round muffs & refilling

same as per instruction of EIC .

File No: DGVCLSDUR/MSC/e-file/4523/2026/0057/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTU

Letter No: DGVCLSDUR/0064/01/2026 Approved Date: 08-01-2026

Providing and fixing of insulating bus bar, made

from 11KV/22KV XLPE cable after removal of semi

conducting layer and applying of PVC heat

shrinkable anti-tracking core insulating tubing

(1.1KV), on both end terminal using Aluminium long

barrel heavy duty up to 240 sq mm lugs, Aluminium

bus connector. Taping with PG- clamp for bus

conductor as per drawing and as per instruction of

EIC. The Alluminium lugs and PG clamp shall be

covered with 11KV/22KV HT insulating tapes.

(11KV/22KV XLPE cable will be in scope of DGVCL

while all other materials will be in bidder's scope)

Testing of cable at various points and

commissioning the feeder as per instruction of

engineer-in-charge.Test result shall be submitted by

contractor with bill.

Preparation and submission of 6 (six) copies, of

complete layout drawings with GIS mapping as per

actual cable routing showing road crossing, HDPE

pipe sleeving, jointing locations, markers etc.

Providing and fixing of Sign Board at junction point

Made out of 2 mm aluminium sheet size 750x300

mm (2.5 x 1ft) rectangle, as per design, pre treated

with phosphate process and acid etching coated

with one coat of epoxy primer and two coats of best

quality paints, refloctrorised with Hi-Intensity retro –

reflective sheeting as per the latest and frame

27 9925000027 fabricated from suitable size iron angle. The Sign No. 10023

Board is to be fixed on the base prepared from

channel and bracing angles which is grouted by

means of cement concreting of 1:2:4 for size of

mm dia x 800 mm height (500 mm to be grouted in

ground). The details to be displayed on sign board

will be given by In-charge Engineer.

(a) Hi intensity Micro prismatic Grade

Providing and fixing of Sign Board (Danger Board)

on Distribution Transformer Centers

Made out of 2mm aluminium sheet size

300x300mm (1x1ft) as per design, pre treated with

phosphate process and acid etching coated with

one coat of epoxy primer and two coats of best

quality paints, refloctrorised with Hi-Intensity retro-

reflective sheeting as per the latest and frame

fabricated from suitable size iron angle. The Sign

Board (Danger Board is to be fixed at the location

as per instruction of In-charge Engineer.

(a) Hi intensity Micro prismatic Grade

Providing & fixing of aluminium tag of size 250 mm

(L) x 75 mm (W) from 3 mm aluminium sheet along

with 1.0 mm dia aluminium binding wire for fixing of

aluminium tag near end termination joint at DP

structure for identifyng the cable. The details of

feeder i.e. 11 / 22 KV with feeder name shound be

punched on the tag by letter punch of size 16 mm

as per instruction of In-charge Engineer.

Supply & fixing of heat shrink type end terminations

30 9925000030 (outdoor) for 11kV 3C x 240 mm2 size XLPE cable No. 4427

as per DGVCL technical specification

Supply & fixing of heat & shrinkable end

31 9925000031 terminations (outdoor) for 22 kV 3C x 240 mm2 size No. 6231

XLPE cable as per DGVCL technical specification)

File No: DGVCLSDUR/MSC/e-file/4523/2026/0057/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTU

Letter No: DGVCLSDUR/0064/01/2026 Approved Date: 08-01-2026

Supply & fixing of heat shrink type end terminations

32 9925000032 (indoor) for 11kV 3C x 240 mm2 size XLPE cable as No. 4338

per DGVCL technical specification)

Supply & fixing of heat & shrinkable end

33 9925000033 terminations (indoor) for 22 kV 3C x 240 mm2 size No. 6231

XLPE cable as per DGVCL technical specification

Supply & fixing of heat shrinkable straight through

34 9925000034 joint for 11kV 3C x 240 mm2 size XLPE cableas per No. 6829

DGVCL technical specification.

Supply & fixing of heat shrinkable straight through

35 9925000035 joint type for 22kV 3C x 240 mm2 size XLPE cable No. 11590

as per DGVCL technical specification

Installation, Testing and commissioning of

KV,630 A SCADA Compatible, RRL type- 3 Way

36 9925000038 RMU including Two numbers of earthings as per No. 42000

Drawing (material is in bidder's scope) and as per

DGVCL Technical specification.

Installation, Testing and commissioning of

KV,630 A SCADA Compatible, RRLL type- 4 Way

37 9925000039 RMU including Two numbers of earthings as per No. 42000

Drawing (material is in bidder's scope) and as per

DGVCL Technical specification.

Installation, Testing and commissioning of

22KV,630 A SCADA Compatible, RRL type-3 Way,

38 9925000040 RMU including Two numbers of earthings as per No. 53000

Drawing (material is in bidder's scope) and as per

DGVCL Technical specification.

Installation, Testing and commissioning of

22KV,630 A SCADA Compatible, RRLL type-4 Way,

39 9925000041 RMU including Two numbers of earthings as per No. 54500

Drawing (material is in bidder's scope) and as per

DGVCL Technical specification.

Construction of plinth for 11KV, RRL type- 3 Way

(i.e Two numbers of Isolator & One number of

Breaker) Ring Main Unit as per DGVCL's technical

specification mentioned in drawing no: Drg. 11kv-

01. All required material will be supplied by

Construction of plinth for 11KV, RRLL type- 4 Way

(i.e Two numbers of Isolator & Two number of

Breaker)Ring Main Unit as per DGVCL's technical

specification mentioned in drawing no:Drg. 11kv-

02.All required material will be supplied by

Construction of plinth for 22KV, RRL type- 3 Way

(i.e Two numbers of Isolator & One number of

Breaker) Ring Main Unit as per DGVCL's technical

specification mentioned in drawing no: Drg. 22kv-

01. All required material will be supplied by

Construction of plinth for 22KV, RRLL type- 4 Way

(i.e Two numbers of Isolator & Two number of

Breaker)Ring Main Unit as per DGVCL's technical

specification mentioned in drawing no:Drg. 22kv-

02.All required material will be supplied by

File No: DGVCLSDUR/MSC/e-file/4523/2026/0057/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTU

Letter No: DGVCLSDUR/0064/01/2026 Approved Date: 08-01-2026

Modifications e.g.Providing and fixing of Terminal

protectors i.e. Re-use able boot (HT Side 11/22KV,

LT Side 1.1KV) including 11/22 KV insulating taps

and L.T.(1.1 KV) insulating taps ,Busbar, Tapping

from Bus Bar (11/22 KV XLPE cable) through P.G.

Clamp for H.T. Jumper to D.O. Fuse to bushings of

Transformer Center, providing & Fixing of jumper

and providing & fixing of Heat Shrinkable Anti

Tracking Core Insulating Tubing (Insulation Level

44 9925000046 11/22 KV) in H.T. jumper , Clamping arrangement of No. 10152

cable support frame on both side of existing Over

Head type Distribution Transformer to utilize in

Under Ground cable network as per drawing & as

per instruction of Engineer incharge. All live parts

i.e. PG-Clamp, connections of D.O.fuses, HT

bushings etc . shall be covered with fixinng of 11/22

KV HT insulating tapes. ( 11/22 KV XLPE cable will

be in scope of DGVCL while all other materials will

be in bidder's scope ) .

Laying of any size of 11/ 22 KV XLPE /PILC Cable per cable per

in redaymade trench or in open space mtr

Labour charges for Lying of O/H XLPE cable pole to

Supply of 150 mm dia (Inner), thickness 25 mm,

meter long RCC half round pipe

Total of Schedule B1 + B2 + B3 is Rs. TOTAL

1.DGVCL will provide key material like M.S.

materials,ABC/Bare conductors,PSC/RSJ

Poles,Insulators,Fabricated materials etc. to the

2.All fabricated items shall be fabricated as per

DGVCL approved drawing and by welding rods

confirming to the relevent ISI specification and as

directed by Engineer in charge.

3.Necessary electricity connection for fabrication

items shall be provided by DGVCL on payment of

required charge for connection & electricity bill of

the same shall be paid by the agency.

4.All the rates are inclusive of PF & Exclusive of

GST applicable time to time.

5.All steel material are to be painted as below:

(a) Scrubbing of rusted surface properly before

applying the paints on to the RSJ poles & steel

fabricated materials of RSJ/PSC poles is must

(b) Two coats of approved ISI mark red oxide

(primer) is to be properly painted for the RSJ poles

& steel fabricated materials of RSJ/PSC poles.

(c) Two coats of approved ISI mark silver paint (i.e.

triple mangoes or equivalent quality silver paint) is

to be properly painted on to the RSJ poles & steel

fabricated materials of RSJ/PSC poles.

File No: DGVCLSDUR/MSC/e-file/4523/2026/0057/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTU

Letter No: DGVCLSDUR/0064/01/2026 Approved Date: 08-01-2026

1. Excavation, Drilling and Cable laying should be

done with all road safety measures such as hard

barricading, displaying “DANGER” sign and

“DGVCL - Work in Progress” on it with light

reflective strips or paint. Proof of all barricading and

safety equipment need to submit.

2. Cable laying should be done through roller (not

through tractor or pulling by any other vehicles).

3. Ownership document regarding roller/pulling

machine and HDD machine need to submit or

agreement with agency of above narrated machine

regarding work for this tender required to submit.

4. Trail pit excavation and De-excavation should

be done simultaneously so that any chance of road

accident can be prevented.

5. Three no of Polymer cleat should be provided

on rising cable for proper fitting and if it is not

feasible to provide third polymer cleat at the bottom

than two nos of polymer cleat on upper side and

strap strip on bottom end required to install for

proper fitting of rising cable.

6. 100% videography of cable laying along with

landmark location of cable laying required to be

Executive Engineer

Technical done and submit Pen drive to the concern engineer

Terms for their verification.

Sachin Division

7. Aluminum strip required to use to connect end

of cable at cable rising location as per instruction of

Engineer in charge. Also no joints will be allowed in

GI strip for cable Earthing and strip will be

connected through GI bolts only.

8. Issues regarding ROW on field should be

resolved by contractor itself.

9. Testing & measuring equipment: - 5 KV Digital

insulation testers, Digital Earth clamp meter for

measurement of Earthing and leakage current,

Digital Rodometer with NABL accredited agency

valid test certification.

10.Earthing value & Insulation Resistance (IR)

value of all location along with Geo tagged

(longitude & latitude) wise testing and measured

value photograph need to submit with Bill.

11.Depth chart should be provided at every

meter with mentioning landmark.

12. Partial Discharge test to be carried out on

sample part of cable before charging as decided by

in charge engineer.

13. Qualified cable jointer with Minimum five years

of experience required with necessary certification

regarding qualification and specific experience.

14. Performance Bank Guaranty required to submit

5% of tender value for two years against cable joint

failure. Moreover, cable joint failure or end

termination failure will have to repair within 24 Hrs

for 2 years of guaranty period.

15. Fixing of mechanical protection HDPE pipe at

rising should be properly buried as per specification.

16. Fixing of Route marker strictly as per

File No: DGVCLSDUR/MSC/e-file/4523/2026/0057/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTU

Letter No: DGVCLSDUR/0064/01/2026 Approved Date: 08-01-2026

17. Minimum annual Turnover should be at least

tender estimated value and in addition to CVC

guideline narrated in tender for UG cable laying

18. Marking of feeder name, direction and location

on cable is compulsory during final scrutiny to

declare work completion.

19. End termination and straight joint kit should be

of premium quality as specified in Annexure-2.

Technical specifications for the same to be

submitted along with bid.

20. Cable straight joint should be done with mid

span joint instead of long barrel Lug.

21. Agreement with vendor of cable joint kit and End

termination kit to supply for this tender for concern

bidder should be submit at the time of bidding.

File No: DGVCLSDUR/MSC/e-file/4523/2026/0057/Billing

Approved By: Executive Engineer,Technical,DGVCLDSRTU