GE/863/EWS-T-25 OF 2021-22

Amount

Dismantling of Plain or corrugated steel sheeting, Pre-painted galvalume aluminium Zinc Coating sheets of any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Demolition of PCC block masonry built in any type of cement mortar incl all quoins ,arches, pillars etc complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness inclduding cover fillets complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Dismantling of wrought iron or mild steel work any description and fixed in any position complete all as specified and directed.

Taking down chowkats or frames not exc 1.5 sq.m each with shutters (without taking off shutters from the frames) and removing to store complete all as specified and directed.

Taking down chowkats or frames exc 1.5 sq.m but n.exc 4 sq.m each with shutters (without taking off shutters from the frames) and removing to store complete all as specified and directed.

Taking down Aluminium Shutters with frame of any description exceeding 1 Sqm but not exceeding 2 Sqm each and removing to store complete all as specified and directed.

Taking up or down 15 mm bore steel water tubing and connections including cleaning for refixing or removing to store complete all as specified and directed.

Taking up or down 20mm bore steel water tubing and connections including cleaning for refixing or removing to store complete all as specified and directed.

Dismantling water tanks of capacity exc 250 and n.exc 500 ltrs complete all as specified and directed.

Dismantling water tanks of capacity exc 500 but n. exc 1000 ltrs complete all as specified and directed.

Dismantling water tanks of capacity exc 1000 but n. exc 2000 ltrs complete all as specified and directed.

Taking down cement plastering of any description on brick or stone wall etc including raking out joints hacking for key scrubbing down with water etc and removal of debries and depositing where directed outside MD land complete all as specified and directed.

S&F rolled mild steel Fe -290(Gde E-165) for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed.

S&F Mild steel work as in compound girders and stanchions, latticegirders, aerial masts, staging for water tanks and like including caps bases, splices etc built up from two or more beam or channel sections or angles with plates or pipe section including all lattice bars, stiffeners, gusset plates etc..(Fe-410-W(Gde E-250)Quality-A) complete all as specified and directed.

S&F 0.63 mm thick galvanised corrugated mild steel sheeting with two corrugation side lap fixed with L type or J type or cranked hook bolts in roofs, walls etc with grade of zinc coating 275 complete all as specified and directed.

S & F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick, of coloured as approved, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F for Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick, of coloured as approved, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F 0.80 mm thick plain galvanised mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

M &L for pre-cast cement concrete type C1 1:3:6 using 20mm graded stone aggregate as in block masonry with solid blocks, exc 10cm in width and setting in cement mortar 1:6 complete all as specified and directed.

S&F anodised aluminium snap grid frame work for false ceiling of size of grid 605 x 605 mm including hangers, cleats, fasteners and hangers 6 mm dia GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of GI flat 40 X 3 mm size 60 mm long complete all as specified and directed.

S&F Exposed metal frame ceiling with 8mm thick calcium silicate board of silicious and calcareous material reinforced with cellulose fibre for fixing in 600mmX600mm grid complete all as specified and directed. NOTE (frame work for ceiling shall be measured and paid seprately)

M&L for 25mm thick PCC 1:2:4 type B0 using 12.50mm graded stone aggregates as in leveling course of flooring, including rough finished without using extra cement complete all as specified and directed.

M&L for Vitrified ceramic dark shade coloured tiles 10mm thick square/rectungular, polished, area of each tile not exceeding 0.36 Sqm in floor laid over and including 15 mm thick screed bed in CM 1:6 as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

All as per Item No 26 above but as in skirting/dados over and including 10mm thick rendering in CM 1:4.

S&F Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match laid over and including screed bed or bedding layer 15 mm thick, in cement morter 1:6 for laying floor finishes to receive floor tiles complete all as specified and directed.

M & L for Coloured Glazed ceramic tiles 350 x 250 x 7 mm / 450x350x7mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for 75mm thick cement concrete type D2, 1:4:8 (using 40mm graded stone aggregate) as in sub base of path complete all as specified and directed.

M & L for Chequered cement concrete tiles 20cm x 20cm x 25 mm thick, laid over and including 15 mm thick screed bed in CM 1:6 as in floor etc. set and jointed in neat cement slurry and pointed in white or Coloured cement to match complete all as specified and directed.

M&L 50mm thick Cement concrete type C1, 1:3:6 (using 20 mm graded stone aggregate) as in plinth protections, finished even and smooth without using extra cement complete all as specified and directed.

S&F pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.

S & F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

M&L for providing cement concrete type C-0 1:3:6 (12.5 mm graded stone agg) as for pressed steel chowkhats complete all as specified and directed.

S&F 35mm thick flush shutter solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S & F 35 mm thick second class hard wood, plain framed , panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fixed to chowkhats complete all as specified and directed.

S & F 35 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Pt I Section 8, clause 8.24 (a) complete all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specification and drawing as per SSR Part-II 2020 complete all as specified and directed.

S&F factory made soilid panel PVC Door shutter 30mm thick (Style), consisting of frame made out MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail, & bottom rail; Panneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing as per SSR Part-II 2020 complete all as specified and directed.

S&F MS framed work such as in grills, gratings, etc with ends of bars shouldered or riveted framed guard bars and similar work confirming to Fe-290 Gde E- 165 complete all as specified and directed.

S&F powder coated aluminium frame of doors, windows, ventilators (minimum thickness of powder coating 50 micron) with one or more rebated including jointing cleats for fixing etc complete all as specified and directed.

S&F powder coated aluminium door shutters aluminium section weighing 0.55Kg/m and minimum thickness of powder coating 50 micron including necessary jointing cleats, glazing clips rubber neoprene packing, handles 2 Nose in each door, hinges, anodized aluminium snap beading screws etc complete all as specified and directed. Note: Glass shall be measured and paid saperately.

S&F Aluminum anodized frame of doors, windows, ventilators with one or more rebated including jointing cleats for fixing etc complete all as specified.

S&F anodized aluminium door shutters aluminium section weighing 0.55Kg/m including necessary jointing cleats, glazing clips rubber neoprene packing, handles 2 Nose in each door, hinges, anodized aluminium snap beading screws etc complete all as specified and directed. Note: Glass shall be measured and paid saperately.

S&F anodized aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed. Note: Glass shall be measured and paid saperately.

S&F Mortice brass lock vertical type size 100mm with 4 levers complete all as directed.

S&F in repairs heavy duty floor spring double action hydraulically regulated made up of min 1.25mm thick aluminum alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass other parts made of mild steel fixed in position, complete all as specified and as directed.

S&F in repairs aluminium (die cast) body door closer hydraulically regulated designation No 3, universal type suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded, complete all as specified and directed.

S&F 100mm butt hinges medium weight cold rolled mild steel fixed with mild steel screws or welded to angle frame, complete all as specified and directed.

S&F 100mm long extruded Aluminium alloy Butt hinges with galvanized mild steel hinge pin anodize and fixed, type B-21 complete all as specified and directed.

S & F 250 mm long Aluminium alloy, anodized, sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of truded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F 200mm long barrel tower bolt aluminum anodized extruded section fixed with cadmium plated screws complete all as specified and directed.

S&F 150mm long barrel tower bolt aluminum anodized extruded section fixed with cadmium plated screws complete all as specified and directed.

S&F 150 mm Aluminium handles, cast type, anodized complete all as specified and directed.

S&F 100 mm Aluminium handles, cast type, anodized complete all as specified and directed.

S & F 140mm Floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S & F in repairs 300mm MS ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S & F Galvanized mild steel wire cloth, 0.63 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed.

S & F plain sheet glass of 4.8 mm thick in Squares not exceeding 0.50 Sqm in each pane fixed complete all as specified and directed.

M & L for preparation of new or previously untreated wooden surface of any description not otherwise described and exc 10cm in width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed .

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S & F plain sheet glass of 4 mm thick in Squares not exceeding 0.50 Sqm in each pane with oil putty and clips complete all as specified and directed.

S & F plain sheet glass of 3 mm thick in Squares not exceeding 0.50 Sqm in each pane with oil putty and clips complete all as specified and directed.

Refixing old steel tubing of 15 mm bore and connections in new or old position (walls, ceilings, floors etc.) complete all as specified and directed.

S & F 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed.

Refixing old steel tubing of 20 mm bore and connections in new or old position (walls, ceilings, floors etc.) complete all as specified and directed.

S & F 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed.

S & F in repairs 15 mm bore fancy type Stop valves,cast copper alloy, chromimum plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F in repair Glass shelf with Sheet Glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S & F in repairs 15 mm bore Fancy type Chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 15mm bore pillar tap, cast copper alloy, with capstan heads, fancy type chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S &F in repairs brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repair Vitreous china wash down water closet pan (pedestal pattern), white, including flush pipe of polyethylene of low or high density or PVC 32 mm dia., including plastic water closet seat ,closed pattern with cover and hinging device and trap with connection complete all as specified and directed.

S&F in repairs Vitreous china Squatting pan , 'Orissa pattern, size 580x440 mm white, with integral foot rest excluding flushing cistern and flush pipe including connection to trap, to flushing pipe, anti-syphonage pipe, etc complete including making good to floor complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type flushing cistern, low level , white, with inlet ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern for 10 litres capacity complete all as specified and directed.

S&F in repair PVC Connections 15mm size with PTMT nuts of length 750 mm complete all as specified and directed.

S&F in repair PVC Connections 15mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repair vitreous china wash hand basin, white flat back size 550x400mm complete including necessary cutting for and pinning in ends of brackets ) including brackets and 750mm long PVC waste pipe 32mm bore & waste coupling 32mm dia of PTMT (half or full threaded) complete all as specified and directed.

S&F in repairs 19/20 mm dia curtain rods mild steel chromium plated with and including brackets, stops, roller etc, complete all as specified and directed.

S & F 500 ltr capacity rotational moulded polyethylene water storage tanks(cylindrical vertical with closed top) duly provided with necessary fittings/fixtures for connecting inlet, outlet, washout and overflow pipes, noisted incl ball brass valve, high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule 20 mm bore and fixed in position complete all as specified and directed.

S & F 1000 ltr capacity rotational moulded polyethylene water storage tanks(cylindrical vertical with closed top) duly provided with necessary fittings/fixtures for connecting inlet, outlet, washout and overflow pipes, noisted incl ball brass valve, high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule 20 mm bore and fixed in position complete all as specified and directed.

S & F 2000 ltr capacity rotational moulded polyethylene water storage tanks(cylindrical vertical with closed top) duly provided with necessary fittings/fixtures for connecting inlet, outlet, washout and overflow pipes, noisted incl ball brass valve, high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule 20 mm bore and fixed in position complete all as specified and directed.

M&L for 15mm thick rendering in CM (1:4) on external surfaces of brick work or concrete surface finished fair and even without using extra cement, complete all as specified and directed.

M&L for 10mm thick rendering in CM (1:6) on internal surfaces of brick work or concrete surfaces finished even and smooth without using extra cement, complete all as specified and directed.

M & L for preparation of new plastered surface of wall and applying two coats of cement base paint with alkali resistant priming paint complete all as specified and directed.

M & L for preparation of new plastered surface of wall and applying two coats of distemper oil emulsion over 2 mm thick wall care putty on walls complete all as specified and directed.

Net Contract Sum will be after deducting Sch Of Credit of Rs.1,36,464.00

R B TRADERS